|CHAPTER 1—FAR DRAFTING PRINCIPLES|
|CHAPTER 2—CLEAR WRITING|
|(e) Solicitation Provisions and Contract Clauses|
|(7) Introductory Text|
|(11) Flow Down|
|(f) Clause Matrix|
|(i) Impact on Commercial and Simplified Acquisition Provisions and Clauses|
|CHAPTER 4 — CONVENTIONS|
|(a) Avoid Overuse of Abbreviations|
|(g) Delegation of Authority|
|(h) Dollar Thresholds|
|(m) References to Statutes, Executive Orders, and Regulations|
|(n) Telephone and Facsimile Numbers|
|CHAPTER 5 — FAR TERMINOLOGY|
|Potential offeror/offeror/prospective contractor/contractor|
|Solicitation amendment/contract modification|
|EXHIBIT 1—FAR PROVISION/CLAUSE MATRIX UPDATE|
This guide provides the conventions for writing the Federal Acquisition Regulation (FAR). The guide addresses guidelines for clear writing; structure and format of text, solicitation provisions, and contract clauses; writing conventions; and terminology.
This guide addresses conventions specific to the FAR. For general guidance concerning the drafting of clear and simple regulations, refer to the following documents:
CHAPTER 1--FAR DRAFTING PRINCIPLES
(a) Draft changes to the FAR using a uniform structure and style that results in an easily understood and unambiguous regulation.
(b) Limit FAR requirements (including provisions and clauses) to the minimum necessary to—
(1) Implement statutes and Executive branch policy;
(2) Correct a critical problem or deficiency; or
(3) Otherwise add value to the overall procurement process.
(c) If the requirement has limited applicability or broad exclusions, assess whether inclusion of the requirement in the FAR is truly necessary.
CHAPTER 2--CLEAR WRITING
(a) Organize coverage. Organize coverage in a logical manner that will be most useful to your reader.
(b) Use short sentences. A sentence should express one idea clearly. Try to use simple terms to express complex and technical material. Strive to use sentences of 20 words or less. Generally, do not let any one sentence exceed 30 words unless you arrange it in a vertical list.
(c) Use short paragraphs. Limit each paragraph to a single topic. Present complex material in a series of related paragraphs.
(d) Use vertical lists to—
(1) Highlight important topics;
(2) Help the reader understand the order in which things happen;
(3) Make it easy for the reader to identify all necessary steps in a process; and
(4) Break long sentences or paragraphs into smaller segments for easy reading.
(e) Use the active voice. The active voice eliminates confusion by forcing you to name an "actor." It also makes clear to the reader who has the authority or responsibility. Generally arrange the sentence to name the actor first and then the recipient.
Don't Say: The information must be given to the contractor.
Say: The contracting officer must inform the contractor.
(f) Use words with their most common meaning, if there is no common meaning, define the term.
(g) Do not use different words to denote the same thing. Avoid using varying terminology to refer to something, e.g., avoid using "buying activity," "purchasing operation," "contracting organization," and "procuring office" for the same entity.
(h) References for Additional Writing Conventions.
Refer to the Style Manual of the Government Printing Office for format and style not addressed in this guide.
The Office of the Federal Register provides additional guidance for regulation writing in Drafting Legal Documents and Document Drafting Handbook. These documents are available via the Internet at http://www.nara.gov/fedreg/dldhome.html and http://www.nara.gov/fedreg/ddhhome.html, respectively.
NPR plain language web site: http://www.plainlanguage.gov
(1) The FAR contains parts, subparts, sections, and subsections. Every FAR section and subsection has an identifying number. The number to the left of the decimal point identifies the part number. The numbers between the decimal point and the dash identify the subpart (one or two digits) and the section (two digits). The number to the right of the dash is the subsection. The following is an example of FAR numbering
(3) Do not use unnumbered or unlettered paragraphs, except in sections and subsections containing only one paragraph (see paragraph (d)(2) of this chapter for special treatment of definitions).
(4) Number the "Scope" section of each part by placing three zeros after the decimal point (e.g., number a "Scope" section summarizing Part 12 as "12.000").
