| |
Materials for DE
BIBLIOGRAPHY
Not
all references can be accessed from this website. References for the following topics are
listedin alphabetical order by author:
Recuperators:
Alloy Development and Characterization
Betchen, L. J., Straatman, A. G., “Interface conditions for a non-equilibrium heat transfer model for conjugate fluid/porous/solid domains,” The 13th Annual Conference of the CFD Society of Canada, St. John’s, Canada, July 2005. (PDF 224KB)
Betchen, L. J., Straatman, A. G., Thompson, B. E., “A non-equilibrium finite-volume model for conjugate fluid/porous/solid domains,” Accepted in Numerical Heat Transfer, Part A, July 2005. N. D. Evans, P.J. Maziasz, and J.P. Shingledecker, “Creep-Testing Foils and Sheets of Alloy 625 for Microturbine Recuperators,” 6th International Superalloys Symposium, October, 2005, Pittsburgh, PA. (PDF 5,644KB)
N.D. Evans, P.J. Maziasz, Y. Tamamoto, and J.P. Shingledecker, "Electron Microscopy of Heat-Resistant Alloy Sheets and Foils Being Considered for Use in Recuperators," in Microscopy & Microanalysis 11 (2) p. 1714-15, 2005.
N.D. Evans, P.J. Maziasz and L.R. Walker, “Microstructure and Microanalysis of Ni-Based Superalloy Exhaust Valves,” Proc. Microscopy and Microanalysis 2004, vol. 10 (suppl. 2) 2004, Microscopy Society of America, pp. 654-655. E. Lara-Curzio, R. Trejo, K.L. More, P.J. Maziasz, and B.A. Pint, "Evaluation and Characterization of Iron- and Nickel-Based Alloys for Microturbine Recuperators," ASME PAPER #GT2005-68630, presented at IGTI TurboExpo 2005, Reno, NV, June, 2005. (PDF 2,056KB)
Lara-Curzio, E., Trejo, R. M., More, K. L., Dryepondt, S., Maziasz, P. A. and Pint. B. A., “Screening and Evaluation of Materials for Advanced Microturbine Recuperators,” ASME Presentation, Reno, Nevada, June 2005. (PPT 11,333 KB)
E. Lara-Curzio, R. Trejo, K.L. More, P.A. Maziasz, and B.A. Pint, “Screening and Evaluation of Materials for Microturbine Recuperators,” ASME Paper #GT2004-54254, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Vienna, Austria, June 14-17, 2004. (PDF 1,707KB)
Lara-Curzio, E., Trejo, R. M., More, K. L., Maziasz, P. A. and Pint. B. A.,”Screening and Evaluation of Materials for Advanced Microturbine Recuperators,” ASME Presentation, Vienna, Austria, June 2004. (PPT 13,145 KB)
Lara-Curzio E., Maziasz, P. J., Pint B. A.., "Test Facility for Screening and Evaluating Candidates Materials for Advanced Microturbine Recuperators," ASME Technical Paper GT 2002- 30581. (PDF 359KB)
Lara-Curzio, E. , Maziasz, P. J., Pint, B. A., Stuart, M., Hamrin, D., Lipovich, N., DeMore, D., "Test Facility for Screening and Evaluating Candidates Materials for Advanced Microturbine Recuperators," ASME Presentation, Amsterdam, The Netherlands, June, 2002. (PDF 979KB)
P.J. Maziasz, J.P. Shingledecker, B.A. Pint, N.D. Evans, Y. Yamamoto, K.L. More, and E. Lara-Curzio, "Overview of Creep Strength and Oxidation of Heat-Resistant Alloy Sheets and Foils for Compact Heat Exchangers," ASME PAPER #GT2005-68297, presented at IGTI TurboExpo 2005, Reno, NV, June, 2005. (PDF 1,342KB)
P.J. Maziasz, B.A. Pint, J.P. Shingledecker, K.L. More, N.D. Evans, and E. Lara-Curzio, “Austenitic Stainless Steels and Alloys With Improved High-Temperature Performance for Advanced Microturbine Recuperators,” ASME paper #GT2004-54239, presented at IGTI Turbo Expo 2004, Vienna, Austria, June 14-16, 2004. (PDF 1,738KB)
P.J. Maziasz, J.P. Shingledecker, B.A. Pint, N.D. Evans, Y. Yamamoto, K.L. More, and E. Lara-Curzio, “Overview of Creep Strength and Oxidation of Heat-Resistant Alloy Sheets and Foils for Compact Heat-Exchangers,” GT2005-68927, ASME Turbo Expo 2005, June 2004, Reno, Nevada. (PDF 2,133KB)
Maziasz, P.J., Pint, B.A., Swinderman, R.W., More, K.L., Lara-Curzio E., "Advanced Stainless Steels and Alloys for High Temperature Recuperators," ASM Distributed Energy Resources Conference Presentation, Oct 2002, Columbus, OH. (PDF 6,145KB)
Maziasz, P. J., Swindeman, R. W., Shingledecker, J. P. More, K.L. Pint, B. A., Lara-Curzio, E., and Evans, N.D., “Improving High-Temperature Performance of Austenitic Stainless Steels for Advanced Microturbine Recuperators,” Parsons 2003: Engineering Issues in Turbine Machinery, Power Plants and Renewables, 1057-1073 (2003). (PDF 1,078KB)
Maziasz,
P. J., Pint, B. A., Swindeman, R. W., More, K. L., Lara-Curzio E.,
"Advanced Stainless Steels and Alloys for High Temperature
Recuperators," presentation to the CEA at ORNL Feb, 2003 (PDF
2.98MB)
Maziasz,
P. J., Swindeman, R. W., "Selecting and Developing Advanced
Alloys for Creep-Resistance for Microturbine Recuperator Applications," ASME Technical paper, 2001-GT541 (PDF
80KB)
K.L. More, P.F. Tortorelli, T. Bhatia, and G.D. Linsey, “Evaluating the Stability of BSAS-Based EBCs in High Water-Vapor Pressure Environments,” ASME Paper #GT2004-53863, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Vienna, Switzerland, June 14-17, 2004.
