Main Departmental Office
North Texas Research Park, Room F115
P.O. Box 310679
Denton, TX 76203-0679
(940) 565-2022
Fax: (940) 565-2666
E-mail: etec@unt.edu
Web site: www.etec.unt.edu
Professors: Grubbs, Mirshams. Associate Professors: Foster, Kozak, Nasrazadani, Plummer. Assistant Professors: Kougianos, Smith, Vaidyanathan, Wang, Yu. Lecturers: Anaya, Baatarjav, Bittle, Nouri.
Engineering technology is the profession in which a knowledge of mathematics and natural sciences gained by higher education, experience and practice is devoted primarily to the implementation and extension of existing technology for the benefit of humanity (Engineering Technology Council, 1994). Increasing technological aspects of all modern activities have led to the need for highly skilled persons to design, construct, install, maintain, manage, operate, produce and sell sophisticated technical systems and products.
Departmental programs emphasize the application of theoretical concepts. Classes of carefully coordinated laboratory experiences and lectures are utilized. Courses emphasize theoretical concepts and principles for solutions applicable to modern technological problems. Students are prepared for rapidly changing life experiences with mathematics, science and general education. This preparation is designed to enable graduates to remain current, as well as advance, in their professional field.
The department offers undergraduate and graduate programs in the following areas:
Nuclear engineering technology is available at the TXU Comanche Peak Steam Electric Station.
The construction engineering technology major provides educational experiences for the development of technical knowledge and skills necessary in today’s construction industry. The program provides education in both the management and technical aspects, thus providing optimum opportunities for employment. The program builds on a strong foundation in mathematics, science, engineering and general education. Knowledge and skills relative to the construction field such as surveying, cost estimating, construction materials, computer design, contracts and management, safety, and structures are acquired. Technical and management skills are enhanced through courses offered by other engineering technology programs and the College of Business Administration. The development of technical communication and presentation skills is a requirement throughout the curriculum.
The electronics engineering technology major is designed to develop the technical and personal knowledge and skill necessary to compete successfully in today’s electronics industry. The program builds on a strong foundation in mathematics and science and includes courses in network analysis, linear electronics, digital electronics, communication systems and control systems. Computer utilization is an integral part of all electronics courses and most courses include a laboratory to provide the necessary hands-on experience for an applied program of study. The student’s technical background is further enhanced by taking selected courses from other engineering technology concentrations. The development of technical communication and presentation skills is a requirement throughout the curriculum.
Electronics engineering technology is accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology [Accreditation Director for Engineering Technology, Accreditation Board for Engineering and Technology, 111 Market Place, Suite 1050, Baltimore, MD 21202; (410) 347-7700].
The manufacturing engineering technology major prepares students for professional careers in the manufacturing environment. Manufacturing engineering technologists apply scientific and engineering knowledge and methods in support of engineering activities. While manufacturing engineering technologists share much of the mathematics and science background of engineers, their academic preparation tends to emphasize technical skills and applications resulting in a practical orientation. The major thrust of the manufacturing engineering technology curriculum is that of factory automation. Graduates commonly take positions in research and development, process specification and design, reliability/quality assurance and tool design.
Manufacturing engineering technology is accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology [Accreditation Director for Engineering Technology, Accreditation Board for Engineering and Technology, 111 Market Place, Suite 1050, Baltimore, MD 21202; (410) 347-7700].
The mechanical engineering technology is built upon a strong foundation of science, mathematics and technical course work designed to meet the diverse needs of the mechanical designer. Mechanical engineering technology concepts are used in all types of industry and are applied directly to product and tool design and to assist in the manufacturing process. Courses in computer-aided design, product design and development, manufacturing processes and materials, strength of materials and quality assurance provide the student with a broad range of applications for the pursuit of a career in mechanical engineering technology.
Mechanical engineering technology is accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology [Accreditation Director for Engineering Technology, Accreditation Board for Engineering and Technology, 111 Market Place, Suite 1050, Baltimore, MD 21202; (410) 347-7700].
