ARCHEOLOGY
AND HISTORIC PRESERVATION:
Secretary of the Interior's Standards
and Guidelines
[As Amended and Annotated]
Agency: National Park Service, Department of the Interior. Action: Notice.
Summary: This notice sets forth the Secretary of the Interior's Standards and Guidelines for Archeology and Historic Preservation. These standards and guidelines are not regulatory and do not set or interpret agency policy. They are intended to provide technical advice about archeological and historic preservation activities and methods.
Dates:
These Standards and Guidelines are effective on September 29, 1983.*
*[The National Park Service has not republished "The Secretary of the Interior's Standards and Guidelines for Archeology and Historic Preservation" since 1983 (48 FR 44716). NPS has updated portions of the Standards and Guidelines. Where NPS has officially revised portions and published the revisions in the Federal Register, such as the Historic Preservation Project standards and the treatment definitions, we strike through the 1983 language and provide a link to the new material. Where the 1983 language is not current but NPS has not officially replaced it, such as the technical information, we strike through the out-of-date materials. We then provide current technical information and links to NPS and partner websites where this information is available.
Language within brackets has not been published for effect in the Federal Register as a part of the Secretary of the Interior's Standards and Guidelines for Archeology and Historic Preservation.]
For Further
Information Contact: Lawrence E. Aten, Chief, Interagency Resources Division,
National Park Service, United States Department of the Interior, Washington,
DC 20240 (202- 343-9500). A Directory of Technical Information listing other
sources of supporting information is available from the National Park Service.
NPS Cultural Resources Email Contacts
Supplementary Information: The Standards and Guidelines are prepared under the authority of sections 101(f) (g), and (h), and section 110 of the National Historic Preservation Act of 1966, as amended. State Historic Preservation Officers: Federal Preservation Officers including those of the Department of Agriculture, Department of Defense, Smithsonian Institution and General Services Administration; the Advisory Council on Historic Preservation; the National Trust for Historic Preservation; and other interested parties were consulted during the development of the Standards and Guidelines; additional consultation with these agencies will occur as the Standards and Guidelines are tested during their first year of use.
Purpose
The proposed Standards and the philosophy on which they are based result
from nearly twenty years of intensive preservation activities at the Federal,
State, and local levels.
The purposes of the Standards are:
Uses of
the Standards
The following groups or individuals are encouraged to use these Standards:
Organization
This material is organized in three sections: Standards; Guidelines; and recommended
technical sources, cited at the end of each set of guidelines. Users of this
document are expected to consult the recommended technical sources to obtain
guidance in specific cases.
Review
of the Standards and Guidelines
The Secretary of the Interior's Standards for Rehabilitation have recently
undergone extensive review and their guidelines made current after 5 years of
field use. Users and other interested parties are encouraged to submit written
comments on the utility of these Standards and Guidelines except for the Rehabilitation
Standards mentioned above. This edition will be thoroughly reviewed by the National
Park Service (including consultation with Federal and State agencies), after
the end of its first full year of use and any necessary modifications will be
made. Subsequent reviews are anticipated as needed. [Comments should be sent
to Chief, Interagency Resources Division, National Park Service, United States
Department of the Interior, Washington, DC 20240.]
Preservation planning is a process that organizes preservation activities (identification, evaluation, registration and treatment of historic properties) in a logical sequence. The Standards for Planning discuss the relationship among these activities while the remaining activity standards consider how each activity should be carried out. The Professional Qualifications Standards discuss the education and experience required to carry out various activities.
The Standards for Planning outline a process that determines when an area should be examined for historic properties, whether an identified property is significant, and how a significant property should be treated.
Preservation planning is based on the following principles:
Standard I. Preservation Planning Establishes Historic Contexts
Decisions about the identification, evaluation, registration and treatment of historic properties are most reliably made when the relationship of individual properties to other similar properties is understood. Information about historic properties representing aspects of history, architecture, archeology, engineering and culture must be collected and organized to define these relationships. This organizational framework is called a "historic context." The historic context organizes information based on a cultural theme and its geographical and chronological limits. Contexts describe the significant broad patterns of development in an area that may be represented by historic properties. The development of historic contexts is the foundation for decisions about identification, evaluation, registration and treatment of historic properties.
Standard II. Preservation Planning Uses Historic Contexts To Develop Goals and Priorities for the Identification, Evaluation, Registration and Treatment of Historic Properties
A series of preservation goals is systematically developed for each historic context to ensure that the range of properties representing the important aspects of each historic context is identified, evaluated and treated. Then priorities are set for all goals identified for each historic context. The goals with assigned priorities established for each historic context are integrated to produce a comprehensive and consistent set of goals and priorities for all historic contexts in the geographical area of a planning effort.
The goals for each historic context may change as new information becomes available. The overall set of goals and priorities are then altered in response to the changes in the goals and priorities for the individual historic contexts.
Activities undertaken to meet the goals must be designed to deliver a usable product within a reasonable period of time. The scope of the activity must be defined so the work can be completed with available budgeted program resources.
Standard III. The Results of Preservation Planning Are Made Available for Integration Into Broader Planning Processes
Preservation
of historic properties is one element of larger planning processes. Planning
results, including goals and priorities, information about historic properties,
and any planning documents, must be transmitted in a usable form to those responsible
for other planning activities. Federally mandated historic preservation planning
is most successfully integrated into project management planning at an early
stage. Elsewhere, this integration is achieved by making the results of preservation
planning available to other governmental planning bodies and to private interests
whose activities affect historic properties.
Introduction
These Guidelines link the Standards for Preservation Planning with more specific guidance and technical information. They describe one approach to meeting the Standards for Preservation Planning. Agencies, organizations or individuals proposing to approach planning differently may wish to review their approaches with the National Park Service.
The Guidelines
are organized as follows:
Managing the Planning Process
Developing Historic Contexts
Developing Goals for a Historic Context
Integrating Individual Historic Contexts-Creating the Preservation
Plan
Coordinating with Management Frameworks
Recommended Sources of Technical Information
The preservation planning process must include an explicit approach to implementation, a provision for review and revision of all elements, and a mechanism for resolving conflicts within the overall set of preservation goals and between this set of goals and other land use planning goals. It is recommended that the process and its products be described in public documents.
Implementing
the Process
The planning process is a continuous cycle. To establish and maintain such a
process, however, the process must be divided into manageable segments that
can be performed, within a defined period, such as a fiscal year or budget cycle.
One means of achieving this is to define a period of time during which all the
preliminary steps in the planning process will be completed. These preliminary
steps would include setting a schedule for subsequent activities.
Review
and Revision
Planning is a dynamic process. It is expected that the content of the historic
contexts described in Standard I and the goals and priorities described in Standard
II will be altered based on new information obtained as planning proceeds. The
incorporation of this information is essential to improve the content of the
plan and to keep it up-to-date and useful. New information must be reviewed
regularly and systematically, and the plan revised accordingly.
Public
Participation
The success of the preservation planning process depends on how well it solicits
and integrates the views of various groups. The planning process is directed
first toward resolving conflicts in goals for historic preservation, and second
toward resolving conflicts between historic preservation goals and other land
use planning goals. Public participation is integral to this approach and includes
at least the following actions:
Documents
Resulting from the Planning Process
In most cases, the planning process produces documents that explain how
the process works and that discuss the historic contexts and related goals and
priorities. While the process can operate in the absence of these documents,
planning documents are important because they are the most effective means of
communicating the process and its recommendations to others. Planning documents
also record decisions about historic properties.
As various parts of the planning process are reviewed and revised to reflect current information, related documents must also be updated. Planning documents should be created in a form that can be easily revised. It is also recommended that the format language and organization of any documents or other materials (visual aids, etc.) containing preservation planning information meet the needs of prospective users.
General
Approach
Available information about historic properties must be divided into manageable
units before it can be useful for planning purposes. Major decisions about identifying,
evaluating, registering and treating historic properties are most reliably made
in the context of other related properties. A historic context is an organizational
format that groups information about related historic properties, based on a
theme, geographic limits and chronological period. A single historic context
describes one or more aspects of the historic development of an area, considering
history, architecture, archeology, engineering and culture and identifies the
significant patterns that individual historic properties represent, for example,
Coal Mining in Northeastern Pennsylvania between 1860 and 1930. A set of historic
contexts is a comprehensive summary of all aspects of the history of the area.
The historic context is the cornerstone of the planning process. The goal of preservation planning is to identify, evaluate, register and treat the full range of properties representing each historic context, rather than only one or two types of properties. Identification activities are organized to ensure that research and survey activities include properties representing all aspects of the historic context. Evaluation uses the historic context as the framework within which to apply the criteria for evaluation to specific properties or property types. Decisions about treatment of properties are made with the goal of treating the range of properties in the context. The use of historic contexts in organizing major preservation activities ensures that those activities result in the preservation of the wide variety of properties that represent our history, rather than only a small, biased sample of properties.
Historic contexts, as theoretical constructs, are linked to actual historic properties through the concept of property type. Property types permit the development of plans for identification, evaluation and treatment even in the absence of complete knowledge of individual properties. Like the historic context, property types are artificial constructs which may be revised as necessary. Historic contexts can be developed at a variety of scales appropriate for local, State and regional planning. Give the probability of historic contexts overlapping in an area, it is important to coordinate the development and use of contexts at all levels. Generally, the State Historic Preservation Office possesses the most complete body of information about historic properties and, in practice, is in the best position perform this function.
The development of historic contexts generally results in documents that describe the prehistoric processes or patterns that define the context. Each of the contexts selected should be developed to the point of identifying important property types to be useful in later preservation decision-making. The amount of detail included in these summaries will vary depending on the level (local, State, regional, or national) at which the contexts are developed and on their intended uses. For most planning purposes, a synopsis of the written description of the historic context is sufficient.
Creating
a Historic Context
Generally, historic contexts should not be constructed so broadly as to include
all property types under a single historic context or so narrowly as to contain
only one property type per historic context. The following procedures should
be followed in creating a historic context.
1. Identify the concept, time period and geographical limits for the historic context
Existing
information, concepts, theories, models and descriptions should be used as the
basis for defining historic contexts. Biases in primary and secondary sources
should be identified and accounted for when existing information is used in
defining historic contexts.
The identification and description of historic contexts should incorporate contributions
from all disciplines involved in historic preservation. The chronological period
and geographical area of each historic context should be defined after the conceptual
basis is established. However, there may be exceptions, especially in defining
prehistoric contexts where drainage systems or physiographic regions often are
outlined first. The geographical boundaries for historic contexts should not
be based upon contemporary political, project or other contemporary boundaries
if those boundaries do not coincide with historical boundaries. For example,
boundaries for prehistoric contexts will have little relationship to contemporary
city, county or State boundaries.
2. Assemble
the existing information about the historic context
In addition, organizations and groups that may have important roles in defining historic contexts and values should be identified. In most cases a range of knowledgeable professionals drawn from the preservation, planning and academic communities will be available to assist in defining contexts and in identifying sources of information. In other cases, however, development of historic contexts may occur in areas whose history or prehistory has not been extensively studied. In these situations, broad general historic contexts should be initially identified using available literature and expertise, with the expectation that the contexts will be revised and subdivided in the future as primary source research and field survey are conducted. It is also important to identify such sources of information as existing planning data, which is needed to establish goals for identification, evaluation and treatment, and to identify factors that will affect attainment of those goals.
The same approach for obtaining information is not necessarily desirable for all historic contexts. Information should not be gathered without first considering its relative importance to the historic context, the cost and time involved, and the expertise required to obtain it. In many cases, for example, published sources may be used in writing initial definitions of historic contexts; archival research or field work may be needed for subsequent activities.
3. Synthesize information
The information collection and analysis results in a written narrative of the historic context. This narrative provides a detailed synthesis of the data that have been collected and analyzed. The narrative covers the history of the area from the chosen perspective and identifies important patterns, events, persons or cultural values. In the process of identifying the important patterns, one should consider:
4. Define property types
A property type is a grouping of individual properties based on shared physical or associative characteristics. Property types link the ideas incorporated in the theoretical historic context with actual historic properties that illustrate those ideas. Property types defined for each historic context should be directly related to the conceptual basis of the historic context. Property types defined for the historic context "Coal Mining in Northeastern Pennsylvania, 1860-1930" might include coal extraction and processing complexes; railroad and canal transportation systems; commercial districts; mine workers' housing; churches, social clubs and other community facilities reflecting the ethnic origins of workers; and residences and other properties associated with mine owners and other industrialists.
Generally, property types should be defined after the historic context has been defined. Property types in common usage ("Queen Anne House," "mill buildings" or "stratified sites") should not be adopted without first verifying their relevance to the historic contexts being used.
5. Identify information needs
Filling gaps in information is an important element of the preservation plan designed for each historic context. Statements of the information needed should be as specific as possible, focusing on the information needed, the historic context and property types it applies to, and why the information is needed to perform identification, evaluation, or treatment activities.
Developing Goals for a Historic Context
Developing
Goals
A goal is a statement of preferred preservation activities, which is generally
stated in terms of property types.
The purpose of establishing preservation goals is to set forth a "best case"
version of how properties in the historic context should be identified, evaluated,
registered and treated.
Preservation goals should be oriented toward the greatest possible protection of properties in the historic context and should be based on the principle that properties should be preserved in place if possible, through affirmative treatments like rehabilitation, stabilization or restoration. Generally, goals will be specific to the historic context and will often be phrased in terms of property types. Some of these goals will be related to information needs previously identified for the historic context. Collectively, the goals for a historic context should be a coherent statement of program direction covering all aspects of the context.
For each goal, a statement should be prepared identifying:
Setting
priorities for goals
Once goals have been developed they need to be ranked in importance. Ranking
involves examining each goal in light of a number of factors.
Some property types in the historic context may be more directly threatened by deterioration, land development patterns, contemporary use patterns, or public perceptions of their value, and such property types should be given priority consideration.
The identification or treatment of some property types may be technically possible but the cost prohibitive; or techniques may not currently be perfected (for example, the identification of submerged sites or objects, or the evaluation of sites containing material for which dating techniques are still being developed).
If a number of properties representing one aspect of a historic context have been recorded or preserved, treatment of additional members of that property type may receive lower priority than treatment of a property type for which no examples have yet been recorded or preserved. This approach ensures that the focus of recording or preserving all elements of the historic context is retained, rather than limiting activities to preserving properties representing only some aspects of the context.
The result of considering the goals in light of these concerns will be a list of refined goals ranked in order of priority.
Integrating Individual Contexts-Creating the Preservation Plan
When historic contexts overlap geographically, competing goals and priorities must be integrated for effective preservation planning. The ranking of goals for each historic context must be reconciled to ensure that recommendations for one context do not contradict those for another. This important step results in an overall set of priorities for several historic contexts and a list of the activities to be performed to achieve the ranked goals. When applied to a specific geographical area, this is the preservation plan for that area.
It is expected that in many instances historic contexts will overlap geographically. Overlapping contexts are likely to occur in two combinations-those that were defined at the same scale (i.e., textile development in Smithtown 1850-1910 and Civil War in Smithtown 1855-1870) and those defined at different scales (i.e., Civil War in Smithtown and Civil War in the Shenandoah Valley). The contexts may share the same property types, although the shared property types will probably have different levels of importance, or they may group the same properties into different property types, reflecting either a different scale of analysis or a different historical perspective. As previously noted, many of the goals that are formulated for a historic context will focus on the property types defined for that context. Thus it is critical that the integration of goals include the explicit consideration of the potential for shared property type membership by individual properties. For example, when the same property types are used by two contexts, reconciling the goals will require weighing the level of importance assigned to each property type. The degree to which integration of historic contexts must involve reconciling property types may be limited by the coordinated development of historic contexts used at various levels.
Integration with Management Frameworks
Preservation
goals and priorities are adapted to land units through integration with other
planning concerns. This integration must involve the resolution of conflicts
that arise when competing resources occupy the same land base. Successful resolution
of these conflicts can often be achieved through judicious combination of inventory,
evaluation and treatment activities. Since historic properties are irreplaceable,
these activities should be heavily weighted to discourage the destruction of
significant properties and to be compatible with the primary land use.
