2000 Progress Report: Mercury Removal from Stack Gas by Aqueous Scrubbing
EPA Grant Number: R826694C724Subproject: this is subproject number 724 , established and managed by the Center Director under grant R828598
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
Center: Gulf Coast HSRC (Lamar)
Center Director: Ho, Tho C.
Title: Mercury Removal from Stack Gas by Aqueous Scrubbing
Investigators: Rochelle, Gary T.
Institution: University of Texas at Austin
EPA Project Officer: Krishnan, Bala S.
Project Period: September 1, 2000 through August 31, 2004
Project Period Covered by this Report: September 1, 2000 through August 31, 2001
RFA: Gulf Coast Hazardous Substance Research Center (Lamar University) (1996)
Research Category: Targeted Research , Hazardous Waste/Remediation
Description:
Objective:The specific objective of this study is to demonstrate the simultaneous removal by limestone slurry of mercury (Hg°) and chlorine with chlorine injection to the flue gas. In addition, the overall gas phase mass transfer coefficient for mercury removal by chlorine injection will be measured at field conditions.
Progress Summary:A four-inch diameter glass column has been modified and tested in the laboratory. The tower was packed to a height of 40 inches with #0.7 Nutter rings. The interfacial area of the packing was determined to be 30 ft2/ft3 by measuring CO2 absorption into a dilute solution of sodium hydroxide. The column will be operated at a liquid to gas ratio of 100-gal/1000-ft3 to simulated plant operating conditions. The inlet and outlet liquid lines are being tested in the laboratory. A flow test conducted on a fifty-foot section of 3/8" ID EDPM rubber hose yielded unsatisfactory results. Under gravity feed conditions with 8 feet of head, only a liquid flow rate of 0.9 gpm was achieved. This did not meet the design liquid flow rate of 1.8 gpm. A 1/2" ID EDPM rubber hose will now be used instead. The inlet gas section has been designed and is under construction. The gas inlet section will consist of a 1-inch stainless steel ball valve connected to a flange and to a 7/8" ID Teflon coated steel hose. The hose will then be connected to a straight section of pipe where a pitot tube will measure gas flow. Downstream of the pitot tube, the pipe will be enlarged from a diameter of 1 inch to 3 inches and into the quench section of the system. The quench section will then lead directly into the column. The sampling train for the Ontario Hydro Method is nearing completion. The impinger system is complete and the gas analysis instrumentation is almost complete. A defective turbine flow meter was returned and a new mass flow meter has been ordered.
Future Activities:In the next reporting period, the construction of the gas inlet section will be completed. Experiments will be conducted in the laboratory to test the sampling train of the Ontario Hydro Method. This will include passing simulated flue gas containing SO2, NOx, and mercury through the impinger solutions and instrumentation unit. In addition, more testing will be conducted on the quench and flow metering sections of the gas inlet. A flow test will be performed on the 1/2" ID liquid rubber hose once it is purchased. In the second and third year of the project, a wetted wall contactor will be constructed and used to measure the simultaneous absorption of Hg and Cl2 into sulfite solutions. The apparatus will minimize the opportunity for Cl2 to react with Hg in the bulk gas and on surfaces other than the active gas/liquid interface. These experiments will use the IMS analyzer for chlorine analysis and cold vapor atomic absorption (CVAA) for mercury analysis. The inlet gas will be 100 ppb mercury and 1 to 20 ppm chlorine. The solution will be 0 to 10 mM S(IV) and pH 3.5 - 8. We expect to quantify the kinetics of the reaction of mercury with chlorine at this lower pH. In the third year, this contactor will be used to add to the complexity of SO2 and O2 absorption. The simultaneous absorption of SO2 will maintain S(IV) concentration at the gas/liquid interface, which could serve to deplete chlorine and reduce the mercury. Initial field studies of mercury absorption into gypsum slurry in a packed absorber will be modeled by integrating over the absorber the theory of mass transfer with reaction in the boundary layer. An additional field study with the 4-inch diameter scrubber will be conducted in summer 2001 to validate our
