Understanding FCC Narrowbanding Requirements
- Key Points About FCC Narrowbanding Requirements
- Overview
- Deadlines
- Planning for the Move to Narrowband
- More Information on Communications Technology Issues
Key Points About FCC Narrowbanding Requirements
- Most current public safety radio systems use 25 kHz-wide channels.
- The Federal Communications Commission (FCC) has mandated that all non-Federal public safety licensees using 25 kHz radio systems migrate to narrowband 12.5 kHz channels by January 1, 2013.
- Agencies that do not meet the deadline face the loss of communication capabilities.
- Agencies need to start planning now to migrate to narrowband systems by assessing their current radio equipment and applying for new or modified licenses.
Overview
![](https://webarchive.library.unt.edu/web/20080925004204im_/http://www.ojp.usdoj.gov/nij/images/217865-narrowband-channels.jpg)
Figure 1: Narrowband channels allow additional channels to exist in the same spectrum.
Private land mobile radio (LMR) systems—including municipal government and State and local public safety systems—use blocks of radio spectrum called channels. (See Radio Spectrum9766.) Historically, LMR systems have used 25 kHz-wide channels. In December 2004, the Federal Communications Commission mandated that all private LMR users operating below 512 MHz move to 12.5 kHz narrowband voice channels and highly efficient data channel operations by January 1, 2013. [1] This migration complements a National Telecommunications and Information Administration mandate for more rapid Federal agency migration to 12.5 kHz narrowband operation by January 1, 2008. The earlier Federal deadline affects State and local FCC licensees that interface or share frequencies with Federal radio systems. [2]
Using narrowband channels will ensure that agencies take advantage of more efficient technology and, by reducing channel width, will allow additional channels to exist within the same spectrum space, as illustrated in figure 1.
Deadlines
To phase in the migration deadline of January 1, 2013, the FCC has established interim deadlines. The first important deadline is January 1, 2011, after which:
- The FCC will not grant applications for new voice operations or applications to expand the authorized contour of existing stations that use 25 kHz channels. Only narrowband authorizations will be granted.
- The FCC will prohibit manufacture or importation of new equipment that operates on 25 kHz channels. This will reduce the availability of new equipment for legacy radio systems and will affect how agencies maintain and upgrade older systems.
Planning for the Move to Narrowband
Public safety agencies need to aggressively develop a strategy to meet narrowband deadlines to avoid cancellation of existing wideband FCC authorizations. Although the migration deadline may seem far off, the long lead time and interim deadlines make it necessary for agencies to plan well in advance.
Assess current equipment and start planning.To prepare for the migration, public safety agencies should start assessing their radio systems and planning for replacements or upgrades. They should inventory their current equipment to ascertain what can be converted to 12.5 kHz and what will need to be replaced before January 1, 2013. Most new equipment has the capability for both 25 kHz and 12.5 kHz operation because any VHF/UHF radio equipment accepted by the FCC after February 14, 1997, had to have 12.5 kHz capability. The 2.5 kHz narrowband equipment is available in both conventional analog FM and digital formats (such as Project 25), so narrowband conventional FM systems will be compliant. Local governments should develop contingency plans to accommodate system changes for both public safety and nonpublic safety systems.
Obtain new or modified licenses.To move to narrowband operations, agencies must apply for new frequencies or modify existing licenses. An agency that is licensed for a 25 kHz-wide channel is not guaranteed two 12.5 kHz channels. Licensees will have to justify to the FCC why they need additional channels. Consideration of applications for new narrowband licenses will follow the same process as a new license application. As agencies migrate to narrowband
operation, however, the pool of available frequencies will increase.
For more information on communications interoperability, contact a regional National Law Enforcement and Corrections Technology Center:
Northeast (Rome, NY) 888–338–0584
Southeast (Charleston, SC) 800–292–4385
Rocky Mountain (Denver, CO) 800–416–8086
Western (El Segundo, CA) 888–548–1618
Northwest (Anchorage, AK) 866–569–2969
Rural Law Enforcement Technology Center 866–787–2553
Notes
[1] Per the FCC mandate, post-narrowbanding data channels must have an efficiency of 4.8kbps/second/6.62KHz. See FCC Order 05–9, WT Docket No. 96–86, January 7, 2005: http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-05-9A1.pdf; and FCC Order 04–292, WT Docket No. 99–87 and RM–9932, December 23, 2004: http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-04-292A1.pdf.
[2] FCC narrowbanding rules for agencies operating with FCC licenses but using Federal spectrum are frequency specific and may follow a more aggressive
schedule. Those agencies may operate on these frequencies only on a secondary (unprotected and noninterfering) basis. See FCC Report and Order 05–69, ET Docket No. 04–243, March 11, 2005: http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-05-69A1.pdf.