The nuclear engineering technology major is designed to provide breadth of training for operators and related technical personnel at the TXU Comanche Peak Steam Electric Station. The program has a strong foundation in mathematics and science and adds nuclear engineering principles ranging from materials science to reactor design. Courses in fluid mechanics, thermodynamics, electrical circuit theory, electric power generation and automatic control systems augment the curriculum. The program enhances the reactor operator training provided by TXU by stressing the fundamentals of underlying physical and engineering principles behind many plant operating procedures.
Nuclear engineering technology is accredited by the Technology Accreditation Commission of the Accreditation Board for Engineering and Technology [Accreditation Director for Engineering Technology, Accreditation Board for Engineering and Technology, 111 Market Place, Suite 1050, Baltimore, MD 21202; (410) 347-7700].
1. Hours Required and General/College Requirements: A minimum of 128 semester hours, of which 42 must be advanced, and fulfillment of degree requirements for the Bachelor of Science degree as specified in the “General University Requirements” in the Academics section of this catalog and the College of Engineering requirements.
2. Major Requirements: 68 hours from one of four majors listed below, chosen with the advice of an academic adviser within the department.
Major in Construction Engineering Technology (68 hours): CNET 1160, 2180, 2300, 3150, 3160, 3190, 3410, 3420, 3440, 3460, 3480, 4170, 4180, 4620, 4780 and 4790; CSCE 1020; ENGR 2301 and 2332; ACCT 2020; BLAW 4600, 4770; ECON 1100.
Major in Electronics Engineering Technology (68 Hours): ELET 3700, 3720, 3740, 3750, 3760, 4710, 4720, 4770, 4780 and 4790; ENGR 2405, 2720 and 2750; MFET 4190; CSCE 1020; plus 6 hours of technical electives and 3 advanced hours of technical options.
Major in Manufacturing Engineering Technology (68 Hours): MFET 2100, 3110, 3250, 3450, 3520, 4190, 4200, 4210, 4230, 4780 and 4790; ENGR 1304, 2301, 2332, 2405; MEET 3650, 3660, 4360; ELET 3970; MGMT 3830; CSCE 1020; plus 3 hours of technical elective.
Major in Mechanical Engineering Technology (68 Hours): MEET 3650, 3940, 3990, 4050, 4350, 4360, 4780 and 4790; ENGR 1304, 2301, 2302, 2332, 2405; MFET 2100, 3110, 3450, 4190, 4200 and 4210; ELET 3970; CSCE 1020; plus 4 hours of advanced electives.
Major in Nuclear Engineering Technology (68 Hours): NUET 3910, 3920, 3930, 4050, 4780, 4790 and 4930; ENGR 2301, 2405; ELET 3970, 4940; MEET 3940 and 3990; MFET 4190; MATH 1680; CSCE 1020; plus 3 hours of technical elective and 14 hours (8 advanced) of technical options approved by adviser.
3. Other Course Requirements: MATH 1650, 1710 and 1720. Students registering for fall or spring term/semester must register for mathematics until the requirement has been satisfied, unless approved by the department chair. A minimum of 12 semester hours of mathematics is required.
4. Minor: Optional.
5. Electives: See four-year plan.
6. Other Requirements:
a. GNET 1030 (may be used to satisfy the Social and Behavioral Sciences requirement of the University Core Curriculum).
b. ENGR 2060 (may be used to satisfy the Communications requirement of the University Core and College of Engineering Core).
c. PHYS 1710/1730 and 2220/2240 and CHEM 1410/1430 (may be used to satisfy the Natural Sciences requirement of the University Core Curriculum).
d. ENGL 2700 is required instead of ENGL 1320.
e. A 2.5 GPA is required for engineering technology courses in the area of concentration.
f. Courses taken to satisfy the technical options in each concentration must be approved by the academic adviser.
