Country Lore: DIY Magnetic, Swiveling Work Light
This homemade device will let you work more easily in small dark places.
June/July 2008
By David Collins
|
With scraps of plastic pipe and some ingenuity, you can make this handy swivel flashlight.
MATTHEW STALLBAUMER
|
Some time ago, I went shopping for a flashlight to use for “under the hood” work on my Jeep. I decided to make my own swiveling magnetic flashlight holder and am pleased with the results. The magnet sticks to the hood and has 180 degrees of swivel, leaving no dark corners around the engine at all. I used it once when changing a tire in the dark on a country road. The magnet stuck to the side of the Jeep and I directed the light just where I needed it.
RELATED ARTICLES
Whether you’re looking for plans for a shed or trying to figure out why your water heater isn’t wor...
Tubular daylighting devices allow you to bring natural light into your home without the energy loss...
Home repair and renovation projects are on the to-do lists of many homeowners. But wanting to do th...
Starlight, But Skies are Too right
December/January 2001
by Fred Schaaf
One half of our...
Home repairs for the gas stove, including diagrams and prevention....
I used a 3-inch magnet from a junked auto speaker. It is 33⁄8 inches in diameter with a 11⁄4-inch center hole. This hole determines the dimensions of all the piping needed. I used scrap pieces of plastic plumbing pipe glued together with plumbing cement. It is designed to be used with the mini Mag Lite, which uses AA batteries and an LED bulb, and creates a focused beam and powerful light. The plastic tubing sizes I used were 1 inch, three-quarter inch, and the “T” piece was 11⁄4 inch in diameter.
David Collins
Sidney, Ohio