A Planning Companion:
A Guide for State Historic Preservation Planning.
Susan L. Henry Renaud, 1983 (draft).
Describes an approach
to preservation planning that uses fully developed historic contexts as special
technical studies necessary to effective planning and decision-making.
Guidelines for Local Surveys: A Basis for Preservation Planning. (formerly National Register Bulletin 24). Anne Derry, H. Ward Jandl, Carol D. Shull, and Jan Thorman; revised by Patricia L. Parker, 1985.
Local Historic Preservation
Plans: A Selected Annotated Bibliography. Neil Gagliardi and Stephen Morris,
1993.
Provides an overview
of the range of local historic preservation plans from across the country, including
information on how a number of communities have addressed various issues in
their preservation plans.
The National Historic Landmarks Program Theme Study and Preservation Planning. Robert S. Grumet. Technical Brief 10, Archeology & Ethnography Program, National Park Service, 1990, revised 1992.
National
Park Service, 1994, Thematic Framework.
Use of the National Park
Service Thematic Framework need not be limited to the federal level, as the
conceptualization it provides can equally inform preservation and interpretation
at local, state, and regional levels.
Preparing a Historic
Preservation Plan. Bradford J. White and Richard J. Roddewig. Planning Advisory
Service Report No. 450, 1994.
Describes components
that are important in a good preservation plan and explains how several communities
have carried out preservation planning activities. Available from the American
Planning Association, 122 South Michigan Avenue, Suite 1600, Chicago, Illinois
60603-6107; (312) 786-6344.
Protecting Archeological
Sites on Private Lands. Susan L. Henry, with Geoffrey M. Gyrisco, Thomas
H. Veech, Stephen A. Morris, Patricia L. Parker, and Jonathan P. Rak.
Provides useful information
on strategies for protecting archaeological sites in local communities.
Reaching Out, Reaching
In: A Guide to Creating Effective Public Participation in State Historic Preservation
Planning. Barry R. Lawson, Ellen P. Ryan, and Rebecca Bartlett Hutchison,
1993.
Describes an approach
for designing public participation programs for State Historic Preservation
Office preservation planning, with a mini-case study from the Maryland Historical
Trust. May also be applicable in local community preservation planning settings.
Taking Command of Change:
A Practical Guide for Applying the Strategic Development Process in State Historic
Preservation Offices. Douglas C. Eadie, 1995.
Describes a strategic
planning approach designed to provide practical guidance to SHPOs in managing
growth and change.
Resource
Protection Planning Process. State and Plans Grants Division, 1980. Washington,
DC. Available from Survey and Planning Branch, Interagency Resources Division,
National Park Service, Department of the Interior, Washington, DC 20240.
Outlines
a step-by-step approach to implementing the resource protection planning process.
Resources
Protection Planning Process Case Studies. Available from Survey and
Planning Branch, Interagency Resources Division, National Park Service, Department
of the Interior, Washington, DC 20240. Reports prepared by State Historic Preservation
Offices and others using the planning process.
Planning
Theory. Andreas Faludi, 1980. Oxford: Pergamon Press. Constructs a model
of planning using concepts borrowed from general systems theory.
National Register Multiple Property Submission List
State
Historic Preservation Offices (SHPO)
Each SHPO Office has prepared a list of historic context titles, many, if not
all, of which may have been developed and might be available. In addition, some
SHPO Offices have developed guidelines for preparing historic contexts for their
states.
Identification activities are undertaken to gather information about historic properties in an area. The scope of these activities will depend on: existing knowledge about properties; goals for survey activities developed in the planning process; and current management needs.
Standard I. Identification of Historic Properties Is Undertaken to the Degree Required To Make Decisions
Archival research and survey activities should be designed to gather the information necessary to achieve defined preservation goals. The objectives, chosen methods and techniques, and expected results of the identification activities are specified in a research design. These activities may include archival research and other techniques to develop historic contexts, sampling an area to gain a broad understanding of the kinds of properties it contains, or examining every property in an area as a basis for property specific decisions. Where possible, use of quantitative methods is important because it can produce an estimate, whose reliability may be assessed, of the kinds of historic properties that may be present in the studied area. Identification activities should use a search procedure consistent with the management needs for information and the character of the area to be investigated. Careful selection of methods, techniques and level of detail is necessary so that the gathered information will provide a sound basis for making decisions.
Standard II. Results of Identification Activities Are Integrated Into the Preservation Planning Process
Results of identification activities are reviewed for their effects on previous planning data. Archival research or field survey may refine the understanding of one or more historic contexts and may alter the need for additional survey or study of particular property types. Incorporation of the results of these activities into the planning process is necessary to ensure that the planning process is always based on the best available information.
Standard III. Identification Activities Include Explicit Procedures for Record-Keeping and Information Distribution
Information gathered in
identification activities is useful in other preservation planning activities
only when it is systematically gathered and recorded, and made available to
those responsible for preservation planning. The results of identification activities
should be reported in a format that summarizes the design and methods of the
survey, provides a basis for others to review the results, and states where
information on identified properties is maintained. However, sensitive information,
like the location of fragile resources, must be safeguarded from general public
distribution.
Introduction
These Guidelines link the Standards for Identification with more specific guidance and technical information. The Guidelines outline one approach to meet the Standards for Identification. Agencies, organizations and individuals proposing to approach identification differently may wish to review their approaches with the National Park Service.
The Guidelines are organized
as follows:
Role of Identification in the Planning Process
Performing Identification
Integrating Identification Results
Reporting Identification Results
Recommended Sources of Technical Information
Role of Identification in the Planning Process
Identification is undertaken for the purpose of locating historic properties and is composed of a number of activities which include, but are not limited to archival research, informant interviews, field survey and analysis. Combinations of these activities may be selected and appropriate levels of effort assigned to produce a flexible series of options. Generally identification activities will have multiple objectives, reflecting complex management needs. Within a comprehensive planning process, identification is normally undertaken to acquire property-specific information needed to refine a particular historic context or to develop any new historic contexts. (See the Guidelines for Preservation Planning for discussion of information gathering to establish plans and develop historic contexts.) The results of identification activities are then integrated into the planning process so that subsequent activities are based on the most up-to-date information. Identification activities are also undertaken in the absence of a comprehensive planning process, most frequently as part of a specific land use or development project. Even lacking a formally developed preservation planning process, the benefits of efficient, goal-directed research may be obtained by the development of localized historic contexts, suitable in scale for the project ares, as part of the background research which customarily occurs before field survey efforts.
Research Design
Identification activities are essentially research activities for which a statement
of objectives or research design should be prepared before work is performed.
Within the framework of a comprehensive planning process, the research design
provides a vehicle for integrating the various activities performed during the
identification process and for linking those activities directly to the goals
and the historic context(s) for which those goals were defined. The research
design stipulates the logical integration of historic context(s) and field and
laboratory methodology. Although these tasks may be performed individually,
they will not contribute to the greatest extent possible in increasing information
on the historic context unless they relate to the defined goals and to each
other. Additionally, the research design provides a focus for the integration
of interdisciplinary information. It ensures that the linkages between specialized
activities are real, logical and address the defined research questions. Identification
activities should be guided by the research design and the results discussed
in those terms. (See Reporting Identification Results.)
The research design should include the following:
Archival research or survey methods should be carefully explained so that others using the gathered information can understand how the information was obtained and what its possible limitations or biases are. The methods should be compatible with the past and present environmental character of the geographical area under study and the kinds of properties most likely to be present in the area.
Archival Research
Archival or background research is generally undertaken prior to any field survey.
Where identification is undertaken as part of a comprehensive planning process,
background research may have taken place as part of the development of the historic
contexts (see the Guidelines for Preservation Planning). In the absence of previously
developed historic contexts, archival research should address specific issues
and topics. It should not duplicate previous work. Sources should include, but
not be limited to, historical maps, atlases, tax records, photographs, ethnographies,
folklife documentation, oral histories and other studies, as well as standard
historical reference works, as appropriate for the research problem. (See the
Guidelines for Historical Documentation for additional discussion.)
Field Survey
The variety of field survey techniques available, in combination with the varying
levels of effort that may be assigned, give great flexibility to implementing
field surveys. It is important that the selection of field survey techniques
and level of effort be responsive to the management needs and preservation goals
that direct the survey effort.
Survey techniques may be loosely grouped into two categories, according to their results. First are the techniques that result in the characterization of a region's historic properties. Such techniques might include "windshield" or walk-over surveys, with perhaps a limited use of sub-surface survey. For purposes of these Guidelines, this kind of survey is termed a "reconnaissance." The second category of survey techniques is those that permit the identification and description of specific historic properties in an area; this kind of survey effort is termed "intensive." The terms "reconnaissance" and "intensive" are sometimes defined to mean particular survey techniques, generally with regard to prehistoric sites. The use of the terms here is general and is not intended to redefine the terms as they are used elsewhere.
Reconnaissance survey might be most profitably employed when gathering data to refine a developed historic context-such as checking on the presence or absence of expected property types, to define specific property types or to estimate the distribution of historic properties in an area. The results of regional characterization activities provide a general understanding of the historic properties in a particular area and permit management decisions that consider the sensitivity of the area in terms of historic preservation concerns and the resulting implications for future land use planning. The data should allow the formulation of estimates of the necessity, type and cost of further identification work and the setting of priorities for the individual tasks involved. In most cases, areas surveyed in this way will require resurvey if more complete information is needed about specific properties.
A reconnaissance survey should document:
Intensive survey is most useful when it is necessary to know precisely what historic properties exist in a given area or when information sufficient for later evaluation and treatment decisions is needed on individual historic properties. Intensive survey describes the distribution of properties in an area; determines the number, location and condition of properties; determines the types of properties actually present within the area; permits classification of individual properties; and records the physical extent of specific properties. An intensive survey should document:
Sampling
Reconnaissance or intensive survey methods may be employed according to
a sampling procedure to examine less-than-the-total project or planning area.
Sampling can be effective when several locations are being considered for an undertaking or when it is desirable to estimate the cultural resources of an area. In many cases, especially where large land areas are involved, sampling can be done in stages. In this approach, the results of the initial large area survey are used to structure successively smaller, more detailed surveys. This "nesting" approach is an efficient technique since it enables characterization of both large and small areas with reduced effort. As with all investigative techniques, such procedures should be designed to permit an independent assessment of results.
Various types of sample surveys can be conducted, including, but not limited to: random, stratified and systematic. Selection of sample type should be guided by the problem the survey is expected to solve, the nature of the expected properties and the nature of the area to be surveyed.
Sample surveys may provide data to estimate frequencies of properties and types of properties within a specified area at various confidence levels. Selection of confidence levels should be based upon the nature of the problem the sample survey is designed to address.
Predictive modeling is an application of basic sampling techniques that projects or extrapolates the number, classes and frequencies of properties in unsurveyed areas based on those found in surveyed areas. Predictive modeling can be an effective tool during the early stages of planning an undertaking, for targeting field survey and for other management purposes. However, the accuracy of the model must be verified; predictions should be confirmed through field testing and the model redesigned and retested if necessary.
Special survey techniques
Special survey techniques may be needed in certain situations.
Remote sensing techniques may be the most effective way to gather background environmental data, plan more detailed field investigations, discover certain classes of properties, map sites, locate and confirm the presence of predicted sites, and define features within properties. Remote sensing techniques include aerial, subsurface and underwater techniques. Ordinarily the results of remote sensing should be verified through independent field inspection before making any evaluation or statement regarding frequencies or types of properties.
Integrating Identification Results
The results of identification efforts must be integrated into the planning process so that planning decisions are based on the best available information. The new information is first assessed against the objectives of the identification efforts to determine whether the gathered information meets the defined identification goals for the historic context(s); then the goals are adjusted accordingly. In addition, the historic context narrative, the definition of property types and the planning goals for evaluation and treatment are all adjusted as necessary to accommodate the new data.
Reporting Identification Results
Reporting of the results of identification activities should begin with the statement of objectives prepared before undertaking the survey. The report should respond to each of the major points documenting:
A summary of the survey results should be available for examination and distribution. Identified properties should then be evaluated for possible inclusion in appropriate inventories.
Protection of information
about archeological sites or other properties that may be threatened by dissemination
of that information is necessary. These may include fragile archeological properties
or properties such as religious sites, structures, or objects, whose cultural
value would be compromised by public knowledge of the property's location.
Archaeological Method and Theory: An Encyclopedia. Linda Ellis, editor. Garland Publishing, Inc., New York, 2000.
Archaeological Prospecting and Remote Sensing. I. Scollar, A. Tabbagh, A. Hesse, and I. Herzog. Cambridge University Press, Cambridge, 1990.
"The Character of Surface Archaeological Deposits and its Influence on Survey Accuracy." L. Wandsnider and E. L. Camilli. Journal of Field Archaeology 19:169-188, 1992.
"Comments on the Case for Full-Coverage Survey." Keith W. Kintigh. In The Archaeology of Regions: A Case for Full-Coverage Survey. S. K. Fish and S. A. Kowalewski, editors. Pp. 237-242. Smithsonian Institution Press, Washington, DC, 1990.
"Conclusions." Suzanne K. Fish and Stephen A. Kowalewski. In The Archaeology of Regions: A Case for Full-Coverage Survey. S. K. Fish and S. A. Kowalewski, editors. Pp. 261-277. Smithsonian Institution Press, Washington, DC, 1990.
"Decision Making in Modern Surveys." S. Plog, F. Plog, and W. Wait. In Advances in Archaeological Method and Theory Vol. 1. M. B. Schiffer, editor. Pp. 383-421. Academic Press, New York, 1978.
"The Design of Archaeological Surveys." M. B. Schiffer, A. P. Sullivan, and T. C. Klinger. World Archaeology 10:1-28, 1978.
"Discovering Sites Unseen." F. P. McManamon. In Advances in Archaeological Method and Theory, Vol. 7. M. B. Schiffer, editor. Pp. 223-292. Academic Press, 1984. New York.
Distributional Archaeology. James Ebert. University of New Mexico Press, Albuquerque, 1992.
"The Effectiveness of Subsurface Testing: A Simulation Approach." Keith W. Kintigh. American Antiquity 53:686-707, 1988.
"The Expanding Role of Surface Assemblages in Archaeological Research." Dennis E. Lewarch and Michael J. O'Brien. Advances in Archaeological Method and Theory, Vol. 4. M. B. Schiffer, editor. Pp. 297-342. Academic Press, New York, 1981.
Field Methods in Archaeology, 7th edition. Thomas R. Hester, Harry J. Shafer, and Kenneth L. Feder. Mayfield Publishing Company, Mountain View, CA, 1997.
"Geophysical Exploration for Archaeology: An Introduction to Geophysical Exploration." Bruce W. Bevan. Midwest Archeological Center Special Report No. 1. Department of the Interior, National Park Service, Midwest Archeological Center, Lincoln, Nebraska, 1998.
Guidelines for Local Surveys: A Basis for Preservation Planning (WordPerfect file or .zip file) Anne Derry, H. Ward Jandl, Carol Shull and Jan Thorman. National Register Division, U.S. Department of the Interior, 1978, revised 1985.
Historical Archaeology. Charles E. Orser, Jr. and Brian M. Fagan. HarperCollins College Publishers, New York, 1995.
Interpreting Space: GIS and Archaeology. Kathleen M. S. Allen, Stanton W. Green, and Ezra B. W. Zubrow, editors. Taylor and Francis, New York, 1990.
Principles of Archaeological Stratigraphy. E.C. Harris. 2nd ed. Academic Press Inc, San Diego, 1989.
"Red Flag Models: The Use of Modelling in Management Contexts." Jeffery H. Altschul. In Interpreting Space: GIS and Archaeology. Kathleen M. S. Allen, Stanton W. Green, and Ezra B. W. Zubrow, editors. Pp. 226-238. Taylor and Francis, New York, 1990.