(5) If using a "Scope" section to summarize a subpart, number the section by placing two zeros after the subpart number (e.g., number a "Scope" section summarizing Subpart 12.3 as "12.300").
(6) For guidance concerning the numbering of solicitation provisions and contract clauses, see paragraph (e) of this chapter.
(b) Headings. Use informative headings that best describe the contents of the division.
(1) Use a heading for all parts, subparts, sections, and subsections.
(2) When necessary, include at the beginning of a part or subpart, under the most appropriate heading, the circumstances under which the part or subpart applies and any exceptions. This section follows any "Scope" or "Definitions" section.
(3) For multiple paragraphs within a section or subsection—
(i) Use headings when necessary to assist the reader in locating material more easily;
(ii) Be consistent in the use of headings (all paragraphs at the same level of division within any section or subsection either should or should not use headings);
(iii) If using a heading, italicize it and begin the text on the same line, immediately following the heading; and
(iv) When a breakdown into lower divisions follows immediately without any preceding text or heading, place the first lower division designation on the same line as the higher division designation.
(a) Transmittal. Contracting officers must . . .
(1) Electronic transmission. All synopses transmitted . . .
(2) Hard copy transmission. When electronic transmission is . . .
(b) Format. The contracting officer must . . .
(1) General. Format for all synopses must . . .
(2) Spacing. Begin each line flush left . . .
14.409-1 Award of unclassified contracts.
(a)(1) The contracting officer must…
(c) Scope. Use a "Scope" section to summarize a part. Generally, it is also useful to include a "Scope" section in a subpart.
(1) Enclose a defined term in quotation marks followed by the word "means."
(2) List definitions in alphabetical order and do not number or otherwise identify them. If a definition contains more than one paragraph, number the paragraphs starting with "(1)".
(3) If a term requiring definition in the FAR is used in more than one part, define it in Subpart 2.1.
(4) If a term, as used in a specific part or subpart, has a different meaning than its common meaning or as it is defined in Subpart 2.1, define it in the part or subpart where it is used.
(i) If defining a single term, use the heading "Definition." and insert the phrase, ", as used in this part (or subpart), means…", after the term.
(ii) If defining multiple terms, use the heading "Definitions." and the introductory phrase, "As used in this part (or subpart)—".
(iii) Place a reference to a definition for a specific part or subpart in Subpart 2.1.
"Subcontract" means ..., except as follows:
(1) For use in 3.502, see the definition at 3.502-1.
(2) For use in Part 12, see the definition at 12.001.
(6) See paragraph (e)(2)(v) of this chapter for guidance concerning definitions in solicitation provisions and contract clauses.
(e) Solicitation Provisions and Contract Clauses.
(1) General. Use—
(i) "Solicitation provision" or "provision" for items used only in solicitations and applying before award; and
(ii) "Contract clause" or "clause" for items used in both solicitations and contracts, applying after award or both before and after award.
(i) Put the text of all provisions and clauses in Subpart 52.2, following the conventions in this document.
(ii) Direct provisions and clauses to the offeror or contractor. Provisions and clauses must adequately convey the responsibility of the offeror or contractor and must be consistent with the subject text.
(iii) Do not use provisions or clauses to prescribe policy not found in the subject text. The subject text must prescribe all policy and must stand alone without referring to a provision or clause.
(iv) Provisions and clauses also should stand alone. Do not refer to the subject text of the FAR in provisions and clauses, unless necessary to avoid extremely lengthy repetition of passages verbatim from the subject text.
(v) Include definitions, if needed, in the first paragraph. If defining a term in the subject text and using the term in a provision or clause, include the same definition of the term in the provision or clause. Restrict the definition to use in the provision or clause, because the same term may have a different use in another provision or clause. If defining a single term, use the heading "Definition." and insert the phrase, ", as used in this provision (or clause), means…," after the term. If defining multiple terms, use the heading "Definitions." and the introductory phrase, "As used in this provision (or clause)—".
(vi) Do not include instructions to Government personnel in provisions or clauses, other than instructions to the contracting officer for insertion of text. Provide a blank line for the insertion. Italicize the instructions and enclose them in brackets.