Supplemental Keywords:mercury, chlorine, absorption. , Toxics, Air, Scientific Discipline, Waste, RFA, Engineering, Chemistry, & Physics, Chemical Engineering, HAPS, Incineration/Combustion, air toxics, Chemistry, Environmental Engineering, Environmental Chemistry, 33/50, hazardous waste incinerators, flue gases, ambient air quality, flue gas, combustion byproducts, combustion technology, emission control strategies, hazardous air pollutants, air scrubbers, trace metals, trace metal emissions, trace metal emission control, combustion flue gases, aqueous scrubbing, metallic emissions, airborne metals, mercury & mercury compounds, emission control technologies, flue gas emissions, Hg, mercury, analytical chemistry, air pollution control, clean combustion, municipal waste combustor, combustor/incinerator emissions, control, flue gas , wet scrubber system, Chlorine, emission controls, Mercury Compounds, combustion emissions, municipal waste incinerator
Progress and Final Reports:
Original Abstract
Main Center Abstract and Reports:
R828598 Gulf Coast HSRC (Lamar)
Subprojects under this Center:
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
R822721C529 Environmentally Acceptable Endpoints: Risk Based Remediation Using Bioremediation
R822721C552 Degradative Solidification/Stabilization Technology for Chlorinated Hydrocarbons
R822721C569 Treatment and Product Recovery: Supercritical Water Oxidation of Nylon Monomer Manufacturing Waste
R822721C620 Colloidal Fouling of Membranes: Implications in the Treatment of Textile Dye Wastes and Water Reuse
R822721C626 Catalytic Hydroprocessing of Chlorinated Organics
R822721C627 The Interaction of Microbial Activity and Zero Valent Iron Permeable Barrier Technology
R822721C630 Microbial Cometabolism of Recalcitrant Chemicals in Contaminated Air Streams
R822721C633 Catalyst Lifetime Studies for Chlorocarbon Steam Reforming
R822721C635 Electrokinetic/Surfactant-Enhanced Remediation of Hydrophobic Pollutants in Low Permeability Subsurface Environments
R822721C636 Transformation Reactions of Nitroaromatic and Nitrogen Heterocyclic Compounds on Granular Activated Carbon (GAC) Surfaces: Enhancement of GAC Adsorption in Natural and Engineered Environmental Systems
R822721C640 Environmentally Friendly Organic Synthesis in Supercritical Fluids
R822721C645 Development and Evaluation of an Integrated Model to Facilitate Risk-Based Corrective Action at Superfund Sites
R822721C651 Adjustable Biopolymer Chelators for Cadmium, Lead and Mercury
R822721C653 New Electrochemically Smart Catalysts for Hazardous Waste Management and Development of Capillary Electrophoresis for Analysis of their Products
R822721C655 Soil Sampling in South Alabama Oil Fields
R822721C659 Subsurface Contamination Site Characterization via a Computer-Aided Visual Tool
R822721C661 New Insoluble supports for Protein Immobilization for Use in Metalloprotein Affinity Metal Chromatography
R822721C663 Soil Remediation with Ultra-High-Efficiency Hydrocyclones
R822721C669 Solid Acid Catalyzed Alkylation in Supercritical Fluids
R822721C679 Regeneration/Reactivation of Carbon Adsorbents by Radio Frequency (RF) Induction Heating
R822721C687 Improved Halogen Resistance of Catalytic Oxidation
R822721C696 Phytoremediation and Bioremediation of Land Contaminated By PAHs, PCBs, and TNT
R822721C697 Fundamental and Kinetic Investigation of Sorbent Technology for Optimum Mercury Emission Control
R822721C700 Effects of Natural and Cyclic Variations on Contaminant Fate and Transport