"Regional Surveys in the Eastern United States: The Strengths and Weaknesses of Implementing Subsurface Testing Programs." K. G. Lightfoot. American Antiquity 51(3):484-504, 1986.
"Sampling in Archaeological Surveys: A Critique." S. Plog. American Antiquity 38(1):280-285, 1978.
"A Shot in the Dark: Shott's Comments on Nance and Ball." Jack D. Nance and Bruce F. Ball. American Antiquity 54 (2):405-412, 1989.
"Shovel Test Sampling as a Site Discovery Technique: A Case Study from Michigan." Michael J. Shott. Journal of Field Archaeology 12:458-469, 1985.
"Shovel-test Sampling in Archaeological Survey: Comments on Nance and Ball, and Lightfoot." Michael J. Shott. American Antiquity 54:396-404, 1989.
"The Siteless Survey: A Regional Scale Data Collection Strategy." R. Dunnell and W. Dancey. In Advances in Archaeological Method and Theory, Vol. 5. M. B. Schiffer, editor. Pp. 267-287. Academic Press, New York, 1983.
"Surface Collection, Sampling, and Research Design: A Retrospective." C. L. Redman. American Antiquity 52(2):249-265, 1987.
"Survey Design, Theory." Allen P. Sullivan III. In Archaeological Method and Theory: An Encyclopedia, Linda Ellis, editor. Pp. 600-605. Garland Publishing, Inc., New York, 2000.
"Surveying and Site Examination, Manual Methods." Francis P. McManamon. In Archaeological Method and Theory: An Encyclopedia. Linda Ellis, editor. Pp. 605-609. Garland Publishing, Inc., New York, 2000.
Property Types:
Guidelines for Identifying, Evaluating and Registering Aids to Navigation (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1990.
Guidelines for Evaluating and Documenting Historic Aviation Properties. Department of the Interior, National Park Service, National Register, History and Education, 1998.
Guidelines for Identifying, Evaluating and Registering America's Historic Battlefields. Department of the Interior, National Park Service, National Register, History and Education, 1992.
Guidelines for Evaluating and Registering Cemeteries and Burial Place. Department of the Interior, National Park Service, National Register, History and Education, 1992.
How to Evaluate and Nominate Designed Historic Landscapes. Department of the Interior, National Park Service, National Register, History and Education, 1990.
Guidelines for Evaluating and Registering Historical Archeological Sites (WordPerfect file or .zip file). Department of the Interior, National Park Service, National Register, History and Education, 1992, revised 1999.
Guidelines for Identifying, Evaluating and Registering Historic Mining Properties. Department of the Interior, National Park Service, National Register, History and Education, 1992, revised 1997, 1999.
How to Apply the National Register Criteria for Post Offices (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1984, revised 1994.
Guidelines for Evaluating and Nominating Properties that Have Achieved Siginificance in the Past Fifty Years. Department of the Interior, National Park Service, National Register, History and Education, 1979, revised, 1990, 1996, 1998.
Guidelines for Evaluating and Documenting Rural Historic Landscapes. Department of the Interior, National Park Service, National Register, History and Education, 1991, revised 1999.
Guidelines for Evaluating and Documenting Properties Associated with Significant Persons. Department of the Interior, National Park Service, National Register, History and Education, 1989.
Guidelines for Evaluating and Documenting Traditional Cultural Properties. Department of the Interior, National Park Service, National Register, History and Education, 1990, revised 1992, 1998.
Nominating
Historic Vessels and Shipwrecks to the National Register of Historic Places.
Department of the Interior, National Park Service, National Register, History
and Education, 1992.
The
Archeological Survey: Methods and Uses. Thomas F. King. Interagency Archeological
Services, U.S. Department of the Interior, 1978. Washington, D.C. Available
through the Superintendent of Documents, U.S. Government Printing Office, Washington,
D.C. 20402. GPO stock number 024-016-00091. Written primarily for the non-archeologist,
this publication presents methods and objectives for archeological surveys.
Cultural Resources
Evaluation of the Northern Gulf of Mexico Continental Shelf. National Park
Service, U.S. Department of the Interior, 1977.
The Process of Field
Research: Final Report on the Blue Ridge Parkway Folklife Project. American
Folklife Center, 1981.
Regional Sampling
in Archeology. David Hurst Thomas. University of California, Archeological
Survey Annual Report, 1968-9, 11:87-100.
Remote Sensing: A
Handbook for Archeologists and Cultural Resource Managers. Thomas R. Lyons
and Thomas Eugene Avery. Cultural Resource Management Division, National Park
Service, U.S. Department of the Interior, 1977.
Remote Sensing and
Non-Destructive Archeology. Thomas R. Lyons and James L. Ebert, editors.
Remote Sensing Division, Southwest Cultural Resources Center, National Park
Service, U.S. Department of the Interior and University of New Mexico, 1978.
Remote Sensing Experiments
in Cultural Resource Studies: Non-Destructive Methods of Archeological Exploration,
Survey and Analysis. Thomas R. Lyons, assembler. Reports of the Chaco Center,
Number One. National Park Service, U.S. Department of the Interior and University
of New Mexico, 1976.
Sampling in Archeology.
James W. Mueller, editor. University of Arizona Press, 1975. Tucson, Arizona.
Scholars as Contractors.
William J. Mayer-Oakes and Alice W. Portnoy, editors. Cultural Resource Management
Studies. U.S. Department of the Interior, 1979.
Sedimentary Studies
of Prehistoric Archeological Sites. Sherwood Gagliano, Charles Pearson,
Richard Weinstein, Diana Wiseman, and Christopher McClendon. Division of State
Plans and Grants, National Park Service, U.S. Department of the Interior, 1982.
Washington, D.C. Available from Coastal Environments Inc., 1260 Main Street,
Baton Rouge, Louisiana 70802. Establishes and evaluates a method for employing
sedimentological analysis in distinguishing site areas from non-site areas when
identifying submerged archeological sites on the continental shelf.
State Survey Forms.
Available from Interagency Resource Management Division, National Park Service,
U.S. Department of the Interior, Washington, D.C. 20240. Characterizes cultural
resource survey documentation methods in State Historic Preservation Offices.
Truss Bridge Types:
A Guide to Dating and Identifying. Donald C. Jackson and T. Allan Comp.
American Association for State and Local History, 1977. Nashville, Tennessee.
Technical leaflet #95. Available from AASLH, 172 Second Avenue North, Nashville,
Tennessee 37201. Information about performing surveys of historic bridges and
identifying the types of properties encountered.
Archeology
& Ethnography Program
National
Register of Historic Places
Society
for Historical Archaeology
Society
of American Archaeology
State
Historic Preservation Offices (SHPO)
Many SHPO Offices have prepared survey manuals and guides for survey projects,
many of which might be available.
Secretary of the Interior's Standards for Evaluation
Evaluation is the process of determining whether identified properties meet defined criteria of significance and therefore should be included in an inventory of historic properties determined to meet the criteria. The criteria employed vary depending on the inventory's use in resource management.
Standard I. Evaluation of the Significance of Historic Properties Uses Established Criteria
The evaluation of historic properties employs criteria to determine which properties are significant. Criteria should therefore focus on historical, architectural, archeological, engineering and cultural values, rather than on treatments. A statement of the minimum information necessary to evaluate properties against the criteria should be provided to direct information gathering activities.
Because the National Register of Historic Places is a major focus of preservation activities on the Federal, State and local levels, the National Register criteria have been widely adopted not only as required for Federal purposes, but for State and local inventories as well. The National Historic Landmark criteria and other criteria used for inclusion of properties in State historic site files are other examples of criteria with different management purposes.
Standard II. Evaluation of Significance Applies the Criteria Within Historic Contexts
Properties are evaluated using a historic context that identifies the significant patterns that properties represent and defines expected property types against which individual properties may be compared. Within this comparative framework, the criteria for evaluation take on particular meaning with regard to individual properties.
Standard III. Evaluation Results in A List or Inventory of Significant Properties That Is Consulted In Assigning Registration and Treatment Priorities
The evaluation process and the subsequent development of an inventory of significant properties is an on-going activity. Evaluation of the significance of a property should be completed before registration is considered and before preservation treatments are selected. The inventory entries should contain sufficient information for subsequent activities such as registration or treatment of properties, including an evaluation statement that makes clear the significance of the property within one or more historic contexts.
Standard IV. Evaluation Results Are Made Available to the Public
Evaluation is the basis
of registration and treatment decisions. Information about evaluation decisions
should be organized and available for use by the general public and by those
who take part in decisions about registration and treatment. Use of appropriate
computer-assisted data bases should be a part of the information dissemination
effort. Sensitive information, however, must be safeguarded from general public
distribution.
Introduction
These Guidelines link the Standards for Evaluation with more specific guidance and technical information. These Guidelines describe one approach to meeting the Standards for Evaluation. Agencies, organizations, or individuals proposing to approach evaluation differently may wish to review their approach with the National Park Service.
The Guidelines are organized
as follows:
The Evaluation Process
Criteria
Application of Criteria within a Historic Context
Inventory
Recommended Sources of Technical Information
These Guidelines describe principles for evaluating the significance of one or more historic properties with regard to a given set of criteria.
Groups of related properties should be evaluated at the same time whenever possible; for example, following completion of a theme study or community survey.
Evaluation should not be undertaken using documentation that may be out of date. Prior to proceeding with evaluation the current condition of the property should be determined and previous analyses evaluated in light of any new information.
Evaluation must be performed by persons qualified by education, training and experience in the application of the criteria. Where feasible, evaluation should be performed in consultation with other individuals experienced in applying the relevant criteria in the geographical area under consideration; for example, the State Historic Preservation Officer or local landmarks commission.
Evaluation is completed with a written determination that a property is or is not significant based on provided information. This statement should be part of the record.
The purposes of evaluation criteria should be made clear. For example, the criteria may be used "to evaluate properties for inclusion in the county landmarks list," or "to implement the National Register of Historic Places program."
For Federal cultural resource management purposes, criteria used to develop an inventory should be coordinated with the National Register criteria for evaluation as implemented in the approved State comprehensive historic preservation plan.
Content of Criteria: Criteria should be appropriate in scale to the purpose of the evaluation. For example, criteria designed to describe national significance should not be used as the basis for creating a county or State inventory. Criteria should be categorical and not attempt to describe in detail every property likely to qualify. Criteria should outline the disciplines or broad areas of concern (history, archeology, architectural history, engineering and culture, for example) included within the scope of the inventory; explain what kinds of properties, if any, are excluded and the reasons for exclusion; and define how levels of significance are measured, if such levels are incorporated into the criteria. If the criteria are to be used in situations where the National Register criteria are also widely used, it is valuable to include a statement explaining the relationship of the criteria used to the National Register criteria, including how the scope of the inventory differs from that defined by the National Register criteria and how the inventory could be used to identify properties that meet the National Register criteria.
Information Needed to Evaluate Properties: The criteria should be accompanied by a statement defining the minimum information necessary to evaluate properties to insure that this information is collected during identification activities intended to locate specific historic properties. Generally, at least the following will be needed:
1. Adequately developed historic contexts, including identified property types. (See the Guidelines for Preservation Planning for discussion of development of historic contexts.)
2. Sufficient information about the appearance, condition and associative values of the property to be evaluated to:
a. Classify it as to
property type;
b. Compare its features or characteristics with those expected for its property
type; and
c. Define the physical extent of the property and accurately locate the
property.
Usually documentation need not include such items as a complete title history or biography of every owner of a property, except where that information is important in evaluating its significance. Information on proposed or potential treatments or threats, such as destruction of a property through uncontrollable natural processes, is also not needed for evaluation, unless those effects are likely to occur prior to or during the evaluation, thereby altering the significant characteristic of the property. If archeological testing or structural analysis is needed for evaluation, it should not proceed beyond the point of providing the information necessary for evaluation and should not unnecessarily affect significant features or values of the property.
When more information is needed: Evaluation cannot be conducted unless all necessary information is available. (See Information Needed to Evaluate Properties.) Any missing information or analysis should be identified (e.g. development of context or information on the property) as well as the specific activities required to obtain the information (archival research, field survey and testing, or laboratory testing). When adequate information is not available, it is important to record that fact so that evaluation will not be undertaken until the information can be obtained. In some cases needed information is not obtainable, for example, where historical records have been destroyed or analytical techniques have not been developed to date materials in archeological sites. If an evaluation must be completed in these cases, it is important to acknowledge what information was not obtainable and how that missing information may affect the reliability of the evaluation.
Application of the Criteria within a Historic Context
The first step in evaluation is considering how the criteria apply to the particular historic context. This is done by reviewing the previously developed narrative for the historic context and determining how the criteria would apply to properties in that context, based on the important patterns, events, persons and cultural values identified. (See the discussion of the historic context narrative in the Guidelines for Preservation Planning.) This step includes identification of which criteria each property type might meet and how integrity is to be evaluated for each property type under each criterion. Specific guidelines for evaluating the eligibility of individual properties should be established. These guidelines should outline and justify the specific physical characteristics or data requirements that an individual property must possess to retain integrity for the particular property type; and define the process by which revisions or additions can be made to the evaluation framework.
Consideration of property type and integrity: After considering how the criteria apply to the particular historic context, the evaluation process for a property generally includes the following steps:
2. A comparison is made between the existing information about the property and the integrity characteristics or data required for the property type.
b. If the comparison shows that the property does not meet the minimum requirements, one of several conclusions is reached:
The integrity of the property in its current condition, rather than its likely condition after a proposed treatment, should be evaluated. Factors such as structural problems, deterioration, or abandonment should be considered in the evaluation only if they have affected the integrity of the significant features or characteristics of the property.
An inventory is a repository of information on specific properties evaluated as significant.
Content: The inventory should include:
Maintenance: Inventory entries should be maintained so that they accurately represent what is known about historic properties in the area covered by the inventory. This will include new information gained from research and survey about the historic contexts, property types, and previously evaluated properties, as well as information about newly evaluated properties. For individual properties, addition of kinds of significance, change in the boundaries, or loss of significance through demolition or alteration should be recorded.
Uses and Availability: An inventory should be managed so that the information is accessible. Its usefulness depends on the organization of information and on its ability to incorporate new information. An inventory should be structured so that entries can be retrieved by locality or by historic context.
The availability of the inventory information should be announced or a summary should be distributed. This may be in the form of a list of properties evaluated as significant or a summary of the historic contexts and the kinds of properties in the inventory. Inventories should be available to managers, planners, and the general public at local, State, regional, and Federal agency levels.
It is necessary to protect information about archeological sites or other properties whose integrity may be damaged by widespread knowledge of their location. It may also be necessary to protect information on the location of properties such as religious sites, structures, or objects whose cultural value would be compromised by public knowledge of the property's location.
Recommended
Sources of Technical Information
Current Recommendations
Archaeological Method and Theory: An Encyclopedia. Linda Ellis, editor. Garland Publishing, Inc., New York, 2000.
Cultural Resource Significance Evaluation: Proceedings of a U.S. Army Corps of Engineers Workshop 3-4 October 1994, Vicksburg, Mississippi. Frederick L. Briuer and Clay Mathers, editors. US. Army Corps of Engineers, IWR Report 96-EL-3, 1996.
Defining Boundaries for National Register Properties (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1995.
Geophysical Exploration for Archaeology: An Introduction to Geophysical Exploration. Bruce W. Bevan. Midwest Archeological Center Special Report No. 1. Department of the Interior, National Park Service, Midwest Archeological Center, Lincoln, Nebraska, 1998.
"Other Questions that Count: Introductory Comments on Assessing Significance in Historical Archaeology." William B. Lees and Vergil E. Noble. Historical Archaeology 24(2):10-13, 1990.
Researching a Historic Property. Department of the Interior, National Park Service, National Register, History and Education, 1991, revised 1998.
Settler Communities in the West: Historic Contexts for Cultural Resource Managers of Department of Defense Lands. Robert Lyon, editor. National Park Service, Rocky Mountain Region, 1994.
National Park Service, 1994, Thematic Framework. Department of the Interior, National Park Service.
