Bulletin: Using Design for the Environment Concepts in Your EMS
Bulletin Highlights
Also in this Bulletin Ray Lelievre and Tony Mello of Acushnet Rubber Company discuss their facility's EMS. |
An Environmental Management System (EMS) can provide a company with a systematic way to improve its operations for better environmental performance. While an EMS supplies the basic management framework, EPA's Design for the Environment (DfE) Program provides guidance and tools to help companies achieve continuous environmental improvement. The DfE approach encourages companies to consider environmental and human health risks in all business decisions. In addition, it encourages companies to evaluate cleaner processes, technologies, and workplace practices.
Why Establish a DfE-Based EMS? A DfE-based EMS provides a company with opportunities to go "beyond compliance" and save money. The DfE approach can help a company meet the objectives of its EMS by promoting the evaluation of cleaner production alternatives. By implementing these alternatives, a company can continuously improve its environmental performance. In addition, an EMS encourages the systematic evaluation of each area of the company's operation. An EMS can provide the following benefits:
|
Facility Profile
New Bedford, Three facilities in New Bedford, MA employ 1,100 people combined; one facility in Thailand employs 425 people. Designs and manufactures elastomeric products including liquid cast polyurethane product lines. Customers include Ford, Chrysler, General Motors, Lexmark, and Xerox. |
Establishing an EMS at Acushnet Rubber Company [Back to top] [DfE-EMS Case Studies] [DfE-EMS Home] Acushnet Rubber Company, Inc.in New Bedford, Massachusetts, established an EMS based on DfE principles. This bulletin presents some examples of how Acushnet reduced production costs and improved worker safety through its EMS.
How the EMS Created Improvements at Acushnet Since implementing a DfE-based EMS, Acushnet has realized many benefits. The company has slashed its use of toxic chemicals, raised production, added employees, and realized annual cost savings. In addition, Acushnet has gained a competitive advantage in the marketplace by becoming one of the first companies in the industry to establish an EMS. In fact, Acushnet is ISO 14001-certified (see the section, "What is an EMS?"). According to Jack Bailey, Environment, Health, and Safety Director, the EMS enables the company to weed out inefficiencies and cut costs to a degree not previously attainable. "We're in business to make money," states Mr. Bailey. "Our EMS makes good business sense for Acushnet." Acushnet emphasized two main DfE concepts when establishing its EMS:
|
For More Information
If you would like more information about Acushnet Rubber Company, Inc., and the company's experience with establishing an environmental management system, contact: Jack Bailey |
Reducing Risk to Workers and the Environment Through a DfE-Based EMS [Back to top] [DfE-EMS Case Studies] [DfE-EMS Home] One of the main DfE concepts is reducing the risk to workers and the environment. Acushnet considers this risk when identifying the significant environmental aspects of the company (see the section, "What is an EMS?"). To determine the significance of an environmental aspect, Acushnet uses the following criteria:
Two criteria, impact on human health and toxicity rating, represent the environmental aspect's risk to humans and the environment. To measure the human health risk and toxicity associated with an environmental aspect, Acushnet uses various resources, such as the list of carcinogens or potential carcinogens from the International Agency for Research on Cancer (IARC),the Hazardous Materials Identification System (HMIS)ratings found on a Material Safety Data Sheet (MSDS), and the list of Toxics Release Inventory (TRI) chemicals regulated under Section 313 of the Superfund Amendment and Reauthorization Act (SARA) Title III. |
Tony Mello at Acushnet works with the aqueous cleaner that replaced TCE. |
For example, Acushnet rated trichloroethylene (TCE) emissions as a significant environmental aspect for three main reasons: hazardous waste disposal costs, TCE's impact on human health, and TCE's toxicity rating (IARC listed it as a potential carcinogen). Since TCE emissions were identified as a significant aspect, Acushnet set an objective to minimize TCE use and set a specific target of completely eliminating TCE by the end of the fiscal year (see the section, "What is an EMS?"). |
For example, Acushnet rated trichloroethylene (TCE)
emissions as a significant environmental aspect for three main reasons:
hazardous waste disposal costs, TCE's impact on human health, and
TCE's toxicity rating (IARC listed it as a potential carcinogen).
Since TCE emissions were identified as a significant aspect, Acushnet
set an objective to minimize TCE use and set a specific target of
completely eliminating TCE by the end of the fiscal year (see the
section, "What is an EMS?").
The first step toward reaching the target was to identify where the TCE was used. Acushnet's suppliers stamped metal parts using a grease coating to facilitate the stamping process. Acushnet used TCE in a vapor degreaser to clean these metal parts. The company convinced their suppliers to replace the grease coating with a water-based lubricant, thereby eliminating TCE use from the cleaning of about 80 percent of its parts. For the remaining 20 percent (parts that were cylindrical and required heavier oils in their production), Acushnet incorporated a two-step aqueous cleaner to replace TCE. As a result of these efforts, the degreasers have been shut down. Due to the elimination of TCE in the facility, Acushnet saves approximately $100,000 annually. More importantly, the company has reduced risk by eliminating the use of a suspected carcinogen in the workplace.
|
|
About the Design for
the Environment Program
The goal of the Design for the Environment Program is to provide industry with information that can help companies design an operation that is more environmentally sound, safer for workers, and more cost-effective. To obtain additional copies of this or other bulletins and case studies, or for more information about EPA's Design for the Environment Program, contact: EPA's Pollution Prevention Information Clearinghouse (PPIC) |
Implementing Cleaner Alternatives Through a DfE-Based EMS [Back to top] [DfE-EMS Case Studies] [DfE-EMS Home] Another way to improve environmental performance and reduce risk is to replace traditional processes, technologies, and practices with "cleaner" alternatives. DfE encourages companies to consider the trade-offs among performance, cost, and environmental and human health risks when evaluating these alternatives. Evaluating alternatives is an important part of the action plan in a company's DfE-based EMS (see the section, "What is an EMS?"). For example, Acushnet identified waste adhesive as a significant environmental aspect due to the health risks posed by the adhesive's VOC content. Three workers in the adhesive application area led by Tony Mello noticed that spraying metal parts with adhesive was not an efficient operation, and that the excess spray posed a health risk to themselves and to others. Encouraged by the DfE EMS to find alternative processes, the workers suggested replacing the spraying process with a cleaner, more efficient process that dips the metal parts in a vat of adhesives and then spins them in a centrifuge. Management, along with the shop floor workers, evaluated this alternative and discovered that the new process:
The money saved from their suggestion will pay for the new system in less than six months. The company now saves $40,000 per year in labor and material costs. Through the DfE-based EMS, all employees at Acushnet are encouraged to continuously seek these types of alternatives that can reduce risk while improving efficiency. |
A New Way of Thinking [Back to top] [DfE-EMS Case Studies] [DfE-EMS Home] Establishing an EMS requires a change in the way management and employees think about the environment. An EMS takes all of the elements of a business and views them as one system. Equipped with this new way of thinking, Acushnet's workforce is constantly looking for new solutions that will improve the company's operations. "We think this is a sound strategy," explains Mr. Bailey. "If it worked for us, there's a good chance it will work for other companies."
Additional Resources In addition to this case study, the DfE Program is working to develop tools to help facilities establish an EMS based on DfE concepts. Mention of trade names, companies, or commercial products does not constitute endorsement or recommendation for use by either the U.S. Environmental Protection Agency or other firms, organizations, or individuals who have participated in the preparation of this information source. |
|