Skip to Main Content U.S. Department of Energy
Fundamental Science Directorate
Page 133 of 465

Chemical & Materials Sciences Division
Research Highlights

January 2011

U.S., Taiwan Team Ties Down Vanadium Catalyst in Thin Layers

Soft landing metal-based molecules and acids on a surface creates active, easy-to-separate catalyst

Tethering catalyst
Scientists at Pacific Northwest National Laboratory, Purdue University, and National Dong Hwa University in Taiwan used an ion soft landing technique to gently deposit catalytic and acidic molecules on a tailored, “dry” surface. The dry catalyst drives the reaction in a similar fashion to the liquid-phase version; however, because the catalyst is on a solid surface, it is easy to separate from the remaining reactants and products. Enlarge Image

Results: A vanadium-based catalyst's effectiveness in acidic liquids can be mimicked on a solid, less-toxic surface, thanks to scientists at Pacific Northwest National Laboratory, Purdue University, and National Dong Hwa University in Taiwan. The team used an ion soft landing technique to gently deposit catalytic and acidic molecules on a tailored, "dry" surface. This new material drives the reaction in a similar fashion to the liquid-phase version, and it is better in one significant way: the catalyst is on a solid surface, making it easy to separate from the remaining reactants and products after the reactions. This avoids expensive post-processing steps.

Why it matters: Technologies to turn intermittent power sources into use-any-time sources of energy require fuel cells that use yet-to-be-invented catalysts. In addition, the chemical and petroleum industries crave more efficient catalysts for their reactions. Scientists at PNNL and elsewhere are working to design these efficient, easy-to-separate catalysts. But before the materials can be designed, scientists must understand how catalysts behave at the atomic and molecular levels.

"Our soft-landing study provides a fundamental understanding of the phenomena that occur when catalytic molecules are tethered to the surface," said Dr. Grant Johnson, a physical chemist and a Linus Pauling Distinguished Postdoctoral Fellow at PNNL.

Methods: Something happens when you tether a molecule to a surface. To understand what happens to certain catalyzing molecules, the scientists began with VVO(salen)+. This is an organometallic catalyst, meaning it has a metal center or active site wrapped in organic molecules. Vanadium was selected as the metal center because of its activity and ease of study.

The team generated the catalyst and a nickel-based acid or proton donor, [NiII(salen) + H]+, by electrospray ionization. Then, they used the ion soft-landing apparatus at EMSL to deposit the catalyst and the acid onto a specialized surface. This surface is a thin layer of gold topped with an inert nanometer-thick carbon-fluoride layer.

"Ion soft landing enables us to gently deposit a broad range of molecules on surfaces," said Dr. Julia Laskin, a physical chemist and principal investigator at PNNL. "And the soft landing method is selective, meaning that we know exactly what we deposit."

They studied the catalyst and acid under ultra-high vacuum. They found that over four days, the vanadium catalyst drove a reaction that combines oxygen and hydrogen, creating water. This reaction is critical to fuel cells.

After examining the results, the researchers decided to see if the reaction occurred when acids other than [NiII(salen) + H]+ were used. It did. They tried the reaction without an acid and found that the catalyst was inactive.

The researchers determined that the acid donated a proton to the surface. The proton, in turn, made the catalyst active. "A few years ago, we were watching molecules lose protons when attached to surfaces," said Laskin. "Here, we are seeing that the surface protons induce some very interesting chemistry."

What's Next? The researchers are studying larger metal-centered catalysts and catalytically active nanoparticles using the soft landing approach.

Acknowledgments: This work was supported by grants from the Chemical Sciences, Geosciences, and Biosciences Division in DOE's Office of Basic Energy Sciences; National Science Council; Laboratory Directed Research and Development funds from PNNL; and the DOE Science Undergraduate Laboratory Internship program at PNNL.

The work was performed at DOE's EMSL, a national scientific user facility located at PNNL.

The research was done by Wen-Ping Peng of National Dong Hwa University in Taiwan; Grant E. Johnson, Ivy C. Fortmeyer, Peng Wang, Omar Hadjar, and Julia Laskin of Pacific Northwest National Laboratory; and R. Graham Cooks of Purdue University.

Reference: Peng WP, GE Johnson, IC Fortmeyer, P Wang, O Hadjar, RG Cooks, and J Laskin. 2011.  "Redox Chemistry in Thin Layers of Organometallic Complexes Prepared Using Ion Soft Landing." Physical Chemistry Chemical Physics 13(1), 267-275. DOI: 10.1039/c0cp01457e


Page 133 of 465

Fundamental & Computational Sciences

Research Areas

Divisions

Additional Information

Research Highlights Home

Share

Print this page (?)

YouTube Facebook Flickr TwitThis LinkedIn

Two Classes of Catalysts

Like tiny molecular chefs, catalysts take the ingredients or reactants at hand and create the desired products. Some catalysts are very efficient but difficult to separate from the products; others are slower but easily separated. Scientists want to design catalysts having the best of both worlds.

Homogeneous catalysts, efficient but difficult to separate, work in the same phase as the molecules they are acting on. That is, a liquid catalyst works on liquid reactants. Homogeneous catalysts are prized for their high selectivity towards a desired product. However, they rack up costs, as they must be painstakingly separated from the products and remaining reactants. Also, these catalysts often reside in liquids with undesirable toxicities. These toxic materials increase the risks to workers and increase the costs of waste disposal.

Heterogeneous catalysts are in a different phase than their reactants and products. For example, the catalyst is a solid that acts on liquids or gases. Heterogeneous catalysts are easy to separate from the reactants and products. However, they are often less selective than their homogeneous counterparts. Lower selectivity translates into needing more reactants and producing more unwanted byproducts, thereby incurring more costs.

Contacts