B. A. Pint, K. L. More, R. Trejo and E. Lara-Curzio, (2006) “Comparison of Recuperator Alloy Degradation in Laboratory and Engine Testing,” ASME Paper #GT2006-90194, to be presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Barcelona, Spain, May 8-11, 2006.
(PDF 261KB)
B.A. Pint and P.J. Maziasz, "Development of High Creep Strength and Corrosion-Resistant Stainless Steels," NACE Paper #05-449, presented at NACE Corrosion 2005, Houston, TX, April 2005. (PDF 326KB)
B.A. Pint, "The Effect of Water Vapor on Cr Depletion in Advanced Recuperator Alloys," ASME PAPER #GT2005-68495, presented at IGTI TurboExpo 2005, Reno, NV, June, 2005. (PDF 192KB)
B. A. Pint and K. L. More, (2004) "Stainless Steels with Improved Oxidation Resistance for Recuperators,” ASME Paper #GT2004-53627, presented at the International Gas Turbine & Aeroengine Congress & Exhibition, Vienna, Switzerland, June 14-17, 2004.
B.A. Pint, "The Long Term Performance of Model Austenic Alloys in Humid Air," NACE Paper 04-530, Houston, TX, presented at NACE Corrosion 2004, New Orleans, LA, March 2004. (PDF 190KB)
B.A. Pint, R. Peraldi, and P.J. Maziasz, "The Use of Model Alloys to Develop Corrosion-Resistant Stainless Steels," Materials Science Forum, 461-4, 815-822 (2004).
Pint,
B. A., Peraldi, R., Tortorelli, P. F., "The Effect of Alloy
Composition on the Performance of Stainless Steels in Exhaust Gas
Environments," 2003 NACE Paper 03-499, Houston, TX, presented
at NACE Corrosion 2003, San Diego, CA, March 2003. (PDF
197KB)
Pint,
B. A., Peraldi, R., "Factors Affecting Corrosion Resistance
of Recuperator Alloys," 2003 ASME Paper GT2003-38692, presented
at the International Gas Turbine & Aeroengine Congress & Exhibition, Atlanta, GA, June 2-5, 2003. (PDF
126KB)
Pint,
B. A., More, K. L., Tortorelli, P. F., "The Effect of Water
Vapor on Oxidation Performance of Alloys Used in Recuperators,"
ASME Paper 2002-GT-30543, presented at the International Gas Turbine
& Aeroengine Congress & Exhibition, Amsterdam, Netherlands,
June 3-6, 2002. (PDF
944KB)
Peraldi,
R., Pint, B., "Effect of Cr and Ni Contents on the Oxidation
Behavior of Ferritic and Austenitic Model Alloys," TMS, 2002.
(PDF
2.6MB)
Peraldi,
R., Pint, B., "Effects of Cr and Ni contents on High Temperature
Oxidation of Stainless steels in mixed Air and Water Vapor," TMS, February, 2002. (PDF
3.45MB)
Straatman, A. G., Gallego, N. C., Yu, Q., Thompson, B. E., “Characterization of porous carbon foam as a material for compact recuperators,” Accepted for presentation at ASME Turbo Expo 2006, Barcelona, Spain, May 2006.
Straatman, A. G., Gallego, N., Thompson, B. E., Hangan, H., “Thermal Characterization of Porous Carbon Foam – Convection in Parallel Flow,” Accepted in Int. J. Heat Mass Transfer, December 2005.
D.J. Young and B.A. Pint, "Chromium Volitilization Rates from Cr2O3 Scales Into Flowing Fases Contining Water Vapor," accepted for publication in Oxidation of Metals.
Yu, Q, Straatman, A. G., Thompson, B. E., “Carbon-Foam Finned Tubes in Air-Water Heat Exchangers,” Applied Thermal Engineering, 26, 131-143, 2006. (PDF 514KB)
Yu, Q., Thompson, B. E., Straatman, A. G., “A Unit Cube-based Model for Heat Transfer and Flow in Porous Carbon Foam,” Accepted in ASME J. Heat Transfer, October 2005.
Yu, Q., Thompson, B. E., Straatman, A. G., “Carbon Foam – New Generation of Enhanced Surface Compact Recuperators for Gas Turbines,” Proceedings of ASME Turbo Expo 2005, Reno-Tahoe, Nevada, June 6-9, 2005. (PDF 281KB)
Yu, Q., Thompson, B. E., Straatman, A. G., “Thermal Engineering Model of a Heat Exchanger with Finned-Tubes Made from Porous Carbon Foam,” CSME Forum 2004, The University of Western Ontario, London, Canada, June 2004. (PDF 415KB)
Environmental
Effects and Coatings Development for Ceramics and Ceramic Matrix
Composites
Armstrong, B. L., “Slurry Deposition of Environmental Protection Systems,” presented at the Environmental Barrier Coatings Workshop, Nashville TN, November 16, 2005. (PDF 12,951KB)
Armstrong, B. L. and G. Kirby, “Slurry-based Environmental Protection Systems,” presented at the Environmental Barrier Coatings Workshop, Nashville, TN, November 16, 2005. (PDF 2,780KB)
Armstrong,
B. L., Cooley, K. M., Hayes, J. A., Lin, H. T., Surry Based Environmental
Barrier Coating (EBC) Concepts," presented at the Environmental
Barrier Coatings Workshop, Nashville TN, November 6, 2002. (EBC Workshop PDF)
M. P. Brady, B. L. Armstrong, H. T. Lin HT, M. J. Lance, K. L. More, L.R. Walker, F. Huang, and M. L. Weaver., “Feasibility Assessment of Self-Grading Metallic Bond Coat Alloys for EBCs/TBCs to Protect Si-Based Ceramics,” SCRIPTA MATERIALIA 52 (5): 393-397, March 2005. (PDF 411KB)