Following is one suggested four-year degree plan. Students are encouraged to see their adviser each semester for help with program decisions and enrollment. Students are responsible for meeting all course prerequisites.
| Course | Hours |
|---|---|
| CHEM 1410, General Chemistry** | 3 |
| CHEM 1430, General Chemistry Laboratory** | 1 |
| CNET 1160, Construction Methods and Materials | 3 |
| ENGL 1310, College Writing I* | 3 |
| GNET 1030, Technological Systems (may be used to satisfy Social and Behavioral Science requirement*) | 3 |
| Total MATH 1650, Pre-Calculus | 5 |
| Total | 18 |
| Course | Hours |
|---|---|
| CSCE 1020, Program Development | 4 |
| ECON 1100, Microeconomics | 3 |
| MATH 1710, Calculus I** | 4 |
| PHYS 1710, Mechanics** | 3 |
| PHYS 1730, Laboratory in Mechanics** | 1 |
| Wellness* | 3 |
| Total | 18 |
| Course | Hours |
|---|---|
| ACCT 2010, Accounting Principles I | 3 |
| CNET 2180, Construction Methods and Surveying | 4 |
| CNET 2300, Architectural Drawing | 2 |
| ENGL 2700, Technical Writing* | 3 |
| ENGR 2301, Statics | 3 |
| MATH 1720, Calculus II | 3 |
| Total | 18 |
| Course | Hours |
|---|---|
| ENGR 2060, Professional Presentations (may be used to satisfy Communication requirement**) | 3 |
| ENGR 2332, Mechanics of Materials | 4 |
| HIST 2610, United States History to 1865* | 3 |
| PHYS 2220, Electricity and Magnetism | 3 |
| PHYS 2240, Laboratory in Wave Motion, Electricity, Magnetism and Optics | 1 |
| Cross-Cultural, Diversity and Global Studies* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| CNET 3150, Construction Contract Documents | 2 |
| CNET 3160, Construction Cost Estimating | 3 |
| CNET 3410, Occupational Safety and Liability | 3 |
| CNET 3430, Structural Analysis | 3 |
| PSCI 1040, American Government I* | 3 |
| Humanities* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| CNET 3190, Construction Scheduling | 3 |
| CNET 3440, Steel Structures | 3 |
| CNET 3460, Soils and Foundations | 3 |
| PSCI 1050, American Government II* | 3 |
| Visual and Performing Arts* | 3 |
| Total | 15 |
| Course | Hours |
|---|---|
| BLAW 4600, Current Topics in Business Law | 3 |
| CNET 3480, Structural Design with Concrete, Timber and other Materials | 3 |
| CNET 4170, Construction Management | 3 |
| CNET 4780, Senior Design I | 2 |
| HIST 2620, United States History Since 1865* | 3 |
| Total | 14 |
| Course | Hours |
|---|---|
| BLAW 4770, Real Estate Law and Contracts | 3 |
| CNET 4180, Problems in Project Management | 3 |
| CNET 4620, Advanced Design in Cold-Formed Steel Structures | 3 |
| CNET 4790, Senior Design II | 2 |
| Total | 11 |
* See the University Core Curriculum section of this catalog for approved list of course options.
** See College of Engineering degree requirements section of this catalog for approved list of course options.
Actual degree plans may vary depending on availability of courses in a given semester. Some courses may require prerequisites not listed.
Following is one suggested four-year degree plan. Students are encouraged to see their adviser each semester for help with program decisions and enrollment. Students are responsible for meeting all course prerequisites.
