Section 30.7
§ 30.7 Information required on Shipper's Export Declarations.
The following information shall be furnished in the appropriate spaces
provided on the paper copy of the Shipper's Export Declaration and shall
conform to the requirements set forth in this section. (See § 30.92
for information as to the statistical classification Schedules C and D
referred to in this section. Also, see § 30.8 for information required
on Form 7513 in addition to these requirements.) For information required
to be filed electronically see § 30.63.(a) Port of export. The name
of the U.S. Customs port of exportation shall be entered in terms of Schedule
D, Classification of Customs Districts and Ports. (See § 30.20(c)
for definition of port of exportation.) For shipments by mail, the name
of the Post Office where the package is mailed shall be inserted in the
space for U.S. port of export.
(b) Method of transportation. Except on Commerce Form 7513, the method
of transportation by which the goods are exported (or shipped to a nonforeign
area where the declaration covers such a shipment) i.e., vessel (including
ferry), air, or other, shall be indicated by check mark in the appropriate
space. For shipments by means of transportation other than vessel or air
the specific method of transportation (rail, truck, pipeline, etc.) used
should be entered. ``Other'' should be checked for exported aircraft being
flown away, vessels exported under their own power or afloat, or for other
vehicles exported other than aboard another carrier, and the manner in
which exported should be specified; e.g., ``flown away,'' ``in tow,''
etc.
(c) Exporting carrier. Information concerning the specific exporting carrier
shall be reported as follows:
(1) For shipments by vessel, the name and flag nationality of the ship
and the number or name of the pier at
which the goods were laden shall be shown.
(2) For shipments by air, the name of the airline shall be reported.
(3) For shipments by other than vessel or air, the carrier shall be identified
by name and number or other
available designation.
In all cases, the information shall be furnished as to the carrier, which
transports the merchandise to a foreign country or to an ultimate destination
in a nonforeign area, and not as to a different carrier, which may have
transported the goods to the seaport, airport, or border port of export
for final shipment.(d) Name of the U.S. principal party in interest and
U.S. principal party in interest's Employer Identification Number (EIN).
For purposes of completing the paper SED or AES record the exporter (U.S.
principal party in interest) is the U.S. principal party in interest.
The name and address (number, street, city, state, ZIP Code) of the U.S.
principal party in interest and the U.S. principal party in interest's
EIN shall be entered where requested on the SED or AES electronic record.
The EIN shall be the U.S. principal party in interest's own and not another's
EIN.
(1) Name of the U.S. principal party in interest. In all export transactions,
the person listed in the U.S. principal party in interest block on the
SED or in the U.S. principal party in interest field on the AES record
must be the exporter (U.S. principal party in interest) in the transaction.
The U.S. principal party in interest is the person in the United States
that receives the primary benefit, monetary or otherwise, of the export
transaction. Generally that person is the U.S. seller, manufacturer, order
party, or foreign entity, if in the United States when the items are purchased
or obtained for export. The foreign entity must then follow the provisions
for preparing and filing the SED or AES record specified in Secs. §
30.4 and § 30.7 pertaining to the U.S. principal party in interest.
(See § 30.4 for details on the specific reporting responsibilities
of exporter (U.S. principal party in interest)).
(2) U.S. principal party in interest's Employer Identification Number
(EIN). An exporter (U.S. principal party in interest) shall report its
own Internal Revenue Service (IRS) EIN in the U.S. principal party in
interest's (IRS) EIN block/field on the SED. If, and only if, no IRS EIN
has been assigned to the exporter (U.S. principal party in interest),
the exporter's (U.S. principal party in interest) own SSN, preceded by
the symbol ``SS,'' must be reported on the paper SED. On the AES record
the appropriate SSN symbol must be reported. When a foreign entity is
in the United States when the items are purchased or obtained for export
it is the exporter (U.S. principal party in interest). In such situations,
when the foreign entity does not have an IN or SSN, a border crossing
number, passport number, or any number assigned by U.S. Customs must be
reported on the SED or the AES record. On the paper SED, the appropriate
number should be preceded by the symbol ``T.'' On the AES record, the
appropriate AES identifier code as specified in the Automated Export System
Trade Interface Requirements (AESTIR) must be reported. Use of another's
EIN or SSN is prohibited.
