|
|
All Treesearch publications were written or produced by Forest Service personnel
and are in the public domain. |
|
USDA Forest Service
P.O. Box 96090
Washington, D.C.
20090-6090
(202) 205-8333 |
|
|
All Forest Products Laboratory Pubs
- Fire-retardant-treated strandboard : properties and fire performance (2008)
- An assessment of training needs for the lumber manufacturing industry in the eastern United States (2008)
- ASHRAE Standard 160P--criteria for moisture control design analysis in buildings (2008)
- Role of fungal peroxidases in biological ligninolysis (2008)
- Evidence for cleavage of lignin by a brown rot basidiomycete (2008)
- Transfer of termiticidal dust compounds and their effects on symbiotic protozoa of Reticulitermes flavipes (Kollar) (2008)
- Corrosion of metals in contact with treated wood : developing test methods (2008)
- Enhanced enzymatic hydrolysis of spruce by alkaline pretreatment at low temperature (2008)
- Integrated biomass technologies: future vision for optimally using wood and biomass (2008)
- Withdrawal strength of bright and galvanized annulary threaded nails (2008)
- Some observations of wood density and anatomical properties in a Douglas-fir sample with suppressed growth (2008)
- Preliminary investigation of biological resistance, water absorption and swelling of thermally compressed pine wood panels (2008)
- Improving the color stability of wood-plastic composites through fiber pre-treatment (2008)
- Market impacts of hypothetical fuel treatment thinning programs on federal lands in the western United States (2008)
- Effect of cyclic long-term temperature exposure on the bending strength of lumber (2008)
- Thermochemical remediation of preservative-treated wood (2008)
- Wood-plastic composites using thermomechanical pulp made from oxalic acid-pretreated red pine chips (2008)
- Regional biodeterioration hazards in the United States (2008)
- Small-diameter success stories III. (2008)
- Cantilever-beam dynamic modulus for wood composite products. Part 1, apparatus (2008)
- Evaluating shrinkage of wood propellers in a high-temperature environment (2008)
- Influence of juvenile wood content on shear parallel, compression, and tension transverse to grain strength and mode I fracture toughness for loblolly pine (2008)
- Long-term effects of elevated carbon dioxide on sour orange tree specific gravity and anatomy (2008)
- Material variability and repetitive member allowable property adjustments in forest products engineering (2008)
- A new method of determining moisture gradient in wood (2008)
- Synthesis and evaluation of aminoborates derived from boric acid and diols for protecting wood against fungal and thermal degradation (2008)
- Environmental impact of producing hardwood lumber using life-cycle inventory (2008)
- Comparison of the effects of gamma irradiation and steam sterilization on Southern pine sapwood (2008)
- Synthesis of ethylene maleic anhydride copolymer containing fungicides and evaluation of their effect for wood decay resistance (2008)
- The immediate effect of temperature on the modulus of elasticity of green and dry lumber (2008)
- Ethanol from wood (2008)
- Fiberboard bending properties as a function of density, thickness, resin, and moisture content (2008)
- Periodate and hypobromite modification of Southern pine wood to improve sorption of copper ion (2008)
- Use of fire-impacted trees for oriented strandboards (2008)
- Effects of fiber processing on properties of fiber and fiberboard made from lodgepole pine treetops (2008)
- The influence of juvenile wood content on shear parallel, compression,
and tension perpendicular to grain strength and mode I fracture toughness of loblolly pine at various ring orientation (2008)
- Biological degradation of wood-plastic composites (WPC) and strategies for improving the resistance of WPC against biological decay (2008)
- Validation of laboratory-scale recycling test method of paper PSA label products (2008)
- Optimization of ECF bleaching of kraft pulp. Part 1, Optimal bleaching of hardwood pulps made with different alkali charges (2008)
- Effect of tree-growth rate on papermaking fibre properties (2008)
- Sequestration of carbon in harvested wood products for the United States (2008)
- Theoretical thermal conductivity equation for uniform density wood cells (2008)
- Deterioration of wood from live and dead Alaska yellow-cedar in contact with soil (2007)
- Effect of press-drying on static bending properties of plantation-grown No. 2 loblolly pine lumber (2007)
- Mechanical property loss and the occurrence of wood decay during experimental outdoor aging of wood based panels (2007)
- Measurements of moisture transport in wood-based materials under isothermal and nonisothermal conditions (2007)
- Two-dimensional finite element heat transfer model of softwood. Part III, Effect of moisture content on thermal conductivity (2007)
- Preparation and properties of recycled HDPE/clay hybrids (2007)
- Extracellular oxidative systems of the lignin-degrading Basidiomycete Phanerochaete chrysosporium (2007)
- Influence of nanoclay on properties of HDPE/wood composites (2007)
- Transposon mutagenesis to improve the growth of recombinant Saccharomyces cerevisiae on D-xylose (2007)
- Effect of tree-growth rate on papermaking fiber properties (2007)
- Tensile and thickness swelling properties of strands from Southern hardwoods and Southern pine : effect of hot-pressing and resin application (2007)
- A primer on wood as dock construction material (2007)
- Wood bonding in the furniture industry and the effect of changing wood supply (2007)
- Nanoindentation size effects in wood (2007)
- Development of a bending stiffness model for wet process fiberboard (2007)
- Uncertainties in corrosion rate measurements of fasteners exposed to treated wood at 100% relative humidity (2007)
- Protecting wood from mould, decay, and termites with multi-component biocide systems (2007)
- Moisture performance of a contemporary wood-frame house operated at design indoor humidity levels (2007)
- Vapor-phase diethyl oxalate pretreatment of wood chips. Part 1, Energy savings and improved pulps (2007)
- Characterization of weathered wood-plastic composite surfaces using FTIR spectroscopy, contact angle, and XPS (2007)
- Model for understanding the durability performance of wood adhesives (2007)
- Thermal degradation of wood fibers during hot-pressing of MDF composites. Part I, Relative effects and benefits of thermal exposure (2007)
- Vapor-phase diethyl oxalate pretreatment of wood chips. Part 2, Release of hemicellulosic carbohydrates (2007)
- Wood density and anatomical properties in suppressed-growth trees : comparison of two methods (2007)
- An advancement in removing extraneous color from wood for low-magnification reflected-light image analysis of conifer tree rings (2007)
- Effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.) (2007)
- Considerations in the weathering of wood-plastic composites (2007)
- Structural lumber from suppressed-growth ponderosa pine from northern Arizona (2007)
- Coating WPC's using co-extrusion to improve durability (2007)
- Why good ideas and good science do not always make it into the marketplace (2007)
- Revealing organization of cellulose in wood cell walls by Raman imaging (2007)
- Forest products research and development organizations : organization, governance, and measures of performance in a worldwide setting (2007)
- Higher acid-chlorite reactivity of cell corner middle lamella lignin in black spruce (2007)
- Jute and kenaf (2007)
- Acoustic evaluation of wood quality in standing trees. Part I, Acoustic wave behavior (2007)
- Determining moisture gradient profile using X-Ray technique (2007)
- Pretreatments for converting wood into paper and chemicals (2007)
- U.S. forest products annual market review and prospects, 2004–2008 (2007)
- New method for rapid testing of bond strength for wood adhesives (2007)
- Equivalent circuit modeling of wood at 12% moisture content (2007)
- Dispersion adhesives from soy flour and phenol formaldehyde (2007)
- Use of saltcedar and Utah juniper as fillers in wood–plastic composites (2007)
- Fuels for schools: case study in Darby, Montana (2007)
- U.S. timber production, trade, consumption, and price statistics 1965 to 2005 (2007)
- Environmental effects on the mechanical and thermomechanical properties of aspen fiber–polypropylene composites (2007)
- Reduction of Oxidative Stain in Ochoó (Hura crepitans L.) = Reducción de la Mancha de Oxidación en Ochoó (Hura crepitans L.) (2007)
- ChargeOut! : determining machine and capital equipment charge-out rates using discounted cash-flow analysis (2007)
- Forest products research and development organizations in a worldwide setting: A review of structure, governance, and measures of performance of organizations outside the United States (2007)
- Effects of various fire-retardants on plate shear and five-point flexural shear properties of plywood (2007)
- Preservative treatments for building components (2007)
- Adsorption mechanism of cadmium on juniper bark and wood (2007)
- Chemical modification of wood (2007)
- Structure and transcriptional impact of divergent repetitive elements inserted within Phanerochaete chrysosporium strain RP-78 genes (2007)
- Characterizing wood-plastic composites via data-driven methodologies (2007)
- Direct current testing to measure corrosiveness of wood preservatives (2007)
- Obtaining value prior to pulping with diethyl oxalate and oxalic acid (2007)
- Pelletized ponderosa pine bark for adsorption of toxic heavy metals from water (2007)
- Fire containment in wood construction doesn’t just happen (2007)
- Composite materials from forest biomass : a review of current practices, science, and technology (2007)
- Issues related to durability and protection affecting the acceptance and use of engineered wood composites in Europe (2007)
- Effects of material parameters on the diffusion and sorption properties of wood-flour/polypropylene composites (2007)
- Review of in-service moisture and temperature conditions in wood-frame buildings (2007)
- Antifungal effect of essential oils on southern yellow pine (2007)
- Cone calorimeter tests of wood-based decking materials (2007)
- Globalization and structural change in the U.S. forest sector: an evolving context for sustainable forest management (2007)
- Enhancing composite durability : using thermal treatments (2007)
- Censoring data for resistance factor calculations in load and resistance factor design: a preliminary study (2007)
- Feasibility study for eradication of Reticulitermes flavipes from Endeavor, Wisconsin (2007)
- Arthromyces and Blastosporella, two new genera of conidia-producing lyophylloid agarics (Agaricales, Basidiomycota) from the neotropics (2007)
- Confidence bounds and hypothesis tests for normal distribution coefficients of variation (2007)
- Investigating the use of small-diameter softwood as guardrail posts: static test results (2007)
- The effect of indoor humidity on water vapor release in homes (2007)
- Profile 2007: Softwood sawmills in the United States and Canada (2007)
- Acoustic assessment of stress level and potential wood quality of logs affected by oak decline (2007)
- The genome of an industrial workhorse : sequencing of the filamentous fungus Aspergillus niger offers new opportunities for the production of specialty chemicals and enzymes (2007)
- Feasibility of producing value-added wood products from reclaimed hemlock lumber (2007)
- Seasonal response of feeding, differentiation, and growth in the eastern subterranean termite Reticulitermes flavipes (Kollar) in Wisconsin (2007)
- Long-term effects of elevated carbon dioxide concentration on sour orange wood specific gravity, modulus of elasticity, and microfibril angle (2007)
- Combustion characteristics of north-eastern USA vegetation tested in the cone calorimeter: invasive versus non-invasive plants (2007)
- Tests for Z-direction fiber orientation (2007)
- Shuffling of promoters for multiple genes to optimize xylose fermentation in an engineered Saccharomyces cerevisiae strain (2007)
- Nanotechnology : implications for the wood preservation industry (2007)
- Wood protection by commercial silver formulations against Eastern subterranean termites (2007)
- New insights into the ligninolytic capability of a wood decay ascomycete (2007)
- Complex catalysts from self-repairing ensembles to highly reactive air-based oxidation systems (2007)
- Hexeneuronic acid content of chemical pulp (2007)
- Incorporation of animal manures as reinforcing fillers in high-density polyethylene and high-density polypropylene composites (2007)
- Acoustic assessment of wood quality of raw forest materials : a path to increased profitability (2007)
- Lignin modification in the initial phase of softwood kraft pulp delignification with polyoxometalates (POMs) (2007)
- Polylactide-pine woodflour composites (2007)
- Physical, mechanical, and fire properties of oriented strandboard with fire retardant treated veneers (2007)
- Acoustic tomography for decay detection in red oak trees (2007)
- Determination of microstickies in recycled whitewater by headspace gas chromatography (2007)
- Wood-plastic composites with reduced moisture : effects of chemical modification on durability in the laboratory and field (2007)
- Nanoindentation of the interphase region of a wood-reinforced polypropylene composite (2007)
- Mill demonstration of TMP production from forest thinnings : pulp quality, refining energy, and handsheet properties (2007)
- Possible mechanism for anthraquinone species diffusion in alkaline pulping (2007)
- Chicken feather fiber as an additive in MDF composites (2007)
- Vision of the U.S. biofuel future: a case for hydrogen-enriched biomass gasification (2007)
- Moisture content and the properties of lodgepole pine logs in bending and compression parallel to the grain (2007)
- Estimating Janka hardness from specific gravity for tropical and temperate species (2007)
- Chlorination of lignin by ubiquitous fungi has a likely role in global organochlorine production (2007)
- Surface characterization of weathered wood-plastic composites produced from modified wood flour (2007)
- The effect of initial cell concentration on xylose fermentation by Pichia stipitis (2007)
- Comparison of multiple gene assembly methods for metabolic engineering (2007)
- Forest thinnings : for integrated lumber and paper production (2007)
- Effects of air leakage of residential buildings in mixed and cold climates (2007)
- Durability and mechanical properties of silane cross-linked wood thermoplastic composites (2007)
- Forest Products Laboratory : supporting the nation's armed forces with valuable wood research for 90 years (2007)
- Full-field local displacement analysis of two-sided paperboard (2007)
- Analysis of three-year Wisconsin temperature histories for roof systems using wood, wood-thermoplastic composite, and fiberglass shingles (2007)
- Violet light causes photodegradation of wood beyond the zone affected by ultraviolet radiation (2007)
- Ion exchange of H+, Na+, Mg2+, Ca2+, Mn2+, and Ba2+, on wood pulp (2006)
- Dynamics of phytophagous insects and their pathogens in Alaskan boreal forests (2006)
- High-soy-containing water-durable adhesives (2006)
- Pulp & paper markets cope with high energy prices and growth in Asia : markets for paper, paperboard and woodpulp, 2005-2006 (2006)
- Flammability tests for regulation of building and construction materials (2006)
- Estimating heating times of wood boards, square timbers, and logs in saturated steam by multiple regression (2006)
- Emergency housing systems from three-dimensional engineered fiberboard : temporary building systems for lightweight, portable, easy-to-assemble, reusable, recyclable, and biodegradable structures (2006)
- Using nano- and micro-particles of silver in lignin analysis (2006)
- Effect of acetylated wood flour or coupling agent on moisture, UV, and biological resistance of extruded woodfiber-plastic composites (2006)
- Guidelines for assigning allowable properties to visually graded foreign species based on test data from full sized specimens (2006)
- Two-dimensional finite element heat transfer model of softwood. Part I, Effective thermal conductivity (2006)
- Binderless fiberboard : comparison of fiber from recycled corrugated containers and refined small-diameter whole treetops (2006)
- Flexural properties of structural lumber products after long-term exposure to high temperatures (2006)
- Mineral scale management. Part II, Fundamental chemistry (2006)
- Fire performance of oriented strandboard (2006)
- Using acoustic analysis to presort warp-prone ponderosa pine 2 by 4s before kiln-drying (2006)
- LamLum : a tool for evaluating the financial feasibility of laminated lumber plants (2006)
- Wood (2006)
- Characteristics of the wood adhesion bonding mechanism using hydroxymethyl resorcinol (2006)
- Computational analysis of the Phanerochaete chrysosporium v2.0 genome database and mass spectrometry identiWcation of peptides in ligninolytic cultures reveal complex mixtures of secreted proteins (2006)
