News Release Information

12-1192-CHI

Thursday, June 21, 2012

Contacts

Technical information:
Media contact:
  • (312) 353-1138

Occupational Employment and Wages in Rockford, Ill. MSA – May 2011


Workers in the Rockford Metropolitan Statistical Area had an average (mean) hourly wage of $19.77 in May 2011, about 9 percent below the nationwide average of $21.74, the U.S. Bureau of Labor Statistics reported today. Regional Commissioner Charlene Peiffer noted that, after testing for statistical significance, wages in the local area were significantly higher than their respective national averages in 2 of the 22 major occupational groups: construction and extraction; and production. Eleven groups had significantly lower wages than their respective national averages, including management; computer and mathematical occupations; and business and financial operations.

When compared to the nationwide distribution, local employment was more highly concentrated in 2 of the 22 occupational groups: production, and transportation and material moving. Conversely, 11 groups had employment shares significantly below their national representation, including office and administrative support; computer and mathematical occupations; and business and financial operations. (See table A and box note at end of release.)

Table A. Occupational employment and wages by major occupational group, United States and the Rockford Metropolitan Statistical Area, and measures of statistical significance, May 2011
Major occupational group Percent of total employment Mean hourly wage
United States Rockford United States Rockford Percent difference (1)

Total, all occupations

100.0% 100.0% $21.74 $19.77* -9

Management

4.8 4.5 51.64 43.80* -15

Business and financial operations

4.8 3.4* 33.05 26.54* -20

Computer and mathematical

2.7 1.0* 37.85 30.06* -21

Architecture and engineering

1.8 1.6 37.08 31.61* -15

Life, physical, and social science

0.8 0.2* 32.44 31.15 -4

Community and social services

1.5 1.3* 21.07 19.20* -9

Legal

0.8 0.4* 47.30 47.17 (3)

Education, training, and library

6.6 6.5 24.46 24.06 -2

Arts, design, entertainment, sports, and media

1.3 1.1 25.89 18.05* -30

Healthcare practitioner and technical

5.9 7.0 34.97 33.51 -4

Healthcare support

3.1 3.3 13.16 13.43 2

Protective service

2.5 1.7 20.54 15.17* -26

Food preparation and serving related

8.7 8.2* 10.30 9.89* -4

Building and grounds cleaning and maintenance

3.3 2.7* 12.29 12.31 (3)

Personal care and service

2.8 2.3* 11.84 10.74* -9

Sales and related

10.6 9.9* 18.04 16.66* -8

Office and administrative support

16.7 14.4* 16.40 15.02* -8

Farming, fishing, and forestry

0.3 (2) 11.68 (2) (2)

Construction and extraction

3.9 2.8* 21.46 27.18* 27

Installation, maintenance, and repair

3.9 3.8 20.86 21.16 1

Production

6.5 14.7* 16.45 17.26* 5

Transportation and material moving

6.7 9.4* 15.96 15.93 (3)

Footnotes:
(1) A positive percent difference measures how much the mean wage in Rockford is above the national mean wage, while a negative difference reflects a lower wage.
(2) Estimate not released.
(3) Indicates a value of less than 1.0 percent.
* The percent share of employment or mean hourly wage for this area is significantly different from the national average of all areas at the 90-percent confidence level.

One occupational group—production—was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Rockford had 20,420 jobs in production, accounting for 14.7 percent of local area employment, significantly higher than the 6.5-percent share nationally. The average hourly wage for this occupational group locally was $17.26, measurably above the national wage of $16.45.