(e) Forwarding or other agent. The name and address of the duly authorized
forwarding or other agent (if any) of a principal party in interest must
be recorded where required on the SED or AES record. (See § 30.4
for details on the specific reporting responsibilities of forwarding or
other agents).
(f) Ultimate consignee. The name and address (place, country) of the ultimate
consignee whether by sale in the United States or abroad or by consignment
shall be stated on the export declaration. For exports to foreign countries,
the ultimate consignee shall be the same person so designated in the validated
export license or authorized to be ultimate consignee under the applicable
general license in conformity with Export Administration Regulations.
(g) Intermediate consignee. The name and address of the intermediate consignee
(if any) shall be stated. For exports to foreign countries, the intermediate
consignee shall be the person named as such in the validated export license
or authorized to act as such under the applicable general license and
in conformity with the Export Administration Regulations. If there is
no intermediate consignee, the word ``none'' shall be entered on the Shipper's
Export Declaration. (On Form 7513 the name and address of the intermediate
consignee (if any) in a foreign country must be shown below the description
of commodities across columns 1 through 6.)
(h) Foreign port of unloading. For shipments by vessel and by air the
foreign port and country of unloading (i.e., the foreign port and country
at which the merchandise will be unlad-en from the exporting carrier)
shall be shown on the Shipper's Export Declaration in addition to the
country of ultimate destination. The reporting of ``optional'' ports of
unloading is not permissible except as provided in the Export Administration
Regulations. Where optional ports of unloading are named on the Shipper's
Export Declaration under the permissible conditions, a photocopy, carbon,
or other legible copy of the originally filed Shipper's Export Declaration
indicating the actual port of unloading shall be filed by the exporter
or his agent with the Customs Director as soon as the actual port of unloading
is known to the exporter. (See § 30.16 of these regulations.) Information
as to port of unloading is required for shipments by vessel and air only.
(i) Country of destination. Country of destination shall be reported on
the Shipper's Export Declaration in terms of the names designated in Schedule
C-E, Classification of Country and Territory Designations for U.S. Export
Statistics, as follows:
(1) For shipments under validated export licenses, the country of ultimate
destination shown on the export declaration shall conform to the country
of ultimate destination as shown on the license.
(2) For shipments not moving under validated export license, the country
of ultimate destination as known to the exporter at the time or exportation
shall be shown on the export declaration. ``Country of ultimate destination''
means the country in which the goods are to be consumed or further processed
or manufactured. The country to which the goods are being shipped is not
the country of ultimate destination for purposes of preparing the Shipper's
Export Declaration if the exporter has knowledge at the time the goods
leave the United States that they are intended for re-export or transshipment
in their present form to another known country. For goods shipped to Canada,
Panama, Hong Kong, Belgium or The Netherlands for example, special care
should be exercised before reporting these countries as the ultimate destination,
since these are countries through which merchandise from the United States
is frequently transshipped. If the shipper does not know the ultimate
destination of the goods, the country of destination to be shown on the
export declaration is the last country, as known to the exporter at the
time of shipment from the United States, to which the goods are to be
shipped in their present form. (For instructions as to the reporting of
country of destination for vessels sold or transferred from the United
States to foreign ownership, see § 30.33.)
(j) Marks and numbers. For purposes of identification of the export declaration
with the merchandise it covers, the marks, numbers, or other identification
shown on the packages should be inserted. This information is not required
for shipments by mail inasmuch as the declaration is presented to the
Postmaster with the packages being mailed.
(k) Number and kind of packages. The number and kind of packages (i.e.,
boxes, barrels, baskets, bales, etc.) shall be stated.
