HOME     RESEARCH     PUBLICATIONS     TEACHING     LAB FACILITIES     NEWS     NSF-CAREER     CFS-COMP

  PUBLICATIONS

  Refereed Journal Articles

 (* Corresponding author)

10. Yu, C.*, Yan, W. (2011).  Determining Distortional Buckling Strength of Cold-Formed Steel Flexural C and Z Sections Using Effective Width Method, Elsevier, Thin-Walled Structures. Vol 49, Issue 2, February 2011, Pages 233-238.

9.  Yu, C.*, Xu, K., Sheerah, I. (2011).  Bearing Strength of Cold-Formed Steel Bolted Connections Using Oversized Holes without Washers, ASCE, Journal of Structural Engineering. Vol. 137, Issue 1, 2011.

8.  Yu, C.*, Chen, Y. (2011).  Detailing Recommendations for 1.83-m Wide Cold-Formed Steel Shear Walls with Steel Sheathing, Elsevier, Journal of Constructional Steel Research, 67 (2011) 93-101.

7.  Yu, C.* (2010).  Shear Resistance of Cold-Formed Steel Framed Shear Walls with 0.686-mm, 0.762-mm, and 0.838-mm Steel Sheet Sheathing, Elsevier, Engineering Structures, 32 (2010) 1522-1529.

6.  Yu, C.* (2010).  Distortional Buckling Of Cold-Formed Steel Shear Wall Studs Under Uplift Force, ASCE, Journal of Structural Engineering, 136 (3) 317-323.

5.  Yu, C.*, Schafer, B.W. (2007).  Simulation of Cold-Formed Steel Beams in Local and Distortional Buckling with Applications to the Direct Strength Method, Elsevier, Journal of Constructional Steel Research. 63(5) 581-590.

4.  Yu, C.*, Schafer, B.W. (2007).  Effect of Longitudinal Stress Gradient on the Elastic Buckling of Thin Plates, ASCE, Journal of Engineering Mechanics. 133(4) 452-463.

3.  Yu, C.*, Schafer, B.W. (2006).  Effect of Longitudinal Stress Gradient on the Ultimate Strength of Thin Plates, Elsevier, Thin-Walled Structures. 44 (7) 787-799.

2.  Yu, C.*, Schafer, B.W. (2006).  Distortional Buckling Tests on Cold-Formed Steel Beams, ASCE, Journal of Structural Engineering. 132 (4) 515-528.

1.  Yu, C., Schafer, B.W.* (2003).  Local Buckling Tests on Cold-Formed Steel Beams, ASCE, Journal of Structural Engineering. 129 (12) 1596-1606.

 

  Conference Papers

 (* Presenter)

20. Law, K, Zhao, Y., Yu, C.*, Yan, W. (2011). Simplified Methods for Determining the Critical Elastic Buckling Load of Thin-Walled Cold-Formed Steel Sections, Proceedings of the Annual Stability Conference, Structural Stability Research Council, Pittsburgh, PA, May 2011.

19. Yu, C.*, Chen, Y. (2010).  Experimental Investigation on 6 Feet Wide Cold-Formed Steel Framed Shear Walls with Steel Sheet Sheathing, Proceedings of the 20th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, November 2010.  

18. Yu, C. (2010).  Appropriate Adjustment Method for Experimental Results of Cold-Formed Steel Shear Walls Sheathed with Steel Sheets, Proceedings of the Annual Stability Conference, Structural Stability Research Council, Orlando, FL, May 2010.

17. Moen, C. D.*, Yu, C. (2010).  Elastic Buckling of Thin-Walled Structural Components with Edge-Stiffened Holes, Proceedings of the 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, FL, April 2010.

16. Yu, C.*, Huang, Z., Vora, H. (2009).  Cold-Formed Steel Framed Shear Wall Assemblies with Corrugated Sheet Steel Sheathing, Proceedings of the Annual Stability Conference, Structural Stability Research Council, Phoenix, AZ, April 2009.

15. Vora, H., Yu, C. * (2008).  Pilot Research on Cold-Formed Steel Framed Shear Wall Assemblies with Corrugated Sheet Steel Sheathing, Proceedings of the 19th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, October 2008.

14. Yu, C.* (2008).  Shear Resistance of Cold-Formed Steel Framed Shear Wall Assemblies with 0.027-.0.030-,0.033-inch Sheet Steel Sheathing, Proceedings of the 19th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, October 2008.

13. Yu, C.*, Sheerah, I. (2008).  Cold-Formed Steel Bolted Connections without Washers on Oversized Holes: Shearing and Bearing Failures in Sheets, Proceedings of the 19th International Specialty Conference on Cold-Formed Steel Structures, St. Louis, MO, October 2008.

12. Yu, C*. (2008).  A Unique Buckling Mode for Cold-Formed Steel Framed Shear Wall with Sheet Steel Sheathing, Proceedings of the 5th Conference on Coupled Instabilities in Metal Structures, Sydney, Australia, June 2008.

