Safety and Health Guide for the Meatpacking Industry
U.S. Department of Labor
Ann McLaughlin, Secretary
Occupational Safety and Health Administration
John A. Pendergrass, Assistant Secretary
1988
OSHA 3108
Material contained in this publication is in the public domain and may be reproduced, fully or partially, without permission of the Federal Government. Source credit is requested but not required.
Contents
Introduction
Potential Hazards
Knife Cuts
Falls
Back Injuries
Toxic Substances
Cumulative Trauma Disorders
Infectious Diseases
Protective Measures
Guardrails
Floors
Wiring
Equipment and Machine Guarding
Local Exhaust Ventilation
General Ventilation
administrative Controls
Work Practices
Protective Clothing and Equipment
Related Issues
Training and Education
First-Aid Training
Emergency Response
Hazard Communication
Access to Medical Records
Recordkeeping
Employer and Employee Responsibilities
Appendix
References
Consultation Project Directory
Related Publications
Occupational Safety and Health Administration's Regional Offices
Introduction
The meatpacking industry (Standard Industrial Classification 2011) , which employs over 1000,000 workers, is considered to be one of the most hazardous industries in the United States. according to the Bureau of Labor Statistics (BLS) 1 this industry has had the highest injury rate of any industry in the country for five consecutive years (1980-1985) with a rate three times that of other manufacturing industries.
BLS studies have also shown that for 1985, 319 workers were injured during the first month of employment in the industry. Of those workers, 29 percent were cut by knives or machinery and 30 percent received sprains and strains. In addition, more than 30 percent of all injuries occurred to workers 25 years of age or younger. Younger new workers are at the highest occupational risk and suffer a significant proportion of all injuries.
Workers can be seriously injured by moving animals prior to stunning, and by stunning guns that may prematurely or inadvertently discharge while they try to still the animal. During the hoisting operation, it is possible for a 2,000-pound carcass to fall on workers and injure them if faulty chains break or slip off the carcass' hind leg. Workers can suffer from crippling arm, hand, and wrist injuries. For example, carpal tunnel syndrome, caused by repetitive motion, can literally wear out the nerves running through one section of the wrist. Workers can be cut by their own knives and by other workers' knives during the butchering process. Back injuries can result from loading and unloading meat from trucks and from moving meat, meat racks, or meat trees along overhead rails. Workers can be severely burned by cleaning solvents and burned by heat sealant machines when they wrap meat. It is not uncommon for workers to sever fingers or hands on machines that are improperly locked-out or inadequately guarded. For example, in 1985, BLS studies also reported 1,748 cases of injuries to the fingers, including 76 amputations. Many workers can also injure themselves by falling on treacherously slippery floors and can be exposed to extremes of heat and cold.
This publication is designed to increase employer and employee awareness of these and other workplace hazards and to highlight the ways in which employer and and employees can work together to eliminate them. Employers are encouraged to review and strengthen overall safety and health precautions to guard against workplace accidents, injuries, and illnesses.
Potential Hazards
Machinery such as head splitters, bone splitters snout pullers and jaw pullers, as well as band saws and cleavers, pose potential hazards to workers during the various stages of processing animal carcasses. A wide variety of other occupational safety and health hazards exists in the industry (see appendix) . These hazards are identified and discussed in the following paragraphs.
Knife Cuts
Knives are the major causes of cuts and abrasions to the hands and the torso. Although modern technology has eliminated a number of hand knife operations, the hand knife remains the most commonly used tool and causes the most frequent and severe accidents. For example, one worker used a knife to pick up a ham prior to boning; the knife slipped out of the ham striking him in the eye and blinding him. Another worker was permanently disfigured when his knife slipped out of a piece of meat and struck his nose, upper lip, and chin.2
Workers have also been cut by other workers as they remove their knives from a slab of meat. These "neighbor cuts" are usually the direct result of over-crowded working conditions.
