Control banding (CB) is a technique used to guide the assessment and management of workplace risks. It is a generic technique that determines a control measure (for example dilution ventilation, engineering controls, containment, etc.) based on a range or “band” of hazards (such as skin/eye irritant, very toxic, carcinogenic, etc) and exposures (small, medium, large exposure). It is an approach that is based on two pillars; the fact that there are a limited number of control approaches, and that many problems have been met and solved before. CB uses the solutions that experts have developed previously to control occupational chemical exposures, and suggesting them to other tasks with similar exposure situations. It is an approach that focuses resources on exposure controls and describes how strictly a risk needs to be managed. NIOSH considers CB a potentially useful tool for small businesses.
Control banding must be used in conjunction with health and safety practices such as substitution. Substitution for a less hazardous chemical is still highly recommended to prevent exposure. It is important to note that Control Banding is NOT a replacement for experts in occupational safety and health nor does it eliminate the need to perform exposure monitoring. CB highly recommends the use of professionals to provide recommendations. The fourth band specifically recommends seeking professional assistance for highly hazardous exposures. Furthermore, CB recommends exposure monitoring to follow the CB intervention to ensure the installed controls are working properly.
International Control Banding Workshops, Symposia, and Presentations
Control Banding: Does the Model Work
Workshop was conducted December 7, 2007. This workshop was presented by the University of Connecticut in 2007.
External Link:http://www.oehc.uchc.edu/control_banding.asp
U.S. National Control Banding Workshop
Workshop was conducted March 9-10, 2005. This site contains several presentations that were delivered at the Control banding workshop held in Ohio in 2005.
External Link: http://www.ilma.org/about/ncb_workshop0305.cfm
The Practical Application in Developing Countries
This report was developed by ILO-WHO/IPCS from a planning meeting on control banding, June 13-16, 2004 in the Netherlands.
External Link: http://www.ilo.org/public/english/protection/safework/ctrl_banding/utrecht_report.pdf
Global Implementation Strategy
A report developed by ILO-WHO/IPCS International Technical Group Meeting in May 28, 2004, on the global implementation strategy of the Occupational Risk Management Toolbox.
External Link: http://www.ilo.org/public/english/protection/safework/ctrl_banding/strategy.pdf
3rd International Control Banding Workshop
Workshop was conducted September 21, 2005. This site provides by the IOHA contains abstracts and presentations from the international workshop on Global Trends in Control Banding Collaborations.
External Link: http://www.ioha.net/ioha2005/Proceedings/SSI.htm
2nd International Control Banding Workshop
This workshop was conducted March 1-2 2004. This site provides presentations from the Control Banding Workshop, entitled Validation and Effectiveness of Control Banding.
External Link: http://www.acgih.org/events/ControlBand
1st International Control Banding Workshop
This two-day workshop was held in London in November 4-5 2002. This site contains outlines and presentations from that workshop.
External Link: http://www.bohs.org/eventDetails.aspx?event=42
Documents and Publications
Application of a Pilot Control Banding Tool for Risk Level Assessment and Control of Nanoparticle Exposures
Samuel Y. Paik, David M. Zalk, and Paul Swuste—Annals of Occupational Hygiene 2008 52(6): 419-428. Originally published on July 16, 2008.
External Link: http://annhyg.oxfordjournals.org/cgi/content/abstract/52/6/419
‘Stoffenmanager’, a Web-Based Control Banding Tool Using an Exposure Process Model
Hans Marquart et al.—Annals of Occupational Hygiene. 2008 52(6):429-441. Originally published on June 27, 2008
External Link: http://annhyg.oxfordjournals.org/cgi/content/abstract/men032
History and Evolution of Control Banding: A Review
David M. Zalk and Deborah Imel Nelson—Journal of Occupational and Environmental Hygiene, 5:5, 330-346. First published 01 May 2008.
External Link: http://www.ilo.org/public/english/protection/safework/ctrl_banding/zalk-nelson_cb_review.pdf
Control Banding: Issues and Opportunities
A Report of the ACGIH Exposure Control Banding Task Force, Publication #08-001, Copyright 2008.
External Link: http://www.acgih.org/store/ProductDetail.cfm?id=2004
Evaluation of the control banding method--comparison with measurement-based comprehensive risk assessment.
Hashimoto H, Goto T, Nakachi N, Suzuki H, Takebayashi T, Kajki S, Mori K. Journal of Occupational Health, 2007 Nov; 49(6):482-92.
External Link: http://www.ncbi.nlm.nih.gov/pubmed/18075208
Guidance for Conducting Control Banding Analyses
Written by the AIHA Control Banding Working Group, this guide describes key concepts, significant developments, and research needs associated with the practical performance of a control-based approach to identifying and controlling hazardous agents. A comprehensive reference list, study resources, and other helpful aids for conducting control banding analyses are included.
External link: http://iweb.aiha.org/iweb/Purchase/ProductDetail.aspx?Product_code=AEAG07-726
Additional Control Banding Links
Several organizations maintain electronic topic pages on Control Banding. Please refer to the following websites for additional information.
AIHA Control banding working group
External Link: http://www.aiha.org/Content/InsideAIHA/Volunteer+Groups/controlbanding.htm
International Labour Organization
External link: http://www.ilo.org/public/english/protection/safework/ctrl_banding/index.htm
International Occupational Hygiene Association
External Link: http://www.ioha.net/cb/control-banding-links.htm
COSHH Essentials (United Kingdom)
External Link: http://www.coshh-essentials.org.uk/
COSHH Essentials Spanish (en Espanol) (United Kingdom)
External Link: http://bravo.ilo.org/public/spanish/protection/safework/coshh_essentials_silica/index.htm
Stoffenmanager 3.5 (the Netherlands)
External Link: https://www.stoffenmanager.nl/Default.aspx
GTZ Chenical Management Guide for Small and Medium Sized Enterprises (Germany)--Practical guide for enterprises on improving chemical management, gaining cost savings, reducing hazards and improving safety.
External Link: http://www.gtz.de/en/themen/laendliche-entwicklung/11324.htm
Related NIOSH Topic Pages
NIOSH Contacts
For additional information, contact T.J. Lentz (TLentz@cdc.gov) or Rick Niemeier (RNiemeier@cdc.gov).
Page last updated:
August 26, 2009
Page last reviewed:
September 22, 2008
Content Source: National Institute for Occupational Safety and Health (NIOSH)
|