11. Yu, C*. (2008).  Cold-Formed Steel C-Sections with Edge Stiffened Perforations: Optimization, Behavior, and Design, Proceedings of the 5th International Conference on Thin-walled Structures, Brisbane, Australia, June 2008.

10. Yu, C*. (2008).  A Unique Buckling Mode for Cold-Formed Steel Framed Shear Wall with Sheet Steel Sheathing, Proceedings of the Annual Stability Conference, Structural Stability Research Council, Nashville, TN, April 2008.

9.  Yu, C*. (2007).  Behavior and Design of Cold-Formed Steel Joists with Edge Stiffened Perforations, Proceedings of the Annual Technical Session and Meeting, Structural Stability Research Council, New Orleans, LA, April 2007.

8.  Yu, C*., Schafer, B.W. (2006).  Finite Element Modeling of Cold-Formed Steel Beams: Validation and Application , Proceedings of the 18th International Specialty Conference Cold-Formed Steel Structures, Orlando, FL, October 2006.

7.  Yu, C*., Lokie, T. (2006).  Effective Width Method Based Design for Distortional Buckling of Cold-Formed Steel Beams, Proceedings of the 18th International Specialty Conference Cold-Formed Steel Structures, Orlando, FL, October 2006.

6.  Yu, C*., Schafer, B. W. (2006)  Stability of Thin Plates under Longitudinal Stress Gradient, Proceedings of the Annual Technical Session and Meeting, Structural Stability Research Council, San Antonio, TX, February 2006.

5.  Adany, S.*, Yu, C., Schafer, B. (2005)  Local and Distortional Buckling Resistance of Cold-Formed Steel Beams: Eurocode 3 in the light of (i) Experimental Research and (ii) Other Design Codes, Proceedings of the EUROSTEEL 2005 Conference, Maastricht, Netherlands, June 8 - 10, 2005.

4.  Yu, C.*, Schafer, B.W. (2004).  Distortional Buckling Tests on Cold-Formed Steel Beams, Proceedings of the 17th International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL, 2004.

3.  Yu, C.*, Schafer, B.W. (2004).  Stress Gradient Effect on the Buckling of Thin Plates, Proceedings of the 17th International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL, 2004.

2.  Yu, C., Schafer, B.W.* (2003).  Analysis and Testing of Cold-Formed Steel Beams, Proceedings of the Advances in Structures: Steel, Concrete, Composite and Aluminum - ASSCCA 2003, Sydney, Australia.

1.  Yu, C.*, Schafer, B.W. (2002).  Local Buckling Tests on Cold-Formed Steel Beams, Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, Orlando, FL, 2002.

 

Published Technical Reports

7.  Yu, C., Xu, K. (2010).  Cold-Formed Steel Bolted Connections Using Washers on Oversized and Slotted Holes - Phase 2, Research Report RP10-2 submitted to American Iron and Steel Institute, Washington, DC.

6.  Yu, C., Chen, Y. (2009).  Steel Sheet Sheathing Options for Cold-Formed Steel Framed Shear Wall Assemblies Providing Shear Resistance - Phase 2, Research Report RP09-2 submitted to American Iron and Steel Institute, Washington, DC.

5.  Yu, C., (2008).  Design of Clip Angle Bearing Stiffeners, Technical Note, Cold-Formed Steel Engineers Institute, Wilmington, NC, (Peer Reviewed).

4.  Yu, C. (2008).  Cold-Formed Steel Bolted Connections without Washers on Oversized and Slotted Holes - Phase 1, Research Report RP08-11 submitted to American Iron and Steel Institute, Washington, DC.

3.  Yu, C. (2007).  Steel Sheet Sheathing Options for Cold-Formed Steel Framed Shear Wall Assemblies, Research Report RP07-3 submitted to American Iron and Steel Institute, Washington, DC.

2.  Yu, C., Schafer, B.W. (2005).  Distortional Buckling of Cold-Formed Steel Members in Bending, Research Report RP05-1, American Iron and Steel Institute, Washington, DC.

1.  Schafer, B.W., Yu, C. (2002).  Test Verification of the Effect of Stress Gradient on Webs of Cee and Zee Sections, Research Report RP02-5 submitted to American Iron and Steel Institute, the Metal Building Manufacturers Association.

 

Other Publications

2.  Yu, C. (2008). A State-of-the-Art Structural Testing Laboratory at the University of North Texas, Poster in Texas Section - ASCE Fall 2008 Meeting, Dallas, TX, October 2 - 4, 2008.

1.  Yu, C. (2008). Shear Resistance of Cold-Formed Steel Framed Walls with Sheet Steel Sheathing, Poster in Texas Section - ASCE Spring 2008 Meeting, Corpus Christi, TX, April 23 - 26, 2008.

 

Last updated 04/03/11