M. P. Brady, P. F. Tortorelli, K. L. More, E. A. Payzant, B. L. Armstrong, H. T. Lin, M. J. Lance, F. Huang, and M. L. Weaver, "Coatings and near-surface Modification Design Strategies for Protective and Functional Surfaces," Metals and Corrosion 56(11) 748-755. (PDF 363KB) Carruthers,
D., "Coatings for Si3N4 and SiC Ceramics, an Historical Perspective," presented at the DOE/ORNL Environmental Barrier Coatings Workshop,
Nashville TN, November 6-7, 2002. (EBC Workshop PDF)
Eaton,
H., Linsey, G., Sun. E., More, K., Kimmel, J., Price, J. R., Miriyla,
N., "EBC Protection of SiC/SiC Composites in the Gas Turbine
Combustion Environment – Continuing Evaluation and Refurbishment
Considerations," ASME 2001-GT-0513. Proceedings of the ASME
Turbo Expo, 2001, June 4-7, 2001, New Orleans, LA. (PDF
8.98MB)
Ferber,
K., Guiheen, J., Li, C. W., Chan, H., Harmer, M., Wu, S., Moldovan,
M., Weyant, C., Ferber, M., More, K., "Tantalum Oxide-Based
Environmental Barrier Coatings," presented at the DOE/ORNL
Environmental Barrier Coatings Workshop, Nashville TN, November
6-7, 2002. (EBC Workshop PDF)
Ferber,
M. K., Lin, H. T., "Mechanical Properties Characterization
of EBCs," presented at the DER/ORNL Environmental Barrier
Coatings Workshop, Nashville, TN, November 6-7, 2002. (EBC Workshop PDF)
Ferber,
M. K., Lin, H. T., Parthasarathy, V., Wenglarz, R., "Degradation
of Silicon Nitrides in High Pressure, Moisture Rich Environments,"
ASME GT2000-661, Proceedings of 2000 ASME Turbo Expo, Land, Sea
& Air, May 8-11, Munich, Germany. (PDF
199KB)
Ferber,
M. K., Lin, H. T., Keiser, J., "Oxidation Behavior of Non-Oxide
Ceramics in a High-Pressure, High-Temperature Steam Environment,
Mechanical, Thermal and Environmental Testing and Performance of
Ceramic Composites and Components," ASTM STP 1392, M. G Jenkins,
E. Lara-Curzio, S.T. Gonczy, Eds., American Society for Testing
and Materials, West Conshohocken, PA, 2000. (PDF
306KB)
Ferber,
M. K., Lin, H. T., Parthasarathy, V., Brentnall, W., "Degradation
of Silicon Nitrides in High Pressure, Moisture Rich Environments,"
ASME GT 1999-0000, Proceedings of 1999 ASME Turbo Expo, Land, Sea
& Air, June 7-10, Indianapolis, Indiana, 1999. (PDF
993KB)
Holoczak,
J., Sun, E., Eaton, H., "EBC and Material Requirements for
Microturbines – A Detailed Analysis," presented at the DOE/ORNL
Environmental Barrier Coatings Workshop, Nashville TN, November
6-7, 2002. (EBC Workshop PDF)
N.S. Jacobson, D.S. Fox, J.L. Smialek, E.J. Opila, P.F. Tortorelli, K.L. More, K.G. Nickel, T. Hirata, M. Yoshida, and I. Yuri, “Corrosion Issues for Ceramics in Gas Turbines,” pp. 607-40 (Chapter 26) in Ceramic Gas Turbine Component Development and Characterization, M. Van Roode, M.K. Ferber, and D.W. Richerson (eds.), ASME Press, New York, 2003.
Jones,
R. H., Henager, C. H. Jr., Tortorelli, P. F., "Elevated-Temperature
Environmental Effects of Oxygen on SiC/SiC Composites," JOM
45, no. 12, (1993) 26-29.
G. Kirby, K. Cooley, and B. Armstrong, “Tailored Rheological Behavior of Mullite and BSAS Suspensions Using a Cationic Polyelectrolyte”, Proceedings of GT2005 ASME Turbo Expo 2005: Power for Land, Sea, and Air, Reno-Tahoe, NV. (PDF 1,545KB)
Kirby, G., Cooley, K. M., Lin H.T. and Armstrong, B. L., “Deposition of Environmental Protection Systems from Collodal Suspension,” Presented at the Industrial Gas Turbine Institute ASME Turbo Expo, Power for Lands, Sea, and Air, June 6, 2005. (PDF 4,531KB)
Lara-Curzio,
E., Ferber, M. K., Tortorelli, P. F., More, K. L., "Interface
Oxidation and Stress-Rupture of Nicalon/SiC CFCCs at Intermediate
Temperatures," Key Eng. Mater. 127-131 (1997) 1069-82.
Lewinsohn,
C., Nair, B., "Two concepts for EBC coatings with low silica
activity: geomimetic compositions and coatings derived from polymer
precursors," presented at the DOE/ORNL Environmental Barrier
Coatings Workshop, Nashville TN, November 6-7, 2002. (EBC Workshop PDF)
Mitchell,
D., Luthra, K., Meschter, P., Corman, G., Johnson, C., Sarrafi-Nour,
R., "EBC Development for Turbomachinery," presented
at the DOE/ORNL Environmental Barrier Coatings Workshop, Nashville
TN, November 6-7, 2002. (EBC Workshop PDF )
Miriyala,
N., Kimmel, J., Price, J., More, K., Tororelli, P., Eaton, H., Linsey,
Sun, E., "The Evaluation of CFCC Liners After Field Testing
in a Gas Turbine – III, " ASME GT 2002-30585, Proceedings
of the ASME Turbo Expo, 2002, June 3-6, 2002, Amsterdam, The Netherlands.
