|
Rules & Specifications
On the day of the contest, every contestant must give a completed
Student Design Portfolio to the track start judge. Your portfolio
will be returned to your teacher after the contest.
![Top-of-Page](https://webarchive.library.unt.edu/web/20081005142239im_/http://www.bnl.gov/education/images/top_v1.gif)
The MAGLEV Challenge
The contest allows you to investigate either of two key
features of MAGLEV:
- Speed - The ability of a MAGLEV vehicle to reach high speeds is one of its most
important features. In categories 1, 2, and 3, you
must build the
fastest model MAGLEV vehicles possible. The vehicles speed is timed
on a standard track.
- Cost - The ability of a MAGLEV train to be cost-effective is another key feature.
To be cost-effective you want to carry as many people as possible as
cheaply as possible. However, adding passengers may slow the vehicle
or require a costlier magnetic suspension, etc.
To deal with these design
tradeoffs, an engineering Figure Of Merit (FOM) may be used
to determine the best design. The higher the FOM is, the better the
design in terms of cost-effectiveness. In the category 4, you must
build a model MAGLEV vehicle which has the most cost-effective combination
of speed, passenger capacity, and cost as signified by the highest FOM.
For cost effectiveness, the higher the FOM, the better the design.
![](images/fomcost.gif)
To calculate the FOM, the following variables will be used:
- Passengers: are represented by number of pennies (P) carried by the
vehicle.
- Cost: is represented by number of magnets (N) used to levitate the
vehicle.
- Speed: is measured as distance (D) divided by time (T). D is the distance
between two points on the standard test track (in feet). T is the measured
time (in seconds) the vehicle takes to travel between the two points.
The number of pennies carried (P) and the number of magnets used (N)
are up to the designer. All vehicles will be timed over test tracks
with D=12 feet. In the fourth category.
Individual FOMs are then calculated from the number of pennies, magnets,
and the elapsed time for each vehicle.
![Top-of-Page](https://webarchive.library.unt.edu/web/20081005142239im_/http://www.bnl.gov/education/images/top_v1.gif)
Contest Categories
There are five categories for the contest. You may build only one vehicle
for each category, but you may enter all the categories. Vehicles in categories 1, 2, and 3 use different types of propulsion
systems. Vehicles in categories 4 and 5 use gravity as the propulsion
system.
- Wind Power (SPEED)
Construct a vehicle that travels the length of the track powered by
wind. The wind will be provided by a "Whole House Circulator"
12,500 CFM three-speed fan, placed 12 inches behind the start of the
track. The vehicle should travel the length of the track in the shortest
possible time.
- Self-Propelled (SPEED)
Construct a vehicle that travels the length of the track under its own
power. No external energy source is permitted. Power sources can include,
but are not limited to: propellers, rubber bands, motors, springs, batteries,
etc... The vehicle should travel the length of the track in the shortest
possible time.
- Self-Propelled (BALLOON)
Construct a balloon-propelled vehicle that travels the length of the track. No
other external energy source is permitted. The vehicle should travel the length of the track in the shortest
possible time.
- Electrified Track (SPEED)
Construct a vehicle that uses an electrified track for power. The side
rails of the track will be energized with a 2 amp 12 volt direct current
(DC) power supply. As seen looking down the track from the starting
point, the right-hand rail will have positive (+) polarity. The vehicle
should travel the length of the track in the shortest possible time.
- Gravity (OVERALL FIGURE OF MERIT)
Construct a vehicle that travels the length of the track under the force
of gravity. The track slopes downward with a vertical drop of 2 feet
over its 16 foot length. The vehicle's travel time down the track, number
of pennies carried, and number of magnets should give the highest figure
of merit (FOM), calculated by the formula posted on the design brief.
- Appearance
Construct a model which clearly shows a design concept for a MAGLEV
vehicle. It does not have to be self-propelled or carry pennies, and
there are no length or height restrictions. It must levitate and travel
down a standard track which slopes downward with a vertical drop of
2 feet over its 16 foot length. Vehicles may be entered either as (a)
Scale Model , or (b) Futuristic, as follows:
(a) Scale Model: Design brief should discuss how the model relates proportionately
to a full-scale MAGLEV design, and explain the design concept, that
is, why the vehicle looks the way it does.
(b) Futuristic:
Design brief should explain the design concept, that is, why the vehicle
looks as it does. The design need not be obviously related to a useful
commercial mass transit vehicle. If not, however, then it should clearly
illustrate some special feature(s) of MAGLEV systems.
![Top-of-Page](https://webarchive.library.unt.edu/web/20081005142239im_/http://www.bnl.gov/education/images/top_v1.gif)
Track & Vehicle Specifications
Test Track (See Figure 1)
All tracks used in the competition are 16 feet in length, having two
parallel lines of 1 inch long by 3/4 inch wide ceramic magnets (Kelvin
640092, Radio Shack 64-1875 or equivalent). The two lines are spaced
1 inch apart, forming a magnetic track 2 1/2 inches wide. Sides are
1 inch aluminum angles, spaced 2 9/16 inches apart and centered on the
magnetic track. As seen looking down the track from the starting point,
all magnets on the left will have their north-seeking poles facing up.
Those on the right will have the reverse polarity. NOTE: the north-seeking
pole is the one that points to the Earth's north magnetic pole when
the magnet is suspended by a thread.
Figure 1
Vehicles
Vehicle suspension must be 100% magnetic levitation. Vehicles must be
16 inches or less in length. There is no height restriction. Magnets
on the vehicles should be two parallel lines of 1 inch long by 3/4 inch
wide ceramic magnets. Magnetic polarity and vehicle width must be compatible
with track specifications. Vehicles in the category 4 must carry pennies
in such a way that they can be seen individually or easily removed for
counting.
Restrictions
- Vehicles may not use any of the following:
- Sling Shot Propulsion
- CO2 Cartridges
- Compressed Air*
- Rocket Engines
- Flammable Fuel
- Model Airplane Engines
- Explosive or Pyrotechnic Devices
- Open Flame or other forms of combustion
Note: Use of a balloon shall not be construed as compressed air
- The vehicle must operate without being pushed, touched, or otherwise
interfered with once in place at the starting position of the track.
- Any materials hazardous to human health may not be used.
- Any design determined by the judges or contest coordinators to be
hazardous or unsafe may not be used.
- Number of entries is limited to 15 technology students per competing
junior high/middle school.
If
you have questions about MAGLEV contact:
Bernadette Uzzi
Brookhaven National Laboratory
Building 400C, PO Box 5000
Upton, New York 11973-5000
(631) 344-2756 phone
(631) 344-5832 fax
![Top of Page](images/uparrow_gray.jpg)
Last Modified: January 31, 2008
|