| Course | Hours |
|---|---|
| CHEM 1410, General Chemistry** | 3 |
| CHEM 1430, General Chemistry Laboratory** | 1 |
| ENGL 1310, College Writing I* | 3 |
| MATH 1650, Pre-Calculus | 5 |
| PSCI 1040, American Government I* | 3 |
| Wellness* | 3 |
| Total | 18 |
| Course | Hours |
|---|---|
| CSCE 1020, Program Development | 4 |
| ENGL 2700, Technical Writing* | 3 |
| HIST 2610, United States History to 1865* | 3 |
| MATH 1710, Calculus I** | 4 |
| Humanities* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| ENGR 2060, Professional Presentations (may be used to satisfy Communication requirement**) | 3 |
| ENGR 2405, Fundamentals of Electrical Engineering | 4 |
| ENGR 2720, Digital Logic | 4 |
| MATH 1720, Calculus II** | 3 |
| PHYS 1710, Mechanics** | 3 |
| PHYS 1730, Laboratory in Mechanics** | 1 |
| Total | 18 |
| Course | Hours |
|---|---|
| ENGR 2750, Introduction to Microprocessors | 4 |
| GNET 1030, Technological Systems (may be used to satisfy the Social and Behavioral Sciences requirement*) | 3 |
| PHYS 2220, Electricity and Magnetism | 3 |
| PHYS 2240, Laboratory in Wave Motion,Electricity, Magnetism and Optics* | 1 |
| PSCI 1050, American Government* | 3 |
| Visual and Performing Arts* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| ELET 3700, Circuit Analysis | 4 |
| ELET 3720, Electronics I | 4 |
| ELET 3750, Digital Systems | 4 |
| Technical Elective | 3 |
| Total | 15 |
| Course | Hours |
|---|---|
| ELET 3740, Electronics II | 4 |
| ELET 3760, Design of DSP Systems | 4 |
| HIST 2620, United States History Since 1865* | 3 |
| Cross-Cultural, Diversity and Global Studies* | 3 |
| Technical Option (advanced) | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| CSCE 4730, VLSI Design | 3 |
| ELET 4710, High Frequency Systems I | 4 |
| ELET 4720, Control Systems | 4 |
| ELET 4780, Senior Design I | 2 |
| Total | 13 |
| Course | Hours |
|---|---|
| ELET 4770, High Frequency Systems II | 4 |
| ELET 4790, Senior Design II | 2 |
| MFET 4190, Quality Assurance | 3 |
| Technical Option (advanced) | 3 |
| Total | 12 |
* See the University Core Curriculum section of this catalog for approved list of course options.
** See College of Engineering degree requirements section of this catalog for approved list of course options.
Actual degree plans may vary depending on availability of courses in a given semester. Some courses may require prerequisites not listed.
Following is one suggested four-year degree plan. Students are encouraged to see their adviser each semester for help with program decisions and enrollment. Students are responsible for meeting all course prerequisites.
| Course | Hours |
|---|---|
| CHEM 1410, General Chemistry** | 3 |
| CHEM 1430, General Chemistry Laboratory** | 1 |
| ENGL 1310, College Writing I* | 3 |
| ENGR 1304, Engineering Graphics | 3 |
| MATH 1650, Pre-Calculus | 5 |
| PSCI 1040, American Government* | 3 |
| Total | 18 |
| Course | Hours |
|---|---|
| ENGL 2700, Technical Writing* | 3 |
| GNET 1030, Technological Systems (may be used to satisfy Social and Behavioral Sciences requirement*) | 3 |
| MATH 1710, Calculus I** | 4 |
| PHYS 1710, Mechanics** | 3 |
| PHYS 1730, Laboratory in Mechanics** | 1 |
| Wellness* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| CSCE 1020, Program Development | 4 |
| ENGR 2060, Professional Presentations (may be used to satisfy Communication requirement**) | 3 |
| ENGR 2301, Statics | 3 |
| ENGR 2405, Fundamentals of Electrical Engineering | 4 |
| MATH 1720, Calculus II** | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| ENGR 2332, Mechanics of Materials | 4 |
| MFET 2100, Manufacturing Processes and Materials | 3 |
| PHYS 2220, Electricity and Magnetism** | 3 |
| PHYS 2240, Laboratory in Wave Motion, Electricity, Magnetism and Optics** | 1 |
| PSCI 1050, American Government* | 3 |
| Humanities* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| HIST 2610, United States History to 1865* | 3 |
| MEET 3660, Applications in Thermal Sciences | 3 |
| MFET 3110, Machining Principles and Processes | 4 |
| MFET 3250, Plastic Materials and Processes | 3 |
| MFET 3450, Engineering Materials | 4 |
| Total | 17 |
| Course | Hours |
|---|---|
| ELET 3970, Electronic Devices and Controls | 3 |
| MEET 3650, Design of Mechanical Components | 3 |
| MEET 4360, Experimental Thermal Sciences | 2 |
| MFET 4190, Quality Assurance | 3 |
| MFET 4210, CAD/CAM System Operations | 3 |
| MGMT 3830, Operations Management | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| MFET 3520, Soldering, Brazing and Adhesive Bonding | 3 |
| MFET 4200, Engineering Cost Analysis | 2 |
| MFET 4230, CNC Programming and Operation | 4 |
| MFET 4780, Senior Design I | 2 |
| Visual and Performing Arts* | 3 |
| Total | 14 |
| Course | Hours |
|---|---|
| HIST 2620, United States History Since 1865* | 3 |
| MFET 4790, Senior Design II | 2 |
| Cross-Cultural, Diversity and Global Studies* | 3 |
| Technical Option | 3 |
| Total | 11 |
* See the University Core Curriculum section of this catalog for approved list of course options.