(vii) Do not combine provisions and clauses.
(3) Numbering. Identify provisions and clauses in Part 52 by number, title, and date. All FAR provision and clause numbers begin "52.2", since all provisions and clauses appear only in Subpart 52.2. The next two digits correspond to the number of the FAR part where the provision or clause is prescribed. Assign the number following the hyphen sequentially within each section of Subpart 52.2. Alternatively, use a number in the appropriate section identified as "Reserved."
52.203-2, Certificate of Independent Price Determination.
52 - Part (Invariable)
2 - Subpart (Invariable)
03 - Identifies the part that prescribes the provision
(Part 3, Improper Business Practices and Personal Conflicts of Interest)
-2 - Indicates that this is the second provision in section 52.203.
(4) Title.Give each provision or clause a unique, descriptive title based on its contents and application. No two provisions or clauses may have the same title.
(5) Date.Include the date of provision or clause codification (Federal Register publication) by month (abbreviated to first three letters) and year in parentheses after the provision or clause title, e.g., "(JUN 1996)". Also include a date for each provision or clause alternate. When revising a provision, clause, or alternate, revise its corresponding date. If the date is unknown at the time of drafting, use "(DATE)" instead.
(i) To make it easier to locate provision and clause prescriptions, consolidate the prescriptions in a subpart, section, or subsection with a separate heading at the end of the text that describes the subject matter.
(ii) Do not prescribe a provision or clause in more than one place in the FAR. Use cross-references if necessary.
(iii) Include in the prescription all conditions, requirements, and instructions for using the provision or clause and any alternates. Also include instructions for any optional use of the provision or clause. For example, consider the following:
(A) Where used (solicitation only, contract only, both).
(B) Requirement (mandatory, optional).
(C) Type of acquisition (purchase, lease).
(D) Purchase procedures (simplified acquisition, sealed bidding, negotiated, competitive, sole source, set-asides).
(E) Acquisition value (estimated, actual).
(F) Dollar threshold (micro-purchase, simplified acquisition, trade agreement).
(G) Type of commodity (e. g., supply, service, construction, research and development, architect-engineer, major system, commercial item).
(H) Type of contract (e.g., firm-fixed-price, fixed-price incentive, cost-plus-fixed-fee, award-fee, time-and-materials).
(I) Location of purchasing office (inside, outside U.S.).
(J) Location of item use (inside, outside U.S.).
(K) Contractor location/place of performance (inside, outside U.S.).
(L) Type of contractor (commercial, nonprofit, educational, Federally Funded Research and Development Center).
(M) Size and status of contractor (e.g., large, small, small disadvantaged, women-owned small business).
(iv) Do not use the word "all" in provision or clause prescriptions unless the provision or clause is required in all solicitations or contracts without exception.
(v) Include in the provision or clause prescription any directions for completing (filling in the blanks) or modifying the provision or clause.
XX.XXX Solicitation provision and contract clause.
(a) Insert the provision at [specify number and title] in solicitations for research and development contracts.
(b)(1) Except as provided in paragraph (b)(2) of this section, insert the clause at—
(i) [specify number and title] in solicitations and contracts for supplies valued at less than $; or
(ii) [specify number and title] in solicitations and contracts for services—
(A) Listed in [specify ]; or
(B) Valued at less than $.
(2) Do not use the clauses in paragraph (b)(1) of this section in--
(i) Solicitations issued and contracts awarded by a contracting office located outside of the United States and its territories, if the supplies will be used or the services will be performed outside of the United States and its territories;
(ii) Acquisitions valued at or below the simplified acquisition threshold that are awarded using simplified acquisition procedures;
(iii) Total small business set-asides;
(iv) Contracts in support of U.S. national security interests;
(v) Contracts for essential spare, repair, or replacement parts available only from sanctioned European Union member states; or
(vi) Contracts for which the head of the agency has made a determination in accordance with [specify].
(7) Introductory Text.
Include introductory text for each provision or clause as follows:
(i) Modifications are slight changes in details that do not alter the substance of the provision or clause.
