![[logo] US EPA](https://webarchive.library.unt.edu/eot2008/20081106091214im_/http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}
ZI-400
TECHNICAL PRODUCT BULLETIN #D-13
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: JUNE 16, 2005
REVISED LISTING DATE:
"ZI-400"
(a/k/a ZI-400 OIL SPILL DISPERSANT)
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: JUNE 16, 2005
REVISED LISTING DATE:
"ZI-400"
(a/k/a ZI-400 OIL SPILL DISPERSANT)
| I. NAME, BRAND, OR TRADEMARK |
|
ZI-400 Type of Product: Dispersant |
| II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
|
Z.I. Chemicals P.O. Box 1112 Studio City, CA 91614 Phone: (818) 770-6225 Fax: (818) 479-8222 Email: sales@zichemicals.com Website: www.zichemicals.com 
(Mr. Barnaby Zelman) |
| III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
|
Z.I. Chemicals P.O. Box 1112 Studio City, CA 91614 Phone: (818) 770-6225 Fax: (818) 479-8222 Email: sales@zichemicals.com Website: www.zichemicals.com
(Mr. Barnaby Zelman) |
| IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
|
1. Flammability: Non-flammable (DOT: Non-Hazardous). 2. Ventilation: No special requirements. 3. Skin and eye contact; protective clothing; treatment in case of contact: No special equipment or clothing required; however, goggles are recommended. If eye or skin irritation occurs flush with plenty of water. 4.a. Maximum storage temperature: 120ºF continuous, 140°F up to 5 days 4.b. Minimum storage temperature: 35ºF 4.c. Optimum storage temperature range: 40 - 120ºF 4.d. Temperatures of phase separations and chemical changes: Stable |
| V. SHELF LIFE |
| Unlimited in sealed polydrums of totes (as delivered). |
| VI. RECOMMENDED APPLICATION PROCEDURE |
|
1. Application Method: ZI-400 may be applied by the usual method of aerial or boat spraying. For smaller spills a drum pump with sprayer may be used, mixing with water as required depending on the type and viscosity of oil being treated. 2. Concentration/Application Rate: On heavy oils use ZI-400 directly on the spill, or up to approximately a 1:10 dilution ratio (product:water). Lighter oils will require a 1:10 to 1:30 product to water dilution ratio. Warmer waters (greater than 78°F) and/or good agitation during application will require less product. 3. Conditions for Use: No limitations as to usage within in optimum temperature parameters (application may be made at or above 35°F, with optimum above 48°F). |
| VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||||||||||||||
a. Toxicity
b. Effectiveness: SWIRLING FLASK DISPERSANT EFFECTIVENESS TEST WITH SOUTH LOUISIANA (S/L) AND PRUDHOE BAY (P/B) CRUDE OIL VENDOR LAB REPORT:
|
| VIII. MIROBIOLOGICAL ANALYSIS |
| NA |
| IX. PHYSICAL PROPERTIES |
|
1. Flash Point, ASTM D-56: >93ºC 2. Pour Point, ASTM D-97: 12.6ºF 3. Viscosity, ASTM D-445: 18.80 cSt @40ºC 4. Specific Gravity, ASTM D-1298: 1.026 @60ºF 5. pH, ASTM 1293: 10.9 6. Surface Active Agents: Proprietary. 7. Solvents: Proprietary. 8. Additives: None. 9. Solubility: Miscible in oil, water, and solvents. |
| X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||
|