(PDF
1.44MB)
More, K.L., P.F. Tortorelli, T. Bhatia, and G.D. Linsey, “Evaluating the Stability of BSAS-Based EBCs in High Water-Vapor Pressure Environments,” paper GT2004-53863 in Proc. 49th ASME Turbo Expo, ASME International, 2004. (PDF 537KB)
More,
K., Tortorelli, P., " Verification of an EBC’s Protective
Capability by First-Stage Evaluation in a High Temperature, High
Pressure Furnace, " ASME Technical Paper GT2003-38923, To
be published in the Proceedings of 2003 ASME Turbo Expo Power for
Land, Sea, & Air, June 16-19, 2003, Atlanta GA. (PDF
1.0MB)
More,
K. L., Tortorelli, P. F., Walker, L. R., Miriyala, N., Price, J.
R., van Roode, M., "The High-Temperature Stability of SiC-Based
Composites in High Water-Vapor Pressure Environments," submitted
for publication in J. Am. Ceram. Soc., 2003.
More,
K., Tortorelli, P., "Evaluation of EBCs in ORNL’s Keiser
Rig," presented at the Environmental Barrier Coatings Workshop,
Nashville TN, November 6-7, 2002. (EBC
Workshop PDF 3.57MB)
More,
K., Tortorelli, P., Walker, L., Eaton, H., Sun, E., Linsey, G.,
Kimmel, Miriyala, N., Price, J., "EBCs For Ceramic Matrix
Composite Combustor Liners Used in Stationary Gas Turbines," presented at the 2002 ACerS Annual Meeting, April 30, 2002, St.
Louis, MO. (PDF
9.85MB)
More,
K., Tortorelli, P., Walker, L., Trent, K. S., Eaton, H., Sun, E.,
Linsey, G., Miriyala, N., Kimmel, J., Price, J., Ellingson, W.,
Sun, J., Landini, D., Craig, P., "Recent Evaluation of CFCC
Combustor Liners With Environmental Barrier Coatings (EBC) After
A ~14,000 h Engine Test," presented at the ASME Turbo Expo
2001, June 5, 2001, New Orleans, LA. (PDF
11.66MB)
More,
K., Tortorelli, P., Walker, L., Miriyala, N., Price, J., van Roode,
M., Eaton, H., Sun, E., Linsey, G., "The High-Temperature
Stability of SiC-Based Composites in High H2O Pressure Environments," presented at the TMS Annual Meeting, Seattle, WA, February
19, 2002. (PDF
8.76MB)
More,
K., Tortorelli, P., Walker, L., Kimmel, J, Miriyala, N., Price.
J., Eaton, H., Sun, E., Linsey, "Evaluating Environmental
Barrier Coatings on Ceramic Matrix Composites After Engine and Laboratory
Exposures," ASME GT-2002-30630, Proceedings of ASME Turbo
Expos 2002, June 3-6, 2002, Amsterdam, The Netherlands. (PDF
600KB)
More,
K.., Tortorelli, P., Ferber, M., Keiser, J., "Observations
of Accelerated Silicon Carbide Recession by Oxidation at High Water-Vapor
Pressures," J. Am. Ceram. Soc., 83 [1] 211-13 (2000). (PDF
279KB)
More,
K., Tortorelli, P., Walker, "Effects of High Water Vapor Pressure
on the Oxidation of SiC-Based Fiber-ReinforcedComposites,"
Mat’l Sci Forum, 369-372 (2001) 385-94. (PDF
403KB)
More,
K., Tortorelli, P., Miriyala, N., Brentnall, W., Price. J., "Exposure
of Ceramics and Ceramic Matrix composites in Simulated and Actual
Combustor Environments," 99-GT-292. Proceedings of the 1999
ASME Turbo Expo Power for Land, Sea & Air, June 6-10, 1999,
Indianapolis, IN. (PDF
950KB)
More,
K. L., Tortorelli, P. F., Lin, H. T. Lara-Curzio, E., Lowden, R.
A. "Degradation Mechanisms of BN Interfaces in SiC/SiC Composites
in Oxygen- and Water-Containing Environments," pp. 382-94
in High-Temperature Corrosion and Materials Chemistry, P. Y. Hou,
M. J. McNallan, R. Oltra, E. J. Opila, and D. A. Shores (eds.),
The Electrochemical Society, Pennington, NJ, 1998.
More,
K. L., Tortorelli, P. F., Lowden, R. A., "Oxidation-Induced
Microstructural Changes in Fiber-Reinforced SiC," pp. 683-94
in Microscopy of Oxidation 3, S. B. Newcomb and J. A. Little (eds.),
The Institute of Materials, London, 1997.
Opila,
E., Fox, D., Robinson, C., "Additive Effects on Si3N4 Oxidation/Volatilization
in Combustion Environments," presented at the DOE/ORNL Environmental
Barrier Coatings Workshop, Nashville TN, November 6-7, 2002. (EBC Workshop PDF)
Raj,
R., "Polymer Derived Graded EBCs," presented at the
DOE/ORNL Environmental Barrier Coatings Workshop, Nashville TN,
November 6-7, 2002. (EBC Workshop PDF)
Schenk,
B., "Environmental Barrier Coating Development Challenges," presented at the DOE/ORNL Environmental Barrier Coatings Workshop,
Nashville TN, November 6-7, 2002. (EBC Workshop PDF )
Schenk,
B., Strangman, T., Opila, E., Robinson, C., Fox, D., Klemm, H.,
Taut, C., More, K., Tororelli, "Oxidation Behavior of Prospective
Silicon Nitride Materials for Advanced Microturbine Applications," 2001-GT-0459, Proceedings of ASME Turbo Expo 2001, July 4-7, 2001,
New Orleans, LA. (PDF
4.67MB)
Shanmugham,
S., Hendrik, M., Hunt, A., Oxidation Resistant Coatings Via Combustion
Chemical Vapor Deposition (CCVD) Process," presented at the
DOE/ORNL Environmental Barrier Coatings Workshop, Nashville TN,
November 6-7, 2002. (EBC Workshop PDF)
Stackpole,
M., Bordia, R., "Processing and Properties of Si3N4 Matrix
composites Coatings and Joints from Filled Pre-Ceramic Polymer Systems," presented at the DOE/ORNL Environmental Barrier Coatings Workshop,
Nashville TN, November 6-7, 2002. (EBC Workshop PDF)
Sun,
E., Eaton, H., Holowczak, J., Linsey, G., "UTRC environmental
Barrier Coating development and Demonstration," presented
at the DOE/ORNL Environmental Barrier Coatings Workshop, Nashville
TN, November 6-7, 2002. (EBC Workshop PDF)
Talmy,
I., Zaykoski, J., "Oxidation Resistance of Si3N4 Ceramics
Modified with Boron and Transition Metal Compounds," presented
at the DOE/ORNL Environmental Barrier Coatings Workshop, Nashville
TN, November 6-7, 2002. (EBC Workshop PDF)
Tortorelli, P.F. and K.L. More, “Use of Very High Water Vapor Pressures to Evaluate Candidate Compositions for Environmental Barrier Coatings,” GT2005-69064 in Proc. 2005 ASME Turbo Expo, ASME International, 2005. (PDF 111KB)
Tortorelli,
P. F., More, K. L., "Effects of High Water-Vapor Pressure
on the Oxidation of SiC at High Temperature," accepted for
publication in J. Am. Ceram. Soc., 2003. (PDF
1.79MB)
Tortorelli,
P., More, K., "Understanding the Accelerated Oxidation Behavior
Observed in ORNL’s Keiser Rig," Task 2 Review, March 20, 2000.