Trends and Patterns in Cultural Resource Significance: An Historical Perspective and Annotated Bibliography (.pdf file). Frederick L. Briuer and Clay Mathers. U.S. Army Corps of Engineers Water Resources Support Center IWR Report 96-EL-1, 1996.
Property Types:
Guidelines for Identifying, Evaluating and Registering Aids to Navigation (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1990.
Guidelines for Evaluating and Documenting Historic Aviation Properties. Department of the Interior, National Park Service, National Register, History and Education, 1998.
Guidelines for Identifying, Evaluating and Registering America's Historic Battlefields. Department of the Interior, National Park Service, National Register, History and Education, 1992.
Guidelines for Evaluating and Registering Cemeteries and Burial Place. Department of the Interior, National Park Service, National Register, History and Education, 1992.
How to Evaluate and Nominate Designed Historic Landscapes. Department of the Interior, National Park Service, National Register, History and Education, 1990.
Guidelines for Evaluating and Registering Historical Archeological Sites (WordPerfect file or .zip file). Department of the Interior, National Park Service, National Register, History and Education, 1992, revised 1999.
Guidelines for Identifying, Evaluating and Registering Historic Mining Properties. Department of the Interior, National Park Service, National Register, History and Education, 1992, revised 1997, 1999.
How to Apply the National Register Criteria for Post Offices (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1984, revised 1994.
Guidelines for Evaluating and Nominating Properties that Have Achieved Siginificance in the Past Fifty Years. Department of the Interior, National Park Service, National Register, History and Education, 1979, revised 1990, 1996, 1998.
Guidelines for Evaluating and Documenting Rural Historic Landscapes. Department of the Interior, National Park Service, National Register, History and Education, 1991, revised 1999.
Guidelines for Evaluating and Documenting Properties Associated with Significant Persons. Department of the Interior, National Park Service, National Register, History and Education, 1989.
Guidelines for Evaluating and Documenting Traditional Cultural Properties. Department of the Interior, National Park Service, National Register, History and Education, 1990, revised 1992, 1998.
Nominating Historic Vessels and Shipwrecks to the National Register of Historic Places. Department of the Interior, National Park Service, National Register, History and Education, 1992.
How to Apply the National
Register Criteria. Available through the National Register Branch, Interagency
Resources Division, National Park Service, U.S. Department of the Interior,
Washington, D.C. 20240. Provides detailed technical information about interpretation
of the significance and integrity criteria used by the National Register of
Historic Places program.
How To Series.
Available through the National Register Branch, Interagency Resources Division,
National Park Service, U.S. Department of the Interior, Washington, D.C. 20240.
Discusses application of the National Register criteria for evaluation.
Titles include:
How To Establish Boundaries
for National Register Properties.
How To Evaluate and
Nominate Potential National Register Properties That Have Achieved Significance
Within the Last 50 Years.
How To Improve Quality
of Photos for National Register Nominations.
How to Apply for Certification
of Significance Under Section 2124 of the Tax Reform Act of 1976.
How To Apply for Certification
of State and Local Statutes and Historic Districts.
How To Qualify Historic
Properties Under the New Federal Law Affecting Easements.
Importance of Small,
Surface, and Disturbed Sites as Sources of Significant Archeological Data.
Valerie Talmage and Olga Chesler. Interagency Archeological Service, 1977. Washington,
D.C. Available from the National Technical Information Service. NTIS Publication
Number PB 270939/AS. Discusses the role of small, surface, and disturbed sites
as sources of significant information about a variety of prehistoric activities.
These types of sites are frequently ignored in the development of regional archeological
research designs.Archeology
& Ethnography Program
National
Register of Historic Places
Registration is the formal recognition of properties evaluated as significant. Preservation benefits provided by various registration programs range from honorific recognition to prohibition of demolition or alteration of included properties. Some registration programs provide recognition and other broad benefits while other programs authorize more specific forms of protection.
Standard I. Registration Is Conducted According To Stated Procedures
Registration of historic properties in the National Register of Historic Places must be done in accordance with the National Register regulations published in the Code of Federal Regulations, 36 CFR 60. Registration for other lists or purposes follow an established process that is understood by the public, particularly by those interests that may be affected by registration.
Standard II. Registration Information Locates, Describes and Justifies the Significance and Physical Integrity of a Historic Property
Registers are used for planning, research and treatment. They must contain adequate information for users to locate a property and understand its significance. Additional information may be appropriate depending on the intended use of the register.
Standard III. Registration Information Is Accessible to the Public
Information should be readily
available to the public and to government agencies responsible for the preservation
of historic properties and for other planning needs.
Introduction
These Guidelines link the Standards for Registration with more specific guidance and technical information. They describe one approach to meeting the Standards for Registration. Agencies, organizations, or individuals proposing to approach registration differently may wish to review their approach with the National Park Service.
The Guidelines are
organized as follows:
Purpose of Registration Programs
Registration Procedures
Documentation on Registered Properties
Public Availability
Recommended Sources of Technical Information
Purpose of Registration Programs
Registration of historic properties is the formal recognition of properties that have been evaluated as significant according to written criteria. Registration results in an official inventory or list that serves an administrative function. A variety of benefits or forms of protection accrue to a registered property, ranging from honorific recognition to prohibition of demolition or alteration.
Some registration programs provide recognition and other broad benefits or entitlement, while other registrations of properties may, in addition, authorize more specific forms of protection. The application of the registration process should be a logical outgrowth of the same planning goals and priorities that guided the identification and evaluation activities. All registration programs should establish priorities for recognition of their authorized range of properties; provide for confidentiality of sensitive information; and establish a means of appealing the registration or non-registration of a property.
Explicit procedures are essential because they are the means by which the public can understand and participate in the registration process. Procedures for registration programs should be developed by professionals in the field of historic preservation, in consultation with those who will use or be affected by the program. Prior to taking effect, procedures should be published or circulated for comment at the governmental level at which they will be used. (Procedures for registration of properties in the National Register of Historic Places and the National Historic Landmarks list, for example, are published in the Federal Register.)
Any registration program should include:
Professional Review: The registration process should include an independent evaluation of the significance of the property and of the quality and thoroughness of the documentation supporting that significance. Such evaluation ensures that significance is adequately justified and that registration documentation meets the technical requirements of the registration process.
State and local preservation programs, concerned with both public and private properties, generally use a review board, panel or commission. This level of professional review has proven to be effective in assessing the significance of properties considered for registration.
Review boards and other forms of independent review should include professionals in the fields or disciplines included in the criteria; representatives of other fields or disciplines may be desirable to reflect other values or aspects of the register. Key personnel must be qualified by education, training or experience to accomplish their designated duties (See the Professional Qualifications Standards.)
The scope of the independent review should be clearly stated in the registration procedures and should not include issues outside the scope of the applicable criteria for evaluation and other areas specified in the procedures. Generally, independent reviewers should not be involved in any primary research or analysis related to properties under consideration; this information should be gathered and organized prior to review meetings. Documentation presented to the reviewers should be made available to the public prior to review meetings or public hearings. Registration of properties should not take place until review of documentation has been completed.
Public Notice: Adequate notice allows property owners, officials and other interested parties to comment on proposed registrations prior to action by the independent reviewers. The degree of protection and control provided by a registration program may be a factor in determining what constitutes adequate notice. For example, adequate notice of proposed inclusion in honorific registers may be less complex than that for registration that results in local controls on alteration or demolition of registered properties.
Notice to elected officials and the public is necessary to distribute information about potential registrations of concern to planning and development interests.
Adequate notice to property owners may be accomplished through means ranging from individual notification by mail to publication of a public notice, depending on the nature of the registration program and the number and character of the properties involved.
Public notices and owner notification about proposed registrations should include the dates and times of public meetings and review meetings, the kinds of comments that are appropriate, and how comments will be considered in the evaluation process. The notice should also state where information can be obtained about the registration program, the criteria used to evaluate properties for inclusion, and the significance of specific properties under consideration.
The procedures should include a means of public participation in the form of submission of written comments or a review meeting open to the public or a public hearing.
The procedures should state time periods within which reviews, notices, comments, public hearings, review meetings and appeals will occur. The time periods should be short enough to allow for efficient recognition of historic properties but also allow adequate time for public comment and participation by those affected. Time periods may vary depending on whether activities are carried out at the local, State, or national level. These time schedules should be widely circulated so that the process is widely understood.
Appeal Process: A means of appeal should be included in the registration process to allow for reconsideration of a property's inclusion. Reasons for appeal may range from existence of additional information about the property supporting or refuting its significance to administrative or procedural error. An appeal process should specify to whom an appeal may be made and how the information that is provided will be evaluated. The appeal procedures should also state the time limit, if any, on appealing a decision and on consideration of information and issuance of a decision by the appeal authority.
Documentation on Registered Properties
Documentation requirements should be carefully weighed to provide the information actually needed to reach a registration decision and should be made public. It should be made certain that identification and evaluation activities obtain and record the information necessary for registration. Documentation should be prepared in a standardized format and on materials that are archivally stable and easy to store and retrieve.
Location: The precise location of a historic property must be clearly identified.
Street address, town or vicinity, and county should be provided. Properties should also be located on maps; these may be USGS maps, county planning maps or city base maps or real estate maps. A uniform system of noting location, such as UTM grid points or longitude and latitude, should supplement mapping. It is recommended that each registration process standardize the preferred choice of maps appropriate to the scope of the process.
Description: An accurate description of a property includes a description of both the current and historical physical appearance and condition of the property and notes the relevant property type(s) for the applicable historic context(s). Discussion should include alterations, deterioration, relocation and other changes to the property since its period of significance.
Significance: A statement of significance should explain why a property meets the criteria for inclusion in the register to which it has been nominated.
This statement should contain at least 3 elements:
Relevant historic contexts can be identified through reference to the preservation plan or other documents where the contexts have been previously described or can be provided by a narrative discussion of the context. (The development of contexts and their use in evaluating properties are discussed in the Guidelines for Preservation Planning and the Guidelines for Evaluation.) A significant property type and its characteristics are identified either through reference to the historic context(s) or by a narrative in the documentation that describes historic contexts. Justification of a specific property is made by systematic comparison of its characteristics to those required for the property type.
Boundaries: The delineation and justification of boundaries for a registered property are important for future treatment activities. It is especially critical when legal restraints or restrictions may result from the registration of properties. Thus, boundaries should correspond as closely as possible to the actual extent and configuration of the property and should be carefully selected to encompass, but not exceed, the extent of the significant resource(s). The selection of boundaries should reflect the significant aspects of the property.
Arbitrary boundaries should not be chosen for ease of description since this can result in the inclusion of unrelated land or in exclusion of a portion of the historic property. Present property lines should not be chosen as property boundaries without careful analysis of whether they are appropriate to the historic property. A single uniform boundary description and acreage should not be applied to a group or class of properties (antebellum plantations, for example) without examination of the actual extent of each property. The selected boundaries should be justified as appropriate to the historic property.
Boundaries should be clearly and precisely described, using a verbal boundary description, legal description, accurate sketch map, or lines drawn on base maps, or a combination of these where needed to specify the limits of the property being registered. When used, maps should show the location of buildings, structures, sites or objects within the boundary.
Updating Information on Registered Properties: A change in the condition of the significant features of a property may require a change in the official registration record. Alteration of a significant architectural feature, for example, could mean that a property is no longer significant for its architectural design.
Additional significance of registered properties may be identified through development of new historic contexts. Research may reveal that a property is significant in other historic contexts or is significant at a higher level. For example, a property previously recognized as of local significance could be found to be of national significance.
A change in location or condition of a registered property may mean that the property is no longer significant for the reasons for which it was registered and the property should be deleted from the registered list.
Lists of registered properties should be readily available for public use, and information on registered properties should be distributed on a regular basis. Lists of properties registered nationally are distributed through publication in the Federal Register and to Congressional Offices and State Historic Preservation Offices. Comprehensive information should be stored and maintained for public use at designated national, State and local authorities open to the public on a regular basis.
Information should be retrievable
by the property name, and location, historic context or property type. The specific
location of properties that may be threatened by dissemination of that information
must be withheld. These may include fragile archeological properties or properties
such as religious sites, structures, or objects whose cultural value would be
compromised by public knowledge of the property location.
Recommended
Sources of Technical Information
Current Recommendations
How to Complete the National Register Registration Form. Department of the Interior, National Park Service, National Register, History and Education, 1977, revised 1986, 1991, 1997, 1999.
How to Complete the National Register Multiple Property Documentation Form. Department of the Interior, National Park Service, National Register, History and Education, 1991, revised 1998.
How to Prepare National Historic Landmark Nominations (online order form). Department of the Interior, National Park Service, National Register, History and Education, 1999.
Researching a Historic Property. Department of the Interior, National Park Service, National Register, History and Education, 1991, revised 1998.
Defining Boundaries for National Register Properties (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1995.
How to Improve the Quality of Photographs for National Register Nominations (online order form). Department of the Interior, National Park Service, National Register, History and Education, 1997.
Using the UTM Grid System to Record Historic Sites. Department of the Interior, National Park Service, National Register, History and Education, 1977.
Property Types:
Guidelines for Identifying, Evaluating and Registering Aids to Navigation (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1990.
Guidelines for Evaluating and Documenting Historic Aviation Properties. Department of the Interior, National Park Service, National Register, History and Education, 1998.
Guidelines for Identifying, Evaluating and Registering America's Historic Battlefields. Department of the Interior, National Park Service, National Register, History and Education, 1992.
Guidelines for Evaluating and Registering Cemeteries and Burial Place. Department of the Interior, National Park Service, National Register, History and Education, 1992.
How to Evaluate and Nominate Designed Historic Landscapes. Department of the Interior, National Park Service, National Register, History and Education, 1990.
Guidelines for Evaluating and Registering Historical Archeological Sites (WordPerfect file or .zip file). Department of the Interior, National Park Service, National Register, History and Education, 1992, revised 1999.
Guidelines for Identifying, Evaluating and Registering Historic Mining Properties. Department of the Interior, National Park Service, National Register, History and Education, 1992, revised 1997, 1999.
How to Apply the National Register Criteria for Post Offices (WordPerfect file). Department of the Interior, National Park Service, National Register, History and Education, 1984, revised 1994.
Guidelines for Evaluating and Nominating Properties that Have Achieved Siginificance in the Past Fifty Years. Department of the Interior, National Park Service, National Register, History and Education, 1979, revised 1990, 1996, 1998.
Guidelines for Evaluating and Documenting Rural Historic Landscapes. Department of the Interior, National Park Service, National Register, History and Education, 1991, revised 1999.
Guidelines for Evaluating and Documenting Properties Associated with Significant Persons. Department of the Interior, National Park Service, National Register, History and Education, 1989.
Guidelines for Evaluating and Documenting Traditional Cultural Properties. Department of the Interior, National Park Service, National Register, History and Education, 1990, revised 1992, 1998.
Nominating Historic Vessels and Shipwrecks to the National Register of Historic Places. Department of the Interior, National Park Service, National Register, History and Education, 1992.
How
to Complete the National Register Form. National Register Division,
National Park Service, US. Department of the Interior, 1977. Washington, D.C.
Available through the Superintendent of Documents, US Government Printing Office,
Washington, D.C. 20402. GPO Stock Number 024005- 00666-4. This publication is
the standard reference on the documentation requirements of the National Register
of Historic Places program.
How To Series.
Available through the National Register Branch, Interagency Resources Division,
National Park Service, U.S. Department of the Interior, Washington, DC 20240.
These information sheets contain supplementary information about interpreting
the National Register criteria for evaluation and documentation requirements
of the National Register registration program. Titles include:
How To Establish
Boundaries for National Register Properties.
How To Evaluate and
Nominate Potential National Register Properties that Have Achieved Significance
Within the Last 50 Years.
How To Improve the
Quality of Photographs for National Register Nominations.
How To Apply for
Certification of Significance Under Section 2124 of the Tax Reform Act of 1976.