** See College of Engineering degree requirements section of this catalog for approved list of course options.
Actual degree plans may vary depending on availability of courses in a given semester. Some courses may require prerequisites not listed.
Following is one suggested four-year degree plan. Students are encouraged to see their adviser each semester for help with program decisions and enrollment. Students are responsible for meeting all course prerequisites.
| Course | Hours |
|---|---|
| CHEM 1410, General Chemistry** | 3 |
| CHEM 1430, General Chemistry Laboratory** | 1 |
| ENGL 1310, College Writing I* | 3 |
| ENGR 1304, Engineering Graphics | 3 |
| MATH 1650, Pre-Calculus | 5 |
| PSCI 1040, American Government* | 3 |
| Total | 18 |
| Course | Hours |
|---|---|
| ENGL 2700, Technical Writing* | 3 |
| GNET 1030, Technological Systems (may be used to satisfy Social and Behavioral Sciences requirement*) | 3 |
| MATH 1710, Calculus I | 4 |
| PHYS 1710, Mechanics** | 3 |
| PHYS 1730, Laboratory in Mechanics** | 1 |
| Wellness* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| CSCE 1020, Program Development | 4 |
| ENGR 2060, Professional Presentations (may be used to satisfy Communication requirement**) | 3 |
| ENGR 2301, Statics | 3 |
| ENGR 2405, Fundamentals of Electrical Engineering | 4 |
| MATH 1720, Calculus II** | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| ENGR 2302, Dynamics | 3 |
| ENGR 2332, Mechanics of Materials | 4 |
| MFET 2100, Manufacturing Processes and Materials | 3 |
| PHYS 2220, Electricity and Magnetism** | 3 |
| PHYS 2240, Laboratory in Wave Motion, Electricity, Magnetism and Optics** | 1 |
| Humanities* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| HIST 2610, United States History to 1865* | 3 |
| MEET 3940, Fluid Mechanics Applications | 3 |
| MFET 3110, Machining Principles and Processes | 4 |
| MFET 3450, Engineering Materials | 3 |
| Cross-cultural, Diversity and Global Studies* | 3 |
| Total | 16 |
| Course | Hours |
|---|---|
| ELET 3970, Electronic Devices and Controls | 3 |
| MEET 3650, Design of Mechanical Components | 3 |
| MEET 3990, Applied Thermodynamics | 3 |
| MFET 4190, Quality Assurance | 3 |
| MFET 4210, CAD/CAM System Operations | 3 |
| PSCI 1050, American Government* | 3 |
| Total | 18 |
| Course | Hours |
|---|---|
| MEET 4050, Mechanical Design | 3 |
| MEET 4350, Heat Transfer Applications | 3 |
| MEET 4780, Senior Design I | 2 |
| MFET 4200, Engineering Cost Analysis | 2 |
| Visual and Performing Arts* | 3 |
| Total | 13 |
| Course | Hours |
|---|---|
| HIST 2620, United States History Since 1865* | 3 |
| MEET 4360, Experimental Thermal Sciences | 2 |
| MEET 4790, Senior Design II | 2 |
| Technical Option (advanced) | 4 |
| Total | 11 |
* See the University Core Curriculum section of this catalog for approved list of course options.
** See College of Engineering degree requirements section of this catalog for approved list of course options.
Actual degree plans may vary depending on availability of courses in a given semester. Some courses may require prerequisites not listed.
