![](https://webarchive.library.unt.edu/web/20080916181836im_/http://osha.gov/SLTC/etools/respiratory/clearpixel.gif) |
![](https://webarchive.library.unt.edu/web/20080916181836im_/http://osha.gov/SLTC/etools/respiratory/clearpixel.gif) |
|
![](https://webarchive.library.unt.edu/web/20080916181836im_/http://osha.gov/SLTC/etools/respiratory/clearpixel.gif) |
![](https://webarchive.library.unt.edu/web/20080916181836im_/http://osha.gov/SLTC/etools/respiratory/clearpixel.gif) |
![](https://webarchive.library.unt.edu/web/20080916181836im_/http://osha.gov/SLTC/etools/respiratory/clearpixel.gif) |
![](https://webarchive.library.unt.edu/web/20080916181836im_/http://osha.gov/SLTC/etools/respiratory/clearpixel.gif) |
|
The purpose of this
Advisor is to help you comply with the new OSHA respirator standard. This Advisor
will instruct you on the proper selection of respiratory protection and the development of
change schedules for gas/vapor cartridges. This
advisor is in an 800 × 600 format. Depending on your monitor settings, you may need to
"scroll" to display the full width of the pages. (See
Viewing and Printing Tips).
|
|
Keep In Mind
- Respirators should be used for
protection only when engineering controls have been shown to be infeasible for the control
of the hazard or during the interim period when engineering controls are being installed. (See the Exposure Control Priority.)
- Nothing stated in this advisor
modifies the actual requirements of the respirator standard.
- The display or use of particular
products in this advisor is for illustrative purposes only and does not constitute an
endorsement by the U.S. Department of Labor.
|