(l) Description of commodities and Schedule B number. The correct commodity
number as provided in Schedule B, Statistical Classification of Domestic
and Foreign Commodities Exported from the United States, shall be entered
in the space provided on the Shipper's Export Declaration form, and a
description of the merchandise shall be supplied in the ``Description
of Commodities'' column in sufficient detail to permit the verification
of the Schedule B commodity number. The name of the commodity, in terms
which can be identified or associated with the language used in Schedule
B (usually the commercial name of the commodity), and any and all characteristics
of the commodity which distinguish it from commodities of the same name
covered by other Schedule B classifications shall be clearly and fully
stated. Careful reference to the Schedule B classification scheme for
related commodities as well as for the commodity being shipped is necessary
in order to establish which particular characteristics must be stated
in the description to permit verification of the correct Schedule B commodity
number and to eliminate any question that some other commodity number
might apply. A description of commodities in the kind of detail specified
above is a separate requirement, and the furnishing of the correct Schedule
B commodity number does not relieve the exporter of furnishing, in addition,
a complete and accurate commodity description in accordance with this
requirement. If the shipment is moving under a validated license, the
description shown on the export declaration shall conform with that shown
on the validated export license. However, where the description on the
license does not state all of the characteristics of the commodity, which
are needed to completely verify the commodity number, as described above,
the missing characteristics, as well as the description shown on the license,
shall be stated in the commodity description on the Shipper's Export Declaration.
(m) Export license number and expiration date (or general license symbol).
For exports to foreign countries the export license number and expiration
date, or the general license symbol shall be shown below the description
of the commodity.
(n) Net quantity. Where a unit of quantity is specified in Schedule B
for the commodity number in which the item is classified, net quantity
is required to be reported in the specified unit, and the unit in which
reported should be indicated on the declaration following the net quantity
figure. Where the unit of quantity specified in Schedule B is ``No.''
(number), ``Each'' or the abbreviation ``Ea.'' may be indicated on the
declaration as the unit of quantity. If no unit of quantity is specified
in Schedule B for a numbered classification, but a validated export license
for the item specifies a unit of quantity, the net quantity shall be reported
on the declaration in terms of the unit of quantity specified in the validated
license. If neither Schedule B nor an applicable validated license specifies
a unit of quantity for the item, net quantity is not required to be reported,
and an ``X'' should be entered in the ``net quantity'' column on the Shipper's
Export Declaration. Where Schedule B calls for two units of quantity,
net quantity shall be reported in terms of both units. Where the specified
unit is in terms of weight (ounces, pounds, etc.) the net quantity should
reflect the net weight, exclusive of the weight of barrels, boxes, or
other bulky coverings, and exclusive of salt or pickle in the case of
salted or pickled fish or meats. Note, however, That for a few commodities
where ``content lb.,'' ``dry weight,'' or some similar weight unit is
specified in Schedule B, the net quantity to be reported on the Shipper's
Export Declaration may be less than the net weight. In the expression
of net quantities, fractions of one-half unit or upward will be counted
as a whole unit, and fractions of less than one-half unit will be ignored,
except that where the total net quantity is less than one-half of the
unit prescribed for the commodity in Schedule B ``Less than one-half (unit)''
should be reported. (For example, where the unit for a given commodity
is in terms of ``M board feet,'' a net quantity of 8,400 board feet would
be reported as ``8 M bd. ft.'' and a net quantity of 900 board feet would
be reported as ``1 M bd. ft.''; however, a total net quantity of 450 board
feet should not be ignored but should be reported as ``less than one-half
M bd. ft.''.)
(o) Gross (shipping) weight. In addition to specifying the net quantity
in the units required by Schedule B, the gross shipping weight in pounds,
including the weight of containers, shall be shown for all shipments by
vessel and air. However, for containerized cargo in lift vans, cargo vans,
or similar substantial outer containers, the weight of such containers
should not be included in the gross weight of the commodities. If gross
shipping weight information is not available for individual Schedule B
items for the reason that commodities covered by more than one Schedule
B number are contained in the same shipping container, approximate shipping
weights, estimated as accurately as is practicable, may be shown on the
Shipper's Export Declarations for each Schedule B item in the container.
The total of the estimated weights must equal the actual shipping weight
of the entire container or containers and contents. Gross shipping weight
is not required for shipments by mail or for shipments by methods of transportation
other than vessel or air.
(p) ``D'' (Domestic) or ``F'' (Foreign). (1) The export declaration covering
exports to foreign countries shall show foreign goods separately from
goods of domestic production. Exports of foreign merchandise include those
commodities which are the growth, produce, or manufacture of foreign countries
which entered the United States, including U.S. Foreign Trade Zones, as
imports and which at the time of exportation have undergone no change
in form or condition or enhancement in value by further manufacture in
the United States, including U.S. Foreign Trade Zones, Puerto Rico, or
U.S. Possessions.