![hand](images/osha3108_02.jpg)
Falls
Falls also represent one of the greatest sources of serious injuries. Because of the nature of the work, floor surfaces throughout the plants tend to be wet and slippery. Animal fat, when allowed to accumulate on floors to dangerous levels, and blood, leaking pipes, and poor drainage are the major contributors to treacherously slippery floors.
![foot](images/osha3108_03.jpg)
Back Injuries
These injuries tend to be more common among workers in the shipping department. These employees, called "luggers," are required to lug or carry on their shoulders carcasses (weighing up to 300 pounds) to trucks or railcars for shipment.
Toxic Substances
Workers are often exposed to ammonia. ammonia is a gas with a characteristic pungent odor and is used as a refrigerant, and occasionally, as a cleaning compound. Leaks can occur in the refrigeration pipes carrying ammonia to coolers. Contact with anhydrous liquid ammonia or with aqueous solution is intensely irritating to the mucous membranes, eyes, and skin. There may be corrosive burns to the skin or blister formation. Ammonia gas is also irritating to the eyes and to moist skin. Mild to moderate exposure to the gas can produce headaches, salivation, burning of the throat, perspiration, nausea, and vomiting. Irritation from ammonia gas to the eyes and nose may be sufficiently intense to compel workers to leave the area. If escape is not possible, there may be severe irritation of the respiratory tract with the production of cough, pulmonary edema, or respiratory arrest. Bronchitis or pneumonia may follow a severe exposure.
On some occasions, employees have been exposed to unsafe levels of carbon dioxide from the dry ice used in the packaging process. When meat is ready to be frozen for packaging, it is put into vats where dry ice is stored. During this process, carbon dioxide gas may escape from these vats and spread throughout the room. Breathing high levels of this gas causes headaches, dizziness, nausea, vomiting, and even death.
Workers are also exposed to carbon monoxide. Carbon monoxide is a colorless, odorless gas that is undetectable by the unaided senses an is often mixed with other gases. Workers are exposed to this gas when smokehouses are improperly ventilated. Overexposed workers may experience headaches, dizziness, drowsiness, nausea, vomiting, and death. Carbon monoxide also aggravates other conditions, particularly heart disease and respiratory problems.
Workers are also exposed to the thermal degradation products of polyvinyl chloride (PVC) food-wrap film. PVC film used for wrapping meat is cut on a hot wire, wrapped around the package of meat, and sealed by the use of a heated pad. When the PVC film is heated, thermal degradation products irritate workers' eyes, nose, and throat or cause more serious problems such as wheezing, chest pains, coughing, difficulty in breathing, nausea, muscle pains, chills, and fever.
Cumulative Trauma Disorders
Cumulative trauma disorders are widespread among workers in the meatpacking industry. Cumulative trauma disorders such as tendonitis (inflammation of a tendon sheath) , and carpal tunnel syndrome are very serious diseases that often afflict workers whose jobs require repetitive hand movement and exertion.
Carpal tunnel syndrome is the disorder most commonly reported for this industry and is caused by repeated bending of the wrist combined with gripping, squeezing, and twisting motions. A swelling in the wrist joint causes pressure on a nerve in the wrist. Early symptoms of the disease are tingling sensations in the thumbs and in the index and middle fingers. Experience has shown that if workers ignore these symptoms, sometimes misdiagnosed as arthritis, they could experience permanent weakness and numbness in the hand coupled with severe pain in the hands, elbows, and shoulders.
Infectious Diseases
Workers are also susceptible to infectious diseases such as brucellosis, erysipeloid, leptospirosis, dermatophytoses and warts. Brucellosis is caused by a bacterium and is transmitted by the handling of cattle or swine. Persons who suffer from this bacterium experience constant or recurring fever, headaches, weakness, joint pain, night sweats, and loss of appetite.