- The effect of CaCl2 on growth rate, wood decay and oxalic acid accumulation in Serpula lacrymans and related brown-rot fungi (2006)
- Small-diameter success stories II (2006)
- Mineral scale management Part III, Nonprocess elements in the paper industry (2006)
- The ins and outs of caulking (2006)
- Profile extrusion and mechanical properties of crosslinked wood–thermoplastic composites (2006)
- Study design considerations in evaluating environmental impacts (2006)
- Quantification of metals in preservatively-treated lumber using laser induced breakdown spectroscopy (2006)
- Cornstalk as a source of fiber and energy (2006)
- Forest water contamination (2006)
- Removal of heavy metals from water with forest based materials (2006)
- Janka hardness using nonstandard specimens (2006)
- Froth conductivity for in situ monitoring of fiber (solid) and wet rejects in flotation deinking (2006)
- Detecting and identifying termites in a structure (2006)
- Using ring width correlations to study the effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.) (2006)
- Effects of swelling forces on the durability of wood adhesive bonds (2006)
- Mechanical grading of round timber beams (2006)
- Two-dimensional finite element heat transfer model of softwood. Part II, Macrostructural effects (2006)
- Selected mesostructure properties in loblolly pine from Arkansas plantations (2006)
- Penetration of naphthalene, n-hexadecane, and 2,4-dinitrotoluene into southern yellow pine under conditions modeling spills and floods (2006)
- FE analysis of creep and hygroexpansion response of a corrugated fiberboard to a moisture flow : a transient nonlinear analysis (2006)
- Opportunities for using bio-based fibers for value-added composites (2006)
- Box compression analysis of world-wide data spanning 46 years (2006)
- On measurements of Effective Residual Ink Concentration (ERIC) of deinked papers using Kubelka-Munk theory (2006)
- Thermal load histories for North American roof assembles using various cladding materials including wood-thermoplastic composite shingles (2006)
- Climate in the Great Lakes Region between 14,000 and 4000 years ago from isotopic composition of conifer wood (2006)
- Statistical analysis of influence of soil source on leaching of arsenic and copper from CCA-C treated wood (2006)
- Holistic approach to wood protection (2006)
- Wood structure and adhesive bond strength (2006)
- Can melamine-based wood primers help in understanding bonded wood durability? (2006)
- Corrosion avoidance with new wood preservatives (2006)
- Chemical modification of wood : a short review (2006)
- Lignification in transgenics deficient in 4-coumarate 3-hydroxylase (C3H)or the associated hydroxycinnamoyl transferase (HCT) (2006)
- Electrochemical method for measuring corrosion of metals in wood (2006)
- Sh ble and Cre adapted for functional genomics and metabolic engineering of Pichia stipitis (2006)
- Fastener corrosion : testing, research, and design considerations (2006)
- Effects of pressing schedule on formation of vertical density profile for MDF panels (2006)
- Bioremediation of treated wood with bacteria (2006)
- Bioeconomic and market models (2006)
- A preliminary study of preservative retention and penetration in ACQ-treated timbers using near infrared spectroscopy (2006)
- Effect of various fire retardants on surface roughness of plywood (2006)
- JMFA2—a graphically interactive Java program that fits microfibril angle X-ray diffraction data (2006)
- Modeling and minimization of barium sulfate scale (2006)
- Effect of weathering cycle and manufacturing method on performance of wood flour and high-density polyethylene composites (2006)
- Properties of structural panels fabricated from bioremediated CCA-treated wood: pilot scale (2006)
- Using NIR spectroscopy to predict weathered wood exposure times (2006)
- Analytical modeling of fire growth on fire-resistive wood-based materials with changing conditions (2006)
- Using a quasi-heat-pulse method to determine heat and moisture transfer properties for porous orthotropic wood products or cellular solid materials (2006)
- If the U.S. had Canada's stumpage system (2006)
- Assessment and maintenance of a 15 year old stress-laminated timber bridge (2006)
- Wood preservation (2006)
- Species diversity of polyporoid and corticioid fungi in northern hardwood forests with differing management histories (2006)
- Advances and challenges of wood polymer composites (2006)
- Fungal hydroquinones contribute to brown rot of wood (2006)
- FTM-West : fuel treatment market model for U.S. West (2006)
- Use of lignocellulosic materials as sorbents for pesticide and phosphate residues (2006)
- Raman imaging to investigate ultrastructure and composition of plant cell walls : distribution of lignin and cellulose in black spruce wood (Picea mariana) (2006)
- Development of failure mechanisms for fasteners in the United States (2006)
- Advanced wood- and bio-composites : enhanced performance and sustainability (2006)
- Rapid analysis of abietanes in conifers (2006)
- Fire and bending properties of blockboard with fire retardant treated veneers (2006)
- Selected properties of MDF and flakeboard overlaid with fiberglass mats (2006)
- Column compression strength of tubular packaging forms made from paper (2006)
- Estimating bridge stiffness using a forced-vibration technique for timber bridge health monitoring (2006)
- Advancing cellulose-based nanotechnology (2006)
- Structural condition assessment of in-service wood (2006)
- The top 200! : big production numbers in 2005, such as those posted by the Hampton Affiliates sawmill in Willamina, Ore., may be tamed in 2006 (2006)
- Status and trends : profile of structural panels in the United States and Canada (2006)
- Kraft pulp from budworm-infested jack pine (2006)
- Effects of coumarate 3-hydroxylase down-regulation on lignin structure (2006)
- Properties and grading of Danto and Ramon 2 by 4’s (2006)
- Chemical modification : a non-toxic approach to wood preservation (2006)
- Mineral scale management. Part 1, Case studies (2006)
- The role of oxalic acid in tolerance to N’N-napthaloylhydroxylamine in Tyromyces palustris (2006)
- Natural durability of tropical and native woods against termite damage by Reticulitermes flavipes (Kollar) (2006)
- Nanotechnology applications in the forest products industry (2006)
- Combustion properties of Bromus tectorum L.: influence of ecotype and growth under four CO2 concentrations (2006)
- Durability of wood-plastic composites (2006)
- Moldicidal properties of seven essential oils (2006)
- Early detection and progression of decay in L-joints and lap-joints in a moderate decay hazard zone (2006)
- Thermal energy, electricity, and transportation fuels from wood (2006)
- The use of C-near edge X-ray absorption fine structure spectroscopy for the elaboration of chemistry in lignocellulosics (2006)
- Stress-wave velocity of wood-based panels: effect of moisture, product type, and material direction (2006)
- A multiproxy environmental investigation of Holocene wood from a submerged conifer forest in Lake Huron, USA (2006)
- Invasive forest species (2006)
- Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene (2006)
- Bioremediation of treated wood with fungi (2006)
- Grading timber and glued structural members (2006)
- Pest risk assessment of the importation into the United States of unprocessed Pinus logs and chips from Australia (2006)
- Development of a rapid and simple Agrobacterium tumefaciens mediated transformation system for the fungal pathogen Heterobasidion annosum (2006)
- Fire resistance of structural composite lumber products (2006)
- Preservative-treated wood and alternative products in the Forest Service (2006)
- Structure, organization, and transcriptional regulation of a family of copper radical oxidase genes in the lignin-degrading basidiomycete Phanerochaete chrysosporium (2006)
- If America had Canada’s stumpage system (2006)
- Effect of source, drying method and treatment schedule on treatability of red pine (2006)
- Engineering yeasts for xylose metabolism (2006)
- Principles of minimum cost refining for optimum linerboard strength (2006)
- Lumber processing in selected sawmills in Durango and Oaxaca, Mexico (2006)
- Formosan and native subterranean termite attack of pressure-treated SPF wood species exposed in Louisiana (2006)
- Exposure test of fasteners in preservative-treated wood (2006)
- Evaluation of silvicultural treatments and biomass use for reducing fire hazard in western states (2006)
- Effect of citric acid modification of aspen wood on sorption of copper ion (2006)
- Forest products research and development organizations in a worldwide setting : a review of structure, governance, and measures of performance (2006)
- Influence of photostabilizers on wood flour-HDPE composites exposed to xenon-arc radiation with and without water spray (2006)
- Effect of plantation density on kraft pulp production from red pine (Pinus resinosa Ait.) (2006)
- Small-diameter roundwood, strong-post W-beam guardrail systems (2006)
- Wood construction codes issues in the United States (2006)
- Effects of panel density and mat moisture content on processing medium density fiberboard (2006)
- Acetylation (2006)
- Removal of metal ions from contaminated water using agricultural residues (2006)
- Adhesive bonding of wood treated with ACQ and copper azole preservatives (2006)
- Separation of Dalbergia nigra from Dalbergia spruceana (2006)
- U.S. forest products annual market review and prospects, 2002–2006 (2006)
- Lumen modifications (2005)
- Regulatory and policy issues for reuse and remanufacture of wood materials
coated with lead-based paint (2005)
- Chemical modification : a non-toxic approach to wood preservation (2005)
- Annual patents review, January-December 2004 (2005)
- Tolerance of Serpula lacrymans to copper-based wood preservatives (2005)
- Fundamental chemistry of precipitation and mineral scale formation (2005)
- Low frequency vibration approach for assessing performance of wood floor systems (2005)
- Removal of phosphorus using AMD-treated lignocellulosic material (2005)
- Strength of small-diameter round and tapered bending members (2005)
- Acoustic testing to enhance western forest values and meet customer wood quality needs (2005)
- Two-year Wisconsin thermal loads for roof assemblies and wood, wood–plastic composite, and fiberglass shingles (2005)
- Classical methods and modern analysis for studying fungal diversity (2005)
- Surface characterization (2005)
- Time–temperature superposition principle applied to a kenaf-fiber/high-density polyethylene composite (2005)
- Adhesive bonding and performance testing of bonded wood products (2005)
- Thermal properties (2005)
- Quincy Mine Blacksmith Shop : condition assesment of timbers (2005)
- Unique preservative tolerance in Tyromyces palustris (2005)
- Wood composites (2005)
- X-ray photoelectron spectroscopy for characterization of wood surfaces in adhesion studies (2005)
- Ethanol fermentation on the move (2005)
- Chemical and mechanical aspects of HMR primer in relationship to wood bonding (2005)
- Managing calcium oxalate scale in the bleach plant (2005)
- U.S. hardwood fiber demand and supply situation : globalization and structural change (2005)
- Permanence and diffusion of borax-copper hydroxide remedial preservative applied to unseasoned pine posts : 10 year update (2005)
- Wood and society (2005)
- Stress wave nondestructive evaluation of Douglas-fir peeler cores (2005)
- Comparing energy use and environmental emissions of reinforced wood doors and steel doors (2005)
- Application of fundamental principles to mineral scale reduction : case studies (2005)
- Assessment of increased wet wood bonding for epoxy-bonded samples using a melamine-urea-formaldehyde priming agent (2005)
- Review of test methods used to determine the corrosion rate of metals in contact with treated wood (2005)
- Durable soy-based adhesive dispersions (2005)
- Simulations of flexible fiber suspensions (2005)
- Are epoxy-wood bonds durable enough? (2005)
- The decline and fall of Type II error rates (2005)
- Effects of chemically modified wood on bond durability (2005)
- Sol-Gel deposition of inorganic alkoxides on wood surfaces to enhance their durability under exposure to sunlight and moisture (2005)
- Hampton sets pace for third year : sawmill in Willamina fights off challengers for highest producer (2005)
- Higher demand and production in 2004, but growth wavers in 2005 : markets for paper, paperboard and woodpulp, 2004-2005 (2005)
- Laboratory-and mill-scale study of surfactant spray flotation deinking (2005)
- Structure and function of wood (2005)
- Test method for assessing resistance of pine lumber and waferboard to mold (2005)
- The decline and fall of Type II error rates (2005)
- Effects of a new GUP-B fire retardant on mechanical properties of Korean pine when exposed to elevated temperature (2005)
- Relationship between radial compressive modulus of elasticity and shear modulus of wood (2005)
- Oligocene terrestrial strata of northwestern Ethiopia : a preliminary report on paleoenvironments and paleontology (2005)
- Red and silver maples : resource availability, utilization, and costs (2005)
- Wood products used in the construction of low-rise nonresidential buildings in the United States, 2003 (2005)
- Evaluating weather factors and material response during outdoor exposure to determine accelerated test protocols for predicting service life (2005)
- Azole-based antimycotic agents inhibit mold on unseasoned pine (2005)
- Structural lumber from dense stands of small-diameter Douglas-fir trees. (2005)
- Evaluation and process development of salt cedar and juniper biocomposites as tools to utilize exotic and invasive species and restore native ecosystems (2005)
- The hardwood chip market in 2004 : up in the North/Down in the South : so what's up? (2005)
- Don’t get (sun) burned : exposing exterior wood to the weather prior to painting contributes to finish failure (2005)
- Nanotechnology for forest products. Part 2 (2005)
- Advancing sustainable forestry by using engineered wood or bio-composites (2005)
- A comparison of wood preservatives in posts in southern Mississippi : results from a half-decade of testing (2005)
- Nanotechnology for the forest products industry (2005)
- Recent developments in spectroscopic and chemical characterization of cellulose (2005)
- Earlywood and latewood elastic properties in loblolly pine (2005)
- Stress singularities in a model of a wood disk under sinusoidal pressure (2005)
- Treatability of SPF framing lumber with CCA and borate preservatives (2005)
- The Phanerochaete chrysosporium secretome : database predictions and initial mass spectrometry peptide identifications in cellulose-grown medium (2005)
- Determining the suitability of Lactobacilli antifungal metabolites for inhibiting mould growth (2005)
- I-joists and headers (2005)
- Wood adhesives prepared from lucerne fiber fermentation residues of Ruminococcus albus and Clostridium thermocellum (2005)
- Profile 2005 : softwood sawmills in the United States and Canada (2005)
- Raman imaging of lignin and cellulose distribution in black spruce wood (Picea mariana) cell walls (2005)
- Some recent developments in headspace gas chromatography (2005)
- “Self-absorption” phenomenon in near-infrared Fourier transform Raman spectroscopy of cellulosic and lignocellulosic materials (2005)
- Grading and properties of hardwood structural lumber (2005)
- Method for interconverting drying and heating times between round and square cross sections of ponderosa pine (2005)
- The complex of xylan and iodine: the induction and detection of nanoscale order (2005)
- Durability of structural lumber products after exposure at 82°C and 80% relative humidity (2005)
- Method for quantifying percentage wood failure in block-shear specimens by a laser scanning profilometer (2005)
- Novel visualization studies of lignocellulosic oxidation chemistry by application of C-near edge X-ray absorption fine structure spectroscopy (2005)
- Predicting photoyellowing behaviour of mechanical pulp containing papers (2005)
- Orthophosphate sorption onto lanthanum-treated lignocellulosic sorbents (2005)
- Condition assessment of timber bridges. 2, Evaluation of several stress-wave tools (2005)
- Biological properties (2005)
- Conundrums regarding 5–O–4- linkages in softwood MWLs (2005)
- Development of a powered outdoor sealant fatigue test apparatus (2005)
- Acoustic analysis of warp potential of green ponderosa pine lumber (2005)
- Effect of weathering variables on the lightness of high-density polyethylene woodflour composites (2005)
- The role of the hemicelluloses in the nanobiology of wood cell walls : a systems theoretic perspective (2005)
- The new higher level classification of eukaryotes with emphasis on the taxonomy of protists (2005)
- Treatability of underutilized northeastern species with CCA and alternative wood preservatives (2005)
- Raman spectra of lignin model compounds (2005)
- Design, development, and testing of a hybrid in situ testing device for building joint sealant (2005)