(PDF
7.58MB)
Tortorelli,
P. F., More, K. L, "Oxidation of SiC-Based Materials At High
Water-Vapor Pressure," United Technologies Materials Science
& Engineering Seminar, October 17, 2000. (PDF
10.62MB)
Tortorelli, P. F., More, K. L., "Time Dependence of Oxidation-Induced Microstructural Changes in Nicalon- and Nextel-Reinforced SiC," Ceramic Eng. and Sci. Proc. 17 (1996) 366-74.
Tortorelli,
P. F., Wijayawardhana, C.A., Riester, L., Lowden R. A, "Oxidation
Effects on Nextel™-Reinforced SiC," Ceramic Eng. and
Sci. Proc. 15 (4) (1994) 262-71.
Tortorelli,
P. F., Nijhawan, Riester, S., L., Lowden, R. A., "Influence
of Fiber Coatings on the Oxidation of Fiber Reinforced SiC Composites," Ceramic Eng. and Sci. Proc. 14 (7-8) (1993) 358-66.
Characterization
of Ceramics for Structural Applications
Chuck,
L., Graves, G., "Hoop Tensile Strength and Fracture Behavior
of Continuous Fiber Ceramic Composites (CFCC) Tubes from Ambient
to Elevated Temperatures," Journal of Composites Technology
and Research, Vol 19, No. 3 184-192, 1997. (PDF
1.84MB)
Hecht,
N., Goodrich, S., McCullum, D., Yaney, P., Yang, S.D., Tennery, "Characterization Studies of Transformation-Toughened Ceramics," Ceram. Bull, Vol 71, No. 6, pp 955-59, 1992. (PDF
2.9MB)
Hecht,
N., McCullum, D., Graves, G., "Investigation of Selected Silicon
Nitride and Silicon Carbide Ceramics," Ceram, Eng. Proc, 9[9-10]
pp. 1313-1332 (1988). (PDF
5.5MB)
Hecht
N. L., Yaney, P.P., Graves G. A., "The Use of Laser Raman Microprobe
Spectroscopy For Investigating Residual Surface Strain in Selected
Ceramics," pp 367-384, Fractography of Glasses and Ceramics
III, Ceramic Trans (64) 1997, edited by J. R. Varner, V. D. Frechette,
G. D. Quinn., American Ceramic Society. (PDF
2.0MB)
Kent,
R., Hecht, N., "Analysis of Local In-Situ Strain in Ceramics
and Ceramic Matrix Composites," Ceramic Engineering & Science
Proceedings, Vol 14,492-499, 1993, American Ceramic Society (PDF
1.56MB)
Lin, H.T., Interagency CCSC Presentation, April 2006. (980KB PDF)
Lin, H. T., M. K. Ferber, P. F. Becher, J. R. Price, M. van Roode, J. B. Kimmel, and O.D. Jimenez, “Characterization of First Stage Silicon Nitride Components After Exposure to an Industrial Gas Turbine,” J. Am. Ceram. Soc. 89 [1] 258-265 (2006). (PDF 2,536KB)
Lin, H. T., M. K. Ferber, S. B. Waters, and T. P. Kirkland, “Characterization of Mechanical Performance of NT154 Silicon Nitride Microturbine Rotor,” presented at the 30th International Conference & Exposition on Advanced Ceramics and Composites, Cocoa Beach, FL, January 22-27, 2006. (PDF 4,295KB)
Lin, H. T. and M. K. Ferber, “Characterization of Mechanical Reliability of Silicon Nitride Microturbine Rotors,” Key Engineering Materials Vol. 287 (2005), pp. 393-403. (PDF 3,244KB)
Lin, H. T. and M. K. Ferber, “Development of Silicon Nitride Ceramic Components for Advanced Turbine and Microturbine Systems,” Invited paper presented at the IX Conference of the European Ceramic Society, June 19-23, 2005, Protoroz, Slovenia. (PDF 2,348KB)
Lin, H. T., T. P. Kirkland, M. K. Ferber, A. M. Vartabedian, and V. K. Pujari, “Generation of NT154 Si3N4 Mechanical Database for Advanced Microturbine Applications,” presented at the 29th International Conference on Advanced Ceramics and Composites,” January 23-28, 2005, Cocoa Beach, FL. (PDF 2,124KB)
H.-T. Lin, M. K. Ferber, A. A. Wereszczak, and T. P. Kirkland, “Evaluation of Mechanical Performance of Silicon Nitride Ceramics with Environmental Barrier Coating,” Invited paper presented at the 3rd International Symposium on the Science of Engineering Ceramics (EnCera 2004), Oct. 31 – Nov. 3, 2004. Osaka, Japan. (PDF 4,191KB)
Lin, H.T., and M.K. Ferber, "Evaluation Methodology for Mechanical Property of Complex Shaped Ceramic Components," presented at 28th International Conference on Advanced Ceramics and Composites," January 25-30, 2004, Cocoa Beach, FL. (PDF 3,656KB)
H. T. Lin, M. K. Ferber, and T. P. Kirkland, “Evaluation of Mechanical Stability of a Commercial SN88 Silicon Nitride at intermediate Temperatures,” J. Am. Ceram. Soc., 86 [7] 1176-81 (2003). (PDF 1,037KB)
Lin, H. T., Ferber, M. K., Kirkland, T. P., Zemskova, S. M., "Dynamic Fatigue of CVD-Mullite Coated SN 88 Silicon Nitride," GT2003-38919, Proceedings of the 2003 ASME Turbo Expo: Power for Land Sea & Air, June 16-19, Atlanta, GA. (PDF 5.73MB)
Lin, H. T., Ferber, M. K., "Mechanical reliability evaluation of silicon nitride ceramic components after exposure in industrial gas turbines," J. Euro. Cer. Soc. 22 (2002) 2789-2797. (PDF 1.0MB)
Lin, H. T., Ferber, M. K., Westphal, W., Macri F., "Evaluation of Mechanical Reliability of silicon nitride vanes after field tests in an industrial gas turbine," presented at the ASME Turbo Expo 2002, June 3-6, 2002, Amsterdam, The Netherlands. (PDF 3.4MB)