(ii) To permit modifications to a provision or clause to fit various situations, include in the prescription the authorization to make the modifications, as in—
(A) "The contracting officer may use a period shorter than 60 days (but not less than 30 days) in paragraph (x) of the clause"; or
(B) "The contracting officer may substitute the words "task order" for the word "Schedule" wherever that word appears in the clause."
(i) Variations are more significant changes that retain the salient features of the provision or clause and that are consistent with the intent, principle, and substance of the provision or clause.
(ii) To permit variations, prescribe the provision or clause on a "substantially the same as" basis.
(i) Alternates make substantive changes to a provision or clause, and are specifically provided in the FAR. Alternates operate by deleting language from or adding language to the basic provision or clause, or by substituting language for language in the basic provision or clause.
(ii) Put provision or clause alternates directly after the basic provision or clause.
(iii) Since alternates do not stand alone, word the provision or clause prescription to include both the basic provision or clause and any alternates (e.g., if a clause is prescribed only for fixed-price contracts, it cannot have an alternate for use in cost-reimbursement contracts).
(iv) Do not use the term "basic provision" or "basic clause" in the prescription of a provision or clause alternate. Use the terms in the introductory text of the provision and clause alternates in Part 52. The introductory text gives instructions on the specific changes to be made to the basic provision or clause. After changing the basic provision or clause as required by the introductory text, it no longer is the "basic" provision or clause.
(1) Prescriptions for Clause Alternates.
"Alternate I (DATE). As prescribed in [specify], add the following paragraph (d) to the basic clause: [specify]"
"Alternate I (DATE). As prescribed in [specify], substitute the following paragraph (a) for paragraph (a) of the basic clause: [specify]"
"Alternate I (DATE). As prescribed in [specify], delete paragraph (a) of the basic clause and renumber the remaining paragraphs accordingly."
"Alternate I (DATE). As prescribed in [specify], delete the second sentence from paragraph (a) of the basic clause."
"Alternate I (DATE). As prescribed in [specify], delete paragraph (a) of the basic clause, renumber the remaining paragraphs accordingly, and add the following paragraph (g): [specify]"
(11) Flow Down.
(i) To flow a clause down to first-tier subcontracts only, use a final paragraph such as—
"(d) The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts that exceed $100,000."
(f) Clause Matrix.
The solicitation provisions and contract clauses matrix at FAR 52.301 is a useful tool for contracting officers. To keep the matrix current, include a Matrix Data Form (Exhibit 1) with each proposed FAR revision that adds, deletes, or revises the prescription for a solicitation provision or contract clause.
(1) Place optional and standard forms prescribed by the FAR in Part 53. Include in Part 53 only those forms prescribed by the FAR.
(2) Include the prescription for use of a form in the appropriate FAR subject text.
(3) Do not prescribe a form in more than one place in the FAR. Use cross-references if necessary.
(4) Refer to optional and standard forms by number and title, e.g., Standard Form 1449, Solicitation/Contract/Order for Commercial Items, the first time mentioned in a subpart. You may abbreviate subsequent references within the subpart, e.g., SF 1449.
Identify terms for inclusion in or deletion from the FAR index when drafting an interim or final FAR revision containing or removing any of the following types of terms:
(1) Terms defined in FAR subject text, provisions, or clauses.
(2) Common search terms.
(3) Popular or unique terms applicable to the material, e.g., A-76 or NAFTA.
(4) Major nouns in headings that identify the unique substance of the text.
(5) Terms that explain the purpose or the issue being resolved by the text.
(i) Impact on Commercial and Simplified Acquisition Provisions and Clauses.
(1) When adding, deleting, or amending a clause, consider the impact on the clauses at—
(i) 52.212-4, Contract Terms and Conditions—Commercial Items;
(ii) 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Items;
(iii) 52.213-4, Terms and Conditions—Simplified Acquisitions (Other Than Commercial Items); and
(iv) 52.244-6, Subcontracts for Commercial Items and Commercial Components.
