Skip Navigation to main content U.S. Department of Energy Energy Efficiency and Renewable Energy
Bringing you a prosperous future where energy is clean, abundant, reliable, and affordable
Energy Savers
Your HomeYour VehicleYour WorkplaceProducts and ServicesRenewable EnergyInformation ResourcesHome
Your Home
Apartments Appliances and Electronics Designing and Remodeling Electricity Energy Audits Insulation and Air Sealing Landscaping Lighting and Daylighting Space Heating and Cooling Water Heating Water Heater Selection Energy-Efficient Water Heating Drain-Water Heat Recovery Hot Water Use Hot Water Pipe Insulation Storage Tank Insulation Water Temperature Heat Traps Timers Meter Reading Swimming Pool Heating Windows, Doors and Skylights
Learn More

Financing & Incentives

Find Federal Tax Credits for Energy Efficiency
ENERGY STAR®

Professional Services

Find a Contractor
Plumbing-Heating-Cooling Contractors Association

Related Links

Drainwater Heat Recovery
ToolBase Services

Calculators and Evaluation Tools
Bookmark and Share Printable Version

Drain-Water Heat Recovery

Any hot water that goes down the drain carries away energy with it. That's typically 80–90% of the energy used to heat water in a home. Drain-water (or greywater) heat recovery systems capture this energy to preheat cold water entering the water heater or going to other water fixtures.

Illustration of a drain-water heat recovery system. Water flows from a faucet down the drain, which is wrapped with a copper coil called a heat exchanger. Cold water flows through the coil and is heated by the warm water going down the drain. The heated water in the coil then flows to the plumbing fixtures and the water heater, where it then flows through the faucet and is used as drain water to heat new clean water flowing through the system.

How It Works

Drain-water heat recovery technology works well with all types of water heaters, especially with demand and solar water heaters. Also, drain-water heat exchangers can recover heat from the hot water used in showers, bathtubs, sinks, dishwashers, and clothes washers. They generally have the ability to store recovered heat for later use. You'll need a unit with storage capacity for use with a dishwasher or clothes washer. Without storage capacity, you'll only have useful energy during the simultaneous flow of cold water and heated drain water, like while showering.

Some storage-type systems have tanks containing a reservoir of clean water. Drain water flows through a spiral tube at the bottom of the heat storage tank. This warms the tank water, which rises to the top. Water heater intake water is preheated by circulation through a coil at the top of the tank.

Non-storage systems usually have a copper heat exchanger that replaces a vertical section of a main waste drain. As warm water flows down the waste drain, incoming cold water flows through a spiral copper tube wrapped tightly around the copper section of the waste drain. This preheats the incoming cold water that goes to the water heater or a fixture, such as a shower.

By preheating cold water, drain-water heat recovery systems help increase water heating capacity. This increased capacity really helps if you have an undersized water heater. You can also lower your water heating temperature without affecting the capacity.

Cost and Installation

Prices for drain-water heat recovery systems range from $300 to $500. You'll need a qualified plumbing and heating contractor to install the system. Installation will usually be less expensive in new home construction. Paybacks range from 2.5 to 7 years, depending on how often the system is used.

Related Information