Erysipeioia and leptospirosis are also caused by bacteria. Erysipeloid is transmitted by infection of skin puncture wounds, scratches and abrasions; it causes redness and irritation around the site of infection and can spread to the blood stream and lymph nodes. Leptospirosis is transmitted through direct contact with infected animals or through water, moist soil, or vegetation contaminated by the urine of infected animals. Muscular aches, eye infections, fever, vomiting, chills, and headaches occur, and kidney and liver damage may develop.
Dermatophytosis, or the other hand, is a fungal disease and is transmitted by contact with the hair and skin of infected persons and animals. Dermatophytosis, also known as ringworm, causes the hair to fall out and small yellowish cuplike crusts to develop on the scalp.
"Verruca vulgaris," a wart caused by a virus, can be spread by infectious workers who have contaminated towels, meat, fish knives, work tables or other objects.
![guardrails](images/osha3108_04.jpg)
Protective Measures
The unique safety and health hazards found in this industry can be minimized or eliminated with the proper use of control methods. A preferred way of controlling potential hazards is through the use of engineering controls. Engineering controls are methods that prevent harmful worker exposure through proper design of equipment and processes. Various controls are briefly described in the following paragraphs.
![safety measure](images/osha3108_05.jpg)
Guardrails
The use of guardrails can protect workers from accidental falls. Open surface dip tanks, used for sterilizing shackling equipment, and elevated work platforms must have guardrails. Railings should also be checked to see that they are securely attached to walls.
Floors
Employers should install a non-skid flooring material or rubberized cushioned floor mats at all work stations for workers to stand on, especially in areas where hand knives and power tools are used.
Wiring
All electrical wiring should be checked periodically for cracking, fraying, or other defects, and all electrical equipment should be grounded.
Equipment and Machine Guarding
Equipment used to hold and move meat and items such as shackles, conveyors, and hooks should be checked frequently and repaired. Equipment that poses a hazardous energy source should, when not in use, be subject to lock-out and tag-out procedures. This assures that workers inspecting or maintaining equipment are not injured by start-up of the equipment. All equipment that poses a hazard should be guarded.
Local Exhaust Ventilation
A preferred control method for removing air contaminants from the workplace is local exhaust ventilation. This control is located at the source of the generation of contaminants, and captures, rather than dilutes, the the hazardous substances before they escape into the workplace environment.
![exhaust fan](images/osha3108_06.jpg)
General Ventilation
General, or dilution, ventilation systems are also recommended because they add or remove air from the workplace to keep the concentration of air contaminants below hazardous levels. General ventilation consists of air flow through open windows or doors, fans, and roof ventilators. General ventilation control only dilutes air contaminants, unlike local exhaust ventilation which removes air contaminants. When using general ventilation systems, care should be taken not to recirculate the air contaminants throughout the workplace.
Administrative Controls
An employer also might decide to use administrative controls to minimize the risk of carpal tunnel syndrome, back and shoulder injuries, and exposure to toxic substances. One type of administrative control would be to reduce employee work periods in which excessive repetitive wrist bending is necessary or when the worker is exposed to hazardous substances.
Work Practices
Safe work practices are essential in helping to maintain a safe and healthful work environment. Workers must therefore be encouraged and be given sufficient time and equipment to keep surface clean and orderly.
To do this, spills must be cleaned up immediately. Water, blood, or grease on floors will cause falls. also,
wet working conditions pose a serious threat of electrocution. Periods during the day should also be set aside for general housekeeping, and constant surveillance should be kept to spot slippery areas. Non-skid floor mats can also be used successfully in potentially dangerous areas. Knives left carelessly in sinks or on counters can cause serious accidents. Knives should be kept sharpened at all times. Dull knives can cause serious safety hazards and worker fatigue. Equipment such as the band saw and the bacon press must be cleaned with the power off and locked-out, and tagged-out. Workers should use only tools and equipment with which they are familiar. Moreover, employers should check refrigeration systems regularly for leaks and should make sure that hazardous substances, such as ammonia, are identified by appropriate hazard warnings (labels, signs, etc.) .
