Publications Portal

You searched on:
Topic Area: Manufacturing

Displaying records 1 to 10 of 123 records.
Resort by: Date / Title

1. Technology Readiness Levels for Randomized Bin Picking, Performance Metrics for Intelligent Systems (PerMIS) 2012 Workshop, Special Session
Series: NIST Interagency/Internal Report (NISTIR)
Topic: Manufacturing
Published: 9/4/2012
Authors: Jeremy Alan Marvel, Roger Diack Eastman, Geraldine S Cheok, Kamel Shawki Saidi, Tsai Hong Hong, Elena R Messina, Bob Bollinger, Paul Evans, Joyce Guthrie, Eric Hershberger, Carlos Martinez, Karen McNamara, James Wells
Abstract: The special session on Technology Readiness Levels (TRLs) for Randomized Bin Picking was held during the morning session of the 2012 Performance Metrics for Intelligent Systems (PerMIS) workshop, 21 March, 2012. The stated objective of the special s ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911415

2. Next Generation Packaging, Kitting, and Palletizing: Can one robot do it all?
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7866
Topic: Manufacturing
Published: 6/28/2012
Authors: Rajmohan Madhavan, Stephen Bruce Balakirsky, Craig I Schlenoff
Abstract: A seminar titled "Next Generation Packaging, Kitting, and Palletizing: Can one robot do it all?" was held on February 9th 2012 at the Material Handling Industry of America (MHIA) MODEX show in Atlanta, GA. The seminar primarily focused on whether sys ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911251

3. Technical Guidance for the Specification and Development of Homeland Security Simulation Applications
Series: Technical Note (NIST TN)
Report Number: 1742
Topic: Manufacturing
Published: 5/24/2012
Authors: Charles R. McLean, Sanjay Jain, Yung-Tsun Tina Lee, Charles W. Hutchings
Abstract: This document provides general guidance that is designed to help the U.S. Department of Homeland Security (DHS) Program Managers who may have limited expertise in simulation to better understand this technology. It is also intended to help the relev ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910389

4. Recommended practice for the representation of component catalog data in STEP AP210 (ISO-10303:210)
Series: Grant/Contract Reports (NISTGCR)
Report Number: 12-969
Topic: Manufacturing
Published: 5/1/2012
Author: Kevin G Brady
Abstract: The purpose of this document is to recommend a practice for the representation of electronic component catalog data in STEP AP210 (ISO-10303:210). Catalog data encompasses a wide variety of performance characteristics and specifications, rating limit ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=911292

5. A Bibliography of Ambulance Patient Compartments and Related Issues
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7835
Topic: Manufacturing
Published: 2/27/2012
Authors: Mehdi Dadfarnia, Yung-Tsun Tina Lee, Deogratias Kibira
Abstract: Safety in the patient compartment of ambulances is an issue of growing concern for emergency medical technicians (EMTs), paramedics, patients, and others affected by ambulances. A lot of research has been conducted by different players and much o ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909536

6. Latent Print Examination and Human Factors: Improving the Practice through a Systems Approach
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7842
Topic: Manufacturing
Published: 2/17/2012
Authors: Melissa K Taylor, David H. Kaye, Thomas Busey, Melissa Gische, Gerry LaPorte, Colin Aitken, Susan M Ballou, Leonard Butt, Christophe Champod, David Charlton, Itiel E. Dror, Jules Epstein, Robert J. Garrett, Max Houck, Edward J. Imwinkelried, Ralph Keaton, Glenn Langenburg, Deborah A. Leben, Alice Maceo, Kenneth F. Martin, Jennifer L. Mnookin, Cedric Neumann, Joe Polski, Maria Antonia Roberts, Scott A. Shappell, Lyle Shaver, Sargur N. Srihari, Hal S. Stern, David Stoney, Anjali Swienton, Mary Frances Theofanos, Robert Meryln Thompson, John Vanderkolk, Maria Weir, Kasey Wertheim
Abstract: Fingerprints have provided a valuable method of personal identification in forensic science and criminal investigations for more than 100 years. The examination of fingerprints left at crime scenes, generally referred to as latent prints, consists ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910745

7. Stopping the Flow of Counterfeit Manufactured Goods into the United States
Series: Grant/Contract Reports (NISTGCR)
Topic: Manufacturing
Published: 1/30/2012
Author: Charles McLean
Abstract: This report identifies some of the issues that the U.S. currently faces with respect to counterfeit manufactured goods and suggests possible solutions to this growing problem. Manufacturing industries and products affected by counterfeiting include ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910671

8. Measurement and Evaluation of Visibility Experiments for Powered Industrial Vehicles
Series: NIST Interagency/Internal Report (NISTIR)
Report Number: 7837
Topic: Manufacturing
Published: 12/16/2011
Authors: Roger V Bostelman, Li Peng Liang
Abstract: Powered Industrial Vehicles, such as forklifts, are widely used in manufacturing and other industries. The National Institute of Standards and Technology's Intelligent System Division has been researching advanced 2D and 3D imaging sensors and their ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=909306

9. Representation of functional networks in STEP AP210 with application to SPICE circuit simulation
Series: Grant/Contract Reports (NISTGCR)
Report Number: 11-949
Topic: Manufacturing
Published: 11/11/2011
Author: Jamie Stori
Abstract: STEP AP210 (ISO 10303-210) supports a comprehensive functional network model representation. SPICE (Simulation Program with Integrated Circuit Emphasis) is a general purpose, industry standard, analog electronic circuit simulation. Originally dev ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910094

10. Representation of STEP AP210 package models to support thermal analysis
Series: Grant/Contract Reports (NISTGCR)
Report Number: 11-948
Topic: Manufacturing
Published: 11/2/2011
Authors: Jamie Stori, Spencer Burton
Abstract: STEP AP210 (ISO 10303-210) enables a unified representation of electronic component models capable of supporting a variety of engineering design and analysis disciplines. AP210 package models may contain detailed three-dimensional geometric represe ...
http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910076