Biomedical Engineering  (BME)

CONTACTS

PROGRAM GUIDELINES

Apply to PD 13-5345 as follows:

For full proposals submitted via FastLane: standard Grant Proposal Guidelines apply.
For full proposals submitted via Grants.gov: NSF Grants.gov Application Guide; A Guide for the Preparation and Submission of NSF Applications via Grants.gov Guidelines apply (Note: The NSF Grants.gov Application Guide is available on the Grants.gov website and on the NSF website at: http://www.nsf.gov/publications/pub_summ.jsp?ods_key=grantsgovguide)

Important Notice to Proposers

A revised version of the NSF Proposal & Award Policies & Procedures Guide (PAPPG), NSF 13-1, was issued on October 4, 2012 and is effective for proposals submitted, or due, on or after January 14, 2013. Please be advised that, depending on the specified due date, the guidelines contained in NSF 13-1 may apply to proposals submitted in response to this funding opportunity.

Please be aware that significant changes have been made to the PAPPG to implement revised merit review criteria based on the National Science Board (NSB) report, National Science Foundation's Merit Review Criteria: Review and Revisions. While the two merit review criteria remain unchanged (Intellectual Merit and Broader Impacts), guidance has been provided to clarify and improve the function of the criteria. Changes will affect the project summary and project description sections of proposals. Annual and final reports also will be affected.

A by-chapter summary of this and other significant changes is provided at the beginning of both the Grant Proposal Guide and the Award & Administration Guide.

DUE DATES

Full Proposal Window:  August 15, 2013 - September 17, 2013

SYNOPSIS

The mission of the Biomedical Engineering (BME) program is to provide opportunities to develop novel ideas into discovery-level and transformative projects that integrate engineering and life science principles in solving biomedical problems that serve humanity in the long-term.  The Biomedical Engineering (BME) program supports fundamental research in the following BME themes:

• Neural engineering (brain science, computational neuroscience, brain-computer interface, neurotech, cognitive engineering) - Semahat Demir

• Cellular biomechanics (motion, deformation, and forces in biological systems; how mechanical forces alter cell growth, differentiation, movement, signal transduction, transport, cell adhesion, cell cytoskeleton dynamics, cell-cell and cell-ECM interactions; genetically engineered stem cell differentiation with long-term impact in tissue repair and regenerative medicine) - Kaiming Ye

The BME projects must be at the interface of engineering and life sciences, and advance both engineering and life sciences.  The projects should focus on high impact transforming methods and technologies. The project should include methods, models and tools of understanding and controlling of living systems; fundamental improvements in deriving information from cells, tissues, organs, and organ systems; new approaches to the design of structures and materials for eventual medical use in the long-term; and new novel methods of reducing health care costs through new technologies.

The projects should emphasize the advancement of fundamental engineering knowledge, possibly leading to the development of new methods and technologies in the long-term; and highlight multi-disciplinary nature, integrating engineering and the sciences. The long-term impact of the projects can be related to disease diagnosis and/or treatment, improved health care delivery, or product development. The BME program does not support clinical studies.

As stated earlier, the current program themes are Neural Engineering and Cellular Biomechanics.

BME Program requirement: On the last line of the project summary page for unsolicited and CAREER proposals, the PI should write the BME theme(s) given above that he/she is submitting the proposal for.  [Please check the list above to determine the BME theme(s) for your proposal.] 

The duration of unsolicited awards is generally one to three years.  The typical annual award size for the program is $100,000 for individual investigators or $200,000 for multiple investigators per year (including indirect cost).  Proposals requesting a substantially higher amount than this, without prior consultation with the Program Director, may be returned without review.  Small equipment proposals of less than $100,000 will also be considered and may be submitted during the annual submission window. 

Innovative proposals outside of these specific interest areas can be considered.  However, prior to submission, it is recommended that the PI contact the Program Director to avoid the possibility of the proposal being returned without review.

Additional Program Information - 5345:  (e.g., Areas of Research, Research Highlights, Conferences and Workshops, Program Director Information, etc.)

---------------------------------------------------------------------------------------------------

INFORMATION COMMON TO MOST CBET PROGRAMS

Proposals should address the novelty and/or potentially transformative nature http://www.nsf.gov/about/transformative_research/faq.jsp of the concept being proposed, compared to previous work in the field.  Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and /or industry of success in the research.  The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal.

Proposals submitted to this program are subject to the scope of the program's description and the availability of funds.  Decisions about particular proposals are often very difficult to make and factors other than reviewer comments and ratings enter into the decision.  Maintaining appropriate balance among subfields, the availability of other funding, the total amount of funds available to the program, and general Foundation policies and priorities are also important decision factors. 

Faculty Early Career Development (CAREER) program proposals are strongly encouraged.  Award duration is five years.  The submission deadline for Engineering CAREER proposals is in July every year. Please see the following URL for more information:  http://www.nsf.gov/funding/pgm_summ.jsp?pims_id=503214

Proposals for Conferences, Workshops, and Supplements:  Proposals involving these activities should ideally be submitted during the regular annual proposal submission window.  

Grants for Rapid Response Research (RAPID) and EArly-concept Grants for Exploratory Research (EAGER) are also considered when appropriate.  Please note that proposals of these types must be discussed with the Program Director before submission.  Further details are available in the Proposal and Award Policies and Procedures Guide (PAPPG) download.

.

THIS PROGRAM IS PART OF

Biomedical Engineering and Engineering Healthcare

What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)

Map of Recent Awards Made Through This Program

News

Discoveries