Lin, H. T., Ferber, M. K., Westphal, W., Macri, F., "Evaluation of Mechanical Reliability of silicon nitride vanes after field tests in an industrial gas turbine," ASME GT 2002-30629, Proceedings of ASME Turbo Expo 2002, June 3-6, 2002, Amsterdam, The Netherlands. (PDF 570KB)
Lin, H. T., Ferber, M. K., van Roode, M., "Evaluation of Mechanical Reliability of Si3N4 Nozzles after Exposure in an Industrial Gas Turbine," Proc 7th Int'l Symp. Ceramic Materials and Components for Engines, Goslar Germany, June 19-21, 2000. (PDF 212KB)
Lin, H. T., Ferber, M. K., van Roode, M,. "Evaluation of Mechanical Reliability of Si3N4 Nozzles After Exposure in an Industrial Gas Turbine," presented at the 7th Int'l Symp. Ceramic Materials and Components for Engines, Goslar Germany, June 19-21,2000. (PDF 1.12MB)
Lubis,
A., Hecht, N., Graves, G., "Microstructure-Property Relations
of Hot-Pressed Silicon Carbide-Aluminum Nitride Compositions at
Room and Elevated Temperatures," J. Am. Ceram. Soc., Vol 82,
No. 9, pp 2481-89 (1999). (PDF
2.0MB)
Osborne,
N., Graves, G., Ferber, "Dynamic Fatigue Testing of Candidate
Ceramic Materials for Turbine Engines to Determine Slow-Crack Growth
Parameters," 95-GT-235, ASME. (PDF
1.17MB)
Parthasarathy,
V. M., Price, J. R., Brentnall, W. D., Graves, G., Goodrich, S., "Material Characterization of Candidate Silicon Based Ceramics
for Stationary Gas Turbine Applications," ASME paper 95-GT-249,
presented at the International Gas Turbine and Aeroengine Congress
and Exposition, Houston, TX, U.S.A. June 5-8, 1995. (PDF
2.75MB)
S. Ueno, D. D. Jayaseelan, N. Kondo, T. Ohji, S. Kanzaki and H.-T. Lin, “Development of EBC for Silicon Nitride,” Key Engineering Materials Vol. 287 (2005), pp. 449-455. (PDF187KB)
Development
of Advanced Monolithic Ceramics and Ceramic Composites for Gas Turbine
Applications
Licht, R. H., "Hot Section Silicon Nitride Materials Development for Advanced Microturbine Component Applications," Presented at the 28th Annual Conference on Composites, Materials, and Structures, January 29, 2004, Cocoa Beach, FL. (PDF 1,202KB)
Licht,
R. H., "Hot section Silicon Nitride Materials Development
for Advanced Microturbine Component Applications," Presented
at the 27th Annual Conference on Composites, Materials, and Structures,
January 29, 2003, Cocoa Beach, FL. (PDF
2.26MB)
V.K. Pujari, A.M. Vartabedian, W.T. Collins, J.M. Garrett, “Hot Section Silicon Nitride Materials Development for Advanced Microturbine Applications,” EBC Workshop, Nashville, TN, November, 2004. (PDF 2,641KB)
V.K. Pujari, A.M. Vartabedian, W.T. Collins, J.M. Garrett, “Hot Section Silicon Nitride Materials Development for Advanced Microturbine Applications,” EBC Workshop, Nashville, TN, November, 2003. (PDF 2,641KB)
Pujari, V., “Hot section Materials Development for Advanced Microturbines,” presented at the Environmental Barrier Coatings Workshop, Nashville TN, November 6, 2002. (EBC Workshop PDF )
Schenk,
B., "Silicon Nitride Production Readiness Campaign," presented at the DOE/ORNL Environmental Barrier Coatings Workshop,
Nashville TN, November 6-7, 2002. (EBC Workshop PDF)
Van
Roode, M., "Advances in the Development of Silicon Nitride
and Other Ceramics," presented at the DOE/ORNL Environmental
Barrier Coatings Workshop, Nashville TN, November 6-7, 2002. (EBC Workshop PDF)
Varatbedian, Ara, “Hot Section Silicon Nitride Materials Development For Advanced Microturbines and Other Gas Turbine Component Applications,” Presented at the ASME Turbo Expo: Power for Land, Sea, and Air, June 16-19, 2003, Atlanta, Georgia. (PDF 838KB)
Yeckley R., Hellman, J., Fox, K., “Sialon Materials Development,” presented at the Environmental Barrier Coatings Workshop, Nashville TN, November 18-19, 2003. (PDF 1,061KB)
Yeckley, R., “SiAlON Materials Development at Kennametal,” presented at the Environmental Barrier coatings Workshop, Nashville TN, November 6, 2002. (EBC Workshop PDF)
Non
Destructive Evaluation Methods and Evaluations
Ellingson, W. A., Visher, R. J., Lipanovich, R. S. And Deemer, C. M. “Optical NDT Techniques for Ceramic Thermal Barrier Coatings,” Materials Evaluation, Vol. 64, Number 1, pgs 45-51, 2006. (PDF 1.41MB)
Ellingson, W. A., Deemer, C. M. Sun, J. G. and Koehl, E. R., “NDE Technology for Ceramic Composites,” ASME/IGTI paper GT2006-91349, presented to the ASME Turbo-Expo 2006, Barcelona, Spain. (PDF 2.16MB)
W.A Ellingson, R.J. Visher, S. Hopson, R. Lipanovich, and C. Deemer, "Optical Nondestructive Evaluation Techniques for Environmental Barrier Techniques for Environmental Barrier Coating, " presented to Environmental Barrier Coatings Workshop, November 15-16, 2005, Nashville, TN. (PDF 2.54MB)
Ellingson, W. A., and C. Deemer, “Nondestructive Evaluation of Structural Ceramics,” In Handbook of Advanced Materials, edited by J. K. Wessel, John Wiley and Sons, March 2004.