Employers should make handwashing facilities readily available to employees working with or near toxic substances. It is equally important that handwashing facilities be made available for workers who handle meat without the use of protective gloves. Prompt handwashing and the use of disposable hand towels will help prevent the spread of infectious diseases.
Protective Clothing and Equipment
Since slippery floors are a major cause of falls, protective clothing such as safety shoes or boots with toe guards and slip-resistant soles must be worn by workers. To help reduce the spread of infectious diseases, protective gloves should be worn when workers handle meat. Workers who use cleaning compounds must also wear protective gloves to prevent chemical burns. In addition, workers who use knives must be provided with metal mesh gloves and aprons, and wrist and forearm guards to protect them from knife cuts.
Workers performing hoisting and shackling operations should be protected with safety helmets that meet the specifications of american National Standard Requirements for Protective Head Wear for Industrial Workers as well as a barricade or shield assembly. These safeguards can prevent injury from falling or moving animals and/or materials. In addition, removing the worker from the immediate area during hoisting operations is recommended.
The employer must furnish employees with proper personal protective equipment required for his or her specific work operation and exposure. For example, in the event of exposure to toxic chemicals, a worker must be provided with a suitable respirator to prevent inhalation of harmful substances.
In addition, adjustable work stands should be made available to accommodate for worker height to minimize the possibility of back strain.
Machines and equipment found in meatpacking plants produce a high level of noise; in such circumstances, workers must be provided with ear plugs. The employer may be required to provide workers with face shields or goggles when workers mix or handle cleaners. The use of this equipment will prevent chemical burns to the face and eyes. Goggles may also be required during the boning, trimming, and cutting operations to prevent foreign objects from entering the workers' eyes.
![hat and goggles](images/osha3108_07.jpg)
Related Issues
Training and Education
BLS studies show that many workers are injured because they often do not receive the safety training they need, even on jobs involving dangerous equipment where training is clearly essential. These studies also show that younger, and especially new, employees are most at risk because they are not taught the necessary safety measures before they begin work.* More experienced workers, on the other hand, are injured because the task becomes routine, and they are not as cautious as they might be otherwise.
It is essential, therefore, that employers develop, implement, and maintain at the workplace a written comprehensive training program for all employees. A comprehensive, well-organized training program helps the employer to educate workers in safe work practices and techniques, and helps demonstrate the employer's concern for, and commitment to, safe work practices.
The training program should inform workers about safety and health hazards and their prevention, the proper use and maintenance of equipment, any appropriate work practices, a medical surveillance program, and emergency situations.
Once the employer has developed and implemented the safety and health program, he should choose a person who is committed to workplace safety and health to manage the program. This individual should have time to devote to developing and managing the program and must be willing to take on the responsibility and the accountability that goes with operating an effective program.
The employer should also make all employees familiar with their surroundings and work environment. Furthermore, employers should train workers annually in their work tasks or in new job assignments that expose them to new hazards. New employees should be trained at the time of initial assignment, and annually thereafter.
More training is needed when new equipment, materials, or processes are introduced, when procedures are updated or revised, or when employee performance is inadequate.
First-Aid Training
At least one person on each shift should be trained and certified in first aid. First-aid training should include, as a minimum, completion of an approved first-aid training course. Moreover, proper first-aid supplies must be readily available for emergency use. Pre-arranged ambulance services should also be available for any emergency.
![first-aid kit](images/osha3108_08.jpg)
Emergency Response
Proper planning for emergencies is necessary to minimize employee injury. It is important, therefore, that employers in the meat industry develop and implement a written emergency action plan. The plan should include elements such as (1) emergency escape procedures and emergency escape route assignments, (2) procedures for employees to follow who remain to perform (or shut down) critical plant operations prior to evacuation, (3) procedures to account for all employees after emergency evacuation has been completed, (4) assignment of rescue and medical duties to those employees who are to perform them and the preferred means for reporting emergencies, and (5) names and regular job titles of persons or departments to be contacted for further information or explanation of duties under the plan. Emergency phone numbers should also be posted in a conspicuous place near or on telephones.