Following is one suggested four-year degree plan. Students are encouraged to see their adviser each semester for help with program decisions and enrollment. Students are responsible for meeting all course prerequisites.
| Course | Hours |
|---|---|
| CSCE 1020, Program Development | 4 |
| ENGL 1310, College Writing I* | 3 |
| HIST 2610, United States History to 1865* | 3 |
| MATH 1650, Pre-Calculus | 5 |
| Total | 15 |
| Course | Hours |
|---|---|
| CHEM 1410, General Chemistry** | 3 |
| CHEM 1430, General Chemistry Laboratory** | 1 |
| ENGL 2700, Technical Writing* | 3 |
| HIST 2620, United States History Since 1865* | 3 |
| MATH 1710, Calculus I** | 4 |
| Cross-Cultural, Diversity and Global Studies* | 3 |
| Total | 17 |
| Course | Hours |
|---|---|
| GNET 1030, Technological Systems (may be used to satisfy Social and Behavioral Sciences requirement*) | 3 |
| ENGR 2060, Professional Presentations (may be used to satisfy Communication requirement**) | 3 |
| MATH 1720, Calculus II** | 3 |
| PHYS 1710, Mechanics** | 3 |
| PHYS 1730, Laboratory in Mechanics** | 1 |
| Humanities* | 3 |
| Total | 16 |
| Course | Hours |
|---|---|
| ENGR 2301, Statics | 3 |
| MATH 1680, Elementary Probability and Statistics | 3 |
| PHYS 2220, Electricity and Magnetism** | 3 |
| PHYS 2240, Laboratory in Wave Motion, Electricity, Magnetism and Optics** | 1 |
| PSCI 1040, American Government* | 3 |
| Technical Elective | 3 |
| Total | 16 |
| Course | Hours |
|---|---|
| ENGR 2405, Fundamentals of Electrical Engineering | 4 |
| MFET 4190, Quality Assurance | 3 |
| NUET 3910, Principles of Nuclear Technology | 3 |
| Technical Option | 3 |
| Wellness* | 3 |
| Total | 16 |
| Course | Hours |
|---|---|
| ELET 3970, Electronic Devices and Controls | 3 |
| MEET 3990, Applied Thermodynamics | 3 |
| NUET 3920, Nuclear Instrumentation and Measurement | 4 |
| PSCI 1050, American Government* | 3 |
| Technical Option (advanced) | 3 |
| Total | 16 |
| Course | Hours |
|---|---|
| ELET 4940, Electrical Power Generation and Transmission | 3 |
| MEET 3940, Fluid Mechanics Applications | 3 |
| NUET 3930, Radiation Biology and Safety | 4 |
| NUET 4050, Nuclear Reactor Theory | 3 |
| NUET 4780, Senior Design I | 2 |
| Total | 15 |
| Course | Hours |
|---|---|
| NUET 4790, Senior Design II | 2 |
| NUET 4930, Reactor Engineering Design and Operation | 4 |
| Technical Option | 3 |
| Technical Option (advanced) | 4 |
| Visual and Performing Arts* | 3 |
| Total | 16 |
* See the University Core Curriculum section of this catalog for approved list of course options.
** See College of Engineering degree requirements section of this catalog for approved list of course options.
Actual degree plans may vary depending on availability of courses in a given semester. Some courses may require prerequisites not listed.
The minor in general engineering technology requires 18 semester hours (6 advanced), chosen with approval of the engineering technology department chair.
The Master of Science with a major in engineering technology is available at the graduate level. Prospective students should consult with the graduate departmental adviser prior to initial enrollment.
The department offers scholarships designated specifically for studies in engineering technology. For further information, inquire in the departmental office.
All Courses of Instruction are located in one section at the back of this catalog.
The “Course and Subject Guide,” found in the Courses of Instruction section of this book, serves as a table of contents and provides quick access to subject areas and prefixes.
Date of initial release: July 1, 2006 — Copyright © 2006 University of North Texas
Page updated:
June 15, 2006
— Comments or corrections: catalog@unt.edu
UNT · Search UNT · UNT News · UNT Events
“University of North Texas,” “UNT” and “Discover the power of ideas” are officially registered trademarks of the University of North Texas; their use by others is legally restricted. If you have questions about using any of these marks, please contact the UNT Division of University Relations, Communications and Marketing at (940) 565-2108 or e-mail branding@unt.edu.
(800) UNT-8211
(868-8211) (toll-free)
undergrad@unt.edu
(940) 565-2000
Schedule a tour online
(940) 565-4104