Equipment Identification
The Department of Energy requires that all capital equipment at Brookhaven National
Laboratory have bar codes or tags to indicate ownership. BNL's Procurement & Property
Management Division conducts periodic inspections to ensure proper identification of all
equipment. If your organization does not have tags (with logos, etc.), the NSLS will supply blank tags.
Identification tags for equipment are available at the NSLS stockroom, free of charge. Please obtain tags for all equipment owned by your organization. Fill in the name of your organization in the space provided and apply one tag to each of piece of equipment that does not already have an identification tag. The serial numbers on tags provided by the NSLS are for your optional use in recordkeeping.
Contact your host for more information.
Stockroom
The NSLS has a stockroom on the experimental floor which contains useful
items for day-to-day needs. It is open 24 hrs/day, 7 days/week. Access after
hours is obtained with your encoded ID card. You can purchase any stocked
item by entering the catalog number and your guest number and account number
into the computer or by using the bar code scanner. Some items, such as film
and disks, are kept in a locked location and require assistance from
Stockroom staff (during working hours) or the Control Room (during
non-working hours). The Stockroom also has a complete set of catalogs
describing all the stock available through BNL Supply and Materiel. Items in
stock at the BNL stores can be ordered by filling out a Stores Requisition
in the NSLS Stockroom. Emergency orders can be processed during regular
working hours by contacting stockroom personnel (x2118). After hours,
contact an Operations Coordinator (x5046) for assistance. The stockroom also
handles all shipping and receiving for the NSLS, including overnight
packages.
Storage of Equipment
Any item placed in storage SHALL follow the NSLS Temporary Storage Area Policy. Very limited short-term storage
(30 days) of experimental equipment, including end-chambers, is available in the X-Ray set-up area, and two-week
storage is available nearby. All items brought to the NSLS must be properly tagged with owner information. Contact
the Building Manager to place any item into any of the storage areas.
NSLS Temporary Storage Area Policy
Gases (Non-Hazardous)
The NSLS keeps a supply of nitrogen, argon, and helium gas cylinders
available outside the northwest roll-up door. These gases may be withdrawn
as follows:
Liquid nitrogen
Liquid nitrogen for transfer into smaller dewars is available outside on the loading dock
located on the western side of the NSLS building. If you are not familiar with transferring
from pressure-building large trailers, see the Building Manager for instructions.
Liquid Helium
Deliveries are made on Mondays, Wednesdays, and Fridays. Helium must be
ordered at least 24 hours in advance of desired delivery date. To order,
have your user account number ready and call the Gas Cylinder Warehouse
between 9:30 am and 11:30 am, Monday through Friday (x2964).
Waste Chemical Storage
Chemical wastes are to be stored near their point of generation in a designated
Satellite Accumulation Area (SAA) until ready for transfer to the NSLS 90-day
Storage Area. The SAA's are located and posted in the setup laboratories; each
has an assigned manager. You must put your waste containers in one of the SAA's
as the wastes are accumulated. The Hazardous Waste trained person for your experiment
must transfer wastes to the NSLS 90-Day Storage area at the end of the experiment.
For further details contact John Aloi (x7018, pager 5212).
Cranes and Material Handling Equipment
The NSLS owns several cranes for small jobs. The VUV ring has two overhead 2-ton cranes, each of which spans one half
of the VUV floor. These are IR controlled. Various beamlines around the X-ray Ring have their own manually operated
overhead hoists or cranes. There is an electrically powered overhead crane by the NSLS Stockroom.
Only BNL trained persons may operate the NSLS Cranes. Each NSLS Crane is assigned a trained and qualified "Responsible Person". The Responsible Person is responsible for reviewing and approving the use of the crane.
Several portable pieces of material handling equipment are also available for use that the NSLS. These include hydraulic platform lifts, engine lifts, counterbalanced floor cranes, and pallet jacks. NSLS Staff members are available to assist with the use of these pieces of equipment.
Contact the Building Manager for use of the cranes or material handling equipment.
User Machine Shop, Use and Training
The NSLS has a machine shop for use by trained and qualified Users to modify, make or repair equipment needed for
experimental equipment. Special training is required to use the User Machine Shop. It is recommended that no one work
alone in the shop after hours. Safety shoes and safety eyeglasses must be worn at all times while in the shop.
Contact the NSLS User Machine shop manager for training and assistance in the machine shop.