![emergency stop](images/osha3108_09.jpg)
Hazard Communication
OSHA's Hazard Communication Standard requires the employer to establish a written hazard communication program to transmit information on the chemical hazards to which employees are exposed. The program must include container labeling and other forms of warning and must provide exposed workers with material safety data sheets (MSDS's) The MSDS details the substance's properties and the nature of the hazard. The standard further requires chemical hazard training for exposed workers.
In addition, workers who handle only sealed containers of chemicals are required to keep labels affixed to incoming containers, are to be provided access to MSDS's while the material is in the workplace, and are to be trained on how to protect themselves against hazards.
Access to Exposure and Medical Records
In 1988, OSHA issued a standard that requires employers to provide employees with information to assist in the management of their own safety and health. The standard, "Access to Employee Exposure and Medical Records" (29 CFR 1910.20) , permits direct access by employees or their designated representatives and by OSHA to employer-maintained exposure and medical records. This access is designed to yield both direct and indirect improvements in the detection, treatment, and prevention of occupational disease. Access to these records should result in a decreased incidence of occupational exposure and should aid in designing and implementing new control measures.
Recordkeeping
The Occupational Safety and Health Administration requires employers with 11 or more employees to prepare and maintain pertinent injury and illness records of accidents affecting their employees. Moreover, all employers are required to report to the nearest OSHA office, within 48 hours, all accidents resulting in a work-related death or in five or more hospitalizations. The report may be either oral or written.
The employer is also required to maintain occupational injury and illness records at each workplace. Records must be retained for five calendar years following the end of the year to which they relate and may be inspected and copied at any reasonable time by authorized Federal or State government representatives.
These records are important to the employer in analyzing the effectiveness of safety and health programs. They are also important to OSHA inspectors in deciding whether to conduct a complete workplace inspection and, if so, where to concentrate their attention.
Employer and Employee Responsibilities
An employer's commitment to a safe and healthful environment is essential in the reduction of workplace injury and illness. This commitment can be demonstrated through personal concern for employee safety and health, by the priority placed on safety and health issues, and by setting good examples for workplace safety and health. Employers should also take any necessary corrective action after an inspection or accident. They should assure that appropriate channels of communication exist between to allow information and feedback on safety and health concerns and performance. In addition, regular self inspections of the workplace will further help prevent hazards by assuring that established safe work practices are being followed and that unsafe conditions or procedures are identified and corrected properly. These inspections are in addition to the everyday safety and health checks that are part of the routine duties of supervisors.
Since workers are also accountable for safety and health, it is extremely important that they too have a strong commitment to workplace safety and health. Workers should immediately inform their supervisor or their employer of any hazards that exist in the workplace and of the conditions, equipment and procedures that would be potentially hazardous. Workers should also understand what the safety and health program is all about, why it is important to them, and how it affects their work.
Finally, employers who want help in recognizing and correcting safety and health hazards and in improving their safety and health programs can receive assistance from a free consultation service largely funded by the Occupational Safety and Health administration. The service is delivered by State governments using well-trained professional staff. The service offers advice and help in correcting problems and in maintaining continued effective protection. In addition to employers identify and correct specific hazards, consultants provide guidance in establishing or improving an effective safety and health program and offer training and education for the company, the supervisors, and the employees. Such consultation is a cooperative approach to solving safety and health problems in the workplace. As a voluntary activity, it is neither automatic nor expected, it must be requested. For additional information, contact one of the consultation programs or the nearest OSHA Regional Office listed in this publication.