Ellingson, W. A., Y. Ikeda and J. Goebbels, “Nondestructive Evaluation/Characterization,” In Ceramic Gas Turbine Component Development and Characterization, eds M. van Roode, M. K. Ferber and D. W. Richerson, ASME Press, New York, 2003.
Ellingson,
W. A., Deemer, C., Erdman, S., Parikh, A., "Nondestructive
Characterization of Environmental Barrier Coatings Applied To Monolithic
Ceramics," GT-2002-30645, Proceedings of ASME Turbo Expo 2002,
June 3-6, Amsterdam, The Netherlands. (PDF
2.43MB)
Ellingson,
W. A., Koehl, E. R., Stainbrook, J., Deemer, C., Muliere, D., Parikh,
A., "Reducing Hot-Section Ceramic Component Cost And Supporting
EBC Development Through Development of Nondestructive Evaluation
Technologies," presented that the Microturbine and Industrial
Gas Turbine Peer Review Meeting, Fairfax, VA, March 2002. (PDF
1.61MB)
Ellingson, W. A., Deemer, C., Shields, M., Erdman, S., “Developments of Non Destructive Characterization Technologies for EBCs: Monolithics and CMCs,” presented at the DER/ORNL Environmental Barrier Coatings Workshop, Nashville, TN, November 6-7, 2002. (EBC Workshop PDF)
Ellingson, W. A., J. G. Sun, K. L. More, and R. Hines, “Characterization of Melt-Infiltrated SiC/SiC Composite Combustor Liners Using Meso- and Micro-NDE Techniques,” ASME paper 2000-GT-0068, 45th ASME Gas Turbine and Aeroengine Technical Congress.
Lee,
H., Ellingson W., "Development of Metrological NDE Methods
for Microturbines Ceramic Components," Proceedings of the
45th ASME Gas Turbine and Aeroengine Technical Congress Exposition
and Users Symposium, Munich, Germany, May 9-11, 2000. (PDF
1.08MB)
Sun, J. G., Deemer, C. M.,Ellingson, W. A. And Wheeler, J. “NDT Technologies for Ceramic Matrix Composites:Oxide and Nonoxide,” Materials Evaluation, Vol. 64, No. 1, pgs 52-60, 2006. (PDF 2.68MB)
R. J. Visher, M. D. Shields, W. A. Ellingson, “Initial Investigation Of Optical Coherence Tomography For Nondestructive Evaluation Of Ceramic Coatings”, Presented To: American Ceramic Socitey 28th Annual International Conference on Advanced Ceramics and Composites, January 25-30, 2004, Cocoa Beach, FL. (PDF 817KB)
Designing
Ceramics for Reliability
Duffy, Stephen, “Designing Advanced Ceramic Parts That Last,” ANSYS Solutions, Volume 7, Issue 1, p. 9-12, 2006. (PDF 8.8MB)
Duffy, S., Baker, E., Wereszczak, A., and Swab, J., “Weibull Analysis Effective Volume and Effective Area for a Ceramic C-Ring Test Specimen,” ASTM Journal of Testing and Evaluation Volume 33, Issue 4 (July 2005).
Duffy, S., Baker, E., Kesseli, J., Wereszczak, A., and Johnson, J., "Weibull Strength Parameter Requirements for Si3N4 Turbine Rotor Reliability," presented at the DER/ORNL Environmental Barrier Coatings Workshop, Nashville, TN, November 2003. (EBC Workshop PDF)
Kesseli, J., Sullivan, S., Swaden, Duffy, S., Baker, E., Ferber, M., Jonkowski, J., "Comparative Materials Evaluation for a Gas Turbine Rotor," 27th Annual Conference on Composites, Materials, and Structures, January 27-30, 2003, Cocoa Beach FL. (PDF 2.1MB)
Wereszczak,
A., Caspe, R. J., Swab, Duffy, S.F., Baker, E., "C-Ring Strength
of Advanced Monolithic Ceramics," Ceramic Engineering Sci
& Proceedings Vol TBD, 2004, Proceedings of the 27th Annual
Conference & Exposition on Advanced Ceramics and Composites,
January 26-31, 2003, Cocoa Beach FL. (PDF
445KB)
High-Temperature
Diffusion Barriers for Ni-Base Superalloys
Haynes, J. A., Y. Zhang, K. M. Cooley, L. Walker, K. S. Reeves, and B. A. Pint, “High-temperature diffusion barriers for protective coatings,” Surface and Coatings Technology, v. 188-189, 2004, p. 153-157. (PDF 1,351KB)
Haynes, J. A., Y. Zhang, K. M. Cooley, L. Walker, K. S. Reeves, and B. A. Pint, “High-temperature Diffusion Barriers For Protective Coatings,” Poster presented at the International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, April, 2004. (PDF 1,876KB)
Materials
for Advanced Reciprocating Engines
Armstrong, T. R., West, D. L., Montgomery, Fred C., "ORNL NOx Sensor Program." (PDF 399KB)
N.D. Evans, P.J. Maziasz, and J.J. Truhan, "Phase Transformations During Service Aging of Ni-based Superalloy Pyromet 31V," to be published in Solid-Solid Phase Transformations in Inorganic Materials 2005, TMS, May-June 2005, Warrendale, PA. (PDF 2.14MB)
H. T. Lin, M. P. Brady, R. K. Richards, and D. M. Layton “Characterization of Erosion and Failure Processes of Spark Plugs After Field Service in Natural Gas Engines,” Wear, Vol. 259/7-12 pp. 1063-1067 (2005). (PDF 446KB)