- Physical and mechanical properties and fire, decay, and termite resistance of treated oriented strandboard (2005)
- Detecting decay in wood components (2005)
- Fuel to burn : economics of converting forest thinnings to energy
using BioMax in southern Oregon (2005)
- NIR monitoring of in-service wood structures (2005)
- Long-term efficacy of wood dip-treated with multicomponent biocides (2005)
- Development of flexural vibration inspection techniques to rapidly assess the structural health of timber bridge systems (2005)
- Mechanical properties for a wet-processed fiberboard made from small-diameter lodgepole pine treetop material (2005)
- Nanotechnology for forest products. Part 1 (2005)
- Xylitol production by a Pichia stipitis D-xylulokinase mutant (2005)
- Controlling moisture content of wood samples using a modified soil-pan decay method (2005)
- Review of alternative measures of softwood sawtimber prices in the United States (2005)
- Initial preservative treatment of wood in covered bridges (2005)
- Use of acousto-ultrasonic techniques to determine properties of remanufactured particleboards made solely from recycled particles (2005)
- Acoustic evaluation of standing trees : recent research development (2005)
- Serpula lacrymans, the dry rot fungus and tolerance towards copper-based wood preservatives (2005)
- Sawmill profile : new Forest Products Lab report defines the makeup of North America's softwood sawmill industry (2005)
- Single curved fiber sedimentation under gravity (2005)
- Electron exchange between r-keggin tungstoaluminates and a well-defined cluster-anion probe for studies in electron transfer (2005)
- Heat sterilization times of five hardwood species (2005)
- Geometric model for softwood transverse thermal conductivity. Part I (2005)
- Processive endoglucanase active in crystalline cellulose hydrolysis by the brown rot Basidiomycete Gloeophyllum trabeum (2005)
- Wood products used in new residential construction in the U.S. and Canada, 2003 : with comparisons to 1998 and 1995 (2005)
- Structural changes of residual lignin of softwood and hardwood kraft pulp upon oxidative treatment with polyoxometalates (2005)
- Wood adhesion and adhesives (2005)
- Nondestructive assessment of single-span timber bridges using a vibration- based method (2005)
- Evaluation of forest thinning materials for TMP production (2005)
- Remilling of salvaged wood siding coated with lead-based paint. Part 1, Lead exposure (2005)
- Remilling of salvaged wood siding coated with lead-based paint. Part 2, Wood product yield (2005)
- Dynamic drainage of froth with wood fibers (2005)
- Environmental concentrations of copper, chromium, and arsenic released from a chromated-copper-arsenate-(CCA-C-) treated wetland boardwalk (2005)
- Condition assessment of timber bridges. 1, Evaluation of a micro-drilling resistance tool (2005)
- Moisture properties (2005)
- Improved utilization of small-diameter ponderosa pine in glulam timber (2005)
- Designated fiber stress for wood poles (2005)
- Cell wall chemistry (2005)
- Resistance of borax–copper treated wood in aboveground exposure to attack by Formosan subterranean termites (2005)
- Weathering of wood (2005)
- Opportunity and development of bio-based composites (2005)
- Development of new microwave-drying and straightening technology for low-value curved timber (2005)
- Comparison of fiber length analyzers (2005)
- Relationship of host recurrence in fungi to rates of tropical leaf decomposition (2005)
- Wood fueled boiler financial feasibility user's manual (2005)
- Deinking selectivity (Z-factor) : a new parameter to evaluate the performance of flotation deinking process (2005)
- Defining the rift : U.S. economist examines the consequences of the differences in U.S. and Canadian stumpage valuations (2005)
- Time- and cost-saving apparatus for analytical sample filtration (2005)
- The use of electrochemical impedance spectroscopy (EIS) to measure the corrosion of metals in contact with wood (2005)
- Performance of finishes on western juniper lumber and particleboard during outdoor exposure (2005)
- Nondestructive assessment of timber bridges using a vibration-based method (2005)
- On fiber rejection loss in flotation deinking (2005)
- Phanerochaete chrysosporium genomics (2005)
- The nop gene from Phanerochaete chrysosporium encodes a peroxidase with novel structural features (2005)
- Nanotechnology for the forest products industry: vision and technology roadmap (2005)
- Use of digital image correlation to study the local deformation field of paper and paperboard (2005)
- Tensile and dimensional properties of wood strands made from plantation southern pine lumber (2005)
- Copper tolerance of brown-rot fungi : oxalic acid production in southern pine treated with arsenic-free preservatives (2005)
- Examination of adhesive penetration in modified wood using fluorescence microscopy (2005)
- Creosote movement from treated wood immersed in fresh water (2005)
- Effects of diterpene acids on components of a conifer bark beetle-fungal interaction : tolerance by Ips pini and sensitivity by its associate Ophiostoma ips (2005)
- Monitoring liquid and solid content in froth using conductivity (2005)
- Drainage and fractionation of wood fibers in a flotation froth (2005)
- Evaluation of a reduced section modulus model for determining effects of incising on bending strength and stiffness of structural lumber (2005)
- Microwave drying of wood strands (2005)
- Hardwoods for timber bridges : a national program emphasis by the USDA Forest Service (2005)
- Neotropical Ascomycetes. 13, Cornipulvina and Erythromada, two new genera from the Caribbean and elsewhere (2005)
- Achieving resource sustainability and enhancing economic development through biomass utilization (2005)
- The hardwood chip market in 2005 (2005)
- Chemical modification of wood (2005)
- Chemistry of wood strength (2005)
- Using wood composites as a tool for sustainable forestry (2005)
- Carbon starvation in glacial trees recovered from the La Brea tar pits, southern California (2005)
- Cadmium ion sorption onto lignocellulosic biosorbent modified by sulfonation : the origin of sorption capacity improvement (2005)
- Nondestructive evaluation of incipient decay in hardwood logs (2005)
- Mechanical grading of 6-inch-diameter lodgepole pine logs for the travelers’ rest and rattlesnake creek bridges (2005)
- Good vital signs : the economy as it pertains to the lumber industry remains healthy, but the flu is always lurking (2005)
- Fiber webs (2005)
- Brasiliocroton : a new crotonoid genus of Euphorbiaceae s.s. from eastern Brazil (2005)
- Comparison study of thickness swell performance of commercial oriented strandboard flooring products (2005)
- U.S. forest products annual market review and prospects, 2001–2005. (2005)
- Natural fibers (2005)
- Studies of lignin transformation in polyoxometalate (POM) bleaching of kraft pulp (2005)
- NDE of logs and standing trees using new acoustic tools : technical application and results (2005)
- Strandboard made from soy-based adhesive with high soy content (2005)
- Changes in wood flour/HDPE composites after accelerated weathering with and without water spray (2005)
- Feasibility of using building deconstruction at Wisconsin’s Badger Army Ammunition Plant : salvaging lumber for reuse in low-income home construction (2005)
- Analysis of soy flour/phenol-formaldehyde adhesives for bonding wood (2005)
- Kings Covered Bridge rehabilitation, Somerset County, PA (2005)
- Wood flour (2005)
- Finite element analyses of wood laminated composite poles (2005)
- Use of the cone calorimeter to detect seasonal differences in selected combustion characteristics of ornamental vegetation (2005)
- ICT and the paperboard and packaging industry (2005)
- Utility of Horioka’s and Marra’s models for adhesive failure (2005)
- Wood thermoplastic composites (2005)
- Wood inhabiting fungi in Alaska : their diversity, roles, and uses (2005)
- Nanotechnology opportunities in residential and non-residential construction (2005)
- Relationship between stress wave velocities of green and dry veneer (2004)
- Chemical mechanism of fire retardance of boric acid on wood (2004)
- Improved grading system for structural logs for log homes (2004)
- Correlation of adhesive strength with service life of paint applied to weathered wood (2004)
- Recommended protocols for sampling macrofungi (2004)
- A biopulping mechanism : creation of acid groups on fiber (2004)
- Phosphate adsorption on aluminum-impregnated mesoporous silicates : surface structure and behavior of adsorbents (2004)
- Polyoxometalate oxidation of non-phenolic lignin subunits in water : effect of substrate structure on reaction kinetics (2004)
- Estimating air-drying times of small-diameter ponderosa pine and Douglas-fir logs (2004)
- Fundamentals of composite processing : proceedings of a workshop : November 5-6, 2003, Madison, WI. (2004)
- A method countries can use to estimate changes in carbon stored in harvested wood products and the uncertainty of such estimates (2004)
- Solution chemistry effects on orthophosphate adsorption by cationized solid wood residues (2004)
- Finishes checklist : a guide to achieving optimum coating performance on exterior wood surfaces (2004)
- Treated wood in transition : a look at CCA and the candidates to replace it (2004)
- Tree-ring records of near-Younger Dryas time in central North America : preliminary results from the Lincoln Quarry site, central Illinois, USA (2004)
- Genome sequence of the lignocellulose degrading fungus Phanerochaete chrysosporium strain RP78 (2004)
- Stress wave sorting of red maple logs for structural quality (2004)
- Converting among log scaling methods : Scriber, International, and Doyle versus cubic (2004)
- Competitive soybean flour/phenol-formaldehyde adhesives for oriented strandboard (2004)
- Specific adhesion model for bonding hot-melt polyamides to vinyl (2004)
- Electron transfer from alpha-keggin anions to dioxygen (2004)
- Hampton Mill maintains title : top twelve producer mills are in Northwest (2004)
- Three-dimensional engineered fiberboard : opportunities for the use of low valued timber and recycled material (2004)
- The challenge of bonding treated wood (2004)
- FT–Raman investigation of bleaching of spruce thermomechanical pulp (2004)
- 3D engineered fiberboard : finite element analysis of a new building product (2004)
- An empirical analysis of an innovative application for an underutilized resource: small-diameter roundwood in recreational buildings (2004)
- Handsheet formation and mechanical testing via fiber-level simulations (2004)
- The compression of wood/thermoplastic fiber mats during consolidation (2004)
- Improved water resistance of bio-based adhesives for wood bonding (2004)
- Fiber resources (2004)
- Potential sources of variation that influence the final moisture content of kiln-dried hardwood lumber (2004)
- Chemical modification (2004)
- Approaches to sampling macrofungi (2004)
- Effects of inorganic ions on leachability of wood preserving N'N-hydroxynapthalimide (NHA). (2004)
- Rate of CCA leaching from commercially treated decking. (2004)
- ASTM Committee D-7 : Wood : promoting safety and standardization for 100 years (2004)
- Improving the two-step remediation process for CCA-treated wood. Part II, Evaluating bacterial nutrient sources (2004)
- Estimating air drying times of lumber with multiple regression (2004)
- Metabolic engineering for improved fermentation of pentoses by yeasts (2004)
- Micrandra inundata (Euphorbiaceae), a new species with unusual wood
anatomy from black-water river banks in southern Venezuela (2004)
- Development of test apparatus for service life prediction of sealant formulations and evaluation of data from 18 months of outdoor weathering (2004)
- Variability in evaluating environmental impacts of treated wood. (2004)
- Modeling of bleach plant washer mineral scale (2004)
- Ignitability of materials in transitional heating regimes (2004)
- Micro and colloidal stickie pacification with precipitated calcium carbonate (2004)
- Fire resistance of exposed wood members (2004)
- Profiling of oligolignols reveals monolignol coupling conditions in lignifying poplar xylem (2004)
- Effects of backing board materials on wood combustion performance (2004)
- An investigation into the potential of ionic silver as a wood preservative (2004)
- Assessment of decay in standing timber using stress wave timing nondestructive evaluation tools : a guide for use and interpretation (2004)
- Improving playground surface accessibility (2004)
- Small-diameter success stories (2004)
- Woody residues and solid waste wood available for recovery in the United States, 2002 (2004)
- Differential stress-induced regulation of two quinone reductases in the brown rot Basidiomycete Gloeophyllum trabeum (2004)
- Fungal decay resistance of wood reacted with phosphorus pentoxide-amine system (2004)
- Characterization of a multicopper oxidase gene cluster in Phanerochaete chrysosporium and evidence of altered splicing of the mco transcripts (2004)
- Curbing indoor mold growth with mold inhibitors (2004)
- Design of a hydraulic bending machine (2004)
- Improvement of cadmium ion removal by base treatment of juniper fiber (2004)
- U.S. forest products annual market review and prospects, 2001-2004 (2004)
- Considerations in recycling of wood-plastic composites (2004)
- Evaluating the warping of laminated particleboard panels (2004)
- Roles of surfactants in flotation deinking (2004)
- Polycyclic aromatic hydrocarbon migration from creosote-treated railway ties into ballast and adjacent wetlands (2004)
- Surface chemistry and mechanical property changes of wood-flour/high-density-polyethylene composites after accelerated weathering (2004)
- Alternatives to chromated copper arsenate for residential construction (2004)
- Attic and crawlspace ventilation : implications for homes located in the urban-wildland interface (2004)
- Effects of processing method and moisture history on laboratory fungal resistance of wood-HDPE composites. (2004)
- Evaluation of small-diameter ponderosa pine logs in bending (2004)
- Fiberboards treated with N’-N-(1, 8-Naphthalyl) hydroxylamine (NHA-Na), borax, and boric acid (2004)
- Finite element analyses of two dimensional, anisotropic heat transfer in wood (2004)
- Saccharomyces cerevisiae engineered for xylose metabolism exhibits a respiratory response (2004)
- Recent trends in preservative treatments for timber bridges (2004)
- Isolation and purification of pyranose 2-oxidase from Phanerochaete chrysosporium and characterization of gene structure and regulation (2004)
- Log sort yard economics, planning, and feasibility (2004)
- Phosphate-bonded ceramic–wood composites : R&D project overview and invitation to participate (2004)
- New technology in pulping and bleaching (2004)
- Mycena sect. Hygrocyboideae in the mountains of the Dominican Republic (2004)
- Stoichiometric network constraints on xylose metabolism by recombinant Saccharomyces cerevisiae (2004)
- Inventories of woody residues and solid wood waste in the United States, 2002 (2004)
- 3D structural panels : a literature review (2004)
- Timber rivet connections in US domestic species (2004)
- Evaluation of coupling agents to manufacture hybrid hardboard made from industrial waste fiberglass and wood fiber (2004)
- Optimizing lodgepole pine submerchantable log thermomechanical pulp (2004)
- Chemical, physical and biological factors affecting wood decomposition in forest soils (2004)
- Two-dimensional heat flow analysis applied to heat sterilization of ponderosa pine and Douglas-fir square timbers (2004)
- Deinking selectivity (Z-factor) : a new parameter to evaluate the performance of flotation deinking process (2004)
- Surface chemistry changes of weathered HDPE/wood-flour composites studied by XPS and FTIR spectroscopy (2004)
- Dynamic mechanical analysis of compatibilizer effect on the mechanical properties of wood flour/high-density polyethylene composites (2004)
- Diameter effect on stress-wave evaluation of modulus of elasticity of logs (2004)
- Field performance of stress-laminated highway bridges constructed with glued laminated timber (2004)
- Summer temperatures of roof assemblies using western redcedar, wood-thermoplastic composite, or fiberglass shingles (2004)
- Light-induced yellowing of selectively 13C-enriched dehydrogenation polymers (DHPs). Part 2, NMR assignments and photoyellowing of aromatic ring 1-, 3-, 4-, and 5-13C DHPs (2004)
- Variability in evaluating environmental impacts of treated wood. (2004)
- Influence of board density, mat construction, and chip type on performance of particleboard made from eastern redcedar (2004)
- Bonding of wood fiber composites using a synthetic chelator-lignin activation system (2004)
- Cationized milled pine bark as an adsorbent for orthophosphate anions (2004)
- Controlling adhesive behavior during recycling (2004)
- Energy from wood (2004)
- Water decontamination (2004)
- Cone calorimeter evaluation of wood products (2004)
- Crystallization behavior of polyamide-6 microcellular nanocomposites (2004)
- Riding the crest of the wave : sawn softwood markets in 2003-2004 (2004)
