Recent Publications

For the complete list, click here.

• “Laser Machining and Fabrication of Materials”, Springer, New York, November 2007, pp. 450, ISBN: 978-0-387-72343-3.
• “Materials Science in Manufacturing”, Academic/Elsevier Press, New York, 2006, pp. 628, ISBN: 0-7506-7716-3.

Monographs

• "Intermetallic and Ceramic Coatings", Marcel Dekker, Inc., New York, January 1999, 504 pp., ISBN: 0-8247-9913-5.
• "Lasers in Surface Engineering", ASM International, Materials Park, Ohio, 628 pp., 1998, ISBN:0-87180-665-2.

Conference Proceedings

• “Surfaces and Interfaces in Nanostructured Materials - II”, The Metallurgical Society of AIME, Warrendale, PA, 2006, pp. 143, ISBN:978-0-87339-626-4.
• “Materials Science in Manufacturing”, Academic/Elsevier Press, New York, 2006, pp. 628, ISBN: 0-7506-7716-3.
• “Surface Engineering in Materials Science III”, The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2005, 358 pp., ISBN:0-87339-590-5.
• “Surfaces and Interfaces in Nanostructured Materials”, The Metallurgical Society of AIME, Warrendale, PA, 2004, pp. 398, ISBN:0-87339-566-2.
• "Heat Treating and Surface Engineering", ASM International, Materials Park, Ohio, 2003, 603 pp., ISBN: 0-87170-797-7
• "Surface Engineering: Coatings and Heat Treatment", ASM International, Materials Park, Ohio, 2003, 730 pp., ISBN:0-87170-781-0.
• “Surface Engineering in Materials Science II”, The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2003, 494 pp., ISBN:0-87339-537-9.
• "Elevated Temperature Coatings: Science and Technology-IV", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2001, 362 pp., ISBN: 0-87339-489-5.
• “Surface Engineering in Materials Science I”, The Metallurgical Society (TMS) of AIME, Warrendale, PA, 2000, 460 pp., ISBN:0-87339-471-2.
• "Elevated Temperature Coatings: Science and Technology-III", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 1999, 424 pp., ISBN:0-87339-421-6.
• "Elevated Temperature Coatings: Science and Technology-II", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 1996, 457 pp., ISBN:0-87339-313-9.
• "Elevated Temperature Coatings: Science and Technology-I", The Metallurgical Society (TMS) of AIME, Warrendale, PA, 1995, 440 pp., ISBN: 0-87339-289-2.

• “A Thermal Model for Laser Interaction with Thick Dielectric Film on Metallic Substrate: Application to Ca-P Layer on Ti Alloy”, Sameer R. Paital and Narendra B. Dahotre, J. Alloys and Compounds, July 28, 2009, doi:10.101016/j.jallcom.2009.07.162.
• “Communication: Faceted Surface Grain Morphology of Rapidly Solidified Alumina: Characterization and Potential Applications", Sandip P. Harimkar, Edward A. Kenik, Sanghoon Shim, and Narendra B. Dahotre, Adv. Eng. Mater., July  13, 2009.
• “Microstructure and Properties  of Spark Plasma Sintering of Fe-Cr-Mo-Y-B-C Bulk Metallic Glass”, Sandip P. Harimkar, Sameer R. Paital, Ashish Singh, Robert Aalund, and Narendra B. Dahotre, J. Non-Crystalline Solids,  July 10, 2009, doi:10.1016/j.jnoncrysol.2009.07.007.
• “Absorptivity Transition in 1.06 μm Wavelength Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Dahotre, Int. J. Appl. Ceramic Technology, April 2009, DOI:10.1111/j.1744-7402.2009.02416.x.
• "Computational Approach to Photonic Drilling of Silicon Carbide" by Anoop N Samant, Claus Daniel, Ron H Chand, Craig A Blue and Narendra B Dahotre, International Journal of Advanced Manufacturing Technology, March 3, 2009, DOI 10.1007/s00170-009-2004-0.
• “Fabrication and Evaluation of Pulse Laser Induced Ca-P Coating on a Ti-alloy for Bioapplication”, Sameer R. Paital, Kantesh Balani, Arvind Agarwal, and Narendra B. Dahotre, Biomedical Materials, doi:10.1088/1748-6041/4/1/015009.

