![]() ![]() | ||||||||||
|
|
![]() |
![]() |
![]() |
![]() |
![]() |
||||
|
![]() |
![]() |
![]() |
Fatal and Nonfatal Occupational Injuries Involving Wood Chippers --- United States, 1992--2002Tree damage from storms and routine tree-trimming operations prompt the need for disposing of branches and brush. Mobile wood chippers (Figure) shred branches and tree trimmings into mulch. Branches are fed into a chute, in which rotating blades macerate the wood. Mobile chippers pose potential dangers to operators, who can become caught in the feed mechanism and pulled into the rotating chipper knives or struck by the hood of the machine while it is being opened or closed with the knives still rotating. This report summarizes data describing fatal and nonfatal injuries related to occupational wood chipper use, which indicate that those working with mobile wood chippers are at risk for serious injury and death, but that these injuries can be prevented through proper training, machine maintenance, and the use of personal protective equipment. To describe fatal injuries associated with wood chippers, CDC analyzed 11 years of data from the Bureau of Labor Statistics (BLS) Census of Fatal Occupational Injuries (CFOI) for 1992--2002 (the most current data available to CDC)*. Cases were selected if the primary or secondary source of injury was a chipper (source code 3231). After a review of all narrative descriptions, nonmobile chippers (e.g., those used as stationary equipment in saw mills) were removed from the analysis of fatal injuries. Costs were calculated by using the cost-of-illness approach (1). To assess nonfatal injuries, CDC reviewed 10 years of data reported by the BLS Survey of Occupational Injuries and Illnesses for 1992--2001 by using the same source code. This data set captures nonfatal cases involving days away from work. For nonfatal injuries, narrative case descriptions were not available for review; therefore, removing cases involving nonmobile chippers was not possible. Fatal Cases Involving Mobile Wood ChippersDuring 1992--2002, a total of 31 occupational injury deaths were attributable to mobile chippers. All decedents were male; mean age at death was 35 years (range: <20--60 years). Of these deaths, 12 (39%) occurred among persons aged 25--34 years. Seventeen (55%) occurred in the agriculture, forestry, and fishing industry, and seven (23%) occurred in the manufacturing industry. Twenty-one (68%) were the result of being caught or compressed by the chipper, and nine (29%) were the result of being struck by the machine or a machine part. Thirteen (42%) of the fatally injured workers were groundskeepers, and five (16%) were machine operators, assemblers, and inspectors. The remaining were classified as managers, forest conservation specialists, farm workers, carpenters, cutters/welders, miscellaneous machine operators, and construction and nonconstruction laborers. Approximately one third of the events occurred in July or August. Of 26 cases among persons for whom ethnicity was known, seven (27%) were among Hispanics. Societal costs of all chipper-related fatalities (primary source code 3231) for 1992--2001 are estimated at $28.5 million in 2003 dollars (CDC, unpublished data, 2004§). Nonfatal Cases Involving Mobile and Stationary Wood ChippersDuring 1992--2001, an estimated 2,042 injuries resulted from working with chippers, an average of 204 per year. Of these injuries, 47% occurred among workers aged 25--34 years. In 1,224 (60%) of the workers, the injuries were to an upper extremity. During 1992--1996, an estimated 155 amputations caused by injuries from chippers occurred. In approximately one quarter of the cases, the injured person missed >30 days from work. Sixteen percent of persons injured had worked <3 months at the job at the time of injury; another 18% had worked 3--11 months. Reported by: TW Struttmann, Div of Safety Research, National Institute for Occupational Safety and Health, CDC. Editorial Note:The primary risks associated with use of wood chippers include being caught in the rotating knives of the machine and being struck by flying objects (e.g., the chipper hood, which can fly off if it contacts the rotating blades). Use of mobile wood chippers might increase after storm damage, thus exposing more persons to these hazards. In addition, chippers are available from equipment rental companies and can be rented and used by homeowners and others. Employers, workers, and others who use wood chippers can reduce their risk for injury. Personal protective equipment recommended during chipper operations includes hard hat, eye protection, hearing protection, safety boots, and close-fitting outer clothing (2). Worker training should include instruction in 1) the correct operation of safety devices and controls consistent