How To Apply for
Certification of State and Local Statutes and Historic Districts.
How To Qualify Historic
Properties Under the New Federal Law Affecting Easements.
National Register of Historic Places
National Register Information System (NRIS)
Note on Documentation and Treatment of Historic Properties
Documentation and treatment of historic properties includes a variety of techniques to preserve or protect properties, or to document their historic values and information. While documentation activities may be applied to any potentially historic property, generally only those properties that first have been evaluated as significant against specified criteria (such as those of the National Register) are treated. Some commonly applied treatments are preservation in place, rehabilitation, restoration and stabilization; there are other types of treatments also. Documentation and treatment may be applied to the same property; for example, archeological historical, and architectural documentation may be prepared before a structure is stabilized or before foundations or chimneys or other lost features are reconstructed.
Alternatives for treatment will usually be available, and care should be applied in choosing among them. Preservation in place is generally preferable to moving a property. Over time, the preferred treatment for a property may change; for example, an archeological site intended for preservation in place may begin to erode so that a combination of archeological documentation and stabilization may be required. If a decision is made that a particular property will not be preserved in place, the need for documentation must then be considered.
The three sets of documentation
standards (i.e., the Standards for Historical Documentation, Standards for Architectural
and Engineering Documentation, and Standards for Archeological Documentation)
as well as the Standards for Historic Preservation Projects (Acquisition,
Preservation, Stabilization, Protection, Rehabilitation, Restoration, and Reconstruction)
[the Secretary of the Interior's Standards for the Treatment of Historic Properties
(Preservation, Rehabilitation, Restoration, Reconstruction)] describe the techniques
of several disciplines to treat historic properties, and to document or preserve
information about their historical values. The integration of planning for documentation
and treatment with their execution is accomplished in a statement of objectives,
or research design. Because both the goals and appropriate methodologies are
likely to be interdisciplinary in nature, the relationship among these various
activities should be specified in the research design to ensure that the resulting
documentation produces a comprehensive record of historic properties in an efficient
manner.
Secretary of the Interior's Standards for Historical Documentation
Historic documentation provides important information related to the significance of a property for use by historians, researchers, preservationists, architects, and historical archeologists. Research is used early in planning to gather information needed to identify and evaluate properties. (These activities are discussed in the Standards and Guidelines for Preservation Planning and the Standards and Guidelines for Identification.) Historical documentation is also a treatment that can be applied in several ways to properties previously evaluated as significant; it may be used in conjunction with other treatment activities (as the basis for rehabilitation plans or interpretive programs, for example) or as a final treatment to preserve information in cases of threatened property destruction. These Standards concern the use of research and documentation as a treatment.
Standard I. Historical Documentation Follows a Research Design that Responds to Needs Identified in the Planning Process
Historical documentation is undertaken to make a detailed record of the significance of a property for research and interpretive purposes and for conservation of information in cases of threatened property destruction. Documentation must have defined objectives so that proposed work may be assessed to determine whether the resulting documentation will meet needs identified in the planning process. The research design or statement of objectives is a formal statement of how the needs identified in the plan are to be addressed in a specific documentation project. This is the framework that guides the selection of methods and evaluation of results, and specifies the relationship of the historical documentation efforts to other proposed treatment activities.
Standard II. Historical Documentation Employs an Appropriate Methodology to Obtain the Information Required by The Research Design
Methods and techniques of historical research should be chosen to obtain needed information in the most efficient way. Techniques should be carefully selected and the sources should be recorded so that other researchers can verify or locate information discovered during the research.
Standard III. The Results of Historical Documentation Are Assessed Against the Research Design and Integrated into the Planning Process
Documentation is one product of research; information gathered about the usefulness of the research design itself is another. The research results are assessed against the research design to determine how well they meet the objectives of the research. The results are integrated into the body of current knowledge and reviewed for their implications for the planning process. The research design is reviewed to determine how future research designs might be modified based on the activity conducted.
Standard IV. The Results of Historical Documentation Are Reported and Made Available to the Public
Research results must be
accessible to prospective users. Results should be communicated to the professional
community and the public in reports summarizing the documentation activity and
identifying the repository of additional detailed information. The goal of disseminating
information must be balanced, however, with the need to protect sensitive information
whose disclosure might result in damage to properties.
Introduction
These Guidelines link; the Standards for Historical Documentation with more specific guidance and technical information. They describe one approach to meeting the Standards for Historical Documentation. Agencies, organizations or individuals proposing to approach historical documentation differently may wish to review their approaches with the National Park service.
The Guidelines are
organized as follows:
Historical Documentation Objectives
Research Design
Methods
Integrating Results
Reporting Results
Recommended Sources of Technical Information
Documentation is a detailed record, in the form of a report or other written document, of the historical context(s) and significance of a property. Historical research to create documentation uses archival materials, oral history techniques, ethnohistories, prior research contained in secondary sources and other sources to make a detailed record of previously identified values or to investigate particular questions about the established significance of a property or properties. It is an investigative technique that may be employed to document associative, architectural, cultural or informational values of properties. It may be used as a component of structural recording or archeological investigation, to enable interpretation or to mitigate the anticipated loss of a property through conservation of information about its historical, architectural or archeological significance. Documentation generally results in both greater factual knowledge about the specific property and its values, and in better understanding of the property in its historical context. In addition to increasing factual knowledge about a property and its significance in one historical context, documentation may also serve to link the property to or define its importance in other known or yet-to-be defined historic contexts.
Documentation should incorporate, rather than duplicate, the findings of previous research. Research may be undertaken to identify how a particular property fits into the work of an architect or builder; to analyze the historical relationship among several properties; or to document in greater detail the historical contexts of properties. The kinds of questions investigated will generally depend on what is already known or understood and what information is needed. For example, documentation of a bridge whose technological significance is well understood, but whose role in local transportation history is not, would summarize the information on the former topic and focus research on the associative values of the property. The questions that research seeks to answer through deed, map or archival search, oral history and other techniques may also relate to issues addressed in structural documentation or archeological investigation; for example, the reasons for and history of modification of a building to be the subject of architectural or engineering documentation.
Historical documentation is guided by a statement of objectives, research design or task directive prepared before research is performed. The research design is a useful statement of how proposed work will enhance existing archival data and permits comparison of the proposed work with the results. The purpose of the research design is to define the proposed scope of the documentation work and to define a set of expectations based on the information available prior to the research. Generally, the research design also ensures that research methods are commensurate with the type, quality and source of expected information. The research design for a property should identify
Research methods should be chosen based on the information needs, be capable of replication and be recorded so that another researcher could follow the same research procedure. Sources should be recorded so that other researchers can locate or verify the information discovered during the search.
Use of Sources: The variety of available written and graphic materials and the number of individuals that can serve as sources, including but not limited to personal records, deed and title books, newspapers, plats, maps, atlases, photographs, vital records, censuses, historical narratives, interviews of individuals and secondary source materials, should be considered in developing the research design. Part of the development of the research design is deciding what kinds of source materials are most likely to contain needed information and at what point in the research process that information will be most valuable. For example, often secondary sources are most valuable for gathering background information, while primary sources are more useful to gather or confirm specific facts. The documentation goals may not require exhaustive investigation of sources, such as deed records or building permits. Research may be kept cost-effective by making careful decisions about when to use particular sources, thereby limiting the use of time-consuming techniques to when absolutely necessary. Decisions about when to gather information may also affect the quality of information that can be gathered. When dealing with large project areas where loss of many properties is anticipated, it is important to gather information from local archival sources and oral histories before project activities destroy or disperse family or community records and residents.
Analysis of the accuracy and biases of source materials is critical in analyzing the information gathered from these sources. Maps, historical atlases and insurance maps should be assessed like written records for errors, biases and omissions; for example, some map sources may omit structures of a temporary nature or may not fully depict ethnic or minority areas. Likewise, building plans and architectural renderings may not reflect a structure as it was actually built.
Analysis: Analysis should not only focus on the issues defined in the research design, but should also explore major new issues identified during the course of research or analysis. The documentation gathered may raise important issues not previously considered, and further investigation may be important, particularly when contradictory information has been gathered. It is important to examine the implications of these new issues to ensure that they are investigated in a balanced way.
Questions that should be considered in analyzing the information include:
In general, the more the researcher knows about the general historical period and setting and limitations of the source materials under investigation, the better the individual is prepared to evaluate the information found in the documentary sources investigated. Peer review or consultation with other knowledgeable individuals about the information and the tentative conclusions can be an important part of the analysis.
The results of documentation must be integrated into the planning process so that planning decisions are based on the best available information. The new information is first assessed against the research design to determine whether the gathered information meets the defined objectives of the research. Then the relevant historic contexts, property types, and treatment goals for those contexts are all adjusted, as necessary, based on the historical documentation results.
Reports should contain:
Primary results should be preserved and made accessible in some manner, although they need not necessarily be contained in the report. At minimum, the report should reference the location of notes and analyses.
Results of historic documentation
should be made available for use in preservation planning and by the general
public. Report formats may vary, depending on the audience and the anticipated
uses of the documentation, but professionally accepted rules of report writing
should be followed. If reports are of a technical nature, the format of the
major scientific journal of the pertinent discipline may be the most appropriate
format. Peer review of draft reports is one means of ensuring that state-of-the-art
technical reports are produced.
Recommended
Sources of Technical Information
Current Recommendations
Ethics and Public History: An Anthology. Theodore J. Karamanski, editor. Robert E. Krieger Publishing Company, Malabar, Florida, 1990.
The Modern Researcher. 5th Edition. Jacques Barzun and Henry F. Graff. Houghton Mifflin Company, Boston, 1992.
The New American History. Eric Foner, editor. Temple University Press, Philadelphia, 1990.
A Shared Authority: Essays on the Craft and Meaning of Oral and Public History. Michael Frisch. State University of New York Press, Albany, 1990.
Telling the Truth About History. Joyce Appleby, Lynn Hunt, and Margaret Jacob. W.W. Norton & Company, New York, 1994.
The Past Before Us: Contemporary Historical Writing in the United States. Michael Kammen, editor. Cornell University Press, Ithaca, New York, 1982.
Nearby History: Exploring
the Past Around You. David E. Kyvig and Myron A. Marty. The American Association
for State and Local History, Nashville,
Tennessee, 1982.
Folklife and Fieldwork A Layman's Introduction to Field Techniques. Peter Bartis. American Forklift Center, Washington, DC, 1979.
Ordinary People and
Everyday Life: Perspectives on the New Social History. James B. Gardner
and George Rollie Adams, editors. American Association for State and Local History,
Nashville, Tennessee, 1983.
The Process of Field Research. Carl Fleischhauer and Charles K. Wolfe. American Folklife Center, Washington, D.C., 1981.
Researching Heritage
Buildings. Margaret Carter. Ministry of the Environment, Ottawa, Canada,
1983.
National Register of Historic Places
Historic
American Buildings Survey/Historic American Engineering Record (HABS/HAER)
Secretary of the Interior's Standards for Architectural and Engineering Documentation
These standards concern the development of documentation for historic buildings, sites, structures and objects. This documentation, which usually consists of measured drawings, photographs and written data, provides important information on a property's significance for use by scholars, researchers, preservationists, architects, engineers and others interested in preserving and understanding historic properties. Documentation permits accurate repair or reconstruction of parts of a property, records existing conditions for easements, or may present information about a property that is to be demolished.
These Standards are intended for use in developing documentation to be included in the Historic American Building Survey (HABS) and the Historic American Engineering Record (HAER) Collections in the Library of Congress. HABS/HAER, in the National Park Service, have defined specific requirements for meeting these Standards for their collections. The HABS/HAER requirements include information important to development of documentation for other purposes such as State or local archives.
Standard I. Documentation Shall Adequately Explicate and Illustrate What is Significant or Valuable About the Historic Building, Site, Structure or Object Being Documented.
The historic significance of the building, site, structure or object identified in the evaluation process should be conveyed by the drawings, photographs and other materials that comprise documentation. The historical, architectural, engineering or cultural values of the property together with the purpose of the documentation activity determine the level and methods of documentation. Documentation prepared for submission to the Library of Congress must meet the HABS/HAER Guidelines.
Standard II. Documentation Shall be Prepared Accurately From Reliable Sources With Limitations Clearly Stated to Permit Independent Verification of the Information.
The purpose of documentation is to preserve an accurate record of historic properties that can be used in research and other preservation activities. To serve these purposes, the documentation must include information that permits assessment of its reliability.
Standard III. Documentation Shall be Prepared on Materials That are Readily Reproducible, Durable and in Standard Sizes.
The size and quality of documentation materials are important factors in the preservation of information for future use. Selection of materials should be based on the length of time expected for storage, the anticipated frequency of use and a size convenient for storage.
Standard IV. Documentation Shall be Clearly and Concisely Produced.
In order for documentation
to be useful for future research, written materials must be legible and understandable,
and graphic materials must contain scale information and location references.
Introduction
These Guidelines link the Standards for Architectural and Engineering Documentation with more specific guidance and technical information. They describe one approach to meeting the Standards for Architectural Engineering Documentation. Agencies, organizations or individuals proposing to approach documentation differently may wish to review their approaches with the National Park Service.
The Guidelines are
organized as follows:
Definitions
Goal of Documentation
The HABS/HAER Collections
Standard I: Content
Standard II: Quality
Standard III: Materials
Standard IV: Presentation
Architectural and Engineering Documentation Prepared for Other
Purposes
Recommended Sources of Technical Information
These definitions are used in conjunction with these Guidelines:
Architectural Data Form-a one page HABS form intended to provide identifying information for accompanying HABS documentation.
Documentation-measured drawings, photographs, histories, inventory cards or other media that depict historic buildings, sites, structures or objects.
Field Photography-photography, other than large-format photography, intended for the purpose of producing documentation, usually 35mm.
Field Records-notes of measurements taken, field photographs and other recorded information intended for the purpose of producing documentation.
Inventory Card-a one page form which includes written data, a sketched site plan and a 35mm contact print dry-mounted on the form. The negative, with a separate contact sheet and index should be included with the inventory card.
Large Format Photographs-photographs taken of historic buildings, sites, structures or objects where the negative is a 4 x 5, 5 x 7" or 8 x 10" size and where the photograph is taken with appropriate means to correct perspective distortion.
Measured Drawings-drawings produced on HABS or HAER formats depicting existing conditions or other relevant features of historic buildings, sites, structures or objects. Measured drawings are usually produced in ink on archivally stable material, such as mylar.
Photocopy-A photograph, with large format negative, of a photograph or drawing.
Select Existing Drawings-drawings of historic buildings, sites, structures or objects, whether original construction or later alteration drawings that portray or depict the historic value or significance.
Sketch Plan-a floor plan, generally not to exact scale although often drawn from measurements, where the features are shown improper relation and proportion to one another.
The Historic American Buildings Survey (HABS) and Historic American Engineering Record (HAER) are the national historical architectural and engineering documentation programs of the National Park Service that promote documentation incorporated into the HABS/HAER collections in the Library of Congress. The goal of the collections is to provide architects, engineers, scholars, and interested members of the public with comprehensive documentation of buildings, sites, structures and objects significant in American history and the growth and development of the built environment.
HABS/HAER documentation usually consists of measured drawings, photographs and written data that provide a detailed record which reflects a property's significance. Measured drawings and properly executed photographs act as a form of insurance against fires and natural disasters by permitting the repair and, if necessary, reconstruction of historic structures damaged by such disasters. Documentation is used to provide the basis for enforcing preservation easement. In addition, documentation is often the last means of preservation of a property, when a property is to be demolished, its documentation provides future researchers access to valuable information that otherwise would be lost.
HABS/HAER documentation is developed in a number of ways. First and most usually, the National Park Service employs summer teams of student architects, engineers, historians and architectural historians to develop HABS/HAER documentation under the supervision of National Park Service professionals. Second, the National Park Service produces HABS/HAER documentation, in conjunction with restoration or other preservation treatment, of historic buildings managed by the National Park Service. Third, Federal agencies, pursuant to Section 110(b) of the National Historic Preservation Act, as amended, record those historic properties to be demolished or substantially altered as a result of agency action or assisted action (referred to as mitigation projects). Fourth, individuals and organizations prepare documentation to HABS/HAER standards and donate that documentation to the HABS/HAER collections. For each of these programs, different Documentation Levels will be set.
