Former Electro-Therm Inc. Facility
Update: After January 6, 2017, information about this RCRA Corrective Action site
will be available at:
Corrective Action Sites Around the Nation - Region 3
(Search for the Facility by Name, Location, or EPA ID)
Please be sure to update your bookmarks.
On This Page
EPA ID:MDD043375757
Location:
Route 404
West Denton, MD 21629
Property Area 13.7 acres
Congressional District:
Other Names: FIL Inc (USA)
FINAL UPDATE
Contacts
EPA Project Manager
Mr. Leonard Hotham
U.S. Environmental Protection Agency Region 3
Mail Stop: 3LC20
1650 Arch Street
Philadelphia, PA 19103-2029
Phone: (215) 814-5778
Email:hotham.leonard@epa.gov
Maryland Department of Environment
Waste Management Administration
Mr. Art O’Connell
1800 Washington Boulevard
Baltimore, MD 21230
Phone: (410) 537-34932
Email: : aoconnell@mde.state.md.us
Bulletin Board
Site Status
- Cleanup Status :
Complete With Controls - Human Exposure Controlled:
YES - Groundwater Controlled :
YES - Institutional Controls YES
Status
-
A notice was published in the Capital Gazette newspaper on May 23, 2014, detailing the proposed Agency remedy decision. Minor comments were received on the proposed decision.
The Final Decision for the site was signed by EPA on August 20, 2014. EPA's final remedy consists of requiring the Facility to maintain a groundwater monitoring program and to implement and maintain groundwater use restrictions through Institutional Controls (ICs). - Corrective Action activities at the former Electro-Therm facility (Site), now owned by FIL [US] Inc. (FIL), are being conducted under the provisions of Maryland Department of the Environment (MDE) Consent Order No. CO-88-094 (CO), in cooperation with the United States Environmental Protection Agency (EPA) Region III. A site meeting between FIL, MDE, and EPA Region III was held on September 10, 2008, to discuss the steps needed to satisfy both regulatory programs. FIL submitted a work plan addressing the Site's remaining data gaps in 2009, and field work was conducted in 2010. MDE and EPA will be meeting with FIL in early 2013 to discuss any remaining data gaps and/or remedial endpoint strategies for the facility.
Background
- The former Electro-Therm facility is a 13.7 acre industrial property situated between Route 404 and Meetinghouse Road in Denton, Maryland. Historical land use in the period prior to 1988 included the manufacture of electronic devices by Electro-Therm Inc. A pump and treat system was installed in 1988 for remediation of Volatile Organic Compounds (VOCs), primarily 1,1,1-trichloroethane and trichloroethene, present in shallow groundwater.
Contaminants and Risks
- The primary contaminants are volatile organic compounds ), primarily 1,1,1-trichloroethane and trichloroethene, present in shallow groundwater.
Institutional Controls
Restrictions or Controls that Address: | Yes | No |
---|---|---|
Groundwater Use |
X |
|
Residential Use |
X |
|
Excavation |
X |
|
Vapor Intrusion |
X |
|
Capped Area(s) |
X |
|
Other Engineering Controls |
X |
|
Other Restrictions |
X |
The Institutional Controls and Maryland Well Construction Regulations (Title 9,Subtitle 13) & Maryland COMAR 26.04.04 regulate the use of groundwater and also require vapor instrustion controls on each new structure above the contaminated groundwater plume or within 100 feet of the perimeter of the contaminated groundwater plume.
Documents and Reports
- Some of the site’s key documents of interest are accessible below:
- Corrective Action Final Decision & Response to Comments[ 20 pp 1136 KB, About PDF]
- Corrective Action Statement of Basis [ 12 pp 746 KB, About PDF]
- Corrective Action Uniform Environmental Covenant -Deed Restriction [ 15 pp 4.3 MB, About PDF]
- Environmental Indicator Determination - Human Exposures [ 8pp 298 KB, About PDF]
- Environmental Indicator Determination - Groundwater Migration [ 8pp 328 KB, About PDF]
- All documents and reports regarding this facility also can be reviewed in person at these locations:
U.S. EPA Region III
Land & Chemicals Division - RCRA
1650 Arch Street-11th Floor
Philadelphia, PA 19103
(215) 814-5778
Call for an appointment.
- Submit a FOIA Request
Get instructions on how to submit a FOIA request. Additional fee for requests over 100 pages.
Photos, Maps and Diagrams
Electro-Therm Inc | Electro-Therm Geospatial Pdf Map |
Click on a thumbnail to enlarge the photo or Geospatial Pdf )
Reuse Information
- Future site use is to be deterimined.
Questions
- The EPA is dedicated to providing you with timely and accurate information about our work at this site. If you have any questions or concerns, please contact the EPA Project Manager:Mr. Leonard Hotham (215)-814-5778.