www.OSHA.gov | |
Federal Registers
Semiannual Regulatory Agenda - 72:22828-22871 |
![]() |
Publication Date: | 04/30/2007 |
Publication Type: | Unified Agenda |
Fed Register #: | 72:22828-22871 |
Standard Number: | 1910; 1915; 1917; 1918; 1926 |
Title: | Semiannual Regulatory Agenda |
NOTE: This section for the Department of Labor (OSHA)
is on pages 22861 - 22870 Occupational Safety and Health Administration -- Prerule Stage
Occupational Safety and Health Administration -- Proposed Rule Stage
Occupational Safety and Health Administration -- Final Rule Stage
Occupational Safety and Health Administration -- Long-Term Actions
Occupational Safety and Health Administration -- Completed Actions
1824. OCCUPATIONAL EXPOSURE TO CRYSTALLINE SILICA Priority: Economically Significant. Major under 5 USC 801. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 29 USC 657 CFR Citation: 29 CFR 1910; 29 CFR 1915; 29 CFR 1917; 29 CFR 1918; 29 CFR 1926 Legal Deadline: None Abstract: Crystalline silica is a significant component of the earth's crust, and many workers in a wide range of industries are exposed to it, usually in the form of respirable quartz or, less frequently, cristobalite. Chronic silicosis is a uniquely occupational disease resulting from exposure of employees over long periods of time (10 years or more). Exposure to high levels of respirable crystalline silica causes acute or accelerated forms of silicosis that are ultimately fatal. The current OSHA permissible exposure limit (PEL) for general industry is based on a formula recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) in 1971 (PEL=10mg/cubic meter/(% silica + 2), as respirable dust). The current PEL for construction and maritime (derived from ACGIH's 1962 Threshold Limit Value) is based on particle counting technology, which is considered obsolete. NIOSH and ACGIH recommend a 50ì/m3 exposure limit for respirable crystalline silica. Both industry and worker groups have recognized that a comprehensive standard for crystalline silica is needed to provide for exposure monitoring, medical surveillance, and worker training. The American Society for Testing and Materials (ASTM) has published a recommended standard for addressing the hazards of crystalline silica. The Building Construction Trades Department of the AFL-CIO has also developed a recommended comprehensive program standard. These standards include provisions for methods of compliance, exposure monitoring, training, and medical surveillance. Statement of Need: Over 2 million workers are exposed to crystalline silica dust in general industry, construction and maritime industries. Industries that could be particularly affected by a standard for crystalline silica include: foundries, industries that have abrasive blasting operations, paint manufacture, glass and concrete product manufacture, brick making, china and pottery manufacture, manufacture of plumbing fixtures, and many construction activities including highway repair, masonry, concrete work, rock drilling, and tuckpointing. The seriousness of the health hazards associated with silica exposure is demonstrated by the fatalities and disabling illnesses that continue to occur; between 1990 and 1996, 200 to 300 deaths per year are known to have occurred where silicosis was identified on death certificates as an underlying or contributing cause of death. It is likely that many more cases have occurred where silicosis went undetected. In addition, the International Agency for Research on Cancer (IARC) has designated crystalline silica as a known human carcinogen. Exposure to crystalline silica has also been associated with an increased risk of developing tuberculosis and other nonmalignant respiratory diseases, as well as renal and autoimmune respiratory diseases. Exposure studies and OSHA enforcement data indicate that some workers continue to be exposed to levels of crystalline silica far in excess of current exposure limits. Congress has included compensation of silicosis victims on Federal nuclear testing sites in the Energy Employees' Occupational Illness Compensation Program Act of 2000. There is a particular need for the Agency to modernize its exposure limits for construction and maritime workers, and to address some specific issues that will need to be resolved to propose a comprehensive standard. Summary of Legal Basis: The legal basis for the proposed rule is a preliminary determination that workers are exposed to a significant risk of silicosis and other serious disease and that rulemaking is needed to substantially reduce the risk. In addition, the proposed