The Standards describe the fundamental principles of HABS/HAER documentation. They are supplemented by other material describing more specific guidelines, such as line weights for drawings, preferred techniques for architectural photography, and formats for written data. This technical information is found in the HABS/HAER Procedures Manual.
These Guidelines include important information about developing documentation for State or local archives. The State Historic Preservation Officer or the State library should be consulted regarding archival requirements if the documentation will become part of their collections. In establishing archives, the important questions of durability and reproducibility should be considered in relation to the purposes of the collection.
Documentation prepared for the purpose of inclusion in the HABS/HAER collections must meet the requirements below. The HABS/HAER office of the National Park Service retains the right to refuse to accept documentation for inclusion in the HABS/HAER collections when that documentation does not meet HABS/HAER requirements, as specified below.
1. Requirement: Documentation shall adequately explicate and illustrate what is significant or valuable about the historic building, site, structure or object being documented.
2. Criteria: Documentation shall meet one of the following documentation levels to be considered adequate for inclusion in the HABS/HAER collections.
3. Test: Inspection of the documentation by HABS/HAER staff.
4. Commentary: The HABS/HAER office retains the right to refuse to accept any documentation on buildings, sites, structures or objects lacking historical significance. Generally, buildings, sites, structures or objects must be listed in, or eligible for listing in the National Register of Historic Places to be considered for inclusion in the HABS/HAER collections.
The kind and amount of documentation should be appropriate to the nature and significance of the buildings, site, structure or object being documented. For example, Documentation Level I would be inappropriate for a building that is a minor element of a historic district, notable only for streetscape context and scale. A full set of measured drawings for such a minor building would be expensive and would add little, if any, information to the HABS/HAER collections. Large format photography (Documentation Level III) would usually be adequate to record the significance of this type of building.
Similarly, the aspect of the property that is being documented should reflect the nature and significance of the building, site, structure or object being documented. For example, measured drawings of Dankmar Adler and Louis Sullivan's Auditorium Building in Chicago should indicate not only facades, floor plans and sections, but also the innovative structural and mechanical systems that were incorporated in that building. Large-format photography of Gunston Hall in Fairfax County, Virginia, to take another example, should clearly show William Buckland's hand-carved moldings in the Palladian Room, as well as other views.
HABS/HAER documentation is usually in the form of measured drawings, photographs, and written data. While the criteria in this section have addressed only these media, documentation need not be limited to them. Other media, such as films of industrial processes, can and have been used to document historic buildings, sites, structures or objects. If other media are to be used, the HABS/HAER office should be contacted before recording.
The actual selection of the appropriate documentation level will vary, as discussed above. For mitigation documentation projects, this level will be selected by the National Park Service Regional Office and communicated to the agency responsible for completing the documentation. Generally, Level I documentation is required for nationally significant buildings and structures, defined as National Historic Landmarks and the primary historic units of the National Park Service.
On occasion, factors other than significance will dictate the selection of another level of documentation. For example, if a rehabilitation of a property is planned, the owner may wish to have a full set of as-built drawings, even though the significance may indicate Level II documentation.
HABS Level I measured drawings usually depict existing conditions through the use of a site plan, floor plans, elevations, sections and construction details. HAER Level I measured drawings will frequently depict original conditions where adequate historical material exists, so as to illustrate manufacturing or engineering processes.
Level II documentation differs from Level I by substituting copies of existing drawings, either original or alteration drawings, for recently executed measured drawings. If this is done, the drawings must meet HABS/HAER requirements outlined below. While existing drawings are rarely as suitable as as-built drawings, they are adequate in many cases for documentation purposes. Only when the desirability of having as-built drawings is clear are Level I measured drawings required in addition to existing drawings. If existing drawings are housed in an accessible collection and cared for archivally, their reproduction for HABS/HAER may not be necessary. In other cases, Level I measured drawings are required in the absence of existing drawings.
Level III documentation requires a sketch plan if it helps to explain the structure. The architectural data form should supplement the photographs by explaining what is not readily visible.
Level IV documentation consists of completed HABS/HAER inventory cards. This level of documentation, unlike the other three levels, is rarely considered adequate documentation for the HABS/HAER collections but is undertaken to identify historic resources in a given area prior to additional, more comprehensive documentation.
1. Requirement: HABS and HAER documentation shall be prepared accurately from reliable sources with limitations clearly stated to permit independent verification of information.
2. Criteria: For all levels of documentation, the following quality standards shall be met:
3. Test: Inspection of the documentation by HABS/HAER staff.
4. Commentary: The reliability of the HABS/HAER collections depends on documentation of high quality. Quality is not something that can be easily prescribed or quantified, but it derives from a process in which thoroughness and accuracy play a large part. The principle of independent verification of HABS/HAER documentation is critical to the HABS/HAER collections.
1. Requirement: HABS and HAER documentation shall be prepared on materials that are readily reproducible for ease of access; durable for long storage; and in standard sizes for ease of handling.
2. Criteria: For all levels of documentation, the following material standards shall be met:
3. Test: Inspection of the documentation by HABS/HAER staff.
4. Commentary: All HABS/HAER records are intended for reproduction; some 20,000 HABS/HAER records are reproduced each year by the Library on Congress. Although field records are not intended for quality reproduction, it is intended that they be used to supplement the formal documentation. The basic durability performance standard for HABS/ HAER records is 500 years. Ink on Mylar is believed to meet this standard, while color photography, for example, does not. Field records do not meet this archival standard, but are maintained in the HABS/HAER collections as a courtesy to the collection user.
1. Requirement: HABS and HAER documentation shall be clearly and concisely produced.
2. Criteria: For levels of documentation as indicated below, the following standards for presentation will be used:
3. Test: Inspection of the documentation by HABS/HAER staff.
Architectural and Engineering Documentation Prepared for Other Purposes
Where a preservation planning process is in use, architectural and engineering documentation, like other treatment activities, are undertaken to achieve the goals identified by the preservation planning process. Documentation is deliberately selected as a treatment for properties evaluated as significant, and the development of the documentation program for a property follows from the planning objectives. Documentation efforts focus on the significant characteristics of the property, as defined in the previously completed evaluation. The selection of a level of documentation and the documentation techniques (measured drawings, photography, etc.) is based on the significance of the property and the management needs for which the documentation is being performed. For example, the kind and level of documentation required to record a historic property for easement purposes may be less detailed than that required as mitigation prior to destruction of the property. In the former case, essential documentation might be limited to the portions of the property controlled by the easement, for example, exterior facades; while in the latter case, significant interior architectural features and nonvisible structural details would also be documented.
The principles and content
of the HABS/HAER criteria may be used for guidance in creating documentation
requirements for other archives. Levels of documentation and the durability
and sizes of documentation may vary depending on the intended use and the repository.
Accuracy of documentation should be controlled by assessing the reliability
of all sourcesand making that assessment available in the archival record; by
describing the limitations of the information available from research and physical
examination of the property, and by retaining the primary data (field measurements
and notebooks) from which the archival record was produced. Usefulness of the
documentation products depends on preparing the documentation on durable materials
that are able to withstand handling and reproduction, and in sizes that can
be stored and reproduced without damage.
Guidelines for Recording
Historic Ships. By Richard K. Anderson, Jr., HABS/HAER, National Park Service,
Washington, D.C.
Marks the revival of the Historic American Merchant Marine Survey of the 1930s
as part of the HAER program, and provides the definitive guide to maritime recording.
HABS/HAER Photography:
Specifications and Guidelines. HABS/HAER, National Park Service, Washington,
D.C., Draft 1997.
Provides criteria for the production of large format photographs for acceptance
to the HABS/HAER Collections.
HABS Historical Reports.
HABS/HAER, National Park Service, Washington, D.C., 1993.
Provides guidelines for producing written data on historic buildings to HABS
standards.
HABS/HAER Production Notes
Recording
Historic Sites and Structures Using Computer-aided Drafting (CAD) (.PDF
File). HABS/HAER, National Park Service, Washington, D.C., 2000.
Addresses the application of the Secretary of the Interior's Standards and
Guidelines for Architectural and Engineering Documentation to the use of
computer-aided drafting (CAD) software in the production of two-dimensional
HABS/HAER measured drawings.
Recording Historic
Structures. John A. Burns, editor, AIA. The AIA Press, Washington, D.C.,
1989.
The definitive guide to recording America's built environment. Since issued
in 1989, this publication is in its third printing.
Recording
Historic Structures and Sites for the Historic American Engineering Record
(.PDF Files). HABS/HAER, National Park Service, Washington, D.C.,
1996.
Provides guidelines for documenting historic engineering and industrial
sites and structures to HAER standards using measured drawings and written
data.
Recording
Structures and Sites with HABS Measured Drawings. HABS/HAER, National
Park Service, Washington, D.C., 1993.
Provides procedures for producing measured drawings of historic buildings
to HABS standards.
Transmitting HABS/HAER
Documentation. HABS/HAER, National Park Service, Washington, D.C., 1999.
Provides transmittal procedures and archival requirements of documentation
for acceptance to the HABS/HAER Collections.
Recording Historic
Buildings. Harley J. McKee. Government Printing Office, 1970. Washington,
D.C. Available through the Superintendent of Documents, U.S. Government
Printing Office, Washington, D.C. 20402. GPO number 024-005-0235-9.
HABS/HAER Procedures
Manual. Historic American Buildings Survey/Historic American Engineering
Record, National Park Service, 1980. Washington, D.C.
Photogrammetric
Recording of Cultural Resources. Terry E. Borchers. Technical Preservation
Services, U.S. Department of the Interior, 1977. Washington, D.C.
Rectified Photography
and Photo Drawings for Historic Preservation. J. Henry Chambers. Technical
Preservation Services, U.S. Department of the Interior, 1975. Washington, D.C.
Historic
American Buildings Survey/Historic American Engineering Record (HABS/HAER)
HABS/HAER
Mitigation Documentation
Secretary of the Interior's Standards for Archeological Documentation
Archeological documentation is a series of actions applied to properties of archeological interest. Documentation of such properties may occur at any or all levels of planning, identification, evaluation or treatment. The nature and level of documentation is dictated by each specific set of circumstances. Archeological documentation consists of activities such as archival research, observation and recording of above-ground remains, and observation (directly, through excavation, or indirectly, through remote sensing) of below-ground remains. Archeological documentation is employed for the purpose of gathering information on individual historic properties or groups of properties. It is guided by a framework of objectives and methods derived from the planning process, and makes use of previous planning decisions, such as those on evaluation of significance. Archeological documentation may be undertaken as an aid to various treatment activities, including research, interpretation, reconstruction, stabilization and data recovery when mitigating archeological losses resulting from construction. Care should be taken to assure that documentation efforts do not duplicate previous efforts.
Standard I. Archeological Documentation Activities Follow an Explicit Statement of Objectives and Methods That Responds to Needs Identified in the Planning Process
Archeological research and documentation may be undertaken to fulfill a number of needs, such as overviews and background studies for planning interpretation or data recovery to mitigate adverse effects. The planning needs are articulated in a statement of objectives to be accomplished by the archeological documentation activities. The statement of objectives guides the selection of methods and techniques of study and provides a comparative framework for evaluating and deciding the relative efficiency of alternatives. Satisfactory documentation involves the use of archeological and historical sources, as well as those of other disciplines. The statement of objectives usually takes the form of a formal and explicit research design which has evolved from the interrelation of planning needs, current knowledge, resource value and logistics.
Standard II. The Methods and Techniques of Archeological Documentation are Selected To Obtain the Information Required by the Statement of Objectives
The methods and techniques chosen for archeological documentation should be the most effective, least destructive, most efficient and economical means of obtaining the needed information. Methods and techniques should be selected so that the results may be verified if necessary. Non-destructive techniques should be used whenever appropriate. The focus on stated objectives should be maintained throughout the process of study and documentation.
Standard III. The Results of Archeological Documentation are Assessed Against the Statement of Objectives and Integrated into the Planning Process
One product of archeological documentation is the recovered data; another is the information gathered about the usefulness of the statement of objectives itself. The recovered data are assessed against the objectives to determine how they meet the specified planning needs. Information related to archeological site types, distribution and density should be integrated in planning at the level of identification and evaluation. Information and data concerning intra-site structure may be needed for developing mitigation strategies and are appropriately integrated at this level of planning. The results of the data analyses are integrated into the body of current knowledge. The utility of the method of approach and the particular techniques which were used in the investigation (i.e., the research design) should be assessed so that the objectives of future documentation efforts may be modified accordingly.
Standard IV. The Results of Archeological Documentation are Reported and Made Available to the Public
Results must be accessible
to a broad range of users including appropriate agencies, the professional community
and the general public. Results should be communicated in reports that summarize
the objectives, methods, techniques and results of the documentation activity,
and identify the repository of the materials and information so that additional
detailed information can be obtained, if necessary. The public may also benefit
from the knowledge obtained from archeological documentation through pamphlets,
brochures, leaflets, displays and exhibits, or by slide, film or multimedia
productions. The goal of disseminating information must be balanced, however,
with the need to protect sensitive information whose disclosure might result
in damage to properties. Curation arrangements sufficient to preserve artifacts,
specimens and records generated by the investigation must be provided for to
assure the availability of these materials for future use.
Introduction
These Guidelines link the Standards for Archeological Documentation with more specific guidance and technical information. They describe one approach to meeting the Standards for Documentation. Agencies, organizations or individuals proposing to approach archeological documentation differently may wish to review their approach with the National Park Service.
The Guidelines are
organized as follows:
Archeological Documentation Objectives
Documentation Plan
Methods
Reporting Results
Curation
Recommended Sources of Technical Information
1. Collection of base-line data;
2. Problem-oriented research directed toward particular data gaps recognized in the historic context(s);
3. Preservation or illustration of significance which has been identified for treatment by the planning process; or
4. Testing of new investigative or conservation techniques, such as the effect of different actions such as forms of site burial (aqueous or nonaqueous).
Many properties having archeological components have associative values as well as research values. Examples include Native American sacred areas and historic sites such as battlefields. Archeological documentation may preserve information or data that are linked to the identified values that a particular property possesses. Depending on the property type and the range of values represented by the property, it may be necessary to recover information that relates to an aspect of the property's significance other than the specified research questions. It is possible that conflicts may arise between the optimal realizations of research goals and other issues such as the recognition/protection of other types of associative values. The research design for the archeological documentation should provide for methods and procedures to resolve such conflicts, and for the close coordination of the archeological research with the appropriate ethnographic, social or technological research.
Archeological Documentation Objectives
The term "archeological documentation" is used here to refer specifically to any operation that is performed using archeological techniques as a means to obtain and record evidence about past human activity that is of importance to documenting history and prehistory in the United States. Historic and prehistoric properties may be important for the data they contain, or because of their association with important persons, events, or processes, or because they represent architectural or artistic values, or for other reasons. Archeological documentation may be an appropriate option for application not only to archeological properties, but to aboveground structures as well, and may be used in collaboration with a wide range of other treatment activities.
If a property contains artifacts, features, and other materials that can be studied using archeological techniques, then archeological documentation may be selected to achieve particular goals of the planning process, such as to address a specified information need, or to illustrate significant associative values. Within the overall goals and priorities established by the planning process, particular methods of investigation are chosen that best suit the types of study to be performed.
Relationship of archeological documentation to other types of documentation or other treatments: Archeological documentation is appropriate for achieving any of various goals, including:
Research Design: Archeological documentation can be carried out only after defining explicit goals and a methodology for reaching them. The goals of the documentation effort directly reflect the goals of the preservation plan and the specific needs identified for the relevant historic contexts. In the case of problem oriented archeological research, the plan usually takes the form of a formal research design, and includes, in addition to the items below, explicit statements of the problem to be addressed and the methods or tests to be applied. The purpose of the statement of objectives is to explain the rationale behind the documentation effort; to define the scope of the investigation; to identify the methods, techniques, and procedures to be used; to provide a schedule for the activities; and to permit comparison of the proposed research with the results. The research design for an archeological documentation effort follows the same guidelines as those for identification (see the Guidelines for Identification) but has a more property-specific orientation.