- Multicomponent biocide systems protect wood from decay fungi, mold fungi, and termites for interior applications (2004)
- Pennsylvania hardwood timber bridges : field performance after 10 years (2004)
- Evaluating the natural durability of native and tropical wood species against Reticulitermes flavipes (2004)
- Accelerated weathering of natural fiber-filled polyethylene composites (2004)
- Rapid analysis of the chemical composition of agricultural fibers using near infrared spectroscopy and pyrolysis molecular beam mass spectrometry (2004)
- Growth and fermentation responses of Phanerochaete chrysosporium to O2 limitation (2004)
- Messenger RNA transcripts (2004)
- Antifungal metabolites of lactobacilli (2004)
- Recovering wood for reuse and recycling : a United States perspective (2004)
- The operating regime in mechanical pulps--the significance of fiber failure (2004)
- Yield and ultrasonic modulus of elasticity of red maple veneer (2004)
- Collecting and describing macrofungi (2004)
- Heat sterilization times of red pine boards (2004)
- Improving the two-step remediation process for CCA-treated wood. Part I, Evaluating oxalic acid extraction (2004)
- Durability of hardboard siding (2004)
- Scaled-up remediation of CCA-treated wood (2004)
- Macrofungi on woody substrata (2004)
- Study of injection molded microcellular polyamide-6 nanocomposites (2004)
- Effects of moisture on aspen-fiber/polypropylene composites (2004)
- Enzymology and molecular biology of lignin degradation (2004)
- Removal of heavy metal ions from aqueous solutions using lignocellulosic fibers (2004)
- Effect of processing method on surface and weathering characteristics of wood-flour/HDPE composites (2004)
- Processing of fibre suspensions at ultra-high consistencies (2004)
- Long-term performance monitoring of hardwood timber bridges in Pennsylvania (2004)
- Consumption climbs in central and eastern countries, stagnates in the west : markets for paper, paperboard and woodpulp, 2003-2004 (2004)
- Effects of uneven-aged and diameter-limit management on West Virginia tree and wood quality (2004)
- Synthesis and evaluation of borates derived from boric acid and diols for the protection of wood against fungal decay and thermal degradation (2004)
- Adhesive interactions with wood (2004)
- Bioremediation and degradation of CCA-treated wood waste. (2004)
- Latest advancements in the acetylation of wood fibers to improve performance of wood composites (2004)
- The application of near infrared (NIR) spectroscopy to inorganic preservative-treated wood (2004)
- Diagnostic guide for evaluating surface distortions in veneered furniture and cabinetry (2004)
- State-of-the-art methods for testing materials outdoors (2004)
- Clear exterior finishes : finding the balance between aesthetics and durability (2004)
- Thermal properties of wood reacted with a phosphorus pentoxide–amine system (2004)
- Conversion of conifer wastes into edible and medicinal mushrooms. (2004)
- Mycoblitz : beating the weather (2004)
- Light-induced yellowing of selectively 13C-enriched dehydrogenation polymers (DHPs). Part 1, Side-chain 13C-enriched DHP ([alpha], [beta], and [gamma]-13C) (2004)
- Alternatives to chromated copper arsenate (CCA) for residential construction. (2004)
- Understanding properties of commercial OSB products (2004)
- Durability of yellow-poplar and sweetgum and service life of finishes after long-term exposure (2004)
- A new mechanism of biopulping : attachment of acid groups on fiber (2004)
- Hygrophoraceae (Agaricales) of the Greater Antilles : Hygrocybe subgenus Pseudohygrocybe sections Coccineae and Neohygrocybe (2004)
- Laccase modification of the physical properties of bark and pulp of loblolly pine and spruce pulp (2004)
- Effects of size and age on the survival and growth of pulp and paper mills (2004)
- Two dimensional finite element heat transfer models for softwood (2004)
- Development of unbonded and bonded areas in relation to Populus species wood characteristics in grinding (2004)
- Directory of wood-framed building deconstruction and reused wood building materials companies, 2004 (2004)
- Review of end grain nail withdrawal research (2004)
- Use of wood energy for lumber drying and community heating in southeast Alaska (2004)
- Lignins : natural polymers from oxidative coupling of 4-hydroxyphenyl-propanoids (2004)
- Biodiversity of wood-inhabiting fungi in Israeli pine forests (2004)
- Timber rivets in structural composite lumber (2004)
- Composite panels made with biofiber or office wastepaper bonded with thermoplastic and/or thermosetting resin (2004)
- Water removal of wet veneer by roller pressing (2004)
- Estimating the board foot to cubic foot ratio (2004)
- Effect of drying temperature on warp and downgrade of 2 by 4's from small-diameter ponderosa pine (2004)
- Efficacy of didecyl dimethyl ammonium chloride (DDAC), disodium octaborate tetrahydrate (DOT), and chlorothalonil (CTL) against common mold fungi (2004)
- Long-term soil accumulation of chromium, copper, and arsenic adjacent to preservative-treated wood. (2004)
- Diameter effect on stress-wave evaluation of modulus of elasticity of logs (2003)
- Mechanism of cadmium ion removal by base treated juniper fiber (2003)
- A strategic assessment of forest biomass and fuel reduction treatments in western states (2003)
- Evaluating wood-based composites for incipient fungal decay with the immunodiagnostic wood decay test. (2003)
- Formosan subterranean termite resistance to heat treatment of Scots pine and Norway spruce (2003)
- Concepts in the development of new accelerated test methods for wood decay (2003)
- FT-Raman study of dehydrogenation polymer (DHP) lignins (2003)
- Fire resistance of engineered wood rim board products. (2003)
- Effect of weathering on chromated copper arsenate (CCA) treated wood : leaching of metal salts and change in water repellency (2003)
- Migration of iron and manganese into CCA-treated wood in soil contact and the resulting error in leaching results when using energy dispersive x-ray fluorescence spectrometers (2003)
- Comparison of microstickies measurement methods. Part I, sample preparation and measurement methods (2003)
- Estimating air drying times of small-diameter ponderosa pine and Douglas-fir logs. (2003)
- Spectroscopic determination of anthraquinone in kraft pulping liquors using a membrane interface (2003)
- Dimerization of A-[alpha]-[SiNb3W9O40]7- by pH-controlled formation of individual Nb−µ-O−Nb linkages (2003)
- In situ quantitation of ring-conjugated ethylenic lignin-units in spruce thermomechanical pulps by FT-Raman spectroscopy (2003)
- Velcro mechanics in wood (2003)
- Application of laboratory fungal resistance tests to solid wood and wood-plastic composite (2003)
- FPL-PELPS : a price endogenous linear programming system for economic modeling, supplement to PELPS III, version 1.1. (2003)
- Bacteria engineered for fuel ethanol production: current status (2003)
- Characterization and reactions of a Salix extractive with a unique ring system (2003)
- Hybrid composites : combining cellulose fibers and wollastonite mineral fibers into a nylon 6 matrix (2003)
- Small-diameter trees used for chemithermomechanical pulps. (2003)
- Analysis of three microscopic characters for separating the wood of Pinus contorta and P. ponderosa (2003)
- Accelerated weathering of wood surfaces coated with multifunctional allkoxysilanes by sol-gel deposition (2003)
- Raman microprobe analysis of single ramie fiber during mercerization (2003)
- Structural wood products in onshore buildings at Naval Station Norfolk, 2000. (2003)
- New species of Psilocybe in the Caribbean, with an emendation of P. guilartensis (2003)
- Confidence intervals for predicting lumber strength properties based on ratios of percentiles from two Weibull populations. (2003)
- Solid residues from Ruminococcus cellulose fermentations as components of wood adhesive formulations (2003)
- Modification of lignocellulosic materials by laccase (2003)
- Taking inventory of woody residuals (2003)
- Improvements to hydroxymethylated resorcinol coupling agent for durable bonding to wood (2003)
- Treated wood in transition : a look at CCA and the candidates to replace it (2003)
- Utilization of treated conifer wood chips by Pleurotus (Fr.) P. Karst. species for cultivating mushrooms (2003)
- Extending service life of timber bridges with preservatives (2003)
- Pest risk assessment of the importation into the United States of unprocessed logs and chips of eighteen Eucalypt species from Australia. (2003)
- Ultraviolet weathering of photostabilized wood-flour-filled high-density polyethylene composites (2003)
- Developing and commercializing sustainable new wood products : a process for identifying viable products. (2003)
- Determination of transverse elastic constants of wood using a cylindrically orthotropic model (2003)
- Oligocene mammals from Ethiopia and faunal exchange between Afro-Arabia and Eurasia (2003)
- Hampton at Willamina is #1 : Seneca, Weyerhaeuser mills follow (2003)
- Analysis of D-glucose metabolism of wood decay fungi using 13C-NMR and 13C-labeled substrates (2003)
- Identification of phanerosporic acid in birch degraded by Phanerochaete chrysosporium (2003)
- New taxa of Hawaiian corticioid fungi are described with keys to Crustoderma, Radulomyces, and Scopuloides (2003)
- Evaluation of small-diameter timber for value-added manufacturing : a stress wave approach (2003)
- An evaluation of the use of near infrared (NIR) spectroscopy to identify water and oil-borne preservatives (2003)
- Harvested wood products : basis for future methodological development (2003)
- Oxalic acid pretreatment for mechanical pulping greatly improves paper strength while maintaining scattering power and reducing shives and triglycerides (2003)
- Mold inhibition on unseasoned southern pine (2003)
- Commercialization of biopulping: an energy-saving and environmentally-friendly technology for the paper industry (2003)
- Gas chromatographic determination of 1.8-naphthalimide, N-hydroxy-1.8- naphthalimide (N,N-naphthaloylhydroxylamine) and the sodium salt of N-hydroxy-1.8-naphthalimide (2003)
- Tequila, slaughterhouse wastes and composting (2003)
- Surface chemistry and moisture sorption properties of wood coated with multifunctional alkoxysilanes by sol-gel process (2003)
- Powder-driven-nail connections for round timber (2003)
- Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites (2003)
- Use of Excel ion exchange equilibrium solver with WinGEMS to model and predict NPE distribution in the Mead/Westvaco Evandale, TX, hardwood bleach plant (2003)
- Pulp capacity in the United States, 2000. (2003)
- Leachability of boron from wood treated with natural and semi-synthetic polymers and calcium precipitating agent (2003)
- Sinapate dehydrodimers and sinapate−ferulate heterodimers in cereal dietary fiber (2003)
- A novel extracellular multicopper oxidase from Phanerochaete chrysosporium with ferroxidase activity (2003)
- Screw withdrawal : a means to evaluate densities of in-situ wood members (2003)
- Accelerated detection of brown-rot decay : comparison of soil block test, chemical analysis, mechanical properties, and immunodetection (2003)
- Rapid 2,2'-bicinchoninic-based xylanase assay compatible with high throughput screening (2003)
- Decay and termite resistance of medium density fiberboard (MDF) made from different wood species (2003)
- Bilinear modelling of cellulosic orthotropic nonlinear materials (2003)
- Phellinus coronadensis : a new species from southern Arizona, USA (2003)
- Durability of structural lumber products at high temperatures. Part I, 66C at 75% RH and 82C at 30% RH (2003)
- Using kinetic models to predict thermal degradation of fire-retardant-treated plywood roof sheathing (2003)
- 3D engineered fiberboard : engineering analysis of a new building product (2003)
- Enhancement of cadmium ion sorption capacity of lignocellulosic bio-sorbent by sulfonation (2003)
- A numerical simulation on the flow of watershed filtration reactors using lignocellulosic materials (2003)
- An improved 13C-tracer method for the study of lignin structure and reactions : differential 13C-NMR (2003)
- Kinetic analysis of polyoxometalate (POM) oxidation of non-phenolic lignin model compound (2003)
- Aging of printing and writing paper upon exposure to light. Part 2, Mechanical and chemical properties (2003)
- Applications of nanocomposites and woodfiber plastics for microcellular injection molding (2003)
- Removal of phosphorus using chemically modified lignocellulosic materials (2003)
- Challenges in converting among log scaling methods. (2003)
- Combined ultraviolet and water exposure as a preconditioning method in laboratory fungal durability testing (2003)
- Effect of processing method on accelerated weathering of wood-flour/HDPE composites (2003)
- Response of corrugated fiberboard to moisture flow : a 3-D finite element transient nonlinear analysis (2003)
- Impact toughness of cellulose-fiber reinforced polypropylene : influence of microstructure in laminates and injection molded composites (2003)
- Influence of natural fibers on the phase transitions in high-density polyethylene composites using dynamic mechanical analysis (2003)
- Mechanical properties of wood fiber composites under the influence of temperature and humidity (2003)
- Field performance testing of improved engineered wood fiber surfaces for accessible playground areas (2003)
- Profile 2003: softwood sawmills in the United States and Canada (2003)
- Urban tree and woody yard residues : another wood resource (2003)
- Detecting decay fungi with antibody-based tests and immunoassays (2003)
- Synchrotron applications in wood preservation and deterioration (2003)
- New environmentally-benign concepts in wood protection: the combination of organic biocides and non-biocidal additives (2003)
- Determination of carboxyl groups in wood fibers by headspace gas chromatography (2003)
- Reusing remediated CCA-treated wood (2003)
- Electrochemical delignification of wood pulp using polyoxometalate mediators (2003)
- Bending strength of Chilean radiata pine poles (2003)
- Oxalic acid overproduction by copper-tolerant brown-rot basidiomycetes on southern yellow pine treated with copper-based preservatives (2003)
- Copper tolerance of brown-rot fungi : time course of oxalic acid production (2003)
- Use of modified pine bark for removal of pesticides from stormwater runoff (2003)
- Wood preservation (2003)
- Dynamic characteristics of timber bridges as a measure of structural integrity (2003)
- Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part I, Testing of Douglas-fir plywood per ASTM Standard D 5516-96 (2003)
- Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part II, Testing of small clear specimens per ASTM Standard D 5664-95, Methods A and B (2003)
- Effect of drilled holes on the bending strength of large dimension Douglas-fir lumber (2003)
- Improving engineered wood fiber surfaces for accessible playgrounds. (2003)
- Basic studies on the pyrolysis of lignin compounds (2003)
- Interaction of copper wood preservatives and adhesives (2003)
- Semiannual patents review July 2002–December 2002 (2003)
- Chlorination and cleavage of lignin structures by fungal chloroperoxidases (2003)
- Understanding wood chemistry changes during biopulping (2003)
- Heat sterilization time of ponderosa pine and Douglas-fir boards and square timbers (2003)
- Comparison of macrostickies measurement methods (2003)
- Mechanical properties of gypsum board at elevated temperatures (2003)
- Effect of simulated rainfall and weathering on release of preservative elements from CCA treated wood (2003)
- Evaluation of a boron-nitrogen, phosphate-free fire-retardant treatment. Part III, Evaluation of full-size 2 by 4 lumber per ASTM Standard D 5664-95 Method C (2003)
- Synthesis of pulping processes with fiber loading methods for lightweight papers (2003)
- Mechanisms responsible for the effect of wet bulb depression on heat sterilization of slash pine lumber (2003)
- Molecular characterization of a gene for aldose reductase (CbXYL1) from Candida boidinii and its expression in Saccharomyces cerevisiae (2003)
- Changing flux of xylose metabolites by altering expression of xylose reductase and xylitol dehydrogenase in recombinant Saccharomyces cerevisiae (2003)
- Enzyme processes for pulp and paper : a review of recent developments (2003)
- Durable wood bonding with epoxy adhesives (2003)
- Applications of polyamide/cellulose fiber/wollastonite composites for microcellular injection molding (2003)
- NMR analysis of lignins in CAD-deficient plants. Part 1, Incorporation of hydroxycinnamaldehydes and hydroxybenzaldehydes into lignins (2003)
- Characteristics of ten tropical hardwoods from certified forests in Bolivia. Part II, Natural durability to decay fungi (2003)
- Finite element corroboration of buckling phenomena observed in corrugated boxes (2003)
- Heterologous expression of laccase cDNA from Ceriporiopsis subvermispora yields copper-activated apoprotein and complex isoform patterns (2003)
- Microcellular nanocomposite injection molding process (2003)