R822721C703 Enhancement of DNAPL Dissolution Rates by Dechlorinating Anaerobes
R826694C620 Colloidal Fouling of Membranes: Implications in the Treatment of Textile Dye Wastes and Water Reuse
R826694C625 Enhanced Treatment of DNAPLs Contaminated Soils and Groundwater Using Biosurfactants: In-Situ Bioremediation
R826694C626 Catalytic Hydroprocessing of Chlorinated Wastes
R826694C627 The Interaction of Microbial Activity and Zero Valent Iron Permeable Barrier Technology
R826694C629 Biofiltration of BTEX in Petroleum-Contaminated Soil Remediation Off-Gas
R826694C630 Microbial Cometabolism of Recalcitrant Chemicals in Contaminated Air Streams
R826694C633 Catalyst Lifetime Studies for Chlorocarbon Steam Reforming
R826694C635 Electrokinetic/Surfactant-Enhanced Remediation of Hydrophobic Pollutants in Low Permeability Subsurface Environments
R826694C636 Transformation Reactions of Nitroaromatic and Nitrogen Heterocyclic Compounds on Granular Activated Carbon (GAC) Surfaces: Enhancement of GAC Adsorption in Natural and Engineered Environmental Systems
R826694C640 Environmentally Friendly Organic Synthesis in Supercritical Fluids
R826694C645 Development and Evaluation of an Integrated Model to Facilitate Risk-Based Corrective Action at Superfund Sites
R826694C651 Adjustable Biopolymer Chelators for Cadmium, Lead, and Mercury Remeidation
R826694C659 Subsurface Contamination Site characterization Via a Computer-Aided Visual Tool
R826694C661 New Insoluble supports for Protein Immobilization for Use in Metalloprotein Affinity Metal Chromatography
R826694C669 Solid Acid Catalyzed Alkylation in Supercritical Reaction Media
R826694C679 Regeneration and Reactivation of Carbon Adsorbents by Radio Frequency Induction Heating
R826694C696 Phytoremediation and Bioremediation of Land Contaminated By PAHs, PCBs, and TNT
R826694C697 Fundamental and Kinetic Investigation of Sorbent Technology for Optimum Mercury Emission Control
R826694C700 Effects of Natural Cyclic Variations on Contaminated Fate and Transport
R826694C703 Enhancement of DNAPL Dissolution Rates by Dechlorinating Anaerobes
R826694C705 A Pilot Plant for Producing Mixed Ketones from Waste Biomass
R826694C722 The Effects of an Oily-Phase on VOC Emissions from Industrial Wastewater
R826694C724 Mercury Removal from Stack Gas by Aqueous Scrubbing
R826694C725 Transport, Fate and Risk Implications of Environmentally Acceptable Endpoint Decisions
R826694C731 Development and Application of a Real-Time Optical Sensor for Atmospheric Formaldehyde
R826694C734 An Advanced System for Pollution Prevention in Chemical Complexes
R828598C001 Field Study Abstract: A Model of Ambient Air Pollution in Southeast Texas Using Artificial Neural Network Technology
R828598C002 Hollow Fiber Membrane Bioreactors for Treating Water and Air Streams Contaminated with Chlorinated Solvents
R828598C003 Fugitive Emissions of Hazardous Air Pollutants from On-Site Industrial Sewers
R828598C004 Biofiltration Technology Development
R828598C005 A Risk-Based Decision Analysis Approach for Aquifers Contaminated with DNAPLs
R828598C006 In-Situ Remediation for Contaminated Soils Using Prefabricated Vertical Drains
R828598C007 Membrane Technology Selection System for the Metal Finishing Industry
R828598C008 Sequential Environments for Enhanced Bioremediation of Chlorinated Aliphatic Hydrocarbons
R828598C009 Waste Minimization in the Magnetic Tape Industry: Waterborne Coating Formulations for Magnetic Tape Manufacture
R828598C010 Soil Remediation by Agglomeration with Petroleum Coke
R828598C011 Recovery of Dilute Phosphoric Acid in Waste Streams Using Waste Gas Ammonia: The Regenerative MAP/DAP Process
R828598C012 Stochastic Risk Assessment for Bioremediation
R828598C013 Selective Removal of Heavy Metals from Wastewater by Chelation in Supercritical Fluids
R828598C014 Optimization of Treatment Technologies for Detoxification of PCB Contaminated Soils