(2) When adding, deleting, or amending a provision, consider the impact on the provisions at—
(i) 52.212-1, Instructions to Offerors—Commercial Items;
(ii) 52.212-2, Evaluation—Commercial Items; and
(iii) 52.212-3, Offeror Representations and Certifications—Commercial Items.
CHAPTER 4--DRAFTING CONVENTIONS
(a) Avoid overuse of abbreviations. Do not abbreviate terms that you use only a few times in a Part.
(ii) Follow the word with the abbreviation or acronym in parentheses, e.g., Internal Revenue Service (IRS).
(2) Well-known, universally familiar abbreviations and acronyms need not be spelled out, e.g., U.S., DoD, NASA, and OMB.
(3) Do not put an abbreviation or acronym in a title, unless it is a well-known, universally familiar abbreviation or acronym.
(4) Use "i.e." to mean "that is" and use "e.g." to mean "for example."
(5) The Government Printing Office Style Manual provides correct abbreviations for many standard terms. Check to see whether periods are included in the abbreviation. Some common abbreviations:
|Code of Federal Regulations
United States Code
If it is necessary to include an address in the FAR, use the following format:
(1) For a mailing address:
|General Services Administration
Federal Supply Service
470 East L’Enfant Plaza, SW
Washington, DC 20407
"... is available via the Internet at http://..."
(1) Use a capital letter to begin the first word of a section, subsection, or paragraph heading and the first word of each item in a vertical list. Capitalize other words of a heading or vertical list only if required for other reasons.
(2) Use a capital letter to begin each major word of a subpart heading.
(3) Write names of parts, provisions, clauses, and forms entirely in capital letters when they appear as titles. When referring to them in text material or in headings, capitalize only the major words (e.g., see the clause entitled "Restrictions on Certain Foreign Purchases").
(4) Capitalize the following terms:
(i) "State" when referring to one of the fifty United States, whether or not a specific State is intended.
(ii) "Government" or "Department" when referring to specific national governmental units. (When capitalized, "Government" refers to the U.S. Government).
(iii) "Contractor" and "Contracting Officer" only in acquisition forms, solicitation provisions, and contract clauses.
(iv) "Schedule" when referring to that part of a contract (Part I of the uniform contract format).
(v) "Title," "Chapter," "Subchapter," "Part," and "Subpart" only when they are followed by the number of the division.
(5) Unless capitalization is required for other reasons do not capitalize—
(i) Words naming individuals in a general sense, such as head of an agency, contractor, contracting officer, offeror, supplier, architect, or engineer;
(ii) Words referring to an entity in a general sense, such as a department, an agency, or a possession;
(iii) The word "government" when referring to State, local, or foreign governments;
(iv) The word "clause" when citing a specific clause by name, such as "Termination clause"; or
(v) The word "section," "subsection," or "paragraph," whether or not a number follows.
(1) Use cross-references only when necessary to ensure comprehensive understanding of the meaning of the guidance or to save excessive repetition.
(2) When using cross-references, refer to a—
(i) Part or subpart by the title "Part" or "Subpart," respectively, followed by the part or subpart number, e.g., "Part 22" or "Subpart 22.10";
(ii) Section or subsection by the number only, e.g., "22.1012" or "22.1012-2";
(iii) Paragraph within a section, subsection, provision, or clause by using the following format: "paragraph (a) of this section (subsection, provision, or clause);
(iv) Paragraph of another section or subsection by the section or subsection number followed by the paragraph designation, e.g., "22.1012-3(d)(2)"; and
(v) Paragraph of a provision or clause, in the subject text, by the paragraph designation and provision or clause number and title, e.g., "paragraph (a) of the clause at 52.222-50, Nondisplacement of Qualified Workers."
(3) Use the term "paragraph" to refer to all levels of paragraph division. Do not use the term "subparagraph."
(4) Do not use terms such as "herein," "above," "below," and "as set forth elsewhere."
(5) When referring to a designation that is uncertain at the time of drafting, insert an "X" in the uncertain part of the designation, e.g., SF XXXX, 4.804-X, or 52.204-X. Use "Y" or "Z" as necessary to refer to additional uncertain designations, e.g., SF XXXY, 4.804-Y, 4.804-Z, 52.204-Y, 52.204-Z.