- Effect of low relative humidity on properties of structural lumber products (2003)
- Analysis of wood cantilever loaded at free end (2003)
- Accidental mold/termite testing of high density fiberboard (HDF) treated with borates and N’N-naphthaloylhydroxylamine (NHA) (2003)
- FT-Raman spectra of cellulose and lignocellulose materials : “self-absorption” phenomenon and its implications for quantitative work (2003)
- Pleistocene plant fossils in and near La Selva Biological Station, Costa Rica (2003)
- Potential of chicken feather fibre in wood MDF composites (2003)
- Progress in the development and optimization of polyoxometalate delignification systems (2003)
- Lam I-joists : a new structural building product from small-diameter, fire-prone timber (2003)
- Genetics and genomics in bioenergy and bioproducts (2003)
- Confidence bounds for normal and lognormal distribution coefficients of variation (2003)
- Flexural properties of laminated veneer lumber manufactured from ultrasonically rated red maple veneer : a pilot study. (2003)
- Creosote retention levels of timber highway bridge superstructures in Michigan’s Lower Peninsula. (2003)
- Long-term stake evaluations of waterborne copper systems (2003)
- Oxidation catalysis by polyoxometalates fundamental electron-transfer phenomena (2002 )
- Development and application of colorimetric microassay for determining boron-containing compounds (2002 )
- Wood-framed building deconstruction : a source of lumber for construction? (2002)
- Using wood-based structural products as forest management tools to improve forest health, sustainability and reduce forest fuels : a research program of the USDA Forest Service under the National Fire Plan (2002)
- Projections of shifts in US Forest Products produced, imported, and exported and sources of roundwood and other fiber used to make them. (2002)
- Molecular genetics of lignin-degrading fungi and their applications in organopollutant degradation (2002)
- Pilot study to examine use of transverse vibration nondestructive evaluation for assessing floor systems (2002)
- Merging weather data with materials response data during outdoor exposure (2002)
- Modification of wood fiber using steam (2002)
- Resupinate fungi (Basidiomycetes, Aphyllophoraies) of Macquarie Island, Australia (2002)
- Wood anatomy of the Brazilian species of Swartizia and considerations within the tribe Swartzieae (2002)
- Wood-framed building deconstruction : a source of lumber for construction? (2002)
- High fiber-low matrix composites: kenaf fiber/polypropylene. (2002)
- U.S. fiber supply : steady and secure (2002)
- Stability and structure in [alpha]- and [beta]-keggin heteropolytungstates,
[Xn+W12O40](8-n)-, X = p-block cation (2002)
- Durability of wood/plastic composites made from Parthenium species (2002)
- Home wreckers in search of moisture (2002)
- Land use history, environment, and tree composition in a tropical forest (2002)
- A comparative study of wood highway sound barriers (2002)
- Characterization of wood decay enzymes by MALDI-MS for post-translational modification and gene identification. (2002)
- Comparisons of interlaboratory swellometer testing of two water-repellent preservative formulations for millwork (2002)
- Predictor sort sampling and one-sided confidence bounds on quantiles (2002)
- Moisture diffusion through a corrugated fiberboard under compressive loading : its deformation and stiffness response (2002)
- Transverse vibration technique to identify deteriorated wood floor systems (2002)
- Significant levels of extracellular reactive oxygen species produced by brown rot basidiomycetes on cellulose (2002)
- Micromechanical measurement of wood substructure properties. (2002)
- Effect of wet-dry cycling on the decay properties of aspen fiber high-density polypropylene composites. (2002)
- Nondestructive evaluation of oriented strand board exposed to decay fungi. (2002)
- Basidiomycetes of the Greater Antilles project (2002)
- Molecular characterization of the Hansenula polymorpha FLD1 gene encoding formaldehyde dehydrogenase. (2002)
- Acoustic emission and acousto-ultrasonic techniques for wood and wood-based composites: a review (2002)
- Laboratory studies of CCA-C leaching : influence of wood and soil properties on extent of arsenic and copper depletion. (2002)
- Successful approaches to recycling urban wood waste (2002)
- Pulpwood supply and demand : development in the South, little growth elsewhere. (2002)
- Progress in the development and optimization of polyoxometalate delignification systems (2002)
- Sustainable composites from natural resources (2002)
- Forestry implications of agricultural short-rotation woody crops in the USA (2002)
- Review of log sort yards (2002)
- Micro and colloidal stickie pacification with precipitated calcium carbonate (2002)
- Laboratory tests on fungal resistance of wood filled polyethylene composites (2002)
- Effects of moisture on aspen-fiber/polypropylene composites (2002)
- Use of lignocellulose materials as sorption media for phosphorus removal (2002)
- Photostabilization of wood flour filled HDPE composites (2002)
- Timber bridge evaluation : a global nondestructive approach using impact generated FRFs (2002)
- Comparison of postbuckling model and finite element model with compression strength of corrugated boxes (2002)
- Predicting the reactivity of phenolic compounds with formaldehyde. II, continuation of an ab initio study. (2002)
- Pulp extrusion at ultra-high consistencies : selection of water soluble polymers for process optimization (2002)
- Projecting recovered paper supply in the United States. (2002)
- Wood used in industrial markets in the United States--2000 (2002)
- Potential sulfur-free pulping methods (2002)
- Novel bleaching of thermomechanical pulp for improved paper properties (2002)
- The effect on biological and moisture resistance of epichlorohydrin chemically modified wood (2002)
- Semiannual patents review, July 2001-December 2001 (2002)
- Biological resistance of polyethylene composites made with chemically modified fiber or flour (2002)
- Can laboratory and pilot recycling trials predict adhesive removal in commercial recycling systems? : results from the USPS environmentally benign stamp project (2002)
- Venting of attics & cathedral ceilings (2002)
- Accelerated weathering of natural fiber-thermoplastic composites : effects of ultraviolet exposure on bending strength and stiffness (2002)
- Recognizing and treating diseases in Caribbean trees (2002)
- Characterizing wood properties of small diameter Northwest trees (2002)
- Kiln drying maple for structural uses (2002)
- Lumber drying and heat sterilization research at the U.S. Forest Products Laboratory (2002)
- Conversion of board foot scaled logs to cubic meters in Washington State, 1970–1998 (2002)
- Update for combustion properties of wood components (2002)
- Differential regulation of mnp2, a new manganese peroxidase-encoding gene from the ligninolytic fungus Trametes versicolor PRL 572 (2002)
- Accelerated cure of phenol-formaldehyde resins : studies with model compounds (2002)
- Recent economic downturn and pulpwood markets (2002)
- Alternative technologies for water quality management (2002)
- Semi-solid state bioremediation of CCA-treated wood using malted barley as a nutrient source (2002)
- Limiting conditions for decay in wood systems (2002)
- Nondestructive structural evaluation of wood floor systems with a vibration technique. (2002)
- Mechanisms of protection by NHA against fungal decay (2002)
- Gradual upturn underway in paper, paperboard and woodpulp markets (2002)
- Treatment of wood with glucose-diammonium phosphate for fire and fungal decay protection (2002)
- Cone calorimeter testing of vegetation--an update (2002)
- 3D engineered fiberboard : a new structural building product (2002)
- Emerging materials: what will durable materials look like in 2020? (2002)
- BF into cubic meters (2002)
- Wood and fish residuals composting in Alaska (2002)
- Predicting current serviceability and residual service life of plywood roof sheathing using kinetics-based models (2002)
- Correlation of adhesive strength with service life of paint applied to weathered wood (2002)
- Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature (2002)
- Analysis of off-axis tension test of wood specimens (2002)
- Effects of incising on treatability and leachability of CCA-C-treated eastern hemlock (2002)
- Wood-plastic composites in the United States : the interfacing of two industries (2002)
- What do you need to know to get started with wood and fish waste composting? (2002)
- Microwaving logs for energy savings and improved paper properties for mechanical pulps (2002)
- Recyclable zein-coated kraft paper and linerboard (2002)
- Thermomechanical pulping of loblolly pine juvenile wood (2002)
- U.S. Forest products annual market review and prospects, 2000-2003 (2002)
- New species of Oudemansiella and Pouzarella (Basidiomycetes: Agaricales) from Puerto Rico (2002)
- Bark beetles and fungal associates colonizing white spruce in the Great Lakes region. (2002)
- Predicting the hydroxymethylation rate of phenols with formaldehyde by molecular orbital calculation. (2002)
- Erosion rates of wood during natural weathering. Part III, Effect of exposure angle on erosion rate (2001)
- Achievements in the utilization of poplarwood : guideposts for the future (2001)
- Semiannual patents review, January — June 2001. (2001)
- Guide for minimizing the effect of preservative-treated wood on sensitive environments (2001)
- An inverse moisture diffusion algorithm for the determination of diffusion coefficient (2001)
- Rolling your own : linear model hypothesis testing and power calculations via the singular value decomposition (2001)
- Characteristics of ten tropical hardwoods from certified forests in Bolivia. Part I, Weathering characteristics and dimensional change (2001)
- New species of Amanita from the Dominican Republica, Greater Antilles (2001)
- Nondestructive evaluation of standing trees with a stress wave method. (2001)
- Preservation of hyphal-forming brown- and white-rot wood-inhabiting basidiomycetes (2001)
- Alternative projections of the impacts of private investment on southern forests: a comparison of two large-scale forest sector models of the United States. (2001)
- Wood : adhesives (2001)
- Reaction-to-fire testing and modeling for wood products (2001)
- U.S. Forest products annual market review and prospects, 1999–2002 (2001)
- Effect of moisture content on dowel-bearing strength (2001)
- Exploring the uses for small-diameter trees (2001)
- Protecting wood decks from biodegradation and weathering : evaluation of deck finish systems (2001)
- Floor vibration : a possible assessment method for historic buildings (2001)
- Efficacy of curtailment announcements as a predictor of lumber supply (2001)
- Thermal degradation of fire-retardant -treated wood : predicting residual service life (2001)
- Relationship between longitudinal stress wave transit time and moisture content of lumber during kiln-drying (2001)
- Wood : mechanical fasteners (2001)
- Method for estimating air-drying times of lumber (2001)
- Pest risk assessment of the importation into the United States of unprocessed Eucalyptus logs and chips from South America (2001)
- Medium density fiberboard made from Eucalyptus saligna (2001)
- POM-assisted electrochemical delignification and bleaching of chemical pulp (2001)
- Equilibrating metal-oxide cluster ensembles for oxidation reactions using oxygen in water (2001)
- Guidelines for design, installation, and maintenance of a waterproof wearing surface for timber bridge decks (2001)
- Modeling strength loss in wood by chemical composition. Part I, An individual component model for southern pine (2001)
- Evolution of standardized procedures for adjusting lumber properties for change in moisture content (2001)
- Erosion rates of wood during natural weathering. Part I, Effects of grain angle and surface texture (2001)
- Procedures for developing allowable properties for a single species under ASTM D1990 and computer programs useful for the calculations (2001)
- Particleboard made from remediated CCA-treated wood : evaluation of panel properties (2001)
- Standard plans for timber bridge superstructures (2001)
- Delignification of high kappa number soda-ODiMAQ pulps with a polyoxometalate (2001)
- Formation and properties of juvenile wood in southern pines: a synopsis (2001)
- Use and production of solid sawn timbers in the United States (2001)
- Derivation of nominal strength for wood utility poles (2001)
- Performance of fasteners in wood flour-thermoplastic composite panels (2001)
- Formation, isomerization, and derivatization of keggin tungstoaluminates. (2001)
- Hygrophoraceae (Agaricales) of the Greater Antilles : Hygrocybe subgenus Pseudohygrocybe section Firmae (2001)
- Influence of moisture absorption on mechanical properties of wood flour- polypropylene composites (2001)
- Wood products : thermal degradation and fire (2001)
- Erosion rates of wood during natural weathering. Part II, Earlywood and latewood erosion rates (2001)
- Effect of water repellent preservatives and other wood treatments on restoration and durability of millwork (2001)
- Inadequate redrying linked to dimensional instability of CCA-treated southern pine lumber (2001)
- Ultrasonic inspection of a glued laminated timber fabricated with defects (2001)
- Evaluation of physical changes in wood during colonization by Ceriporiopsis submervispora (2001)
- Nondestructive evaluation of potential quality of creosote-treated piles removed from service (2001)
- Highly efficient and stable catalyst for peroxynitrite decomposition (2001)
- 2000 national fire plan and its ramifications for wood supply from western national forests (2001)
- Interior moisture design loads for residences (2001)
- Impact of U.S. forest products consumption, imports, and exports on foreign timber harvests. (2001)
- Heating times for round and rectangular cross sections of wood in steam (2001)
- Water-repellent preservative treatment of brick molding prior to factory priming improves paint service life (2001)
- Efficacy of copper borax preservative against wood decay (2001)
- Factors affecting the use of increment cores to assess fixation (2001)
- Studies in neotropical polypores. 11, Antrodia aurantia, a new species from the Dominican Republic, Greater Antilles (2001)
- Effect of heart checks on flexural properties of reclaimed 6 by 8 Douglas-fir timbers (2001)
- Properties and utilization of poplar wood (2001)
- Wood anatomy of Corynocarpaceae is consistent with Cucurbitalean placement (2001)
- Fiber reinforced engineering plastics (2001)
- Progress in using hydroxymethylated resorcinol coupling agent to improve bond durability to wood (2001)
- Effects of weathering on color loss of natural fiber thermoplastic composites (2001)
- Assessing socioeconomic impacts of climate change on US forests, wood product markets, and forest recreation (2001)
- Recyclability of mixed office waste papers containing pressure sensitive adhesives and silicone release liners (2001)
- Reaction of formaldehyde with phenols: a computational chemistry study. (2001)
- Reaction of formaldehyde at the ortho- and para-positions of phenol: exploration of mechanisms using computational chemistry. (2001)
- Projections of the U.S. timber supply and demand situation to 2050 : draft findings from the USDA Forest Service 2000 RPA Timber Assessment. (2001)
- Evaluation and field load testing of timber railroad bridge (2000)
- Is it time to revisit the log-sort yard? (2000)
- Commentary on factors affecting transverse vibration using an idealized theoretical equation (2000)
- Internal defect detection success story : industry taps into the Forest Products Laboratory's research capabilities-so can you (2000)
- Evaluation of white-rot fungal growth on southern yellow pine wood chips pretreated with blue-stain fungi (2000)
- Potential for expanding small diameter timber market : assessing use of wood posts in highway applications (2000)
- Research challenges for structural use of small-diameter round timbers (2000)
- New and interesting ectomycorrhizal fungi from Puerto Rico, Mona, and Guana Islands (2000)
- Correlation of smoke development in room tests with cone calorimeter data for wood products (2000)
- Lumber recovery from small-diameter ponderosa pine from Flagstaff, Arizona. (2000)
- Correlation between oxalic acid production and copper tolerance in Wolfiporia cocos (2000)
- A provisional name for taxon of Phanerochaete from South Africa (2000)
- Aldehyde emissions from particleboard and medium density fiberboard products (2000)
- Pulp extrusion for recycling wastepapers and paper mill sludges (2000)
- Ranking mechanical pulps for their potential to photoyellow (2000)
- Hygrophoraceae of the Greater Antilles : Hygrocybe subgenus Hygrocybe (2000)
- Termite and fungal resistance of in situ polymerized tributyltin acrylate and acetylated Indonesian and USA wood (2000)
- Machine grading of lumber : practical concerns for lumber producers (2000)