(2) Exports of domestic merchandise include those commodities which are
the growth, produce, or manufacture of the United States, including U.S.
Foreign Trade Zones, Puerto Rico, or U.S. Possessions (including commodities
incorporating foreign components), and those articles of foreign origin
which have been enhanced in value or changed from the form in which imported
by further manufacture or processing in the United States, including U.S.
Foreign Trade Zones, Puerto Rico, or U.S. Possessions.
(3) The above distinction between domestic and foreign merchandise is
intended only for use in reporting on the Shipper's Export Declaration
and is intended for statistical purposes only.
(4) On the Shipper's Export Declaration in the column headed ``Specify
`D' or `F' '', domestic merchandise shall be identified by the designation
``D'' and foreign merchandise shall be identified by the designation ``F.''
On the Shipper's Export Declaration for In-Transit Goods, Form 7513, one
of the following statements, whichever is appropriate, shall be shown
across the body of the form within columns 1 through 6:
(i) For in-transit shipments of domestic (U.S.) merchandise, ``The merchandise
described herein is of the growth, production or manufacture of the United
States;'' and (ii) For in-transit shipments of foreign merchandise, ``The
merchandise described herein is of foreign origin.''
(5) Foreign Military Sales (FMS) indicator. For any export that represents
the delivery of goods or the repair of military equipment under provisions
of the FMS program (including those financed under the
Foreign Military Finance (FMF) Program), an ``M'' indicator code should
be included in Item (16) on Commerce Form 7525-V and in Item (23) on Commerce
Form 7525-V-ALT (Intermodal) of the paper SED, with an ``FS'' Export Information
Code on the Commodity Line Item Description (CL1) field of the Automated
Export System (AES) record layout, and a ``3'' indicator code in field
2 (Type) of the Automated Export Reporting Program (AERP) record layout.
This indicator code should be used in lieu of the domestic (D) or foreign
(F) indicator code required in those fields on the SED Form, the AES record,
and the AERP record. The FMS indicator code will serve to identify more
accurately that segment of U.S. exports that represent FMS deliveries
in the U.S. export statistics.
(q) Value. (1) In general, the value to be reported on the Shipper's Export
Declaration or AES record shall be the value at the U.S. port of export
(selling price or cost if not sold, including inland freight, insurance,
and other charges to U.S. port of export) (nearest whole dollar; omit
cents figures). The ``Selling price'' for goods exported pursuant to sale,
and the value to be reported on the SED or AES record, is the exporter's
(U.S. principal party in interest) price to the foreign principal party
in interest, net any unconditional discounts from list price, but without
deducting any discounts which are conditional upon a particular act or
performance on the part of the customer. Commissions to be paid by an
exporter (U.S. principal party in interest) to his agent abroad, or to
be deducted from the selling price by the agent abroad should be excluded.
For goods shipped on consignment without a sale actually having been made
at the time of export, the ``selling price'' to be reported on the SED
or AES record is the market value at the time of export at the United
States port from which exported.
(2) The value reported on the Shippers' Export Declaration shall exclude:
The cost of loading on the exporting vessel, aircraft, car or vehicle
at the port of exportation; freight, insurance, and any other charges
or transportation costs beyond the port of export; and any duties, taxes,
or other assessments imposed by foreign countries. The value reported
shall include inland or domestic freight or other charges to the seaport,
airport, or border port of exportation.