R828598C015 Wastewater Remediation by Catalytic Wet Oxidation
R828598C016 Permanence of Metals Containment in Solidified and Stabilized Wastes
R828598C017 Combustion Enhancement by Radial Jet Reattachment - Low Generation of Hazardous Gases and High Thermal Efficiency
R828598C018 A Process To Convert Industrial Biosludge and Paper Fines to Mixed Alcohol Fuels
R828598C019 Homogeneous Catalysis in Supercritical Carbon Dioxide
R828598C020 Ultrasonic Enhancement of the Removal of Heavy Metals
R828598C021 The Binding Chemistry and Leaching Mechanisms of Advanced Solidification/Stabilization Systems for Hazardous Waste Management
R828598C022 Development of an Air-Stripping and UV/H2O2 Oxidation Integrated Process To Treat a Chloro-Hydrocarbon-Contaminated Ground Water
R828598C023 A Comparative Study of Siting Opposition in Two Counties
R828598C024 Sonochemical Treatment of Hazardous Organic Compounds II: Process Optimization and Pathway Studies
R828598C025 Laser Diagnostics of the Combustion Process within a Rotary Kiln Incinerator
R828598C026 Use of Inorganic Ion Exchangers for Hazardous Waste Remediation
R828598C027 Kaolinite Sorbent for the Removal of Heavy Metals from Incinerated Lubricating Oils
R828598C028 Destruction of Chlorinated Hydrocarbons in Process Streams Using Catalytic Steam Reforming
R828598C029 Integrated Process Treatment Train (Bioremediation {Aerobic/Anaerobic} and Immobilization) for Texas Soils Contaminated with Combined Hazardous Wastes
R828598C030 Photo-Oxidation by H2O2/VisUV of Off-Gas Atmospheric Emissions from Industrial and Environmental Remediation Sources
R828598C031 Concentrated Halide Extraction and Recovery of Lead from Soil
R828598C032 Biodegradable Surfactant for Underground Chlorinated Solvent Remediation
R828598C033 A Software Guidance System for Choosing Analytical Subsurface Fate and Transport Models Including a Library of Computer Solutions for the Analytical Models
R828598C034 Hydrodynamic Modeling of Leachate Recirculating Landfill
R828598C035 Measurement of Oxygen Transfer Rate in Soil Matrices
R828598C036 Sorbent Technology for Multipollutant Control During Fluidized Bed Incineration
R828598C037 Pollution Prevention by Process Modification Using On-Line Optimization
R828598C038 Pollution Prevention by Process Modification
R828598C039 Water Solubility and Henry's Law Constant
R828598C040 Transferring Technical Information on Hazardous Substance Research by Publishing on the World Wide Web
R828598C041 Stress Protein Responses to Multiple Metal Exposure in Grass Shrimp
R828598C042 Life-Cycle Environmental Costing for Managing Pollution Prevention in the Chemical and Petroleum Refining Industries: A Cross-Border Approach
R828598C687 Improved Halogen Resistance of Catalytic Oxidation Through Efficient Catalyst Testing
R828598C696 Phytoremediation and Bioremediation of Land Contaminated By PAHs, PCBs, and TNT
R828598C697 Fundamental and Kinetic Investigation of Sorbent Technology for Optimum Mercury Emission Control
R828598C700 Effects of Natural Cyclic Variations on Contaminated Fate and Transport
R828598C703 Enhancement of DNAPL Dissolution Rates by Dechlorinating Anaerobes
R828598C705 A Pilot Plant for Producing Mixed Ketones from Waste Biomass
R828598C722 The Effects of an Oily-Phase on VOC Emissions from Industrial Wastewater
R828598C724 Mercury Removal from Stack Gas by Aqueous Scrubbing
R828598C725 Transport, Fate and Risk Implications of Environmentally Acceptable Endpoint Decisions
R828598C731 Development and Application of a Real Time Optical Sensor for Atmospheric Formaldehyde
R828598C734 An Advanced System for Pollution Prevention in Chemical Complexes
R828598C743 Field Demonstration of Ultrasound Enhancement of Permeable Treatment Walls
R828598C744 Optical Fibers Coated With Titania Membrane/UV-Generating Crystal in a Distributed-Light Photoreactor for VOC Oxidation
R828598C749 Characterization and Modeling of Indoor Particulate Contaminants In a Heavily Industrialized Community