The research design should draw upon the preservation plan to identify:
The primary focus of archeological documentation is on the data classes that are required to address the specified documentation objectives. This may mean that other data classes are deliberately neglected. If so, the reasons for such a decision should be carefully justified in terms of the preservation plan.
Archeological investigations seldom are able to collect and record all possible data. It is essential to determine the point at which further data recovery and documentation fail to improve the usefulness of the archeological information being recovered. One purpose of the research design is to estimate those limits in advance and to suggest at what point information becomes duplicative. Investigation strategies should be selected based on these general principles, considering the following factors:
Responsiveness to the concerns of local groups (e.g., Native American groups with ties to specific properties) that was built into survey and evaluation phases of the preservation plan, should be maintained in archeological investigation, since such activity usually involve, site disturbance. The research design, in addition to providing for appropriate ethnographic research and consultation, should consider concerns voiced in previous phases. In the absence of previous efforts to coordinate with local or other interested groups, the research design should anticipate the need to initiate appropriate contracts and provide a mechanism for responding to sensitive issues, such as the possible uncovering of human remains or discovery of sacred areas.
The research design facilitates an orderly, goal directed and economical project. However, the research design must be flexible enough to allow for examination of unanticipated but important research opportunities that arise during the investigation.
Backgound Review: Archeological documentation usually is preceded by, or integrated with historical research (i.e. that intensive background information gathering including identification of previous archeological work and inspection of museum collections; gathering relevant data on geology, botany, urban geography and other related disciplines; archival research; informant interviews, or recording of oral tradition, etc.).
Depending on the goals of the archeological documentation, the background historical and archeological research may exceed the level of research accomplished for development of the relevant historic contexts or for identification and evaluation, and focuses on the unique aspects of the property to be treated. This assists in directing the investigation and locates a broader base of information than that contained in the property itself for response to the documentation goals. This activity is particularly important for historic archeological properties where information sources other than the property itself may be critical to preserving the significant aspects of the property. (See the Secretary of the Interior's Standards and Guidelines for Historical Documentation for discussion of associated research activities.)
Field Studies: The implementation of the research design in the field must be flexible enough to accommodate the discovery of new or unexpected data classes or properties, or changing field conditions. A phased approach may be appropriated when dealing with large complex properties or groups of properties, allowing for changes in emphasis or field strategy, or termination of the program, based on analysis of recovered data at the end of each phase. Such an approach permits the confirmation of assumptions concerning property extent, content or organization which had been made based on data gathered from identification and evaluation efforts, or the adjustment of those expectations and resulting changes in procedure. In some cases a phased approach may be necessary to gather sufficient data to calculate the necessary sample size for a statistically valid sample. A phased documentation program may often be most cost-effective, in allowing for early termination of work if the desired objectives cannot be achieved.
Explicit descriptive statements of and justification for field study techniques are important to provide a means of evaluating results. In some cases, especially those employing a sampling strategy in earlier phases (such as identification or evaluation), it is possible to estimate parameters of certain classes of data in a fairly rigorous statistical manner. It is thus desirable to maintain some consistency in choice of sampling designs throughout multiple phases of work at the same property. Consistency with previously employed area sampling frameworks also improves potential replication in terms of later locating sampled and unsampled areas. It often is desirable to estimate the nature and frequency of data parameters based on existing information or analogy to other similar cases. These estimates may then be tested in field studies.
An important consideration in choosing methods to be used in the field studies should be assuring full, clear, and accurate descriptions of all field operations and observations, including excavation and recording techniques and stratigraphic or inter-site relationships.
To the extent feasible, chosen methodologies and techniques should take into account the possibility that future researchers will need to use the recovered data to address problems not recognized at the time the data were recovered. The field operation may recover data that may not be fully analyzed; this data, as well as the data analyzed, should be recorded and preserved in a way to facilitate future research.
A variety of methodologies may be used. Choices must be explained, including a measure of cost-effectiveness relative to other potential choices. Actual results can then be measured against expectations, and the information applied later in similar cases.
Destructive methods should not be applied to portions or elements of the property if nondestructive methods are practical. If portions or elements of the property being documented are to be preserved in place, the archeological investigation should employ methods that will leave the property as undisturbed as possible. However, in cases where the property will be destroyed by, for example, construction following the investigation, it may be most practical to gather the needed data in the most direct manner, even though that may involve use of destructive techniques.
Logistics in the field, including the deployment of personnel and materials and the execution of sampling strategies, should consider site significant, anticipated location of most important data, cost effectiveness, potential time limitations and possible adverse environmental conditions.
The choice of methods for recording data gathered in the field should be based on the research design. Based on that statement, it is known in advance of field work what kinds of information are needed for analysis; record-keeping techniques should focus on these data. Field records should be maintained in a manner that permits independent interpretation in so far as possible. Record-keeping should be standardized in format and level of detail.
Archeological documentation should be conducted under the supervision of qualified professionals in the disciplines appropriate to the data that are to be recovered. When the general public is directly involved in archeological documentation activities, provision should be made for training and supervision by qualified professionals. (See the Professional Qualifications Standards.)
Analysis: Archeological documentation is not completed with field work; analysis of the collected information is an integral part of the documentation activity, and should be planned for in the research design. Analytical techniques should be selected that are relevant to the objectives of the investigation. Forms of analysis that may be appropriate, depending on the type of data recovered and the objectives of the investigation, include but are not limited to: studying artifact types and distribution; radiometric and other means of age determination; studies of soil stratigraphy, studies of organic matter such as human remains, pollen, animal bones, shells and seeds; study of the composition of soils and study of the natural environment in which the property appears.
Report Contents: Archeological documentation concludes with written report(s) including minimally the following topics:
Some individual property information, such as specific locational data, may be highly sensitive to disclosure, because of the threat of vandalism. If the objectives of the documentation effort are such that a report containing confidential information such as specific site locations or information on religious practices is necessary, it may be appropriate to prepare a separate report for public distribution. The additional report should summarize that information that is not under restricted access in a format most useful to the expected groups of potential users. Peer review of draft reports is recommended to ensure that state-of-the-art technical reports are produced.
Availability: Results must be made available to the full range of potential users. This can be accomplished through a variety of means including publication of results in monographs and professional journals and distribution of the report to libraries or technical clearinghouses such as the National Technical Information Service in Springfield, Virginia.
Archeological specimens and records are part of the documentary record of an archeological site. They must be curated for future use in research, interpretation, preservation, and resource management activities. Curation of important archeological specimens and records should be provided for in the development of any archeological program or project.
Archeological specimens and records that should be curated are those that embody the information important to history and prehistory. They include artifacts and their associated documents, photographs, maps, and field notes; materials of an environmental nature such as bones, shells, soil and sediment samples, wood, seeds, pollen, and their associated records; and the products and associated records of laboratory procedures such as thin sections, and sediment fractions that result from the analysis of archeological data.
Satisfactory curation occurs when:
Archaeology, 3rd edition. David Hurst Thomas. Harcourt Brace College Publishers, Forth Worth, 1998.
Archaeology: Theories, Methods, and Practice, 2nd edition. Colin Renfrew and Paul Bahn. Thames and Hudson, London, 1996.
Archeology in the National Historic Landmarks Program. Robert S. Grumet. Technical Brief 3, Archeology & Ethnography Program, National Park Service, 1988.
Archaeological Prospecting and Remote Sensing. I. Scollar, A. Tabbagh, A. Hesse, and I. Herzog. Cambridge University Press, Cambridge, 1990.
Curation of Federally-Owned and Administered Archeological Collections (36 CFR Part 79)
Field Methods in Archaeology, 7th edition. Thomas R. Hester, Harry J. Shafer, and Kenneth L. Feder. Mayfield Publishing Company, Mountain View, CA, 1997.
Historical Archaeology. Charles E. Orser, Jr. and Brian M. Fagan. HarperCollins College Publishers, New York, 1995.
How to Complete the National Register Registration Form. Department of the Interior, National Park Service, National Register, History and Education, 1977, revised 1986, 1991, 1997, 1999.
Managing Archeological Resources from the Museum Perspective. Lynn P. Sullivan. Technical Brief 13, Archeology & Ethnography Program, National Park Service, April 1992.
The National Historic Landmarks Program Theme Study and Preservation Planning. Robert S. Grumet. Technical Brief 10, Archeology & Ethnography Program, National Park Service, 1990, revised 1992.
The Peer Review of Public Archeology Projects: A Procedure Developed by the Departmental Consulting Archeologist. Bennie C. Keel. Technical Brief 14, Archeology & Ethnography Program, National Park Service, 1993.
Principles of Archaeological Stratigraphy. E.C. Harris. 2nd ed. Academic Press Inc, San Diego, 1989.
Recommended
Approach for Consultation on Recovery of Significant Information from Archeological
Sites.
Notice of Guidance from the Advisory Council on Historic Preservation.
"Sampling in Archaeological Surveys: A Critique." S. Plog. American Antiquity 38(1):280-285, 1978.
"A Selection of Samplers: Comments on Archaeo-Statistics." G. L. Cowgill. In Sampling in Archaeology. J. W. Mueller, editor. Pp. 170-191. University of Arizona Press, Tucson, 1975.
"The Siteless Survey: A Regional Scale Data Collection Strategy." R. Dunnell and W. Dancey. In Advances in Archaeological Method and Theory, Vol. 5. M. B. Schiffer, editor. Pp. 267-287. Academic Press, New York, 1983.
Strategies
for Protecting Archeological Sites on Private Lands. Susan L. Henry
Renaud.
A web guide to the wide variety of tools available for protecting archeological
sites on private lands. It contains information on strategies that are currently
being used throughout the country, contact information, and other sources of useful
information.
"Surface Collection, Sampling, and Research Design: A Retrospective." C. L. Redman. American Antiquity 52(2):249-265, 1987.
Archeomagnetism:
A Handbook for the Archeologist. Jeffrey L. Eighmy, U.S. Department of
the Interior, Washington, D.C., 1980.
The Curation and
Management of Archeological Collections: A Pilot Study. Cultural Resource
Management Series, U.S. Department of the Interior, September 1980.
Human Bones and Archeology.
Douglas H. Ubelaker. Interagency Archeological Services, Heritage Conservation
and Recreation Service, U.S. Department of the Interior, Washington, D.C., 1980.
Available from the Superintendent of Documents, U.S. Government Printing Office,
Washington, D.C. 20402
Manual for Museums.
Ralph H. Lewis, National Park Service, U.S. Department of the Interior, 1976.
Treatment of Archeological
Properties: A Handbook. Advisory Council on Historic Preservation, Washington,
D.C., 1980.
Archeology & Ethnography Program
National
Register of Historic Places
Society for Historical Archaeology
Society
of American Archaeology
Secretary
of the Interior's Standards for Historic Preservation Projects*
*[This document has been replaced by The Secretary of the Interior's Standards for the Treatment of Historic Properties, 1995]
General
Standards for Historic Preservation Projects
The following general
standards apply to all treatments undertaken on historic properties listed in
the National Register.
1. Every reasonable effort
shall be made to provide a compatible use for a property that requires minimal
alteration of the building, structure, or site and its environment, or to use
a property for its originally intended purpose.
2. The distinguishing
original qualities or character of a building, structure, or site and its environment
shall not be destroyed. The removal or alteration of any historic material or
distinctive architectural features should be avoided when possible.
3. All buildings, structures,
and sites shall be recognized as products of their own time. Alterations which
have no historical basis and which seek to create an earlier appearance shall
be discouraged.
4. Changes which have
taken place in the course of time are evidence of the history and development
of a building, structure, or site and its environment. These changes may have
acquired significance in their own right, and this significance shall be recognized
and respected.
5. Distinctive architectural
features or examples of skilled craftsmanship which characterize a building,
structure, or site shall be treated with sensitivity.
6. Deteriorated architectural
features shall be repaired rather than replaced, wherever possible. In the event
replacement is necessary, the new material should match the material being replaced
in composition, design, color, texture, and other visual qualities. Repair or
replacement of missing architectural features should be based on accurate duplications
of features, substantiated by historic, physical, or pictoral evidence rather
than on conjectural designs or the availability of different architectural elements
from other buildings or structures.
7. The surface cleaning
of structures shall be undertaken with the gentlest means possible. Sandblasting
and other cleaning methods that will damage the historic building materials
shall not be undertaken.
8. Every reasonable effort
shall be made to protect and preserve archeological resources affected by, or
adjacent to, any acquisition, stabilization, preservation, rehabilitation, restoration,
or reconstruction project.
Specific
Standards for Historic Preservation Projects
The following specific
standards for each treatment are to be used in conjunction with the eight general
standards and, in each case, begin with number 9. For example, in evaluating
acquisition projects, include the eight general standards plus the four specific
standards listed under Standards for Acquisition. The specific standards differ
from those published for use in Historic Preservation Fund grant-in-aid projects
(36 CFR Part 68) in that they discuss more fully the treatment of archeological
properties.
Standards for
Acquisition
9. Careful consideration shall be given to the type and extent of property
rights which are required to assure the preservation of the historic resource.
The preservation objectives shall determine the exact property rights to be
acquired.
10. Properties shall
be acquired in fee simple when absolute ownership is required to insure their
preservation.
11. The purchase of less-than-fee
simple interests, such as open space or facade easements, shall be undertaken
when a limited interest achieves the preservation objective.
12. Every reasonable
effort shall be made to acquire sufficient property with the historic resource
to protect its historical, archeological, architectural or cultural significance.
Standards for
Protection
9. Before applying protective measures which are generally of a temporary nature
and imply future historic preservation work, an analysis of the actual or anticipated
threats to the property shall be made.
10. Protection shall
safeguard the physical condition or environment of a property or archeological
site from further deterioration or damage caused by weather or other natural,
animal or human intrusions.
11. If any historic material
or architectural features are removed, they shall be properly recorded and,
if possible, stored for future study or reuse.
Standards for
Stabilization
9. Stabilization shall reestablish the structural stability of a property through
the reinforcement of loadbearing members or by arresting deterioration leading
to structural failure. Stabilization shall also reestablish weather resistant
conditions for a property.
10. Stabilization shall
be accomplished in such a manner that it detracts as little as possible from
the property's appearance and significance. When reinforcement is required to
reestablish structural stability, such work shall be concealed wherever possible
so as not to intrude upon or detract from the aesthetic and historical or archeological
quality of the property, except where concealment would result in the alteration
or destruction of historically or archaeologically significant material or spaces.
Accurate documentation of stabilization procedures shall be kept and made available
for future needs.
11. Stabilization work
that will result in ground disturbance shall be preceded by sufficient archeological
investigation to determine whether significant subsurface features or artifacts
will be affected. Recovery, curation and documentation of archeological features
and specimens shall be undertaken in accordance with appropriate professional
methods and techniques.
Standards for
Preservation
9. Preservation shall maintain the existing form, integrity, and materials
of a building, structure, or site. Archeological sites shall be preserved undisturbed
whenever feasible and practical Substantial reconstruction or restoration of
lost features generally are not included in a preservation undertaking.
10. Preservation shall
include techniques of arresting or retarding the deterioration of a property
through a program of ongoing maintenance.
11. Use of destructive
techniques, such as archeological excavation, shall be limited to providing
sufficient information for research, interpretation and management needs.
Standards for
Rehabilitation
9. Contemporary design for alterations and additions to existing properties
shall not be discouraged when such alterations and additions do not destroy
significant historic, architectural or cultural material and such design is
compatible with the size, scale, color, material and character of the property,
neighborhood, or environment.
10. Wherever possible,
new additions or alterations to structures shall be done in such a manner that
if such additions or alterations were to be removed in the future, the essential
form and integrity of the structure would be unimpaired.