• "Calcium Phosphate Coatings for Bio Implant Applications:  Materials, Performance Factors, and Methodologies", Sameer R. Paital and Narendra B. Dahotre, Materials Science & Engineering – R: Reports, Vol. 66, No. 1-3, pp. 1-70, 2009.
• “In-situ Absorptivity Prediction during 1.06 μm Wavelength Laser Low Aspect Ratio Machining of Structural Ceramics” Anoop N Samant, Baoshuai Du and Narendra B Dahotre, Physica Status Solidi, Vol. 206, No. 7, pp. 1433-1439, 2009.
• “Wettability and Kinetics of Hydroxyapatite Precipitation on Laser Textured Ca-P Bioceramic Coating”, Sameer R. Paital and Narendra B Dahotre, Acta Biomaterialia, Vol. 5, No. 7, pp. 2763-27772, 2009.
• “Laser Surface Cladding of MRI 153M Magnesium Alloy with (Al+Al2O3)”, M. Hazra, A. K. Mondal, S. Kumar, C. Blawert, and Narendra. B. Dahotre, Surface and Coating Technology, Vol. 203, No. 16, pp. 2292-2299, 2009.
• “Pulsed Laser Surface Treatment of Magnesium: Correlation between Thermal Model and Experimental Observations” , Anoop N. Samant, Baoshuai Du, Sameer R. Paital, Subodh Kumar, and Narendra B. Dahotre, J. Materials Processing Technology, Vol. 209, No. 11, pp. 5060-5067,2009
• “Rapid Surface Microstructuring of Porous Alumina Ceramic Using Continuous Wave Nd:YAG Laser”, Sandip P Harimkar, Narendra B Dahotre, J. Materials Processing Technology, Vol. 209, No. 10, pp. 4744-4749, 2009..
• "Laser Surface Multilevel Self Assembly of CaP-TiO2 Particles" Anil K. Kurella, Anoop N Samant, and Narendra B Dahotre, Journal of Applied Physics, Vol. 29, No. 6, pp. 969-993, 2009.
• “Laser Machining of Structural Ceramics: A Review”, Anoop N. Samant and Narendra B. Dahotre, Journal of European Ceramic Society, Vol. 29, No. 6, pp. 969-993, 2009.
• “Laser Melting of Plasma Sprayed Aluminum Oxide Coatings Reinforced with Carbon Nanotubes”, Y. Chen, A. Samant, K. Balani, Narendra B. Dahotre, A. Agarwal, Applied Physics-A: Materials Science & Processing, Vol. 94, No. 4, pp 861-870, 2009.
• “An Integrated Computational Approach to Single Dimensional Laser Machining of Magnesia” Anoop N. Samant, and Narendra B. Dahotre, Optics and Lasers in Engineering, Vol. 47, No. 5, pp. 570-577, 2009.
• “ Differences in Physical Phenomena Governing Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Dahotre, Ceramic International, Vol. 35, No. 5, pp. 2093-2097, 2009.
• “Physical Effects of Multipass Two-Dimensional Laser Machining of Structural Ceramics”, Anoop N. Samant and Narendra B. Daotre, Adv. Eng. Materials, Vol. 11, No. 7, pp. 579-585, 2009.
• “Pulsed Laser Synthesis of Ceramic-Metal Composite Coating on Steel”, Baoshuai Du, Anoop N. Samant, Sameer R. Paital, and Narendra B. Dahotre, Applied Surface Science, Vol. 255, pp. 3188-3194, 2008.
• “Multiscale Wear of Plasma-sprayed Carbon-nanotube-reinforced Aluminum Oxide Nanocomposite Coating”, Kantesh Balani, Sandip P. Harimkar, Anup Keshri, Yao Chen, Narendra B. Dahotre, Arvind Agarwal, Acta Materialia, Vol. 56, pp. 5984-5894, 2008.
• “Laser Based Biomimetic and Bioactive Coatings”, Sameer R. Paital and Narendra B. Dahotre, Materials Science and Technology, Vol. 24, No. 9, pp. 1144-1161, 2008.
• “Phase Constituents and Microstructure of Laser Synthesized TiB2-TiC Reinforced Composite Coating on Steel”, Baoshuai Du and Narendra B. Dahotre, Scripta Materialia, Vol. 59, pp. 1147-1150, 2008.
• “Computational Predictions in Single-Dimensional Laser Machining of Alumina”, Anoop N. Samant and Narendra B. Dahotre, International Journal of Machine Tools & Manufacture, Vol. 48, No. 12-13, pp. 1345-1353, 2008.
• “Ab initio Physical Analysis of Single Dimensional Laser Machining of Silicon Nitride”, Anoop N. Samant and Narendra B. Dahotre, Advanced Engineering Materials, Vol. 10, No. 10, pp. 978-981, 2008.
• “Controlled Evolution of Morphology and Microstructure in Laser Interference Structured Zirconia”, Claus Daniel, Beth L. Armstrong, Narendra B. Dahotre, J. Amer. Ceram. Soc., Vol. 91, No. 7, pp. 2138-2142, 2008.
• “Process Optimization in Laser Surface Structuring of Alumina”, Anoop N. Samant, Sameer R. Paital and Narendra B. Dahotre, J. Mater. Proc. Tech., No. 203, pp. 498-504, 2008.
• “Microindentation Fracture Behavior of Laser Surface Modified Alumina Ceramic”, Sandip P. Harimkar and Narendra B. Dahotre, Scripta Materialia, No. 58, pp. 545-548, 2008.
• “Effect of Microstructural Evolution on Wettability of Laser Coated Calcium Phosphate on Titanium Alloy”, Anil K. Kurella, Michael Z. Hu, and Narendra B. Dahotre, Materials Science and Engineering -C: Biomimetic Materials, Sensors and Systems, Vol. 28, No. 8, pp. 1560-1564,2008.
• “Effect of Laser Surface Treatment on Corrosion and Wear Resistance of ACM720 Mg Alloy”, A. K. Mondal, S. Kumar, C. Blawert and Narendra B. Dahotre, Surface & Coatings Technology, Vol. 202, pp. 3187-3198, 2008.
• “Multilevel Residual Stress Evaluation in Laser Surface Modified Alumina”, Anoop N. Samant1, and Narendra B. Dahotre, Applied Physics A: Materials Science & Processing, Vol. 90, pp. 493-499, 2008.
• “Laser Surface Processing of Ti6Al4V in Gaseous Nitrogen: Corrosion Performance in Physiological Solution”, Raghuvir Singh, S. Ghosh Chowdhury, S. K. Tiwari and Narendra B. Dahotre, J. Mater. Sci: Mater. Med., Vol. 19, pp. 1363-1369, 2008.
• “Influence of Laser Fluence on the Microstructure Evolution and Fractal Dimensions of Laser Surface Modified Alumina Ceramic”, Sandip P. Harimkar and Narendra B. Dahotre, Materials Characterization, Vol. 59, pp. 700-707, 2008.