H. T. Lin, M. P. Brady, R. K. Richards, and D. M. Layton “Characterization of Erosion and Failure Processes of Spark Plugs After Field Service in Natural Gas Engines,” April 24-28, 2005, San Diego, CA. (PDF 4.5MB) P. J. Maziasz, J.P. Shingledecker and N.D. Evans, “Alloy Additions for Improved Creep-Rupture Properties of a Cast Austenitic Stainless Steel – CF8C-Plus with Cu, W,” Symposium on Creep Deformation and Fracture, Design, and Life Extension, at MS&T’05, 25-28 September, 2005 Pittsburg, PA. (PDF 3.14MB)
Maziasz, P. J., "Advanced Materials for Exhaust Components," ARES Program Review. (PDF 588KB)
R.K. Richards, T.J. Theiss, H.T. Lin, and M.P. Brady, "Characterization of Erosion Processes of Spark Plugs After Field Service in Natural Gas Engine Spark Plugs," presented at Internal Combustion Engine Division of ASME 2004 Fall Technical Conference, October 24-27, 2004, Long Beach, CA. (PDF 5.5MB)
R. K. Roger, D. M. Layton, H. T. Lin, and M. P. Brady, “Characterization of Erosion Mechanisms for Natural Gas Engine Spark Plugs,” ICEF2004-875 published at Proceedings of Internal Combustion Engine Division of ASME 2004 Fall Technical Conference, October 24-27, 2004, Long Beach, CA. (PDF 2.7MB)
J. P. Shingledecker, P. J. Maziasz, D. Evans, and M. J. Pollard, “Alloy Additions for Improved Creep-Rupture
Properties of a Cast Austenitic Alloy,” in Conf. Proc. Creep Deformation and Fracture, Design, and Life Extension, TMS, Warrendale, PA (2005), pp.129-138. (PDF 612KB)
J.P. Shingledecker, P. J. Maziasz, D. Evans, and M.J. Pollard, “Creep Behavior of a New Cast Austenitic Steel,” ECCC Creep Conference, London, UK, September 12, 2005. (PDF 2.18MB)
J.P. Shingledecker, P.J. Maziasz, N.D. Evans, and M.J. Pollard, "Creep Behavior of a New Cast Austenitic Alloy," to be published in Proceedings of ECCC Conference on Creep and Fracture in High-Temperature Components - Design and Life-Assessment Issues, presented in London, September, 2005. (PDF 1,288KB)
L. R. Walker, H. T. Lin, I. Levina, M. P. Brady,, and J. Lykowski, “SEM and EPMA Analysis of Spark Plug Electrode Erosion," pp. 1614-15 in Proceeding of Microscopy and Microanalysis 2005,“ July 31-August 4, 2005, Honolulu, Hawaii. (PDF 659KB)
L. R. Walker, H. T. Lin, I. Levina, M. P. Brady, and J. Lykowski, “SEM and EPMA Analysis of Spark Plug Electrode Erosion,” presented at Microscopy and Microanalysis 2005,“ July 31-August 4, 2005, Honolulu, Hawaii. (PDF 3.1 MB)
D. L. West, F. C. Montgomery, and T. R. Armstrong. “NO-selective NOx sensing elements for combustion exhausts,” Sensors and Actuators B, 111-2, pp. 84, (2005). (PDF 454KB)
D. L. West, F. C. Montgomery, and T. R. Armstrong. “Use of La0.85Sr0.15CrO3 in high-temperature NOx sensing elements,” Sensors and Actuators B, 106[2], pp. 758-765, (2005). D. L. West, F. C. Montgomery, and T. R. Armstrong, “Total NOx sensing elements with compositionally identical oxide electrodes,” Journal of the Electrochemical Society (in press Dec. 2005).
D. L. West, F. C. Montgomery, and T. R. Armstrong, “DC electrical-biased, all-oxide NOx sensing elements for use at 873 K,” 29th International Cocoa Beach Conference on Advanced Ceramics and Composites, Cocoa Beach, FL, 2005.
D. L. West, F. C. Montgomery, and T. R. Armstrong. “Electrically biased NOx sensing elements with coplanar electrodes,” Journal of the Electrochemical Society, 152 [6], H74–9, 2005. (PDF1,002KB)
D. L. West, F. C. Montgomery, and T. R. Armstrong. “Use of La0.85Sr0.15CrO3 in high-temperature NOx sensing elements,” Sensors and Actuators B, 106[2], pp. 758-765, (2005). (PDF 538KB)
D. L. West, F. C. Montgomery, and T. R. Armstrong, “All-oxide “total NOx” sensing elements,” 207th Meeting of the Electrochemical Society, Quebec City, Canada, 2005. (PDF 501KB)
D. L. West, F. C. Montgomery, and T. R. Armstrong, “High-T NOx sensing elements using conductive oxides and Pt,” Proceedings of ICED: Engines for Mobile, Marine, Rail, Power Generation and Stationary Applications, Long Beach, CA, 2004. (PDF 799KB)
D. L. West, F. C. Montgomery, and T. R. Armstrong, “Electrode materials for mixed-potential NOx sensors,” 28th International Cocoa Beach Conference on Advanced Ceramics and Composites, Cocoa Beach, FL, 2004.
D. L. West, F. C. Montgomery, and T. R. Armstrong, “NO-selective NOx sensing elements for combustion exhausts,” Eurosensors XVIII, Rome, Italy, 2004. (PDF 803KB)
|