(3) The value to be reported as defined above is (or is equivalent to)
an f.a.s. (Free alongside ship) value. Therefore, where goods are sold
f.o.b. a U.S. point other than the port of exportation, freight, insurance,
and other costs to the border, sea, or airport of exportation shall be
added to the selling price (as defined above) for purposes of reporting
value on the Shipper's Export Declaration. If the actual amount of such
domestic costs is not available, an estimate of the domestic costs shall
be added. Where goods are sold at a ``delivered'' price, c.i.f. foreign
destination, the cost of loading on the exporting carrier at the port
of exportation, if any, and freight, insurance, and other costs beyond
the port of exportation should be subtracted from the price for purposes
of reporting value on the Shipper's Export Declaration. If the actual
amount of such costs is not available, an estimate of the costs should
be subtracted. Costs added to or subtracted from the selling price in
accordance with the above instructions should not be itemized or shown
separately on the Shipper's Export Declaration, but the value reported
should be the value after the making of such adjustments, where they are
required to arrive at ``value at U.S. port of export.'' In the expression
of values in export declarations, fractions of a dollar less than 50 cents
should be ignored, and fractions of 50 cents or upward should be counted
as $1.
(4) For definitions of the value to be shown on the Shipper's Export Declaration
for special types of transactions where the commodities are not being
exported pursuant to commercial sales, or where subsidies, government
financing or participation, or other unusual conditions are
involved, see § 30.30.
(r) Date of exportation. Information as to date of exportation is not
required to be reported for shipments by vessel or by mail. For other
shipments, the date of departure (or date of clearance, if date of departure
is not known) shall be shown on the Shipper's Export Declaration as the
date of exportation.
(s) Designation of agent and signature. For information regarding the
use of the space provided on Form 7525-V and 7525-V-Alternate (Intermodal)
for authorization of agent, and for requirements as to signature, see
§ 30.4.
(t) Point (state) of origin or Foreign Trade Zone number. (Not required
for in-transit merchandise documented on Form 7513.) (1) The state in
which the merchandise actually begins its movement in international trade;
that is, the state in which the merchandise actually starts its journey
to the port of export. For example, a Shipper's Export Declaration covering
merchandise laden aboard a truck at a warehouse in Georgia for transport
to Florida for loading onto a vessel for export to a foreign country shall
show Georgia as the state of origin. This may not be the state where the
merchandise was produced, mined, or grown, or necessarily the state where
the exporter is located. The state designation to be shown shall be the
U.S. Postal Service's standard two-letter state abbreviation.
(2) For shipments of multi-state origin, reported on a single SED, report
state of the commodity of the greatest value or, if such information is
not known at the time of export, the state in which the commodities
are consolidated for export.
(3) For merchandise exported from a U.S. Foreign Trade Zone, the letters
``FTZ'' followed by the Foreign Trade Zone number shall be reported.
(u) Containerized. (Not required for in-transit merchandise documented
on Form 7513.) This information is required to be shown for vessel shipments
only. A containerized shipment is one transported in any size van-type
container such as 8' x 8' x 20' or 8' x 8' x 40'. Cargo originally booked
as containerized cargo as well as that placed in containers at the vessel
operator's option shall be included.
(v) Parties to transaction. (Not required for in-transit merchandise documented
on Form 7513.) An export between related parties is one--
(1) From a U.S. person (U.S. exporter) to a foreign business enterprise
(foreign consignee) in which at anytime during the fiscal year, the U.S.
person owned or controlled, directly or indirectly, 10 percent or more
of the voting securities of the foreign enterprise, if an incorporated
business enterprise; or an equivalent interest, if an unincorporated business
enterprise, including a branch; or
(2) From a U.S. business enterprise (U.S. exporter) to a foreign person
(foreign consignee) that, at anytime during the fiscal year, owned or
controlled, directly or indirectly, 10 percent or more of the voting securities
of the U.S. business enterprise, if an incorporated business enterprise;
or an equivalent interest if an unincorporated business enterprise, including
a branch.
(13 U.S.C. § 302; 5 U.S.C. § 301; Reorganization Plan No. 5
of 1950; Department of Commerce Organization Order No. 35-2 A, Aug. 4,
1975, 40
FR 42765)
[41 FR 9134, Mar. 3, 1976, as amended at 42 FR 59839, Nov. 22, 1977;
43 FR 50675, Oct. 31, 1978; 43 FR 56030, Nov. 30, 1978; 44 FR 1971, Jan.
8, 1979; 45 FR 29567, May 5, 1980; 47 FR 29829, July 9, 1982; 50 FR 23402,
June 4, 1985; 63 FR 41187, Aug. 3, 1998; 64 FR 40976, July 28, 1999; 65
FR 42563, July 10,
2000]
|
|