Standards for
Restoration
9. Every reasonable effort shall be made to use a property for its
originally intended purpose or to provide a compatible use that will require
minimum alteration to the property and its environment.
10. Reinforcement required
for structural stability or the installation of protective or code required
mechanical systems shall be concealed wherever possible so as not to intrude
or detract from the property's aesthetic and historical qualities, except where
concealment would result in the alteration or destruction of historically significant
materials or spaces.
11. Restoration work
such as the demolition of non-contributing additions that will result in ground
or structural disturbance shall be preceded by sufficient archeological investigation
to determine whether significant subsurface or structural features or artifacts
will be affected. Recovery, curation and documentation of archeological features
and specimens shall be undertaken in accordance with appropriate professional
methods and techniques.
Standards for
Reconstruction
9. Reconstruction of a part or all of a property shall be undertaken
only when such work is essential to reproduce a significant missing feature
in a historic district or scene, and when a contemporary design solution is
not acceptable. Reconstruction of archeological sites generally is not appropriate.
10. Reconstruction of
all or a part of a historic property shall be appropriate when the reconstruction
is essential for understanding and interpreting the value of a historic district,
or when no other building, structure, object, or landscape feature with the
same associative value has survived and sufficient historical or archeological
documentation exists to insure an accurate reproduction of the original.
11. The reproduction
of missing elements accomplished with new materials shall duplicate the composition,
design, color, texture, and other visual qualities of the missing element. Reconstruction
of missing architectural or archeological features shall be based upon accurate
duplication of original features substantiated by physical or documentary evidence
rather than upon conjectural designs or the availability of different architectural
features from other buildings.
12. Reconstruction of
a building or structure on an original site shall be preceded by a thorough
archeological investigation to locate and identify all subsurface features and
artifacts. Recovery, curation and documentation of archeological features and
specimens shall be undertaken in accordance with professional methods and techniques.
13. Reconstruction shall
include measures to preserve any remaining original fabric, including foundations,
subsurface, and ancillary elements. The reconstruction of missing elements and
features shall be done in such a manner that the essential form and integrity
of the original surviving features are unimpaired.
Secretary
of the Interior Guidelines for Historic Preservation Projects
The guidelines for the Secretary of the Interior's Standards for Historic
Preservation Projects, not included here because of their length, may be obtained
separately from the National Park Service.
The Secretary of the Interior's Standards for the Treatment of Historic Properties, 1995
Standards for Preservation
1. A property will be used as it was historically, or be given a new use that maximizes the retention of distinctive materials, features, spaces, and spatial relationships. Where a treatment and use have not been identified, a property will be protected and, if necessary, stabilized until additional work may be undertaken.
2. The historic character of a property will be retained and preserved. The replacement of intact or repairable historic materials or alteration of features, spaces, and spatial relationships that characterize a property will be avoided.
3. Each property will be recognized as a physical record of its time, place, and use. Work needed to stabilize, consolidate, and conserve existing historic materials and features will be physically and visually compatible, identifiable upon close inspection, and properly documented for future research.
4. Changes to a property that have acquired historic significance in their own right will be retained and preserved.
5. Distinctive materials, features, finishes, and construction techniques or examples of craftsmanship that characterize a property will be preserved.
6. The existing condition of historic features will be evaluated to determine the appropriate level of intervention needed. Where the severity of deterioration requires repair or limited replacement of a distinctive feature, the new material will match the old in composition, design, color, and texture.
7. Chemical or physical treatments, if appropriate, will be undertaken using the gentlest means possible. Treatments that cause damage to historic materials will not be used.
8. Archeological resources will be protected and preserved in place. If such resources must be disturbed, mitigation measures will be undertaken.
Standards for Rehabilitation
1. A property will be used as it was historically or be given a new use that requires minimal change to its distinctive materials, features, spaces, and spatial relationships.
2. The historic character of a property will be retained and preserved. The removal of distinctive materials or alteration of features, spaces, and spatial relationships that characterize a property will be avoided.
3. Each property will be recognized as a physical record of its time, place, and use. Changes that create a false sense of historical development, such as adding conjectural features or elements from other historic properties, will not be undertaken.
4. Changes to a property that have acquired historic significance in their own right will be retained and preserved.
5. Distinctive materials, features, finishes, and construction techniques or examples of craftsmanship that characterize a property will be preserved.
6. Deteriorated historic features will be repaired rather than replaced. Where the severity of deterioration requires replacement of a distinctive feature, the new feature will match the old in design, color, texture, and, where possible, materials. Replacement of missing features will be substantiated by documentary and physical evidence.
7. Chemical or physical treatments, if appropriate, will be undertaken using the gentlest means possible. Treatments that cause damage to historic materials will not be used.
8. Archeological resources will be protected and preserved in place. If such resources must be disturbed, mitigation measures will be undertaken.
9. New additions, exterior alterations, or related new construction will not destroy historic materials, features, and spatial relationships that characterize the property. The new work will be differentiated from the old and will be compatible with the historic materials, features, size, scale and proportion, and massing to protect the integrity of the property and its environment.
10. New additions and adjacent or related new construction will be undertaken in such a manner that, if removed in the future, the essential form and integrity of the historic property and its environment would be unimpaired.
Standards for Restoration
1. A property will be used as it was historically or be given a new use which reflects the property's restoration period.
2. Materials and features from the restoration period will be retained and preserved. The removal of materials or alteration of features, spaces, and spatial relationships that characterize the period will not be undertaken.
3. Each property will be recognized as a physical record of its time, place, and use. Work needed to stabilize, consolidate and conserve materials and features from the restoration period will be physically and visually compatible, identifiable upon close inspection, and properly documented for future research.
4. Materials, features, spaces, and finishes that characterize other historical periods will be documented prior to their alteration or removal.
5. Distinctive materials, features, finishes, and construction techniques or examples of craftsmanship that characterize the restoration period will be preserved.
6. Deteriorated features from the restoration period will be repaired rather than replaced. Where the severity of deterioration requires replacement of a distinctive feature, the new feature will match the old in design, color, texture, and, where possible, materials.
7. Replacement of missing features from the restoration period will be substantiated by documentary and physical evidence. A false sense of history will not be created by adding conjectural features, features from other properties, or by combining features that never existed together historically.
8. Chemical or physical treatments, if appropriate, will be undertaken using the gentlest means possible. Treatments that cause damage to historic materials will not be used.
9. Archeological resources affected by a project will be protected and preserved in place. If such resources must be disturbed, mitigation measures will be undertaken.
10. Designs that were never executed historically will not be constructed.
Standards for Reconstruction
1. Reconstruction will be used to depict vanished or non-surviving portions of a property when documentary and physical evidence is available to permit accurate reconstruction with minimal conjecture, and such reconstruction is essential to the public understanding of the property.
2. Reconstruction of a landscape, building, structure, or object in its historic location will be preceded by a thorough archeological investigation to identify and evaluate those features and artifacts which are essential to an accurate reconstruction. If such resources must be disturbed, mitigation measures will be undertaken.
3. Reconstruction will include measures to preserve any remaining historic materials, features, and spatial relationships.
4. Reconstruction will be based on the accurate duplication of historic features and elements substantiated by documentary or physical evidence rather than on conjectural designs or the availability of different features from other historic properties. A reconstructed property will re-create the appearance of the non-surviving historic property in materials, design, color, and texture.
5. A reconstruction will be clearly identified as a contemporary re-creation.
6. Designs that were never executed historically will not be constructed.
Understanding Your Work on a Historic Building
Four
Approaches to Treatment--What They Are
Designed to assist historic property owners, managers, and maintenance personnel,
the essay explains the philosophy behind the various work approaches on historic
buildings in The Secretary of the Interior's Standards for the Treatment of
Historic Properties. Easy-to-read charts tell the differences between the four
treatments.
Telling
Historic Preservation Time
This web guidance demonstrates that TIME constitutes the philosophical framework
for the four approaches to working on historic buildings--Preservation, Rehabilitation,
Restoration and Reconstruction. Uses the idea of four clocks to make key points.
Using the Standards and Guidelines
The
Secretary of the Interior's Standards for Rehabilitation with Illustrated Guidelines
for Rehabilitating Historic Buildings
The Standards (36 CFR 67) and accompanying illustrated guidelines help property
owners, developers, and federal managers apply the Secretary of the Interior's
Standards for Rehabilitation during the project planning stage by providing
general design and technical recommendations. These are the standards that must
be used by federal historic preservation tax credit applicants.
The Secretary of the Interior's Standards for the Treatment of Historic Properties
with Guidelines for Preserving, Rehabilitating, Restoring and Reconstructing
Historic Buildings
The Standards (37 CFR 68) and guidelines provide a consistent framework for
undertaking any one of four approaches to work, Preservation, Rehabilitation,
Restoration, and Reconstruction. They pertain to both exterior and interior
work on historic buildings of all sizes, materials, and types. (PDF format)
Planning Your Work on a Historic Building
A
Checklist for Rehabilitating Historic Buildings
The rehab checklist suggests a typical process of documenting, evaluating, and
assessing a historic building prior to undertaking rehabilitation work.
All
Wet & How to Prevent It - Managing Moisture in Your Historic House
This mini-web class can help anyone who cares for, or about, a historic house
to better understand how moisture can invade historic materials and what goes
wrong when moisture is not adequately managed. It provides a series of simple,
common sense tips to combat the problems and a quiz that's fun to take.
The BOILERPLATE "YESs!"
This web guidance focuses on approaches to rehabilitation work that serve to
protect historic materials, exterior features, and interior spaces, features,
and finishes in the process of making changes for new or continued use.
The
BOILERPLATE "NOs!"
This web guidance illustrates what happens when inappropriate approaches to
rehabilitation work cause the loss of a historic building's unique character.
Includes examples of incompatible new additions--large and small.
Electronic
REHAB
This popular web class is useful for historic building owners, historic preservation
commissions; architects, contractors, and developers; maintenance personnel;
and others involved in the care of historic buildings. Two quizzes are included.
The
Walk Through--How to Read a Historic Building
This web class helps anyone identify those tangible elements or features that
give historic buildings their unique visual character. Includes a challenging
quiz.
Beginning Your Work on a Historic Building
Preservation
Briefs 1 - 41
The Briefs are developed to assist owners and developers of historic buildings
in recognizing and resolving common preservation and repair problems prior to
work.
Preservation
Tech Notes
Preservation Tech Notes (PTN) provide innovative solutions to specific problems
in preserving cultural resources for architects, contractors, and maintenance
personnel, as well as for anyone seeking the tax credit for rehabilitation.
Technical Preservation Services for Historic Buildings
Professional Qualifications Standards
The following requirements are those used by the National Park Service, and have been previously published in the Code of Federal Regulations, 36 CFR Part 61. The qualifications define minimum education and experience required to perform identification, evaluation, registration, and treatment activities. In some cases, additional areas or levels of expertise may be needed, depending on the complexity of the task and the nature of the historic properties involved. In the following definitions, a year of full-time professional experience need not consist of a continuous year of full-time work but may be made up of discontinuous periods of full-time or part-time work adding up to the equivalent of a year of full-time experience.
History
The minimum professional qualifications in history are a graduate degree in
history or closely related field; or a bachelor's degree in history or closely
related field plus one of the following:
Archeology
The minimum professional qualifications in archeology are a graduate
degree in archeology, anthropology, or closely related field plus:
In addition to these minimum qualifications, a professional in prehistoric archeology shall have at least one year of full-time professional experience at a supervisory level in the study of archeological resources of the prehistoric period. A professional in historic archeology shall have at least one year of full-time professional experience at a supervisory level in the study of archeological resources of the historic period.
Architectural History
The minimum professional qualifications in architectural history are a graduate
degree in architectural history, art history, historic preservation, or closely
related field, with coursework in American architectural history, or a bachelor's
degree in architectural history, art history, historic preservation or closely
related field plus one of the following:
Architecture
The minimum professional qualifications in architecture are a professional
degree in architecture plus at least two years of full-time experience in architecture;
or a State license to practice architecture.
Historic Architecture
The minimum professional qualifications in historic architecture are a professional
degree in architecture or a State license to practice architecture, plus one
of the following:
Such graduate study or experience
shall include detailed investigations of historic structures, preparation of
historic structures research reports, and preparation of plans and specifications
for preservation projects.
Preservation Terminology
Acquisition-the act or process of acquiring fee title or interest other than fee title of real property (including acquisition of development rights or remainder interest).
Comprehensive Historic Preservation Planning-the organization into a logical sequence of preservation information pertaining to identification, evaluation, registration and treatment of historic properties, and setting priorities for accomplishing preservation activities.
Historic Context-a unit created for planning purposes that groups information about historic properties based on a shared theme, specific time period and geographical area.
Historic Property-a district, site, building, structure or object significant in American history, architecture, engineering, archeology or culture at the national, State, or local level.
Integrity-the authenticity of a property's historic identity, evidenced by the survival of physical characteristics that existed during the property's historic or prehistoric period.
Intensive Survey-a systematic, detailed examination of an area designed to gather information about historic properties sufficient to evaluate them against predetermined criteria of significance within specific historic contexts.
Inventory-a list of historic properties determined to meet specified criteria of significance.
National Register Criteria-the established criteria for evaluating the eligibility of properties for inclusion in the National Register of Historic Places.
Preservation (treatment)-the
act or process of applying measures to sustain the existing form, integrity
and material of a building or structure, and the existing form and vegetative
cover of a site. It may include initial stabilization work, where necessary,
as well as ongoing maintenance of the historic building materials.
[Current definition of this
treatment standard, as revised in The Secretary of the Interior's Standards
for the Treatment of Historic Properties, 1995:
Property Type-a grouping of individual properties based on a set of shared physical or associative characteristics.
Protection (treatment)-the
act or process of applying measures designed to affect the physical condition
of a property by defending or guarding it from deterioration, loss or attack,
or to cover or shield the property from danger or injury. In the case of buildings
and structures, such treatment is generally of a temporary nature and anticipates
future historic preservation treatment; in the case of archeological sites,
the protective measure may be temporary or permanent. [This
treatment standard and definition was deleted in The Secretary of the Interior's
Standards for the Treatment of Historic Properties, 1995.]
Reconnaissance Survey-an examination of all or part of an area accomplished in sufficient detail to make generalizations about the types and distributions of historic properties that may be present.
Reconstruction (treatment)-the
act or process of reproducing by new construction the exact form and detail
of a vanished building, structure, or object, or any part thereof, as it appeared
at a specific period of time. [Current
definition of this treatment standard, as revised in The Secretary of the Interior's
Standards for the Treatment of Historic Properties, 1995:
Rehabilitation (treatment)-the
act or process of returning a property to a state of utility through repair
or alteration which makes possible an efficient contemporary use while preserving
those portions or features of the property which are significant to its historical,
architectural and cultural values. [Current
definition of this treatment standard, as revised in The Secretary of the Interior's
Standards for the Treatment of Historic Properties, 1995:
Research design-a statement of proposed identification, documentation, investigation, or other treatment of a historic property that identifies the project's goals, methods and techniques, expected results, and the relationship of the expected results to other proposed activities or treatments.
Restoration [treatment]-the
act or process of accurately recovering the form and details of a property and
its setting as it appeared at a particular period of time by means of the removal
of later work or by the replacement of missing earlier work. [Current definition
of this treatment standard, as revised in The Secretary of the Interior's Standards
for the Treatment of Historic Properties, 1995:
Sample Survey-survey of a representative sample of lands within a given area in order to generate or test predictions about the types and distributions of historic properties in the entire area.
Stabilization (treatment)-the
act or process of applying measures designed to reestablish a weather resistant
enclosure and the structural stability of an unsafe or deteriorated property
while maintaining the essential form as it exists at present. [This
treatment standard and its definition was deleted in The Secretary of the Interior's
Standards for the Treatment of Historic Properties, 1995.]
Statement of objectives-see Research design.
Dated: September 26, 1983
Russell E. Dickenson
Director, National Park Service
NPS |