With employment of 4,650, team assemblers was the largest occupation within the production group, followed by machinists (2,650) and production worker helpers (1,250). Among the higher paying jobs were stationary engineers and boiler operators; and first-line supervisors of production and operating workers, with mean hourly wages of $31.86 and $27.99, respectively. At the lower end of the wage scale were pressers of textiles, garments, and related materials ($9.49) and laundry and dry-cleaning workers ($10.07).(Detailed occupational data for production are presented in table 1; for a complete listing of detailed occupations available go to www.bls.gov/oes/current/oes_40420.htm)

Location quotients allow for the exploration of an area’s occupational make-up by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Rockford Metropolitan Statistical Area, above average concentrations of employment were found in many of the occupations within the production group. For instance, tool and die makers were employed at 8.7 times the national rate in Rockford, and milling and planing machine setters, operators, and tenders of metal and plastic, at 7.7 times the U.S. average. On the other hand, welders, cutters, solderers, and brazers had a location quotient of 1.0 in Rockford, indicating that this particular occupation’s local and national employment shares were similar.

These statistics are from the Occupational Employment Statistics (OES) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Illinois Department of Employment Security. The OES survey provides estimates of employment and hourly and annual wages for wage and salary workers in 22 major occupational groups and nearly 800 detailed occupations for the nation, states, metropolitan statistical areas, metropolitan divisions, and nonmetropolitan areas.

OES wage and employment data for the 22 major occupational groups in the Rockford Metropolitan Statistical Area were compared to their respective national averages based on statistical significance testing. Only those occupations with wages or employment shares above or below the national wage or share after testing for significance at the 90-percent confidence level meet the criteria.

NOTE: A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.


Technical Note

The Occupational Employment Statistics (OES) survey is a semiannual mail survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. Guam, Puerto Rico, and the Virgin Islands also are surveyed, but their data are not included in this release. OES estimates are constructed from a sample of about 1.2 million establishments. Forms are mailed to approximately 200,000 establishments in May and November of each year for a 3-year period. The nationwide response rate for the May 2011 survey was 77.3 percent based on establishments and 73.3 percent based on employment. May 2011 estimates are based on responses from six semiannual panels collected over a 3-year period: May 2011, November 2010, May 2010, November 2009, May 2009, and November 2008. The sample in the Rockford Metropolitan Statistical Area included 1,713 establishments with a response rate of 78 percent. For more information about OES concepts and methodology, go to www.bls.gov/news.release/ocwage.tn.htm.

The May 2011 OES estimates mark the first set of estimates based in part on data collected using the 2010 Standard Occupational Classification (SOC) system. Nearly all the occupations in this release are 2010 SOC occupations; however, some are not. The May 2012 OES data will reflect the full set of detailed occupations in the 2010 SOC. For a list of all occupations, including 2010 SOC occupations, and how data collected on two structures were combined, see the OES Frequently Asked Questions online at www.bls.gov/oes/oes_ques.htm#Ques41.

Area definitions

The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget.

The Rockford, Ill. Metropolitan Statistical Area  includes Boone and Winnebago Counties.

Additional information

OES data are available on our regional web page at www.bls.gov/ro5/home.htm. If you have additional questions, contact the Chicago Economic Analysis and Information Unit at (312) 353-1880. Information in this release will be made available to sensory impaired individuals upon request. Voice phone: 202-691-5200; TDD message referral phone number: 1-800-877-8339.

OOH Earnings Table Extraction Wizard - output frame
Table 1. Employment and wage data from the Occupational Employment Statistics survey, by occupation, Rockford Metropolitan Statistical Area, May 2011
Occupation (1) Employment Mean wages
Level (2) Location quotient (3) Hourly Annual(4)

Production Occupations

20,4202.3$17.26$35,900

First-Line Supervisors of Production and Operating Workers

1,1301.927.9958,210

Electrical and Electronic Equipment Assemblers

700.417.1935,760

Electromechanical Equipment Assemblers

(5)(5)22.3446,460

Structural Metal Fabricators and Fitters

800.918.9739,460

Team Assemblers

4,6504.517.4236,240

Assemblers and Fabricators, All Other

3701.313.7628,620

Bakers

900.610.4221,670

Butchers and Meat Cutters

1100.814.3229,780

Computer-Controlled Machine Tool Operators, Metal and Plastic

6004.319.2039,930

Computer Numerically Controlled Machine Tool Programmers, Metal and Plastic

1004.419.9041,390

Extruding and Drawing Machine Setters, Operators, and Tenders, Metal and Plastic

801.016.7034,730

Forging Machine Setters, Operators, and Tenders, Metal and Plastic

1305.420.4142,450

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

701.918.0337,500

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic

7303.714.7330,630

Drilling and Boring Machine Tool Setters, Operators, and Tenders, Metal and Plastic