- Wood in transportation program-- an overview (2000)
- Effects of phosphoramides on wood dimensional stability (2000)
- Evaluation of new creosote formulations after extended exposures in fungal cellar tests and field plot tests (2000)
- Effects of shear coupling on shear properties of wood (2000)
- An inverse moisture diffusion algorithm for the determination of diffusion coefficient (2000)
- Distribution of borates around point source injections in wood members exposed outside (2000)
- Incompatibility groups among North American populations Laetiporus sulphureus sensu lato (2000)
- Industrial wood productivity in the United States, 1900-1998 (2000)
- Effects of weathering on color loss of natural fiber : thermoplastic composites (2000)
- Drying hardwood lumber (2000)
- Durability of one-part polyurethane bonds to wood improved by HMR coupling agent (2000)
- Five-year field trials using preservative-treated, second-growth Douglas-fir exposed in ground contact in Australia (2000)
- Economic potential of short-rotation woody crops on agricultural land for pulp fiber production in the United States. (2000)
- Quality control troubleshooting tools for the mill floor (2000)
- An experimental method to simulate incipient decay of wood basidiomycete fungi (2000)
- Future market scenarios for pulpwood supply from agricultural short-rotation woody crops (2000)
- Small-diameter log evaluation for value-added structural applications (2000)
- Results-driven approach to improving quality and productivity (2000)
- Juvenile wood effect in red alder : analysis of physical and mechanical data to delineate juvenile and mature wood zones (2000)
- Above ground performance of preservative-treated western wood species (2000)
- Ethical conduct for research : a code of scientific ethics (2000)
- Shear test fixture design for orthotropic materials (2000)
- Bioprocessing preservative-treated waste wood (2000)
- Polyoxometalate (POM) catalyst systems : chemical principles and reactions with lignin and oxygen (2000)
- Reliability-based criteria for load and resistance factor design code for wood bridges (2000)
- Beetle-killed spruce utilization in the Kenai peninsula. (2000)
- Bending creep and load duration of Douglas-fir 2 by 4s under constant load for up to 12-plus years (2000)
- Restoration of severely weathered wood (2000)
- Role of cation size in the energy of electron transfer to 1:1 polyoxometalate ion pairs {(M+)(Xn+VW11O40)}(8–n)–(M=Li, Na, K) (2000)
- Development of naphthenic acid fractionation with supercritical fluid extraction for use in wood decay testing (2000)
- Properties of particleboard made from recycled CCA-treated wood (2000)
- Lightweight, high-opacity Bible paper by fiber loading (2000)
- Inhibition of decay fungi using cotton cellulose hydrolysis as a model for wood decay (2000)
- Highly filled formaldehyde-free natural fiber polypropylene composites (2000)
- Resorcinol-formaldehyde reactions in dilute solution observed by carbon-13 NMR spectroscopy (2000)
- Correlating off-axis tension tests to shear modulus of wood-based panels (2000)
- Treatability of U.S. wood species with pigment emulsified creosote (2000)
- Finishability of CCA pressure-treated wood (2000)
- Isolating metal-tolerant bacteria capable of removing copper, chromium, and arsenic from treated wood (2000)
- Achievements in the utilzation of poplar wood : guideposts for the future : [abstract] (2000)
- Two test level 4 bridge railing and transition systems for transverse timber deck bridges (2000)
- Ethanol and thermotolerance in the bioconversion of xylose by yeasts (2000)
- Wood properties affecting finish service life (2000)
- Estimates of air drying times for several hardwoods and softwoods (2000)
- Nondestructive methods of evaluating quality of wood in preservative-treated piles (2000)
- Stress wave timing nondestructive evaluation tools for inspecting historic structures : a guide for use and interpretation. (2000)
- Preliminary investigation on the natural durability of guayule (Parthenium argentatum) based wood products (2000)
- Forest Products Laboratory research program on small-diameter material. (2000)
- A homokaryotic derivative of a Phanerochaete chrysosporium strain and its use in genomic analysis of repetitive elements (2000)
- Accelerated cure of phenol-formaldehyde by the addition of cure accelerators : studies with model compounds (2000)
- Static and vibration moduli of elasticity of salvaged and new joists (2000)
- Quantification of pressure sensitive adhesive, residual ink, and other colored process contaminants using dye and color image analysis (2000)
- Engineering evaluation of 55-year-old timber columns recycled from an industrial military building (2000)
- Transcrystalline interphases in natural fiber-PP composites: effect of coupling agent (2000)
- Inhibition of termite damage by N`N-napthaloylhydroxyamine (NHA) : Reticulotermes flavipes (Kollar) vs. Coptotermes formosanus Shiraki (2000)
- The effect of release liner materials on adhesive contaminants, paper recycling and recycled paper properties (2000)
- Natural decay resistance of heartwood from dead, standing yellow-cedar trees : laboratory evaluations (2000)
- Best of both worlds : clear exterior finishes : in search of finishes that protect wood without hiding its natural beauty (2000)
- Biomechanical pulping with Phlebiopsis gigantea reduced energy consumption and increased paper strength : [summary] (2000)
- Development of USPS Laboratory and pilot-scale testing protocols (2000)
- Effect of compression wood on leaching of chromium, copper, and arsenic from CCA-C treated red pine (Pinus resinosa Ait.) (2000)
- Nondestructive evaluation for sorting red maple logs (2000)
- Structural lumber properties of Wisconsin-5 hybrid poplar : [abstract] (2000)
- Enhanced wet air oxidation : synergistic rate acceleration upon effluent recirculation (2000)
- Simplified analysis of timber rivet connections (2000)
- Melt rheological properties of natural fiber-reinforced polypropylene (2000)
- Space-frame connection for small-diameter round timber (2000)
- Plasma modification of sisal and high-density polyethylene composites : effect on mechanical properties (2000)
- Treatability of five Appalachian wood species with creosote and timbor® (2000)
- Method for evaluating toner adhesion on copier paper (2000)
- Wood-based panels : supply, trade and consumption (2000)
- Outlook for U.S. paper and paperboard sector and wood fiber supply in North America (2000)
- Serviceability modeling : predicting and extending the useful service life of FRT-plywood roof sheathing (2000)
- Method for adjusting warp measurements to a different board dimension (2000)
- Removal of toxic heavy metal ions in runoffs by modified alfalfa and juniper (2000)
- Semi-annual conference review January-June 2000 (2000)
- Reaction of [rho]-hydroxycinnamyl alcohols with transition metal salts. 3, Preparation and NMR characterization of improved DHPS (2000)
- Performance of copper-based wood preservatives in soil bed exposures (1999/2000)
- Mechanical grading of oak timbers (1999)
- Softwood lumber prices for evaluation of small diameter timber stands in the Intermountain West. (1999)
- Validity of plant fiber length measurement : a review of fiber length measurement based on kenaf as a model (1999)
- Temperature corrections for mechanically graded lumber (1999)
- The Aging of lignin rich papers upon exposure to light : its quantification and prediction (1999)
- Semiannual patents review, January-June 1999 (1999)
- Engineering analysis of lightweight high-opacity newsprint production by fiber loading (1999)
- Coagulation pretreatment for ultrafiltration of deinking effluents containing flexographic inks (1999)
- The structures of native celluloses, and the origin of their variability (1999)
- Flexographic newspaper deinking : treatment of wash filtrate effluent by membrane technology (1999)
- Modelling the drying of three-dimensional pulp moulded structures. Part II, Drying data obtained from flat panels using virgin and recycled paper fibre (1999)
- Stress grading of recycled lumber and timber (1999)
- In-service moisture content of hardboard lap siding in southern Florida (1999)
- Selection and application of exterior stains for wood (1999)
- Xylaria at the Forest Products Laboratory : past, present, and future (1999)
- Assessment of the potential quality of preservative-treated pilings removed from service : [abstract] (1999)
- High resolution microtomography for density and spatial infomation about wood structures (1999)
- Characteristics and availability of commercially important woods (1999)
- Oil sorption by lignocellulosic fibers (1999)
- How woody residuals are recycled in the United States (1999)
- Structural reliability of plank decks (1999)
- Nondestructive methods for the structural evaluation of wood floor systems in historic buildings : preliminary results : [abstract] (1999)
- Innovative approach to solving "stickies" problem and developing environmentally benign pressure sensitive adhesives through partnerships (1999)
- The individual structures of native celluloses (1999)
- Railing systems for use on timber deck bridges (1999)
- Fire safety (1999)
- Lightweight, high-opacity paper : process costs and energy use reduction (1999)
- Wood handbook : wood as an engineering material. (1999)
- Biomechanical pulping : a mill-scale evaluation (1999)
- Cuphophylluspegleri sp. nov. (Hygrophoraceae) from the Lesser Antilles (1999)
- Modelling the charring behaviour of structural lumber (1999)
- Faustmann and the forestry tradition of outcome-based performance measures (1999)
- Analytical model of flame spread in full-scale room/corner tests (ISO9705) (1999)
- Predicting the reactivity of adhesive starting materials (1999)
- T-section glulam timber bridge modules : modeling and performance (1999)
- Biodeterioration of wood (1999)
- Crashworthy railing for timber bridges (1999)
- Commercial lumber (1999)
- Small-diameter utilization issues and opportunities (1999)
- Fastenings (1999)
- Design criteria for portable timber bridge systems : static versus dynamic loads (1999)
- Finishing of wood (1999)
- Compatibility of pressure sensitive adhesives with recycling unit operations (1999)
- Lumber stress grades and design properties (1999)
- Flakeboard thickness swelling. Part II, Fundamental response of board properties to steam injection pressing (1999)
- Ultrasonic inspection and analysis techniques in green and dried lumber (1999)
- Nonlinear finite element modeling of corrugated board (1999)
- Mechanical properties of wood (1999)
- Incorporation of hydroxy-cinnamaldehydes into lignins (1999)
- Physical properties and moisture relations of wood (1999)
- Effect of fire-retardant treatment on plywood pH and the relationship of pH to strength properties (1999)
- Veneer producers can cope with cost-price squeeze (1999)
- On the importance of hydroquinone/p-quinone redox system in the photoyellowing of mechanical pulps (1999)
- Round timbers and ties (1999)
- Closed-mill delignification by design using polyoxometalates (1999)
- Structural analysis equations (1999)
- Small-diameter trees used for chemithermomechanical pulps. (1999)
- Structure of wood (1999)
- Rheology and extrusion of low-grade paper and sludge (1999)
- Use of wood in buildings and bridges (1999)
- Drying and control of moisture content and dimensional changes (1999)
- Wood-based composites and panel products (1999)
- Solution state NMR of lignins (1999)
- Glued structural members (1999)
- Properties of kenaf/polypropylene composites (1999)
- The next century of wood products utilization : a call for reflection and innovation (1999)
- Decay of wood and wood-based products above ground in buildings (1999)
- Wood preservation (1999)
- Stormwater filtration of toxic heavy metal ions using lignocellulosic materials selection process, fiberization, chemical modification, and mat formation (1999)
- Knock on wood : real recycling opportunities are opening up (1999)
- Adhesive bonding of wood materials (1999)
- Evaluation of recycled timber members (1999)
- U.S. Timber production, trade, consumption, and price statistics 1965-1997 (1999)
- Miscellaneous wood structures (1999)
- Evaluation of lumber recycled from an industrial military building (1999)
- Repair of white oak glued-laminated beams (1999)
- Peroxyl radicals are potential agents of lignin biodegradation (1999)
- Global cycle changes the rules for U.S. pulp and paper (1999)
- Vegetative anatomy and relationships of Setchellanthus caeruleus (Setchellanthaceae) (1999)
- Properties of kenaf from various cultivars, growth and pulping conditions (1999)
- Reduction of greenhouse gases by fiber-loaded lightweight, high-opacity newsprint production (1999)
- Determining the minimum conditions for soda-anthraquinone pulping of kenaf bast, core, and whole stalk fibers (1999)
- Stormwater filtration of a municipal detention pond (1999)
- Mildew and mildew control for wood surfaces (1999)
- Synthesis and evaluation of borates derived from boric acid for fire and decay protections (1999)
- United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1996 (1999)
- Medium density fiberboards from plantation grown Eucalyptus saligna (1999)
- Specialty treatments (1999)
- Dynamic fracture toughness of cellulose-fiber-reinforced polypropylene : preliminary investigation of microstructural effects (1999)
- Evaluation of several finishes on severely weathered wood (1999)
- Disruption of the cytochrome c gene in xylose-utilizing yeast Pichia stipitis leads to higher ethanol production (1999)
- Nonparametric Bayesian predictive distributions for future order statistics (1999)
- Strength and processing properties of wet-formed hardboards from recycled corrugated containers and commercial hardboard fibers (1999)
- Changes in kenaf properties and chemistry as a function of growing time (1999)
- Recycling evaluation of new-generation environmentally benign pressure sensitive adhesives (1999)
- Air drying of lumber. (1999)
- Recent advances in polyoxometalate based delignification (1999)
- Forest management and the diversity of wood-inhabiting fungi (1999)
- Efficacy of pinosylvins against white-rot and brown-rot fungi (1999)
- A raman microprobe investigation of the molecular architecture of loblolly pine tracheids (1999)
- Effect of prestain on the release rate of copper, chromium, and arsenic from western hemlock (1999)
- Volatile organic compound hot-press emissions from southern pine furnish as a function of adhesive type (1999)
- Water repellents and water-repellent preservatives for wood (1999)
- Nonlinear programming models to optimize uneven-aged loblolly pine management (1999)
- Building codes : obstacle or opportunity? (1999)
- Ultrafiltrative deinking of flexographic ONP : the role of surfactants (1999)
- Synthesis, X-ray structure, and hydrolytic chemistry of the high potent antiviral polyniobotungstate A-[alpha]-[Si2Nb6W18O77]8– (1999)
- Extending fiber resources : fiber loading recycled fiber and mechanical pulps for lightweight, high opacity paper (1999)
- Biomechanical pulping of kenaf (1999)
- Screening of fungi for soil remediation potential (1999)
- Regeneration of southern pine stands under ecosystem management in the Piedmont (1999)
- Forest products research in IUFRO history and potential (1999)
- Dimensional stability and decay resistance of composite fiberboard made from plantation-grown southern yellow pine (1999)
- Production of polygalacturonase and increase of longitudinal gas permeability in southern pine by brown-rot and white-rot fungi (1999)
- Correlation of water vapor adsorption behavior of wood with surface thermodynamic properties (1999)
- Evidence of cellulose digestion in the wood boring isopod Sphaeroma terebrans (1999)
- Inspection of timber bridges using stress wave timing nondestructive evaluation tools : a guide for use and interpretation (1999)
- Organization and differential regulation of a cluster of lignin peroxidase genes of Phanerochaete chrysosporium (1999)
- Semiannual patents review, July-December 1998 (1999)
- A stress wave based approach to NDE of logs for assessing potential veneer quality: Part I—small-diameter ponderosa pine. (1999)
- An FT-raman study of softwood, hardwood, and chemically modified black spruce MWLS (1999)
- Wood products utilization : a call for reflection and innovation (1999)
- Fixation effects on the release of copper, chromium and arsenic from CCA-C treated marine piles (1999)
- The role of solid state 13 C NMR spectroscopy in studies of the nature of native celluloses (1999)
- What factors control dimerization of coniferyl alcohol? (1999)
- Where to cut, where to run : prospects for U.S. South softwood timber supplies and prices (1999)
- Adhesive in the buckling failure of corrugated fiberboard : a finite element investigation (1998)
- Semiannual patents review, January-June 1998 (1998)
- There`s a right way to buy exterior house paint and this is the season for it (1998)
- Measuring the triaxial load-deformation response of orthotropic materials subjected to large and small strain regimes (1998)
- Modeling drying of three-dimensional pulp molded structures. Part I, Experimental program (1998)
