Previous Years > 1978
December
- [12/13/1978] Hoisting of workmen by load lines of cranes.[1926.550]
- [12/13/1978] Initial monitoring and labelling for inorganic arsenic is not required when exposure could not be above the action level.[1910.1018; 1910.1018(b)]
- [12/05/1978] The inorganic arsenic standard applies to the manufacture of antimony oxide by the fuming process.[1910.1018]
- [12/04/1978] Information on fixed ladders and cages.[1910.27]
- [11/27/1978] Exit Routes.[1910.36; 1910.36(g)(2); 1910.37; 1910.37(a)(3)]
- [11/17/1978] Clarification of 29 CFR 1910.24(b).[1910.24]
- [11/16/1978] The blade guard on the Biro All Purpose Cutter.[1910.212]
- [10/30/1978] Transportation of explosives over public or private roads.[1926.904]
- [10/23/1978] Defective Doors on Railroad Boxcars Hazard Alert.
- [10/17/1978] Grounding and barricading requirements for lifting equipment used near energized lines.[1926.955(a)(6)(ii); 1926.952(c)]
- [10/06/1978] Applicability of the inorganic arsenic standard to operations involving chromated copper arsenate (CCA) wood preservative.[1910.1018]
- [10/02/1978] The use of fiberglass tanks for storage of crude oil.[1910.106]
- [09/25/1978] Brazed joints in an oxygen piping installation.[1910.104]
- [09/21/1978] Working between grounds when working on bare conductors.[1926.954; 1926.955]
- [09/11/1978] Temporary bracing of brick walls during construction.[1926.700(a)]
- [09/08/1978] OSHA concurrence on the use of 3/4" square bars for rungs on fixed ladders.[1910.27; 1910.27(a)(1); 1910.27(b)(1)(i)]
- [08/31/1978] Physical qualification requirements for crane operators.[1926.550]
- [08/17/1978] The British Standard material valves compliance with Occupational Safety and Health Administration standards.[1910.106]
- [08/09/1978] Twist lock receptacles and attachment plugs.[1926]
- [08/04/1978] Interpretation of the term "bulk plant" as it is used in 1910.106.[1910.106]
- [07/19/1978] Clarification of standard 29 CFR 1910.106(b)(4)(iv)(e).[1910.106]
- [07/13/1978] Duplex Rewinder Bar Guards.[1910.261]
- [06/23/1978] The investigation of worker job safety complaints performed by OSHA.[1903.11(a)]
- [06/13/1978] Platen Presses.[1910.217]
- [06/12/1978] Retention period for inspection and maintenance records for mechanical power presses.[1910.217(e)(1)(i); 1910.217(e)(1)(ii)]
- [06/09/1978] Spray Finishing Using Water-Base Paints.[1910.107]
- [06/05/1978] Rollover protective structure application.[1926.1000; 1926.1001]
- [05/18/1978] Only alloy steel chain is recommended by chain manufacturers for overhead hoisting.[1910.184]
- [05/17/1978] Fixed Ladder Used For Emergency Egress Only.[1910.27]
- [05/08/1978] Regulations applicable to cantilever type personnel hoists.[1926.552]
- [05/04/1978] Medical surveillance requirements of the coke oven emissions standard.[1910.1029]
- [05/03/1978] Cages installed on fixed ladders.[1910.27]
- [04/19/1978] The modification of a refrigerator of freezer chest to store flammable liquids.[1910.106]
- [04/14/1978] The use of compressed air for cleaning purposes with a pressure greater than 30 P.S.I. and the use of air guns with long pipes.[1910.242]
- [04/14/1978] Personnel hoists.[1926.552]
- [04/05/1978] Clarification of 1910.23(c)(1).[1910.23]
- [04/03/1978] The requirement for fire resistant fluids does not apply to hydraulic tools.[1926.302; 1926.950]
- [03/22/1978] Requirements for toeboards.[1926.451; 1926.500]
- [03/17/1978] Enforcement of 29 CFR 1926.601(b)(10).[1926.601(b)(10)]
- [03/17/1978] Transparent Welding Curtains and the Requirements.[1910.252]
- [02/23/1978] Compression spring requirements for mechanical power presses.;Compression spring requirements for mechanical power presses.[1910.217(b)(3)(ii); 1910.217(b)(4)(iii)]
- [02/22/1978] Standards for mechanical power presses.[1910.212]
- [02/17/1978] Safety aspects of personnel and material hoists.[1926.552; 1926.800]
- [02/14/1978] Review of the safeguards provided on the Biro Meat Tenderizer and the Chopper (grinder) machines.[1910.212]
- [02/06/1978] If work may accidently come into contact with an energized line, do not use a conductive hose.[1926.302; 1926.951; 1926.950]