Rules and Implementation
The Clean Air Act requires EPA to regulate emissions of toxic air pollutants from a published list of industrial sources referred to as "source categories." As required under the Act, EPA has developed a list of source categories that must meet control technology requirements for these toxic air pollutants. The EPA is required to develop regulations (also known as rules or standards) for all industries that emit one or more of the pollutants in significant quantities. NOTICE announcing that EPA has completed the emission standards required by sections 112(c)(3) and (k)(3)(B) and 112(c)(6) of the Clean Air Act (CAA). |
National Emission Standards for Hazardous Air Pollutants Information |
National Emission Standards for Hazardous Air Pollutants Rules
Rule
Information |
Residual Risk/Technology Rules
Area Source General Information and Implementation Tools (CAA, Section 112(k))
Solid Waste Rules (Sections 129/111(d) Rules)
- Solid Waste Combustion
- Sewage Sludge Incinerator rule (SSI)
- Hospital/Medical/Infectious Waste Incineration (HMIWI)
- Municipal Waste Combustors (MWC) - Large Units
- Municipal Waste Combustors -Small Units
- Commercial/ Industrial Waste Incinerators (CIWI)
- Other Solid Waste Incinerators
Selected New Source Performance Standards (NSPS) [these are criteria pollutant regulations]
Note that the General Provisions apply.
- Archived Clean Air Mercury Rule
- Electric Utility Generating Units
- Boilers (Steam Generating Units)
- Diesel Engines (Compression Ignition Internal Combustion Engines)
- Petroleum Refineries
- Portland Cement
- SOCMI Wastewater
- Municipal Solid Waste Landfills
- Stationary Combustion Turbines
- Stationary Spark Ignition Internal Combustion Engines
- Consumer and Commercial Products: Schedule for Regulation
- National Emission Standards for Architectural Coatings
- National Emission Standards for Consumer Products
- National Emission Standards for Automobile Refinish Coatings
- EnviroFlash sign up
- Title 40-Part 63 listings by Subpart - National Emission Standards for Hazardous Air Pollutants for Source Categories
- The Air and Radiation Docket and Information Center
- Certain CFR updates
- Operating Permits (Title V)
- Government
Printing Office (GPO)
- Potential to Emit (PTE)
- Consolidated Federal Air Rule for the Synthetic Organic Chemical Manufacturing Industry (CAR)
- Compliance Assurance Monitoring(CAM)(pre-1990 rules)
- Applicability Determination Index (ADI)
- 112(a) - Definitions
- 112(b) - List of Pollutants
- 112(c) - List of Source Categories
- 112(c)(6) - Source Category Listing for Seven Specific Pollutants
- 112(c)(7) - Research & Development Sources
- 112(d) - Emission Standards
- 112(e) - Schedule for Standards and Review
- 112(f) - Standards to Protect Health and the Environment (Residual Risk/Technology Program)
- 112(g) - Modifications, Construction, and Reconstruction
- 112(h) - Work Practice Standards
- 112(i) - Schedule for Compliance for New Sources, Early Reduction Program
- 112(j) - Equivalent Emission Limitation by Permit "MACT Hammer"
- 112(k) - Urban Air Toxics Strategy
- 112(l) - State Programs: Delegation of Implementation & Enforcement Authority
- 112(m) - Atmospheric Deposition to Great Lakes & Coastal Waters &Reports to Congress
- 112(n) - Studies: Utilities, Coke Ovens, POTWs, Mercury, Hydrogen Sulfide
- 112(o) - National Academy of Sciences Study on Risk Assessment
-
112(p) - Mickey Leland National Urban Air Toxics
Research Center
- 112(q) - Savings Provision
- 112(r) - Prevention of Accidental Releases
- 112(s) - Periodic Reports on Measures Taken to Implement Section 112
Region 7 New Source Review Policy and Guidance
Section 183(e) Rules for Volatile Organic Compounds (VOC)
Other
Implementation
Information |
Implementation Materials
Urban
Air Toxics Strategy |
Overview of Air Toxics Requirements |
These links provide a brief description of the sections of the Clean Air Act related to air toxics as well as further links to relevant rules, reports, and programs. A concise overview is available.