- Delignification of wood and kraft pulp with polyoxometalates (1998)
- Injection molded composites from kenaf and recycled plastic (1998)
- Growth model for uneven-aged loblolly pine stands : simulations and management implications (1998)
- Distribution and dispersal of Xylaria endophytes in two tree species in Puerto Rico (1998)
- Wood fiber supply and demand in the United States. (1998)
- Codes and standards for structural wood products and their use in the United States (1998)
- Properties of styrene-maleic anhydride copolymers containing wood-based fillers (1998)
- Kraft pulping of industrial wood waste (1998)
- Protection of Ochroma pyramidale from fungal decay with N,N-napthaloylhydroxylamine (1998)
- Wolfiporia cocos : a potential agent for composting of bioprocessing Douglas-fir wood treated with copper-based preservatives (1998)
- Transcript patterns of Phanerochaete chrysosporium genes in organopollutant contaminated soils and in wood (1998)
- Assessment of compatibility among Armillaria cepistipes, A. sinapina, and North American biological species X and XI, using culture morphology and molecular biology (1998)
- Flakeboard thickness swelling. Part I, Stress relaxation in a flakeboard mat (1998)
- Genetic engineering of Pichia stipitis for fermentation of xylose (1998)
- Stickie removal using neutral enzymatic repulping pressure screening (1998)
- Flake storage effects on properties of laboratory-made flakeboards (1998)
- Analysts guide to FEEMA for financial analysis of ecosystem management activities. (1998)
- Some relations among engineering constants of wood (1998)
- Mechanisms for kappa reduction and color removal by xylanases (1998)
- Incorporating biopulping technology into wood yard operations (1998)
- Environmentally benign USPS stamps : baseline pilot recycling results (1998)
- Contributions to the study of gasteromycetes of Puerto Rico (1998)
- SouthPro : a computer program for managing uneven-aged loblolly pine stands (1998)
- Comparison of test protocols for standard room/corner tests (1998)
- Plans for crash-tested wood bridge railings for concrete decks (1998)
- Wood-based panel plant locations and timber availability in selected U.S. states (1998)
- Research accomplishments for wood transportation structures based on a national research needs assessment (1998)
- Equilibrium moisture content of wood in outdoor locations in the United States and worldwide (1998)
- Plans for crash-tested bridge railings for longitudinal wood decks on low-volume roads (1998)
- Value-added mechanical pulps for light weight, high opacity paper (1998)
- Kinetics of Mn3+-oxalate formation and decay in reactions catalyzed by manganese peroxidase of Ceriporiopsis subvermispora (1998)
- Know your fibers : process and properties, or, a material science approach to designing pulp molded products (1998)
- Strength and durability of one-part polyurethane adhesive bonds to wood (1998)
- Alboleptonia from the Greater Antilles (1998)
- Air pressures in wood frame walls (1998)
- Oxalate metabolism in liquid cultures of Ceriporiopsis subvermispora : a possible pathway for extracellular H2O2 production (1998)
- 2-deoxyglucose as a selective agent for derepressed mutants of Pichia stipitis (1998)
- Withdrawal strength of ring-shank nails embedded in southern pine lumber (1997)
- An ultrasonic technique for predicting tensile strength of southern pine lumber (1997)
- Control of wood decay by Trichoderma (Gliocladium virens. I, Antagonistic properties (1997)
- Softwoods of North America (1997)
- Linking log quality with product performance (1997)
- Nondestructive evaluation of green wood using stress wave and transverse vibration techniques (1997)
- Quantification of micro stickies (1997)
- Heat release rate of wood-plastic composites (1997)
- Pulp quality from small-diameter trees. (1997)
- U.S. timber production, trade, consumption, and price statistics, 1963-1994 (1997)
- Role of wood production in ecosystem management : proceedings of the Sustainable Forestry Working Group at the IUFRO All Division 5 conference, Pullman, Washington, July 1997 (1997)
- Executive summary. (1997)
- Effect of air velocity on the drying rate of single eastern white pine boards (1997)
- Fire performance issues (1997)
- Review of wood-based panel sector in United States and Canada (1997)
- TT : a program that implements predictor sort design and analysis (1997)
- Transverse vibration of a simply supported beam with symmetric overhang of arbitrary length (1997)
- Review of thickness swell in hardboard siding : effect of processing variables (1997)
- Strength and life criteria for corrugated fiberboard by three methods (1997)
- Inferences from growing trees backwards (1997)
- Multiple-bolted joints in wood members : a literature review (1997)
- Objectives and study design of the Colville study: silviculture, ecology, utilization, and economics of small-diameter densely stocked stands. (1997)
- Effect of fiberglass reinforcement on the behavior of bolted wood connections (1997)
- Bacterial associations with decaying wood : a review (1996)
- Waste-wood-derived fillers for plastics (1996)
- Energy and minerals industries in national, regional, and state economies (1996)
- Economic feasibility of products from inland West small-diameter timber (1996)
- Leaching of wood preservative components and their mobility in the environment : summary of pertinent literature (1996)
- Charring rate of wood exposed to a constant heat flux (1996)
- Chemical modification of lignocellulosics (1996)
- Waste-wood-derived fillers for plastics (1996)
- Recycling of wood and paper products in the United States (1996)
- Nondestructive Methods for Detecting Defects in Softwood Logs (1996)
- Summary of U.S. research on wood transportation structures (1996)
- Capacity, production, and manufacture of woodbased panels in the United States and Canada (1996)
- Ultrasonic defect detection in wooden pallet parts for quality sorting (1996)
- Ignitability analysis using the cone calorimeter and lift apparatus (1996)
- Value of timber and agricultural products in the United States, 1991 (1996)
- Detection of brown-rot antigens in southern pine (1996)
- National Conference on Wood Transportation Structures (1996)
- Room/corner tests of wall linings with 100/300 kW burner (1995)
- Recovery of paper and wood for recycling : actual and potential (1995)
- Geotextiles : a specific application of biofibers (1995)
- Field performance of stress-laminated timber bridges on low-volume roads (1995)
- Standard plans for southern pine bridges (1995)
- Stress wave techniques for determining quality of dimensional lumber from switch ties (1995)
- Effect of moisture content on strength of CCA-treated lumber (1995)
- Recycling research progress at the Forest Products Laboratory. (1995)
- Plans for crash-tested bridge railings for longitudinal wood decks (1995)
- Hardwoods of North America (1995)
- Western hardwoods : value-added research and demonstration program (1995)
- Recycled newspaper fibers as reinforcing fillers in thermoplastics. Part I, Analysis of tensile and impact properties in polypropylene (1994)
- Kiln drying lumber in the United States : a survey of volume, species, kiln capacity, equipment, and procedures, 1992-1993 (1994)
- Literature review on use of nonwood plant fibers for building materials and panels (1994)
- Full field stress/strain analysis : use of Moire and TSA for wood structural assemblies (1994)
- Steam-assisted hot-pressing of construction plywood (1994)
- Nondestructive testing for assessing wood members in structures : a review (1994)
- Capacity, production, and manufacturing of woodbased panels in North America (1994)
- Response of Lutz, Sitka, and white spruce to attack by Dendroctonus rufipennis (Coleoptera: Scolytidae) and blue stain fungi (1994)
- Differential scanning calorimetry of the effects of temperature and humidity on phenol-formaldehyde resin cure (1994)
- Failure mechanisms in wood joints bonded with urea-formaldehyde adhesives (1994)
- Simulating wall and corner fire tests on wood products with the OSU room fire model (1994)
- United States pulpwood receipts : softwood and hardwood, roundwood and residues, 1950-1989 (1993)
- Forest products from Latin America : annotated bibliography of world literature on research, industry, and resource of Latin America 1915 to 1989 (1993)
- Dissolving pulp industry : market trends (1993)
- Development of a six-year research needs assessment for timber transportation structures (1993)
- Specific gravity, moisture content, and density relationship for wood (1993)
- Northeast economic data and retrieval system (1993)
- Historical price trends of nonconiferous tropical logs and sawnwood imported to the United States, Europe, and Japan (1993)
- Diversity of lignicolous basidiomycetes in coarse woody debris (1993)
- More rapid edgewise crush test methods (1993)
- The strength of Norwegian glued laminated beams (1992)
- Fortran programs for reliability analysis (1992)
- Industrial trials of low-expansivity sawblades (1992)
- Data reduction of room tests for zone model validation (1992)
- Seismic performance of low-rise wood buildings (1992)
- Service life of treated and untreated Black Hills ponderosa pine fenceposts (1992)
- Moisture sorption properties of composite boards from esterified aspen fiber (1992)
- Potential uses for peroxymonosulfate in pulping and bleaching (1992)
- Burning rate of solid wood measured in a heat release rate calorimeter (1992)
- Dry kiln operator's manual (1991)
- Papermaking properties of aspen ultrahigh-yield mechanical pulps (1991)
- Exterior wood in the South : selection, applications, and finishes (1991)
- Relative drying times of 650 tropical woods : estimation by green moisture content, specific gravity, and green weight density (1991)
- Multivariate stochastic simulation with subjective multivariate normal distributions (1991)
- Cost function approach for estimating derived demand for composite wood products (1991)
- How overdrying wood reduces its bonding to phenol-formaldehyde adhesives : a critical review of the literature. Part II, Chemical reactions (1991)
- VENVAL : a plywood mill cost accounting program (1991)
- Wood decay by brown-rot fungi : changes in pore structure and cell wall volume (1991)
- Wood as an adherend (1991)
- Forest products from Latin America : an almanac of the state of the knowledge and the state of the art (1991)
- Wall and corner fire tests on selected wood products (1991)
- Opportunities to change timber demand through altered timber utilization (1990)
- Resin characterization (1990)
- Heat release from wood wall assemblies using oxygen consumption method (1990)
- How overdrying wood reduces its bonding to phenol-formaldehyde adhesives : a critical review of the literature. Part I, Physical responses (1990)
- The role of boron in flame-retardant treatments (1990)
- Bibliography of FPL tropical forest utilization research–1910 to 1989 (1990)
- Production of ethanol from xylose by Candida shehatae grown under continuous or fed-batch conditions (1990)
- Fire endurance research at the Forest Products Laboratory (1990)
- PLYMAP : a computer simulation model of the rotary peeled softwood plywood manufacturing process (1990)
- A PFI mill can be used to predict biomechanical pulp strength properties (1990)
- Computer programs for adjusting the mechanical properties of 2-inch dimension lumber for changes in moisture content (1990)
- Chronicle of 65 years of wood finishing research at the Forest Products Laboratory (1989)
- Choosing and applying fire-retardant-treated plywood and lumber for roof designs (1989)
- National measures of forest productivity for timber (1989)
- Plywood manufacturing cost trends, excluding wood, in Western U.S. mills: 1975-1988 (1989)
- Structural performance of light-frame roof assemblies. I, Truss assemblies designed for high variability and wood failure (1989)
- Light-frame wall and floor systems : analysis and performance (1989)
- Room fire test for fire growth modeling : a sensitivity study (1989)
- Investment opportunity : the FPL low-cost solar dry kiln (1988)
- Shear design of wood beams : state of the art (1988)
- Electric moisture meters for wood (1988)
- Seismic behavior of low-rise wood frame buildings (1988)
- Continuous xylose fermentation by Candida shehatae in a two-stage reactor (1988)
- Structural composite panel performance under long-term load (1988)
- Dry kiln schedules for commercial woods : temperate and tropical (1988)
- Measurements needed for on-line control of retention and drainage (1987)
- Angle to grain strength of dowel-type fasteners (1987)
- Naval stores research at the Forest Products Laboratory, past and present (1987)
- Treatments that enhance physical properties of wood (1987)
- Bolted-connection design (1987)
- Mass spectrometric method to determine the chain length of oligosaccharides attached to phenolic polymers by nonglycosidic linkages (1987)
- Carbohydrate modified phenol-formaldehyde resins (1986)
- Measuring the mechanical behavior of paperboard in a changing humidity environment (1986)
- Unitizing goods on pallets and slipsheets (1986)
- Steam injection pressing : large panel fabrication with southern hardwoods (1986)
- Wood particleboard and flakeboard : types, grades, and uses (1986)
- Microscopic observations during longitudinal compression loading of single pulp fibers (1986)
- New rapid method for determining edgewise compressive strength of corrugated fiberboard (1986)
- Fiberboard and hardboard research at the Forest Products Laboratory : a 50-year summary (1985)
- Rate- and duration-of-load behavior of lab-made structural flakeboards (1985)
- FPL design for lumber dry kiln using solar/wood energy in tropical latitudes (1985)
- On the palladium-on-charcoal disproportionation of rosin (1985)
- Packaging perspective, 1910-1985 (1985)
- Evaluation of mixed hardwood studs manufactured by the Saw-Dry-Rip (SDR) process (1985)
- Airborne sound transmission loss characteristics of woodframe construction (1985)
- Optimization of composite wood structural components : processing and design choices (1985)
- Potential for structural lumber substitutes (1985)
- The effects of temperature and humidity on formaldehyde emission from UF-bonded boards : a literature critique (1985)
- Effects of culture conditions on the fermentation of xylose to ethanol by Candida shehatae (1985)
- Two-stage, dilute sulfuric acid hydrolysis of wood : an investigation of fundamentals (1985)
- A microwave method for measuring moisture content, density, and grain angle of wood (1985)
- Performance of a Press-Lam bridge : a 5-year load-testing and monitoring program (1985)
- A computer program for analysis of fuelwood harvesting costs (1985)
- Best opening face system for sweepy, eccentric logs : a user’s guide (1985)
- Water repellency and dimensional stability of wood (1985)
- Sawmill simulation and the best opening face system : a user`s guide (1985)
- Dilute acid hydrolysis of paper birch : kinetics studies of xylan and acetyl-group hydrolysis (1985)
- A nonlinear theory for elastic plates with application to characterizing paper properties (1984)
- The role of water repellents and chemicals in controlling mildew on wood exposed outdoors (1984)
- Effect of ventilation rate and board loading on formaldehyde concentration : a critical review of the literature (1984)
- Dimension yields from yellow-poplar lumber (1984)
- Trends in the production and consumption of major forest products in the United States : charts for use in classes or meetings (1984)
- How mole ratio of UF resin affects formaldehyde emission and other properties : a literature critique (1984)
- Factors determining lumber recovery in sawmilling (1984)
- Computer model for economic study of unbleached kraft paperboard production (1984)
- Marine exposure of preservative-treated small wood panels (1984)
- Polymeric additive performance in closed whitewater systems (1984)
- Purdue Plane Structures Analyzer II : a computerized wood engineering system (1984)
- Moire strain analysis of paper (1983)
- Light-Frame Wall Systems: Performance and Predictability. (1983)
- COMPARE : a method for analyzing investment alternatives in industrial wood and bark energy systems (1983)
- Payback as an investment criterion for sawmill improvement projects (1983)
- Wood siding : installing, finishing, maintaining (1983)
- CROMAX : a crosscut-first computer simulation program to determine cutting yield (1983)
- Nonfermentable, glucose-containing products formed from glucose under cellulose acid hydrolysis conditions (1983)
- Formaldehyde emission from particleboard and plywood paneling : measurement, mechanism, and product standards (1983)
- Effect of coating systems on the vaporization of pentachlorophenol from treated wood (1983)
- Data for prediction of mechanical properties of aspen flakeboards (1983)
- DEP : a computer program for evaluating lumber drying costs and investments (1983)
- Plane stress analysis of wood members using isoparametric finite elements, a computer program (1983)
