Skip Navigation to main content U.S. Department of Energy Energy Efficiency and Renewable Energy
Bringing you a prosperous future where energy is clean, abundant, reliable, and affordable
Energy Savers
Your HomeYour VehicleYour WorkplaceProducts and ServicesRenewable EnergyInformation ResourcesHome
Your Home
Apartments Appliances and Electronics Designing and Remodeling Electricity Buy Clean Electricity Green Pricing Competitive Markets Green Certificates Technologies Making Clean Electricity Reducing Electricity Use Electric Meter Reading Energy Audits Insulation and Air Sealing Landscaping Lighting and Daylighting Space Heating and Cooling Water Heating Windows, Doors and Skylights
Learn More

Department of Energy Resources

Calculators and Evaluation Tools
Bookmark and Share Printable Version

Geothermal Power

In the United States, geothermal energy has been used to generate electricity on a large-scale since 1960. Through research and development, geothermal power is becoming more cost effective and competitive with fossil fuels.

Heat from the Earth—geothermal energy—heats water that has seeped into underground reservoirs. These reservoirs can be tapped for a variety of uses, depending on the temperature of the water. The energy from high temperature reservoirs (225º–600ºF) can be used to produce electricity. There are currently three types of geothermal power plants:

  • Dry steam

    Dry steam plants use steam from underground wells to rotate a turbine, which activates a generator to produce electricity. There are only two known underground resources of steam in the United States: The Geysers in northern California and Old Faithful in Yellowstone National Park. Since Yellowstone is protected from development, the power plants at The Geysers are the only dry steam plants in the country.

  • Flash steam

    A photo of steam emanating from geothermal power plants at The Geysers in California.

    Geothermal energy originates from deep within the Earth and produces minimal emissions.
    Photo credit: Pacific Gas & Electric

    The most common type of geothermal power plant, flash steam plants use waters at temperatures greater than 360ºF. As this hot water flows up through wells in the ground, the decrease in pressure causes some of the water to boil into steam. The steam is then used to power a generator, and any leftover water and condensed steam is returned to the reservoir.

  • Binary cycle

    Binary cycle plants use the heat from lower-temperature reservoirs (225º–360ºF) to boil a working fluid, which is then vaporized in a heat exchanger and used to power a generator. The water, which never comes into direct contact with the working fluid, is then injected back into the ground to be reheated.

Where It's Available

Current drilling technology limits the development of geothermal resources to relatively shallow water- or steam-filled reservoirs, most of which are found in the western part of the United States. But researchers are developing new technologies for capturing the heat in deeper, "dry" rocks, which would support drilling almost anywhere.

Larger image of geothermal resources map

Geothermal Resources Map

This map shows the distribution of geothermal resources across the United States. If you have trouble accessing this information because of a disability, please contact the Webmaster.