602.415.2631,740

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

4105.415.4332,090

Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic

3207.417.9737,380

Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic

1807.719.3140,150

Machinists

2,6506.716.7434,820

Metal-Refining Furnace Operators and Tenders

(5)(5)17.7036,820

Foundry Mold and Coremakers

504.013.7528,600

Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic

(5)(5)20.6242,900

Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic

2102.613.2427,540

Tool and Die Makers

6608.721.3444,400

Welders, Cutters, Solderers, and Brazers

3601.018.0737,590

Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders

(5)(5)16.3233,940

Heat Treating Equipment Setters, Operators, and Tenders, Metal and Plastic

1205.215.9933,270

Plating and Coating Machine Setters, Operators, and Tenders, Metal and Plastic

1203.512.2425,450

Tool Grinders, Filers, and Sharpeners

403.015.8332,930

Metal Workers and Plastic Workers, All Other

1004.118.0237,470

Prepress Technicians and Workers

1002.215.6132,460

Printing Press Operators

1100.619.0239,560

Print Binding and Finishing Workers

1001.613.3327,720

Laundry and Dry-Cleaning Workers

2501.210.0720,950

Pressers, Textile, Garment, and Related Materials

(5)(5)9.4919,730

Sewing Machine Operators

(5)(5)11.1023,090

Cabinetmakers and Bench Carpenters

500.616.6534,640

Woodworking Machine Setters, Operators, and Tenders, Except Sawing

1001.611.4623,840

Stationary Engineers and Boiler Operators

(5)(5)31.8666,270

Water and Wastewater Treatment Plant and System Operators

500.424.2450,410

Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders

(5)(5)16.5034,330

Grinding and Polishing Workers, Hand

702.315.1431,490

Mixing and Blending Machine Setters, Operators, and Tenders

(5)(5)20.3042,220

Cutting and Slicing Machine Setters, Operators, and Tenders

1001.614.9331,050

Inspectors, Testers, Sorters, Samplers, and Weighers

1,1202.418.0737,580

Dental Laboratory Technicians

401.018.5038,480

Packaging and Filling Machine Operators and Tenders

4401.115.7432,730

Coating, Painting, and Spraying Machine Setters, Operators, and Tenders

3704.514.2829,700

Painters, Transportation Equipment

1102.2(5)(5)

Photographic Process Workers and Processing Machine Operators

601.011.4323,780

Paper Goods Machine Setters, Operators, and Tenders

800.815.4532,130

Helpers--Production Workers

1,2502.711.6624,250

Production Workers, All Other

4601.815.3031,830

Footnotes:
(1) For a complete listing of all detailed occupations in Rockford, IL, see www.bls.gov/oes/current/oes_40420.htm
(2) Estimates for detailed occupations do not sum to the totals because the totals include occupations not shown separately. Estimates do not include self-employed workers.
(3) The location quotient is the ratio of the area concentration of occupational employment to the national average concentration. A location quotient greater than one indicates the occupation has a higher share of employment than average, and a location quotient less than one indicates the occupation is less prevalent in the area than average.
(4) Annual wages have been calculated by multiplying the hourly mean wage by a ‘year-round, full-time’ hours figure of 2,080 hours; for those occupations where there is not an hourly mean wage published, the annual wage has been directly calculated from the reported survey data.
(5) Estimate not released.

 

Last Modified Date: June 21, 2012