|
Production Projects |
| 005 |
Attenuating Surface
Waves in a Localized Region of the Open Ocean |
009 |
Ultrasonic Flowmeter Evaluation |
010 |
Subsea Inspection |
011 |
Portable Data Recorder for USGS
inspectors |
014 |
Fluidic Sensor for Hydrocarbon
& Hydrogen Sulfide Gas |
017 |
Fire Suppression Technology |
026 |
Detection and Suppression of
Wellhead Fires |
027 |
Technology Assessment for
Cementing Shallow Casings |
028 |
Casing Wall Thickness Technology |
036 |
Strumming of Risers |
052 |
Dynamics and Reliability of
Compliant Drilling and Production Platforms |
062 |
Southern Bering Sea Production
System Study |
074 |
Drag and Oscillation of Marine
Risers and Slack Cables |
091 |
Underwater Subsea Production
System Inspection |
092 |
A Theoretical Investigation on
the Behavior of Complaint Risers |
100 |
Feasibility of Production,
Loading and Storage Systems for the North Aleutian Basin |
105 |
Chukchi Sea Transportation Cost
Comparison Study |
108 |
An Investigation of the
Non-Linear Behavior of Compliant Risers |
129 |
Methodology for Comparison of
Alternative Production Systems |
130 |
Interference/Clearance Problem of
Risers in Floating Production Systems |
145 |
Response Prediction Techniques
for Risers in Sheared Currents |
164 |
Chukchi Sea Transportation Update
Study |
173 |
Methodology for Formal Safety
Assessment of the Topsides of Offshore Production Facilities |
186 |
Hydrodynamic Damping and Combined
Motion Loading (HYDAMP II) |
203 |
Performance of Safety and
Pollution Control Devices in the Aftermath of Hurricane Andrew (Part of the Hurricane
Andrew OCS Damage Assessment Program) |
212 |
Deep Water Subsea Conceptual
Studies, Phase 1. |
216 |
SPAR Development Model Test
Program |
226 |
Hydrates of
Hydrocarbons--Practical Implications |
239 |
Paraffin Deposition Prediction in
Multiphase Flowlines and Wellbores |
249 |
Control of Natural Gas Hydrates |
266 |
Support of the Offshore
Technology Research Center |
272 |
Allowable Leakage Rates for
Safety and Pollution Prevention Equipment |
275 |
Riser Reliability Analysis |
276 |
Mitigating the Problem of Gas
Migration After Primary Cementing |
278 |
Natural Gas Sampling Program |
280 |
Risk Assessment for Dry Tree
Tieback Alternatives Study |
284 |
Investigation of Hybrid Deep
Water Production Systems |
285 |
Assessment and Reliability of
Production and Tubing Design |
300 |
Coiled-Tubing and Slim-Hole
Technology, DEA-67 Phase III |
301 |
Revision of Orifice Metering
Standard |
302 |
University of Tulsa Fluid Flow
Projects (TUFFPs) |
303 |
Coriolis Massmeter Data Analysis
Program |
305 |
Highly Compliant Rigid-Pipe Riser
Analysis |
306 |
Low Viscosity Fluids for Plugging
Microfine Fractures |
307 |
Optimization of Horizontal Well
Completion |
327 |
Applied Gas Hydrate Research
Program |
328 |
OTRC Cooperative Agreement |
331 |
Lifetime Cost of Subsea
Production Systems |
339 |
Modernization of Tubular Collapse
Performance Properties |
356 |
Survey of SCADA System Technology
and Reliability in the Oil and Gas Industry |
359 |
Comparative Risk Analysis of Deep
Water Production Systems |
360 |
Riser Interaction Model: A
Combined T/F Domain Model |
363 |
Interdisciplinary Design for
Composite Coiled Tubulars |
364 |
Ultrasonic NDE of Spoolable
Composite Tubulars |
365 |
Composite Coiled Tubulars:
Effects of Viscoelasticity |
366 |
Dynamic Analysis Tool for Moored
Tanker-Based FPSOs, Including Large Yaw Motions |
371 |
Continued Study of Paraffin
Deposition in Multiphase Flowlines |
393 |
Total Lifecycle Cost Model for
Subsea Multiphase Boosting Operations |
397 |
Severe Slugging Elimination in
Ultra-Deep Water Tiebacks and Risers |
488 |
Global Analysis of FPSO and
Shuttle Tanker During Offloading |
| 490 |
CRA for Composite Drilling
and Production Risers |
| 492 |
Reliability of Subsea
Systems |
| 500 |
Risk Comparison of Subsea
versus Surface Processing |
| 535 |
Accuracy
of Liquid Level Sensors |
| 536 |
Vertical
Access Riser Comparative Risk Assessment |
|
584 |
Arctic Offshore Technology Assessment of
Exploration and Production Options for Cold Regions of the US Outer
Continental Shelf |
|
599 |
Joint Industry Project to Quantify Risks in Deepwater
Production Facilities and Flowlines in the GOM |
|
606 |
Hybrid Well Riser Risk of Failure and
Prevention |
|
623 |
Evaluation of High Integrity Pressure Protection System (HIPPS) |
on technologies needed for
moving into deep water as well as looking for solutions to current problems.
Examples of deep water production research include studies of production
riser technology, deep water multiphase flow, and investigating the safety
and reliability of new production systems. The MMS is also studying gas
migration and buildup in wells in hope of finding new solutions to this
persistent problem.