Publications Portal

You searched on:
Topic Area: Hybrid Materials

Displaying records 1 to 8.
Resort by: Date / Title

1. Materials Challenges in Carbon Mitigation Technologies
Topic: Hybrid Materials
Published: 4/24/2012
Authors: Laura Espinal, Bryan D. Morreale
Abstract: Thermochemical conversion of fossil fuels currently dominates the national and global energy portfolio, with the most notable being the stationary power production and transportation vehicles sectors. As global energy demand continues to increase, p ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909611

2. Highly selective GaN-nanowire/TiO2-nanocluster hybrid sensors for detection of benzene and related environment pollutants
Topic: Hybrid Materials
Published: 6/15/2011
Author: Norman A Sanford
Abstract: Nanowire–nanocluster hybrid chemical sensors were realized by functionalizing gallium nitride (GaN) nanowires (NWs) with titanium dioxide (TiO2) nanoclusters for selectively sensing benzene and other related aromatic compounds. Hybrid sensor device ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909995

3. Silicon-based Molecular Electronics in the Post-Hype Era
Topic: Hybrid Materials
Published: 4/8/2011
Author: Christina Ann Hacker
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=908431

4. Preparation and Characterization of Physical Gels based on Ionic Liquid and Poly(vinyl alcohol)
Topic: Hybrid Materials
Published: 2/28/2011
Authors: Joonsung (Joonsung) Yoon, Hae-Jeong Lee, Christopher M Stafford
Abstract: We report the preparation and characterization of physical gels using mixtures of poly(vinyl alcohol) (PVOH) and a high melting ionic liquid (IL), 1-ethylpyridinium bromide. Similar to PVOH hydrogels, these mixtures show elastic responses in uniaxial ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=907107

5. Impact of Carbon Nanofiber Layer-By-Layer Coatings on Polyurethane Foam Flammability
Series: Technical Note (NIST TN)
Report Number: 1674
Topic: Hybrid Materials
Published: 9/2/2010
Authors: Rick D Davis, Yeon Seok Kim
Abstract: This is the first reported use of Layer-by-Layer (LBL) assembly to fabricate thin film coatings on polyurethane foam, of incorporating carbon nanofibers (CNF) into LBL fabricated coatings, and of using LBL fabricated coatings to reduce the flammabili ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=906320

6. Formation of Silicon-Based Molecular Electronic Structures Using Flip-chip Lamination
Topic: Hybrid Materials
Published: 8/11/2009
Authors: Mariona Coll Bau, Lauren H. Miller, Lee J Richter, Daniel R. Hines, Curt A Richter, Christina Ann Hacker
Abstract: The use of organic molecules to impart electrical surface properties has been a subject of intense research not only from a fundamental perspective but for many technological applications. In particular, organic molecules have been proposed as activ ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=901565

7. Impedance and Nonlinear Dielectric Testing at High AC Voltages Using Waveforms
Topic: Hybrid Materials
Published: 8/15/2005
Authors: Jan Obrzut, K Kano
Abstract: This paper presents the application of a waveform technique that can determine the complex impedance and nonlinear response of dielectric composite films at high ac voltages using a data acquisition (DAQ) card and virtual instrumentation. The voltag ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=903662

8. Solid-Phase ATRP Synthesis of Peptide-Polymer Hybrids
Topic: Hybrid Materials
Published: 3/1/2004
Authors: Ying Mei, Kathryn L Beers, H M Byrd, David Lloyd VanderHart, N. R. Washburn
Abstract: A versatile methodology for preparing hybrid biomaterials by atom transfer radical polymerization from resin-supported peptides has been established. As an example, we have synthesized a GRGDS-functionalized poly(2-hydroxyethyl methacrylate). The pep ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=852269