- Automation of a laboratory particleboard press (1982)
- Prehydrolysis of aspen wood with water and with dilute aqueous sulfuric acid (1982)
- Dimensional stability of flakeboards as affected by board specific gravity and flake alignment (1982)
- Effect of knots on stress waves in lumber (1982)
- Wood anatomy of the neotropical Sapotaceae. XXII, Pradosia (1981)
- Measuring the wetting angle and perimeter of single wood pulp fibers : a modified method (1981)
- Preservative-treated wood for foundations (1981)
- Strength and stiffness of small glued-laminated beams with different qualities of tension laminations (1981)
- A summary of modulus of elasticity and knot size surveys for laminating grades of lumber (1981)
- Analysis of continuous beams with joint slip (1981)
- FORDAT : an information retrieval system for forest economic data (1981)
- Properties of seven Colombian woods (1981)
- Conversion of xylose to ethanol under aerobic conditions by Candida tropicalis (1981)
- Procedure and computer program to calculate machine contribution to sawmill recovery (1981)
- Emission of formaldehyde by particleboard : effect of ventilation rate and loading on air-contamination levels (1981)
- Soda-amine pulping : reaction of amines with free phenolic [beta]-[omicron]-4 ethers (1981)
- Dimensional Stabilization of Wood In Use (1981)
- Wood anatomy of the neotropical Sapotaceae. XXIII, Gayella (1981)
- Bending strength of shallow glued-laminated beams of a uniform grade (1981)
- Doit-On Secher Avant Stockage Les Plaquettes D`Arbres Entiers Destinees Au Chauffage (1980)
- High-temperature drying of 7/4 yellow-poplar flitches for S-D-R studs (1980)
- EVALUE : a computer program for evaluating investments in forest products industries (1980)
- Wood anatomy of the neotropical Sapotaceae : XVII. Gambeya (1980)
- Wood anatomy of the neotropical Sapotaceae : XV. Sandwithiodoxa (1980)
- Laminated beams of isotropic or orthotropic materials subjected to temperature change (1980)
- Assessment of modification factors for a row of bolts or timber connectors (1980)
- Wood anatomy of the neotropical Sapotaceae. XVIII, Gomphiluma (1980)
- Tall oil precursors of Douglas fir (1980)
- Wood anatomy of the neotropical Sapotaceae : XIV. Elaeoluma (1980)
- Wood anatomy of the neotropical Sapotaceae : XVI. Paralabatia (1980)
- Accelerating the kiln drying of oak (1980)
- Prehydrolysis of birch wood with sulfur dioxide (1980)
- Survey of existing performance requirements in codes and standards for light-frame construction (1980)
- Durability of exterior natural wood finishes in the Pacific Northwest (1980)
- Lumber values from computerized simulation of hardwood log sawing (1980)
- Fire development and wall endurance in sandwich and wood-frame structures (1980)
- Smoldering wave-front velocity in fiberboard (1980)
- Effect of cross grain on stress waves in lumber (1980)
- Does gang ripping hold the potential for higher clear cutting yields (1980)
- Radio-frequency dielectric drying of short lengths of northern red oak (1980)
- Wood anatomy of the neotropical Sapotaceae. XIX, Chromolucuma (1980)
- Optimum fiber distribution in singlewall corrugated fiberboard (1979)
- Should whole-tree chips for fuel be dried before storage? (1979)
- Reel wheels : an application of material science (1979)
- Forest Products Laboratory natural finish (1979)
- Increment cores : how to collect, handle and use them (1979)
- Evolution of allowable stresses in shear for lumber (1979)
- Stress-wave grading techniques on veneer sheets (1979)
- Strength of log bridge stringers after several year’s use in southeast Alaska (1979)
- Extractives in eastern hardwoods : a review (1979)
- Historical considerations in evaluating timber structures (1979)
- California black oak drying problems and the bacterial factor (1979)
- Simulation of hardwood log sawing (1979)
- An assessment of the common carrier shipping environment (1979)
- How to estimate recoverable heat energy in wood or bark fuels (1979)
- Investment opportunity : the FPL EGAR lumber manufacturing system (1979)
- Evolution of tensile design stresses for lumber (1979)
- Hardwood press-lam crossties : processing and performance (1979)
- Energy efficiency in light-frame wood construction (1979)
- Deuteromycetes and selected ascomycetes that occur on or in wood: an indexed bibliography (1979)
- Data basic to the engineering of reconstituted flakeboard (1979)
- Oxygen index evaluation of fire-retardant-treated wood (1979)
- Performance of wood in a do-it-yourself solar collector (1979)
- Analysis of orthotropic beams (1979)
- Construction variables considered in fabrication of a structural flakeboard (1978)
- Accelerated aging of phenolic-bonded flakeboards (1978)
- Wood usage trends in the furniture and fixtures industry (1978)
- Bending strength of water-soaked glued laminated beams (1978)
- Strength of bolted wood joints with various ratios of member thicknesses (1978)
- Wood anatomy of the neotropical Sapotaceae. IV, Achrouteria (1978)
- Wood anatomy of the neotropical Sapotaceae. V, Calocarpum (1978)
- An information retrieval system for research file data (1978)
- Deriving allowable properties of lumber : a practical guide for interpretation of ASTM standards (1978)
- Economic analysis of wood- or bark-fired systems (1978)
- Lumber defect detection by ultrasonics (1978)
- Computer optimization of cutting yield from multiple ripped boards (1978)
- Manufacture and performance of full size structural flakeboards from Douglas-fir forest residues (1978)
- Nondestructive testing methods to predict effect of degradation on wood : a critical assessment (1978)
- Wood anatomy of the neotropical Sapotaceae. VI, Chloroluma (1978)
- Wood anatomy of the neotropical Sapotaceae. VII, Chrysophyllum (1978)
- Differential reliability : probabilistic engineering applied to wood members in bending-tension (1978)
- Hardboard-webbed I-beams : effects of long-term loading and loading environment (1978)
- Morphology of pulp fiber from hardwoods and influence on paper strength (1978)
- The formaldehyde problem in wood-based products : an annotated bibliography (1977)
- Methanol from wood waste : a technical and economic study (1977)
- A look at yellow-poplar for studs (1977)
- Protecting log cabins from decay (1977)
- Sectioning Refractory Woods for Anatomical Studies. (1977)
- Selection, production, procurement, and use of preservative treated wood : supplementing federal specification TT-W-571 (1977)
- Lumber use trends in mobile home construction (1977)
- Critical literature review of relationships between processing parameters and physical properties of particleboard (1977)
- Thermal conductive properties of wood, green or dry, from -40° to +100° C:
a literature review (1977)
- Estimating effective heating value of wood or bark fuels at various moisture contents (1977)
- A commercial application of fire retardants to dry-formed hardboards (1977)
- Effect of light quality on development of fruiting bodies of Panus fragilis (1977)
- Racking strength of walls : let-in corner bracing, sheet materials, and effect of loading rate (1977)
- Structural feasibility of parallel-laminated veneer crossarms (1977)
- PARVCOST : a particleboard variable cost program (1977)
- Modifying sales summaries can aid forest products industries (1976)
- How To Refinish Wood Siding With Latex Paints (1976)
- Durability of adhesives in plywood (1976)
- Allowable bending stresses of wood for use in portable wood ladders (1975)
- How pallets with red oak deckboards performed in use (1975)
- Mechanical Properties of 23 Species of Eastern Hardwoods. (1975)
- Taper of wood poles (1974)
- A collection of log rules (1973)
- Wood products manufacture at small sawmills and woodworking plants (1973)
- FPL designs meet family housing needs (1972)
- Sawing to reduce warp in plantation red pine studs (1972)
- Accelerating oak air drying by presurfacing (1972)
- Sawing to reduce warp in plantation red pine studs (1972)
- News and views of this kiln-drying business : a calendar for air-drying lumber in the upper Midwest (1972)
- Improvements In solar dry kiln design (1971)
- Bark And Its Possible Uses (1971)
- Simplified method for calculating shear deflections of beams. (1970)
- Minimum weight structural sandwich (1970)
- Flexural properties of glued-laminated Southern pine beams with laminations positioned by visual-stiffness criteria (1970)
- Uses for Sawdust, Shavings, And Waste Chips (1969)
- Changes in wood microstructure through progressive stages of decay (1968)
- A simplified test for adhesive behavior in wood sections exposed to fire (1968)
- Survey of specific gravity of eight Maine conifers (1968)
- Comparative Decay Resistance of Heartwood of Native Species (1967)
- Some causes of warping in plywood and veneered products (1966)
- Effect of size on bending strength of wood members (1966)
- Behavior of an epoxy-polysulfide adhesive in wood joints exposed to moisture content changes (1965)
- Development of an improved system of wood-frame house construction (1965)
- Minimum weight structural sandwich (1965)
- Treatment of kraft paperboards and a kraft pulp with acrylonitrile (1965)
- Dynamic tension testing equipment for paperboard and corrugated fiberboard (1965)
- Preservative treatment of wood for farm use (1965)
- Insulating board, hardboard, and other structural fiberboards (1965)
- Determining resistance to soft-rot fungi (1965)
- Proceedings of the Symposium on Needs for Nondestructive Testing in the Forest Products Industries (1965)
- How to make a laminated diving board (1965)
- Wood fuel preparation (1965)
- Veneer cutting and drying properties of Pacific madrone (1965)
- Physical and mechanical properties of saligna eucalyptus grown in Hawaii (1965)
- Seasoning small quantities of lumber (1965)
- Hardness, density, and shrinkage characteristics of silk-oak from Hawaii (1964)
- Stiffness and shrinkage of green and dry joists (1964)
- Performance of a rigid and a flexible adhesive in lumber joints subjected to moisture content changes (1964)
- Spanish-cedar : Cedrela spp. (1964)
- Loss from variation in sawing precision (1964)
- Linear movement of plywood and flakeboards as related to the longitudinal movement of wood (1964)
- Methods for evaluating tensile and compressive properties of plastic laminates reinforced with unwoven glass fibers (1964)
- Buckling coefficients for simply supported and camped flat, rectangular sandwich panels under edgewise compression (1964)
- Proceedings of the Symposium on Nondestructive Testing of Wood. (1964)
- Some strength and related properties of yagrumo hembra (Cecropia peltata) from Puerto Rico (1964)
- Angelique : Dicorynia guianensis Amsh. (1964)
- Adhesives for assembly of lightweight wood containers (1964)
- Chemical treatments for improving compressive strength of linerboard at high moisture conditions (1964)
- Adhesives for bonding wood to metal (1964)
- Limited evaluation of physical and mechanical properties of Nepal alder grown in Hawaii (1964)
- An electrical strain gage for the tensile testing of paper (1963)
- Electric moisture meters for wood (1963)
- Inside wood : a short trip into the interior for the layman (1963)
- Portable apparatus for surface evaluation of furniture panels (1963)
- The identification of Douglas-fir wood (1963)
- Effect of number of piles [i.e. plies] on the tear resistance of paper (1963)
- Veneer cutting and drying properties of tupelo (1963)
- Strength of orthotropic materials subjected to combined stresses (1962)
- Identification of coniferous woods (1960)
- Fluorescence microscopy for measuring fibril angles in pine tracheids (1955)
- Effect of elliptic or circular holes on the stress distribution in plates of wood or plywood considered as orthotropic materials (1944)
- Trends in economic scarcity of U.S. timber commodities ()
- Ten-year performance of treated northeastern softwoods in aboveground and ground-contact exposures ()
- Field performance of timber bridges. 5, Little Salmon Creek stress-laminated deck bridge ()
- Regional softwood sawmill processing variables as influenced by productive capacity ()
- Soil-contact decay tests using small blocks : a procedural analysis ()
- Strength and stiffness assessment of standing trees using a nondestructive stress wave technique. ()
- Monitoring of visually graded structural lumber ()
- Effect of wet bulb depression on heat sterilization time of slash pine lumber ()
- Field performance of timber bridges. 16, North Siwell Road stress-laminated bridge ()
- Field performance of timber bridges. 11, Spearfish Creek stress-laminated box-beam bridge ()
- A profile of wood use in nonresidential building construction ()
- National forests of Wisconsin : demographics and recreation participation ()
- Sawtooth forces in cutting tropical hardwoods native to South America ()
- Effectiveness of fire-retardant treatments for shingles after 10 years of outdoor weathering ()
- Sawmill closures, openings, and net capacity changes in the softwood lumber sector, 1996-2003 [electronic resource] ()
- A profile of the nonresidential nonbuilding construction market for lumber and plywood ()
- Grading options for western hemlock "pulpwood" logs from southeastern Alaska. ()
- Strength and stiffness of reinforced yellow-poplar glued-laminated beams ()
- Field performance of timber bridges. 14, Dean, Hibbsville, and Decatur stress-laminated deck bridges ()
- Fiber stress values for design of glulam timber utility structures ()
- Quality drying in a hardwood lumber predryer : guidebook--checklist ()
- Creep and creep-rupture behaviour of wood-based structural panels ()
- Structural lumber properties of hybrid poplar ()
- FPL roof temperature and moisture model : description and verification ()
- Reliability formulation for the strength and fire endurance of glued-laminated beams ()
- FPL designs meet family housing needs. ()
- Field performance of timber bridges. 9, Big Erick`s stress-laminated deck bridge ()
- Assessment of the environmental effects associated with wooden bridges preserved with creosote, pentachlorophenol, or chromated copper arsenate ()
- Predictor sort sampling, tight t`s, and the analysis of covariance : theory, tables, and examples ()
- Wood products used in constructing conservation and development projects by the Corps of Engineers in the United States, 1962 and 1978 ()
- Structural fire design : wood ()
- Quality drying of softwood lumber : guidebook - checklist ()
- Roof temperatures in simulated attics ()
- Wood products used for residential repair and remodeling in the United States, 1991 ()
- The softwood plywood industry in the United States, 1965-82 ()
- Some bivariate distributions for modeling the strength properties of lumber ()
- Feasibility of fiberglass-reinforced bolted wood connections ()
- Efficient utilization of red maple lumber in glued-laminated timber beams ()
- Increment cores : how to collect, handle, and use them ()
- Wood used in pallets manufactured in the United States, 1982 ()
- Quality drying of hardwood lumber : guidebook -- checklist ()
- Field performance of timber bridges. 10, Sanborn Brook stress-laminated deck bridge ()
- Protecting wood fences for yard and garden ()
- Field performance of timber bridges. 7, Connell Lake stress-laminated deck bridge ()
- Temporary stream and wetland crossing options for forest management ()
- Profile 1999 : softwood sawmills in the United States and Canada ()
- Field performance of timber bridges. 8, Lynches Woods Park stress-laminated deck bridge ()
- The Colville Study: wood utilization for ecosystem management: preliminary results of study of product potential from small-diameter stands. ()
- Strength validation and fire endurance of glued-laminated timber beams ()
- Predicting bending strength of fire-retardant-treated plywood from screw-withdrawal tests ()
- Effect of moisture content on warp in hardwood 2 by 6`s for structural use ()
- Field performance of timber bridges. 4, Graves Crossing stress-laminated deck bridge ()
- Lumber and panel products consumption for packaging and shipping in the United States, perspective for the 1980`s ()
- Experimental shear strength of unchecked solid-sawn Douglas-fir ()
- Dowel-nut connection in Douglas-fir peeler cores ()
- Field performance of timber bridges. 6, Hoffman Run stress-laminated deck bridge ()
- Field performance of timber bridges. 12, Christian Hollow stress-laminated box-beam bridge ()
- Field performance of timber bridges. 13, Mohawk Canal stress-laminated bridge ()
- Performance of back-primed and factory-finished hardboard lap siding in southern Florida ()
- United States paper, paperboard, and market pulp capacity trends by process and location, 1970-2000 ()
- Field performance of timber bridges. 15, Pueblo County, Colorado, stress-laminated deck bridge ()
- Environmental impact of preservative-treated wood in a wetland boardwalk. ()
- Role of construction debris in release of copper, chromium, and arsenic from treated wood structures ()
- Field performance of timber bridges. 17, Ciphers stress-laminated deck bridge ()
- Mechanical properties of salvaged dead yellow-cedar in southeast Alaska : Phase I ()
|
|