Geochemical and Microbiological Processes that Affect Migration and Natural Attenuation of Chlorinated Solvents in
Fractured Sedimentary Rock
CLICK PHOTOS FOR AN ENLARGED VERSION
|
USGS scientists installing diffusion samplers and microcosms (circa 2005) to study
subsurface bacteria that degrade trichloroethylene (TCE). The sample devices were placed in wells at the site and
will be recovered one year later. Analysis of the samplers will help USGS and U.S. Navy scientists evaluate the
performance of a biostimulation and bioaugmentation experiment designed to bioremediate contaminants in fractured
rock
|
The syringes strapped to the sided of the packer pipe rod are for measuring
concentrations of dissolved hydrogen gas. USGS scientists are testing two different syringe materials in order to
determine which is best suited for long-term diffusion sampling in trichloroethylene-contaminated fractured rock
aquifers
|
Drilling operations at the site (circa 2005). Samples of rock core were collected
and were analyzed for concentrations of volatile organic compounds (VOC's at
about 50 different depths, providing a direct measure of the contaminant concentrations in the rock matrix
|
The bottom of the 4-inch coring bit (May 2005) used to collect core from land
surface to a depth of about 170 feet. One use of many for the cores was to provide direct information on the geology
and hydrogeology of the fractured bedrock at the site
|
USGS scientists processed cores for later analysis of trichloroethylene (TCE),
dichloroethylene (DCE), and vinyl chloride in the cores (circa 2005). A blue tarp was laid on the ground to capture
any spills of potentially contaminated materials from the core
|
USGS scientists processing a bedrock core taken from the site (circa 2005). The
core was sampled near fractures and the rock matrix was analyzed for volatile organic compounds (VOC's)
|
A close-up of a fracture cutting through a core that was collected from the site
(circa 2005). Fractures such as this one control the migration of contaminants at the site. Note the rough texture of
the surface of the fracture
|
To avoid cross contamination during sampling, the drilling and sampling equipment
was steam cleaned (circa 2005)
|
A close-up view of a heat-pulse flow-meter tool. The tool was used to determine
the vertical flow-rate of ground water in boreholes at the site. This information is used to determine the hydraulic
properties of fractures during ambient and pumping conditions
|
A ribbon NAPL sample cloth used to detect
the presence of separate phase trichloroethylene (DNAPL) in boreholes
(circa 2005). The cloth was stained when pure trichloroethylene and methanol was applied in the lab during a test of
the technology
|
USGS scientists connecting tubing to the Bedrock-Aquifer Transportable Testing Tool (BAT3). The BAT3 was
used to conduct hydraulic tests on fractures and to collect water samples from fractures for chemical analysis (circa
2005)
|
USGS scientists collecting water samples for chemical analysis and measuring pH,
specific conductance, and other field parameters of water pumped from a well (not in photo). The water sample was
analyzed for contaminants such as volatile organic compounds (circa 2005)
|
USGS scientists conducted outcrop studies in 2003 and 2004 to gather information
on the pattern of fracturing and its correlation with rock type in the rocks around the site. This information was
used to better understand the migration of the trichloroethylene (TCE) plume at the site
|
The Lockatong Formation, a cyclically deposited mudstone, is the host rock for the
trychloroetylene (TCE) plume at the site. The formation is characterized by bedding-controlled fracturing as well as
strata bound high-angle jointing
|
A view of a mudstone of the Lockatong Formation, showing bedding (dipping gently
to the left of the picture), bedding-plane parting fractures, and strata bound vertical jointing (rock face just to
left of the hammer). Fractures such as these control the transport of trichloroethylene (TCE) at the site
|
In 2004, USGS drillers cored a hole just east of the site to constrain the
location of a fault that passes through the site, and to better understand its geologic and hydrogeologic properties.
The fault zone impedes the flow of ground water and is a major control on the ground-water flow system at the
site
|
Rock core of the heavily faulted Stockton Formation retrieved from a
northeast-trending fault zone. The fault zone passes through the southeast corner of the site, separating the
Stockton on the southeast from the Lockatong Formation on the northwest. The fault zone acts as a barrier to
trichloroethylene (TCE) migration
|
A close-up of the fault-zone core showing open joints perpendicular to bedding in
the Stockton Formation sandstone. This core along with others was used to more accurately map the location of the
fault zone. Fractures in the core yield clues to the 3-dimentional orientation of the fault and its direction of
movement
|
The Naval Air Warfare Center (NAWC) was originally a jet engine testing facility.
The site is now used to study the fate of trichloroethylene (TCE) in fractured rock
|
Jet engine testing equipment at the site was cooled with trichloroethylene (TCE).
The site is now used to study the fate of TCE that leaked into fractured rock
|
Historical photo of the site during construction (circa 1950’s)
|
Aerial view of the Naval Air Warfare Center, NJ, when it was operating
|
View of the area above the plume of trichloroethylene in fractured sedimentary
rock
|
Above-ground trichloroethylene (TCE) pipes at the site. TCE was used as a coolant
in the jet-engine testing equipment at the site. The pipes were cut during remedial activities
|