Write dates included in text in the sequence of month, day, and year, e.g.,
"June 27, 1999." Abbreviate dates following provision and clause titles, using the following format: "(JUN 1999)."
(g) Delegation of Authority.
Individuals granted authority in the FAR may delegate that authority, unless the FAR specifically states that the authority is not delegable. Therefore, do not use terms such as "the agency head or a designee" or "the agency head or an authorized representative" for functions that are delegable; and clearly identify functions that are not delegable.
(h) Dollar Thresholds.
(1) Dollar thresholds in the FAR include the value of the basic contract and all priced options, unless otherwise specified.
(2) Use terms such as "exceeding," "or more," "less than," or "or less" to define thresholds based on dollar amount.
The contracting officer must request a report for each proposal exceeding $500,000.
If the contractor received contracts or subcontracts totaling $50 million or more, . . . .
Do not use gender-specific terminology.
(1) When a number is spelled out, do not repeat it in figures, e.g., "two (2)." Instead, just use "two."
(2) Express dollars as figures, e.g., $186,000; do not spell out except large even amounts, e.g., "$20 million."
(1) Periods. Insert periods after headings.
(2) Colons, semi-colons, and dashes. Use colons or dashes to introduce vertical lists.
(i) If the introductory language of a vertical list is a complete sentence (as in this example), use the following conventions:
(A) End the introduction with a colon.
(B) Do not connect items by conjunctions.
(C) End each item with a period, unless the last item introduces another list, in which case the last item ends with a dash or a colon.
(ii) If the introductory language of a vertical list is not a complete sentence (as in this example)—
(A) End the introduction with a dash;
(B) End all but the last item with a semicolon;
(C) Connect the last two items with a conjunction; and
(D) End the last item with a period, unless it introduces another list, in which case the last item ends with a dash or colon.
(1) Use quotation marks to enclose a direct quotation.
(2) Place periods and commas inside the closing quotation mark. Place semicolons and colons outside the closing quotation mark. The only exception to this rule is when showing changes to current FAR language where the punctuation is not part of the revised material.
Review the following items in the file labeled "In Process": the latest draft agreement and activity comments.
Amend Part 13 by deleting the words "small purchase limitation" and inserting the words "simplified acquisition threshold".
(1) General. When a FAR text segment, provision, or clause implements a statute, Executive order, OMB circular, OFPP policy letter, or relevant portion of the Code of Federal Regulations, cite that authority.
(2) Citations in text. To make it easier to refer to sources, observe the following guidelines when citing specific authorities:
(i) Place a parenthetical citation pertaining to a single sentence at the end of the sentence, before the period. If the citation relates only to part of the sentence, place the citation immediately after that part of the sentence. Place a citation relating to an entire paragraph at the end of the paragraph, following the final period.
(ii) Do not use the term "as amended" in a citation. Citations include reference to all applicable amendments unless otherwise stated.
(ii) If the statute is in the United States Code and the citation is not cumbersome, cite the United States Code without the public law number.
Anti-Deficiency Act (31 U.S.C. 1341)
Clean Air Act (42 U.S.C. 7401, et seq.)
Javits-Wagner-O’Day Act (41 U.S.C. 46-48c)
(iv) If a statute appears in many scattered sections or titles of the United States Code and citation to all parts would be cumbersome, give the public law number.
(v) If only one section or paragraph of a statute is relevant, cite that section or paragraph specifically.
Section 27 of the Office of Federal Procurement Policy Act
(41 U.S.C. 423)
(n) Telephone and Facsimile Numbers.
Telephone and facsimile numbers change often. Therefore, include them in the FAR only when necessary.
CHAPTER 5--FAR TERMINOLOGY
(a) The FAR uses various forms of affirmation when requiring an offeror or contractor to provide assurance regarding the accuracy of information provided to the Government. "Certification," "representation," and "declaration" are common terms of affirmation.
(b) Congress has specifically prohibited the requirement for a "certification" by a contractor or offeror unless—
(1) The "certification" is required by statute; or
(2) The FAR Council obtains approval of the "certification" requirement from the OFPP Administrator. Sufficient justification must exist to support the request.