Appendix
Operational Hazards in the Meatpacking Industry
Operation Performed | Equipment1 Substances | Accidents/ Injuries |
---|---|---|
Stunning | Knocking gun | Severe shock, body punctures |
Skinning/Removing front legs | Pincher device | Amputations, eye injuries, cuts, falls |
Splitting animal | Splitter saws | Eye injury, carpal tunnel syndrome, amputations, cuts, falls |
Removing brain | Head splitter | Cuts, amputations, eye injury, falls |
Transporting products | Screw conveyers, screw auger | Fractures, cuts, amputations, falls |
Cutting/trimming/boning | Hand knives, saws -- circular saw, band saw | Cuts, eye injuries, carpal tunnel syndrome, falls |
Removing jaw bone/snout | Jaw bone, snout puller | Amputations, falls |
Preparing Bacon for slicing | Bacon/belly press | Amputations, falls |
Tenderizing | Electrical meat tenderizers | Severe shock, amputations, cuts, eye injuries |
Cleaning equipment | Lock-out, tag-out | Amputations, cuts |
Hoisting/shackling | Chain/dolly assembly | Falls, falling carcasses |
Wrapping meat | Sealant machine/polyvinyl chloride, meat | Exposure to toxic substances; severe burns to hands/arms, falls |
Lugging meat | Carcasses | Severe back/shoulder injuries, falls |
Refrigeration/curing cleaning, wrapping | Ammonia, carbon dioxide, carbon monoxide, polyvinyl chloride | Upper respiratory irritation and damage |
Source: Compiled by the US. Department Occupational and Health administration, based on information from "The Unique Hazards of Packing," by Jeff Spahn, Area Director, U.S. Department of Labor, Occupational Safety and Health administration, Wichita, Kansas, 1976 (Unpublished information) .
References
Dropf, Donald, and Breidenstein, Burdette C. AMI Center for Continuing Education. Beef Operations in the Meat Industry. Washington, D.C.: American Meat Institute, 1975. 136 Pp.
National Safety Council. Meat Industry Safety Guidelines. Chicago, 1978. 106 Pp.
United Food and Commercial Workers. Safety and Health Department. Meatpacking and Dressing: a Safety Committee Walkaround Guide for the Workplace. Washington, D.C., 1980. 21 Pp.
U.S. Department of Health and Human Services. Public Health Service. Centers for Disease Control, by Alan Pezaro. National Institute for Occupational Safety and Health. Critical Review Analysis for Injury Research in the Meatpacking Industry (SIC 2011) . NTIS PB 85-208726. Washington, D.C.: National Technical Information Service, January 1984. 64 Pp.
U.S. Department of Health and Human Services. Public Health Service. Centers for Disease Control. National Institute for Occupational Safety and Health. Health Hazard Evaluation Report -- Iowa Beef Processors Inc., Dakota City, Ne. Publication No. HETA 81-016-942. Cincinnati; August 1981. 21 Pp.
U.S. Department of Labor, Occupational Safety and Health Administration, by Jeff Spahn, Area Director. "The Unique Hazards of Packing," Wichita, Kansas, 1976. (Unpublished)
U.S. Department of Labor. Bureau of Labor Statistics. "Supplementary Data System," SIC 2011, US DOL, BLS, 1985. Washington, D.C., 1985. (Unpublished information system).
State Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware District of Columbia Florida Georgia Guam. Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Puerto Rico Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Virgin Islands Washington West Virginia Wisconsin Wyoming |
Telephone (205) 348-3033 (907) 264-2599 (602) 255-5795 (501) 682-4522 (415) 557-2870 (303) 491-6151 (203) 566-4550 (302) 571-3908 (202) 576-6339 (904) 488-3044 (404) 894-3806 9-011(671) 646-9246 (808) 548-7510 (208) 385-3283 (312) 917-2339 (317) 232-2688 (515) 281-5352 (913) 296-4386 (502) 564-6895 (504) 925-6005 (207) 289-3331 (301) 333-4218 (617) 727-3567 (517) 353-8250 (H) (517) 322-1814 (S) (612) 297-2393 (S) (612) 623-5100 (H) (601) 987-3981 (314) 751 -3403 (406) 444-6424 (402) 471-4717 (702) 789-0546 (603) 271-3170 (609) 984-3507 (505) 827-2885 (212) 488-7746 (919) 733-2360 (701) 224-2348 (614) 644-263 (405) 235-0530 (503) 378-2890 (800) 382-1241 (Toll-free in State) (412) 357-2561 12396 (809) 754-2134-2171 (401) 277-2438 (803) 734-9599 (605) 688-4101 (615) 741-2793 (512) 458-7287 (801) 530-6868 (802) 828-2765 (804) 786-5875 (809) 772-1315 (206) 586-0961 (304) 348-7890 (608) 266-8579 (H) (414) 521-5063 (S) (307) 777-7786 |
Related Publications
BLS Publication OMB No .1220-0029-Recordkeeping Guidelines for Occupational Injuries and Illnesses
OSHA 2056 All About OSHA
OSHA 2224 Carbon Monoxide
OSHA 3084 Chemical Hazard Communication
OSHA 3047 Consultation Services for the Employer
OSHA 3057 Controlling Electrical Hazards
OSHA 3080 Hand and Power Tools
OSHA 3088 How to Prepare for Workplace Emergencies
OSHA 2236 Materials Handling and Storage
OSHA 3077 Personal Protective Equipment
OSHA 3079 Respiratory Protection
H = Health
S = Safety
U.S. Department of Labor
Occupational Safety and Health administration
Regional Offices
Region I
(CT,* MA, ME, NH, RI, VT*)
JFK Federal Building Room E-340
Boston, MA 02203
Telephone: (617) 565-9860
Region II
(NJ, NY,* PR,* VI*)
201 Varick Street Room 670
New York, NY 10014
Telephone: (212) 337-2378
Region III
(DC, DE, MD,* PA, VA,* WV)
Gateway Building, Suite 2100
3535 Market Street
Philadelphia, PA 19104
Telephone: (215) 596-1201
Region IV
(AL, FL, GA, KY,* MS, NC, SC,* TN*)
Atlanta Federal Center
61 Forsyth St., SW Room 6T50
Atlanta, GA 30303
Telephone: (404) 562-2300
Region V
(IL, IN,* MI,* MN,* OH, WI)
230 South Dearborn Street Room 3244
Chicago, IL 60604
Telephone: (312) 353-2220
Region VI
(AR, LA, NM,* OK, TX)
525 Griffin Street Room 602
Dallas, TX 75202
Telephone: (214) 767-4731
Region VII
(IA*, KS, MO, NE)
City Center Square
1100 Main Street, Suite 800
Kansas City, MO 64105
Telephone: (816) 426-5861
Region VIII
(CO, MT, ND, SD, UT,* WY*)
1999 Broadway Suite 1690
Denver, CO 80202-5716
Telephone: (303) 844-1600
Region IX
(American Samoa, AZ,* CA,* Guam, HI,* NV,* Trust Territories of the Pacific)
71 Stevenson Street Room 420
San Francisco, CA 94105
Telephone: (415) 975-4310
Region X
(AK,* ID, OR,* WA*)
1111 Third Avenue Suite 715
Seattle, WA 98101-3212
Telephone: (206) 553-5930
*These states and territories operate their own OSHA-approved job safety and health programs (The Connecticut and New York plans cover public employees only and OSHA currently is exercising concurrent private-sector Federal enforcement authority in California.)
1 U.S. Department of Labor, Bureau of Labor Statistics, "Supplementary Data System" (Washington, D.C., 1985, unpublished date.
2 National Safety Council, Meat Industry Safety Guidelines (Chicago, 1979), p. 33.
*Note: The Secretary of Labor's Hazardous Occupations Order Number 10 sets a minimum age of 18 years for employment in many meat processing occupations. See CFR, Part 570.61, December 29, 1971.