![[logo] US EPA](https://webarchive.library.unt.edu/eot2008/20090510114103im_/http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
Superfund Chemical Data Matrix (SCDM)
The Superfund Chemical Data Matrix (SCDM) is a source for factor values and benchmark values applied when evaluating potential National Priorities List (NPL) sites using the Hazard Ranking System (HRS). Factor values are part of the HRS mathematical equation for determining the relative threat posed by a hazardous waste site and reflect hazardous substance characteristics, such as toxicity and persistence in the environment, substance mobility, and potential for bioaccumulation. Benchmarks are environment- or health-based substance concentration limits developed by or used in other EPA regulatory programs. SCDM contains HRS factor values and benchmark values for hazardous substances that are frequently found at sites evaluated using the HRS, as well as the physical, chemical, and radiological data used to calculate those values. The accompanying SCDM Methodology report describes how data are selected or calculated for inclusion in SCDM and how SCDM data, HRS factor values, and benchmarks are presented in formatted printouts.
On January 28, 2004, EPA released an updated SCDM with many revisions to the HRS factor values and benchmarks. These revisions were necessary both because of updates in the SCDM procedures used to assign HRS factor values and benchmarks and because of revisions to pertinent standards and criteria for individual hazardous substances and their associated characteristics.
Disclaimer
The Superfund Chemical Data Matrix (SCDM) is a database containing factor values and benchmark values used for applying the Hazard Ranking System (HRS) [40 CFR Part 300 Appendix A, 55 FR 51583] to evaluate potential National Priorities List (NPL) sites. The physical, chemical, toxicological, and radiological parameters used to calculate the factor values and benchmarks contained in SCDM are obtained from references listed in Chapters 2 and 3 of the SCDM Methodology. The references and the data extracted from them were selected to meet specific HRS requirements and conditions which may not be applicable or representative for other uses. In addition, the parameter values are updated only on an "as needed" basis. As a screening tool, the HRS and SCDM are used for quickly assessing sites at the screening stage and data used to perform this task may not be applicable for other site specific purposes.
The parameter values in SCDM should be used for HRS and NPL purposes only.
You will need Adobe Acrobat Reader to view some of the files on this page.
See EPA's PDF page to learn more about PDF, and for a link to the free Acrobat Reader.
Superfund Chemical Data Matrix Report
- SCDM Methodology Report PDF
- Part 1 - Table of Contents and Introduction (PDF) (5 pp, 283K)
- Part 2 - Data Selection Methodology (PDF) (22 pp, 1.9MB)
- Part 3 - Calculations in SCDM (PDF) (28 pp, 1.19MB)
- Appendix A - Chemical Data, Factor Values, and Benchmarks for Chemical Substances PDF
- Part 1 - Acenaphthene to Cesium (PDF) (70 pp, 1.62MB)
- Part 2 - Cesium 137(+D) (radionuclide) to Dichloropropane, 1,2 (PDF) (70 pp, 1.7MB)
- Part 3 - Dichloropropene, 1,3- to Hexachlorodibenzofuran 1,2,3,7,8,9 (PDF) (70 pp, 1.7MB)
- Part 4 - Hexachlorodibenzofuran 2,3,4,6,7,8- to Plutonium 236 (radionuclide) (PDF) (70 pp, 1.6MB)
- Part 5 - Plutonium 238 (radionuclide) to Thorium 231 (radionuclide) (PDF) (70 pp, 1.6MB)
- Part 6 - Thorium 232 (radionuclide) to Zinc 65 (radionuclide) and Footnotes (PDF) (61 pp, 1.4MB)
- Appendix BI - Hazardous Substance Factor Values (PDF) (15 pp, 156K)
- Appendix BII - Hazardous Substance Benchmarks (PDF) (32 pp, 414K)
- Appendix C - Hazardous Substance Synonyms Report (PDF) (3 pp, 73K)
- SCDM Interim Revised Values for Ammonia; Asbestos; Atrazine; Dibutyltin; Furfural; Nitrobenzene; Nitrosodimethylamine, N-; Perchlorate; Tributyltin; Tributyltin Chloride; Tributyltin Oxide; and Trichloroethylene (TCE)
- Ammonia Appendix A (PDF) (7 pp, 191K)
- Ammonia Appendices BI & BII (PDF) (6 pp, 135K)
- Asbestos Appendix A (PDF) (7 pp, 149K)
- Asbestos Appendices BI & BII (PDF) (6 pp, 135K)
- Atrazine Appendix A (PDF) (5 pp, 143K)
- Atrazine Appendices BI & BII (PDF) (7 pp, 126K)
- Dibutyltin Appendix A (PDF) (7 pp, 190K)
- Dibutyltin Appendices BI & BII (PDF) (6 pp, 127K)
- Furfural Appendix A (PDF) (5 pp, 201K)
- Furfural Appendices BI & BII (PDF) (1 pg, 65K)
- Nitrobenzene Appendix A (PDF) (5 pp, 205K)
- Nitrobenzene Appendices BI & BII (PDF) (1 pg, 51K)
- Nitrosodimethylamine, N- Appendix A (PDF) (5 pp, 207K)
- Nitrosodimethylamine, N- Appendices BI & BII (PDF) (6 pp, 138K)
- Perchlorate Appendix A (PDF) (5 pp, 67K)
- Perchlorate Appendices BI & BII (PDF) (7 pp, 59K)
- Tributyltin Appendix A (PDF) (7 pp, 181K)
- Tributyltin Appendices BI & BII (PDF) (6 pp, 128K)
- Tributyltin Chloride Appendix A (PDF) (7 pp, 141K)
- Tributyltin Chloride Appendices BI & BII (PDF) (6 pp, 161K)
- Tributyltin Oxide Appendix A (PDF) (7 pp, 135K)
- Tributyltin Oxide Appendices BI & BII (PDF) (6 pp, 129K)
- Trichloroethylene (TCE) Appendix A (PDF) (7 pp, 183K)
- Trichloroethylene (TCE) Appendices BI & BII (PDF) (1 pg, 37K)
Please note that the January 2004 SCDM was developed by compiling a list of CERCLA hazardous substances used in the scoring of NPL sites since 1990. The previous SCDM versions were developed using all substances ever scored at a site using the original HRS. The January 2004 SCDM does not include any substance that has not been used in the scoring of a site since 1990, even if previously listed in SCDM.
There are 17 new entries (PDF) (1 pg, 41K) (with new CAS Numbers) in the January 2004 version of SCDM that were not in the 1996 version. There are 235 fewer entries (PDF) (5 pp, 58K). Some of these changes resulted from new naming conventions and more specific identification of isomers and congeners. Also, some substances were removed because they were pollutants and contaminants and not CERCLA hazardous substances.
NOTE: Please do not assume that any substance not listed in the January 2004 SCDM cannot be used for HRS scoring. The number of entries was reduced to save resources in developing, updating, and tracking changes in chemical properties. If values are needed for a substance that was not listed in the January 2004 SCDM and are thought to be critical to the listing decision, please request the value by calling the SCDM Helpline. As a preliminary value (for screening purposes only), the former 1996 value associated with the substance can be used, and EPA will verify the new value if necessary. For all technical questions concerning SCDM, please contact the SCDM Helpline.
For SCDM information, contact:
Ms. Yolanda Singer (singer.yolanda@epa.gov)
US Environmental Protection Agency
1200 Pennsylvania Avenue, N.W.
Washington, DC 20460
Phone: (703) 603-8835
Email: singer.yolanda@epa.gov