(c) The limitations regarding "certification" also apply when implementing a Federal agency regulation or other policy directive, including an Executive order that contains a "certification" requirement. If a statute does not impose the "certification," the OFPP Administrator must approve the "certification" requirement.
(d) Restrict the use of other terms of affirmation. Use the term "represents" when asking the offeror to provide information upon which the Government will rely in awarding a contract. The imposition of such a requirement does not need approval by the OFPP Administrator, but provide a justification for the requirement in the background section of the Federal Register notice.
Contractor. Use "contractor" to refer to the prime contractor only. (Also see "Potential offeror, offeror, prospective contractor, contractor.")
(a) When referring to a response solely to—
(i) An invitation for bids (IFB), use the term "bid";
(ii) A request for proposals (RFP), use the term "proposal";
(iii) A request for quotations (RFQ), use the term "quote" or "quotation."
(b) When referring to responses to both IFBs and RFPs, use the term "offers."
(c) When referring to responses to IFBs, RFPs, and RFQs, use the term "offers and quotes."
(a) When referring to a respondent solely to—
(i) An IFB, use the term "bidder";
(ii) A RFP, use the term "offeror";
(iii) A RFQ, use the term "quoter."
Potential offeror/offeror/prospective contractor/contractor. Distinguish between these as follows: A "potential offeror" is an entity that possibly will submit an offer to perform a contract. Once an entity submits an offer, that entity becomes an "offeror." A "prospective contractor" is one being considered or tentatively selected for award but to whom award has not yet been made. A "contractor" is one to whom award has been made.
(a) Use the terms "shall" and "must" to indicate an obligation to act. In the FAR "shall" and "must" have the same meaning. "Must" is the preferred term to use in FAR text other than provisions and clauses.
(b) Use the term "should" to indicate an expected course of action or policy to be followed unless inappropriate for a particular circumstance.
(c) Use "will" to indicate an anticipated future action or result.
(d) Use "may" to indicate a discretionary action.
Solicitation. Use the term "solicitation" to refer to an invitation for bids, a request for proposals, or request for quotations. Use the more limited term, i.e., invitation for bids, if the policy only applies in sealed bidding, or request for proposals (or request for quotations, as appropriate), if the policy only applies to negotiation.
Solicitation amendment/ contract modification. Use—
(a) "Amendment" to refer to a change made to a solicitation before contract award (FAR 14.208 and 15.206).
(b) "Contract modification" to refer to a written change to the terms of a contract.
Use the term "warranty," only when referring to a contractor's promise
or affirmation regarding the nature, usefulness, or condition of supplies
or services furnished under a contract, does not require separate justification.
Do not use the term when referring to an affirmation that is a certification
FAR PROVISIONS AND CLAUSES MATRIX UPDATE FORM
Type of Contract:
P or C = Provision or Clause
IBR = Is Incorporation by Reference Authorized?
(See FAR 52.102)
UCF = Uniform Contract Format Section, when Applicable
FP SUP = Fixed-Price Supply
CR SUP = Cost-Reimbursement Supply
FP R&D = Fixed-Price Research & Development
CR R&D = Cost-Reimbursement Research & Development
FP SVC = Fixed-Price Service
CR SVC = Cost-Reimbursement Service
FP CON = Fixed-Price Construction
CR CON = Cost-Reimbursement Construction
T&M LH = Time & Material/Labor Hours
LMV = Leasing of Motor Vehicles
COM SVC = Communication Services
or Removal of Improvements
FP A&E = Fixed-Price Architect-Engineering
CR A&E = Cost-Reimbursement Architect-Engineering
FAC = Facilities
IND DEL = Indefinite Delivery
TRN = Transportation
SAP = Simplified Acquisition Procedures
UTL SVC = Utility Services
CI = Commercial Items
R = Required
A = Required when Applicable
O = Optional
v = Revision
___ Check if prescription requires use in SBA 8(a) contracts. (See Note 2 at end of Matrix)
___ Check if prescription requires use in SBA 8(a) contracts. (See Note 2 at end of Matrix)