Most forms are
in pdf format and require Adobe Acrobat Reader or equivalent.
Adobe Acrobat Reader is a FREE program. |
![](https://webarchive.library.unt.edu/web/20080916061109im_/http://www.aqmd.gov/icon/readers/icon-acro.jpg) |
Various coating source specific
rules in the AQMD Rules and Regulations require coatings and adhesives to be
applied by specified methods such as electrostatic spray, high-volume,
low-pressure (HVLP) spray, roll coater, flow coater, dip coater, etc. in
order to maximize the transfer efficiency. Transfer efficiency is typically
defined as the ratio of the weight of coating solids adhering to
an object to the total weight of coating solids
used in the application process, expressed as a percentage. When it comes
to spray applications, the rules typically require the use of either
electrostatic spray equipment or HVLP spray equipment. Other coating
application methods that have been demonstrated to the AQMD to be capable of
achieving either 65 percent transfer efficiency or equivalent or better
transfer efficiency than HVLP spray equipment (depending on the source
specific rule) can also be used after the Executive Officer has given
written approval.
Transfer Efficiency Test Methods
The AQMD has developed two documents to assist individuals who want to
qualify their spray guns as being capable of achieving 65 percent transfer
efficiency or as having equivalent or better transfer efficiency than HVLP
spray equipment. Prior to conducting any transfer efficiency testing, a test protocol must be
prepared, submitted to the AQMD with a Plan Application, and approved by the
AQMD.
Test Methods for Spray Gun Manufacturers
Spray gun manufacturers who want to demonstrate that their spray gun is
equivalent to HVLP spray equipment must use both the test procedure and the equivalency
demonstration guidelines below to demonstrate equivalency.
Guidelines for Demonstrating Equivalency with District Approved Transfer
Efficient Spray Guns (pdf 52 kb)
Spray Equipment Transfer Efficiency Test Procedure for Equipment User
(pdf 62 kb)
Test Methods for Equipment Users
Equipment users who want to demonstrate that a spray gun is capable of
achieving 65 percent transfer efficiency or is equivalent to or better than HVLP
must use this document only.
Spray Equipment Transfer Efficiency Test Procedure for Equipment User
(pdf 62 kb)
Approval Letters for Spray Guns Deemed Equivalent to HVLP
ITW DeVilbiss (Aug 9, 2002)
(pdf 20.5 kb)
SATA (Nov 25, 2003)
(pdf 21.5 kb)
Graco/3M (Jan 21, 2005)
(pdf 20 kb)
ANEST IWATA (Feb 17, 2006)
(pdf 21 kb)
SATA Jet3000 (August
23, 2006) (pdf 21.5 kb)
|