with the recommendations of the manufacturer, 2) the need to keep hands and feet away from the feed chute, 3) proper procedures for feeding brush and limbs into the feed chute, and 4) standing to the side in reach of the emergency shut-off when feeding branches. A long branch should be used as a push stick to feed shorter material into the chipper. Small material such as twigs and leaves should be put directly into the transport container (e.g., dump truck) instead of into the chipper. The area around the chipper should be kept clear to reduce tripping hazards. Equipment rental companies should provide training or ensure that renters receive safe-operating instructions from the manufacturer. To protect users from being struck by flying hoods, chippers should be thoroughly inspected each day before start-up. The hood should completely cover the chipper knives, and workers should ensure that knives come to a complete stop before opening the hood. Persons aged <18 years should be prohibited from operating chippers (3). The number of chipper-related deaths among Hispanic workers during 1992--2002 was consistent with the increase in total occupational deaths among Hispanic workers during that period. Deaths among Hispanic workers accounted for 8.6% of all occupational fatalities in 1992 and 15.2% in 2002 (4). The growth in the Hispanic labor force is projected to be 17% during 2004--2010, whereas the total labor force is estimated to increase only 7% (5). After Hurricane Charley, the report, Injury Associated with Working Near or Operating Wood Chippers (6), which summarizes hazards and prevention recommendations, was made available to all extension agents in Florida through the University of Florida Extension Service (C. Lehtola, Department of Agriculture and Biological Engineering, University of Florida, personal communication, 2004). The report is available at http://www.cdc.gov/niosh/hid8.html; a Spanish translation is available at http://www.cdc.gov/spanish/niosh/docs/99-145sp.html. The findings in this report are subject to at least five limitations. First, because chippers are used in multiple industries and occupations, the number of workers exposed could not be determined; therefore, rates and relative risk could not be calculated. Second, CFOI cases could have been coded to sources other than 3231. Third, nonfatal injury estimates are based on a sample of employer-reported injuries and might underestimate the number of injuries caused by chippers. Farms employing fewer than 11 persons and self-employed, government, and household workers were excluded from the survey. Fourth, removing stationary chippers from the data on nonfatal cases was not possible. Finally, the data presented in this report do not include injuries and deaths that might have occurred in nonwork settings. Tree and branch removal is a necessary post-storm task. Deaths and injuries involving mobile chippers can be prevented through worker training, machine maintenance, and the use of personal protective equipment. References
* Using death certificates, worker's compensation reports, state and federal agency records, and other supporting documents, CFOI collects data on all fatal occupational injuries in the 50 states and the District of Columbia to determine worker demographics and the circumstances and causes of fatalities. CFOI data files provided to CDC by BLS do not include New York City. The Survey of Occupational Injuries and Illnesses is a federal/state program in which reports from employers from their OSHA-reportable injuries are collected annually from nearly 176,000 private-industry establishments and processed by state agencies cooperating with BLS, and national estimates are made. Government employees, private household workers, the self-employed, and farms with fewer that 11 employees are excluded. Information about nonfatal cases involving days away from work during 1992--2001 is available at http://www.bls.gov/iif/home.htm § Data are available by request at e-mail, egb6@cdc.gov.
Figure ![]() Return to top.
Disclaimer All MMWR HTML versions of articles are electronic conversions from ASCII text into HTML. This conversion may have resulted in character translation or format errors in the HTML version. Users should not rely on this HTML document, but are referred to the electronic PDF version and/or the original MMWR paper copy for the official text, figures, and tables. An original paper copy of this issue can be obtained from the Superintendent of Documents, U.S. Government Printing Office (GPO), Washington, DC 20402-9371; telephone: (202) 512-1800. Contact GPO for current prices. **Questions or messages regarding errors in formatting should be addressed to mmwrq@cdc.gov.Page converted: 12/9/2004 |
![]() |
|||||||
This page last reviewed 12/9/2004
|