R828598C753 Adsolubilization and Photocatalysis in a Semiconducting Monolithic Reactor for Wastewater Treatment
R828598C754 Remote Detection of Gas Emissions in Industrial Processes
R828598C759 Searching for Optimum Composition of Phosphogypsum: Fly ash: Cement Composites for Oyster Culch Materials
R828598C761 Development of a Phytologically-Based Biosorptive Water Treatment Process
R828598C766 Chlorinated Solvent Impact and Remediation Strategies for the Dry Cleaning Industry
R828598C769 Soil/Sediment Remediation by Hot Water Extraction Combined with In-Situ Wet Oxidation
R828598C771 Fluoracrylate Polymer Supported Ligands as Catalysts for Environmentally Benign Synthesis in Supercritical Fluids
R828598C774 The Feasibility of Electrophoretic Repair of Impoundment Leaks
R828598C777 Surfactant Enhanced Photo-oxidation of Wastewaters
R828598C778 Stationary Power Generation Via Solid Oxide Fuel Cells: A Response to Pollution and Global Warming
R828598C786 Photocatalytic Recovery of Sulfur and Hydrogen From Hydrogen Sulfide
R828598C787 Biosurfactant Produced from Used Vegetable Oil for removal of Metals From Wastewaters and Soils
R828598C789 Genetic Engineering of Enzymatic Cyanide Clearance
R828598C791 Characterizing the Intrinsic Remediation of MTBE at Field Sites
R828598C799 Simultaneous Water Conservation/Recycling/Reuse and Waste Reduction in Semiconductor Manufacturing
R828598C801 Building Defined Mixed Cultures To Biodegrade Diverse Mixtures Of Chlorinated Solvents
R828598C802 Engineering of Nanocrystal Based Catalytic Materials for Hydroprocessing of Halogenated Organics
R828598C807 Commercial Demonstration of Hydrogen Peroxide Injection to Control NOx Emissions from Combustion Sources
R828598C809 Evaluating Source Grouting and ORC for Remediating MTBE Sites
R828598C810 Application of Total Cost Assessment To Process Design In the Chemical Industry
R828598C846 Quantitative Demonstration of Source-Zone Bioremediation in A Field-Scale Experimental Controlled Release System
R831276C001 DNAPL Source Control by Reductive Dechlorination with Fe(II)
R831276C002 Arsenic Removal and Stabilization with Synthesized Pyrite
R831276C003 A Large-Scale Experimental Investigation of the Impact of Ethanol on Groundwater Contamination
R831276C004 Visible-Light-Responsive Titania Modified with Aerogel/Ferroelectric Optical Materials for VOC Oxidation
R831276C005 Development of a Microwave-Induced On-Site Regeneration Technology for Advancing the Control of Mercury and VOC Emissions Employing Activated Carbon
R831276C006 Pollution Prevention through Functionality Tracking and Property Integration
R831276C007 Compact Nephelometer System for On-Line Monitoring of Particulate Matter Emissions
R831276C008 Effect of Pitting Corrosion Promoters on the Treatment of Waters Contaminated with a Nitroaromatic Compounds Using Integrated Reductive/Oxidative Processes
R831276C009 Linear Polymer Chain and Bioengineered Chelators for Metals Remediation
R831276C010 Treatment of Perchlorate Contaminated Water Using a Combined Biotic/Abiotic Process
R831276C011 Rapid Determination of Microbial Pathways for Pollutant Degradation
R831276C012 Simulations of the Emission, Transport, Chemistry and Deposition of Atmospheric Mercury in the Upper Gulf Coast Region
R831276C013 Reduction of Environmental Impact and Improvement of Intrinsic Security in Unsteady-state
R831276C014 Integrated Chemical Complex and Cogeneration Analysis System: Greenhouse Gas Management and Pollution Prevention Solutions
R831276C015 Improved Combustion Catalysts for NOx Emission Reduction
R831276C016 A Large-Scale Experimental Investigation of the Impact of Ethanol on Groundwater Contamination
R831276C017 Minimization of Hazardous Ion-Exchange Brine Waste by Biological Treatment of Perchlorate and Nitrate to Allow Brine Recycle
R831276C018 Integrated Chemical Complex and Cogeneration Analysis System: Greenhouse Gas Management and Pollution Prevention Solutions