rule will recognize that the PELs for construction and maritime are outdated and need to be revised to reflect current sampling and analytical technologies. Alternatives: Over the past several years, the Agency has attempted to address this problem through a variety of non-regulatory approaches, including initiation of a Special Emphasis Program on silica in October 1997, sponsorship with NIOSH and MSHA of the National Conference to Eliminate Silicosis, and dissemination of guidance information on its Web site. The Agency is currently evaluating several options for the scope of the rulemaking. Anticipated Cost and Benefits: The scope of the proposed rulemaking and estimates of the costs and benefits are still under development. Risks: A detailed risk analysis is under way. Timetable:
Regulatory Flexibility Analysis Required: Yes Small Entities Affected: Businesses Government Levels Affected: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB70 1825. OCCUPATIONAL EXPOSURE TO BERYLLIUM Priority: Economically Significant. Major under 5 USC 801. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 29 USC 657 CFR Citation: 29 CFR 1910 Legal Deadline: None Abstract: In 1999 and 2001, OSHA was petitioned to issue an emergency temporary standard by the Paper Allied-Industrial, Chemical, and Energy Workers Union, Public Citizen Health Research Group and others. The Agency denied the petitions but stated its intent to begin data gathering to collect needed information on beryllium's toxicity, risks, and patterns of usage. On November 26, 2002, OSHA published a Request for Information (RFI) (67 FR 70707) to solicit information pertinent to occupational exposure to beryllium including: current exposures to beryllium; the relationship between exposure to beryllium and the development of adverse health effects; exposure assessment and monitoring methods; exposure control methods; and medical surveillance. In addition, the Agency conducted field surveys of selected work sites to assess current exposures and control methods being used to reduce employee exposures to beryllium. OSHA is using this information to develop a proposed rule addressing occupational exposure to beryllium. Timetable:
Regulatory Flexibility Analysis Required: Yes Small Entities Affected: Businesses Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB76 1826. IONIZING RADIATION Priority: Other Significant Legal Authority: 29 USC 655(b) CFR Citation: 29 CFR 1910.109 Legal Deadline: None Abstract: OSHA is considering amending 29 CFR 1910.1096 that addresses exposure to ionizing radiation. The OSHA regulations were published in 1974, with only minor revisions since that time. The Department of Energy and the Nuclear Regulatory Commission both have more extensive radiation standards that reflect new technological and safety advances. In addition, radiation is now used for a broader variety of purposes, including health care, food safety, mail processing, and baggage screening. OSHA is in the process of reviewing information about the issue, and will determine the appropriate course of action regarding this standard when the review is completed. A request for information was published on May 3, 2005. Subsequently, the National Academy of Science released the latest version of a significant report on the biological effects of ionizing radiation. OSHA extended the comment period on the request for information to ensure commenters had the opportunity to consider this new report. The next step for the ionizing radiation project is to hold discussions with key stakeholders. OSHA plans to hold a series of meetings targeted to specific stakeholder groups including state organizations with responsibility for worker exposure to ionizing radiation, professional associations and specific industry groups such as dental, medical and veterinary professionals. OSHA believes that these targeted meetings will be detailed technical discussions that will inform the Agency on current practices, the use of radiation devices and approaches to protecting employees from exposure to ionizing radiation. Timetable:
Regulatory Flexibility Analysis Required: Undetermined Government Levels Affected: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC11 1827. EMERGENCY RESPONSE AND PREPAREDNESS Priority: Other Significant. Major status under 5 USC 801 is undetermined. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 29 USC 657 CFR Citation: 29 CFR 1910 Legal Deadline: None Abstract: Emergency responder health and safety is currently regulated primarily under the following standards: the fire brigade standard (29 CFR 1910.156); hazardous waste operations and emergency response (29 CFR 1910.120); the respiratory protection standard (29 CFR 1910.134); the permit-required confined space standard (29 CFR 1910.146); and the bloodborne pathogens standard (29 CFR 1910.1030). Some of these standards were promulgated decades ago and none were designed as comprehensive emergency response standards. Consequently, they do not address the full range of hazards or concerns currently facing emergency responders. Many do not reflect major changes in performance specifications for protective clothing and equipment. Current OSHA standards also do not reflect all the major developments in safety and health practices that have already been accepted by the emergency response community and incorporated into National Fire Protection Association (NFPA) and American National Standards Institute consensus standards. OSHA will be collecting information to evaluate what action the agency should take. Timetable:
Regulatory Flexibility Analysis Required: Undetermined Government Levels Affected: Undetermined Federalism: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC17 1828. LEAD IN CONSTRUCTION (SECTION 610 REVIEW) Priority: Substantive, Nonsignificant Legal Authority: 29 USC 655(b); 5 USC 553; 5 USC 610 CFR Citation: 29 CFR 1926.62 Legal Deadline: None Abstract: OSHA will undertake a review of the Lead in Construction Standard (29 CFR 1926.62) in accordance with the requirements of the Regulatory Flexibility Act and section 5 of Executive Order 12866. The review will consider the continued need for the rule, impacts of the rule comments on the rule received from the public, the complexity of the rule, whether the rule overlaps, duplicates or conflicts with other Federal, State or local regulations, and the degree to which technology, economic conditions or other factors may have changed since the rule was last evaluated. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: None Agency Contact: John Smith, Directorate of Evaluation and Analysis, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3641, Washington, DC 20210 Phone: 202 693-2225 Fax: 202 693-1641 Email: smith.john@dol.gov RIN: 1218-AC18 1829. REVISION AND UPDATE OF STANDARDS FOR POWER PRESSES Priority: Substantive, Nonsignificant. Major status under 5 USC 801 is undetermined. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 29 USC 657 CFR Citation: 29 CFR Part 1910.217 Legal Deadline: None Abstract: The Occupational Safety and Health Administration's (OSHA) mechanical power press standard (29 CFR 1910.217) protects employees from injuries that result from working with or around mechanical power presses through the use of machine guards (prevents hands in danger zone) and through limitations on initiation of a press cycle (either two-hand or foot operated). A presence-sensing device (PSD), typically a light curtain, initiates a press cycle only when the system indicates that no objects, such as a hand, are within the hazard zone. OSHA adopted the use of presencesensing device initiation (PSDI) on mechanical power presses believing that the provision would substantially protect workers and improve productivity. However, OSHA requires PSDI systems to be validated by an OSHA-certified third party, and no organization has agreed to validate PSDI installations. OSHA performed a lookback review of PSDI and determined that the current ANSI standard permits PSDI without independent validation but includes other provisions to maintain PSDI safety. Based on its completion of the lookback review of PSDI (69 FR 31927), OSHA is planning to revise and update the standard on power presses, which currently covers only mechanical power presses. OSHA will base the revision of the 2001 or later edition of the American National Standards Institute (ANSI) standard on Mechanical Power Presses, ANSI B11.1. Further, OSHA is considering expanding the standard to cover other presses such as hydraulic and pneumatic power presses and to include the latest guarding techniques. This revision will provide the first major update of the Mechanical Power Presses Standard since it was originally published in 1971. Timetable:
Regulatory Flexibility Analysis Required: Undetermined Small Entities Affected: Businesses Government Levels Affected: Undetermined Federalism: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC22 1830. METHYLENE CHLORIDE (SECTION 610 REVIEW) Priority: Substantive, Nonsignificant Legal Authority: 29 USC 655(b); 5 USC 553; 5 USC 610 CFR Citation: 29 CFR 1910.1052 Legal Deadline: None Abstract: OSHA will undertake a review of the Methylene Chloride Standard (29 CFR 1910.1052) in accordance with the requirements of the Regulatory Flexibility Act and section 5 of Executive Order 12866. The review will consider the continued need for the rule, whether the rule overlaps, duplicates or conflicts with other Federal, State, or local regulations, and the degree to which technology, economic conditions or other factors may have changed since the rule was evaluated. Timetable:
Regulatory Flexibility Analysis Required: No Small Entities Affected: No Government Levels Affected: None Agency Contact: John Smith, Directorate of Evaluation and Analysis, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3641, Washington, DC 20210 Phone: 202 693-2225 Fax: 202 693-1641 Email: smith.john@dol.gov RIN: 1218-AC23
1831. CONFINED SPACES IN CONSTRUCTION (PART 1926): PREVENTING SUFFOCATION/EXPLOSIONS IN CONFINED SPACES Priority: Other Significant. Major status under 5 USC 801 is undetermined. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 40 USC 333 CFR Citation: 29 CFR 1926.36 Legal Deadline: None Abstract: In January 1993, OSHA issued a general industry rule to protect employees who enter confined spaces (29 CFR 1910.146). This standard does not apply to the construction industry because of differences in the nature of the worksite in the construction industry. In discussions with the United Steel Workers of America on a settlement agreement for the general industry standard, OSHA agreed to issue a proposed rule to extend confined-space protection to construction workers appropriate to their work environment. Timetable:
Required: Yes Small Entities Affected: Businesses Government Levels Affected: Undetermined Agency Contact: Steven F. Witt, Director, Directorate of Construction, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., Room N-3467, FP Building, Washington, DC 20210 Phone: 202 693-2020 Fax: 202 693-1678 RIN: 1218-AB47 1832. GENERAL WORKING CONDITIONS FOR SHIPYARD EMPLOYMENT Priority: Substantive, Nonsignificant Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 33 USC 941 CFR Citation: 29 CFR 1915 subpart F Legal Deadline: None Abstract: During the 1980s, OSHA initiated a project to update and consolidate the various OSHA shipyard standards that were applied in the shipbuilding, ship repair, and shipbreaking industries. Publication of a proposal addressing general working conditions in shipyards is part of this project. The operations addressed in this rulemaking relate to general working conditions such as housekeeping, illumination, sanitation, first aid, and lockout/tagout. About 100,000 workers are potentially exposed to these hazards annually. Timetable:
Regulatory Flexibility Analysis Required: No Small Entities Affected: No Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB50 1833. CRANES AND DERRICKS Priority: Other Significant. Major under 5 USC 801. Legal Authority: 29 USC 651(b); 29 USC 655(b); 40 USC 333 CFR Citation: 29 CFR 1926 Legal Deadline: None Abstract: A number of industry stakeholders asked OSHA to update the cranes and derricks portion of subpart N (29 CFR 1926.550), specifically requesting that negotiated rulemaking be used. In 2002 OSHA published a notice of intent to establish a negotiated rulemaking committee. A year later, in 2003, committee members were announced and the Cranes and Derricks Negotiated Rulemaking Committee was established and held its first meeting. In July 2004, the committee reached consensus on all issues resulting in a final consensus document. Statement of Need: There have been considerable technological changes since the consensus standards upon which the 1971 OSHA standard is based were developed. In addition, industry consensus standards for derricks and crawler, truck and locomotive cranes were updated as recently as 2004. The industry indicated that over the past 30 years, considerable changes in both work processes and crane technology have occurred. There are estimated to be 64 to 82 fatalities associated with cranes each year in construction, and a more up-to-date standard would help prevent them. Summary of Legal Basis: The Occupational Safety and Health Act of 1970 authorizes the Secretary of Labor to set mandatory occupational safety and health standards to assure safe and healthful working conditions for working men and women (29 USC 651). Alternatives: The alternative to the proposed rulemaking would be to take no regulatory action and not update the standards in 29 CFR 1926.550 pertaining to cranes and derricks. Anticipated Cost and Benefits: The estimates of the costs and benefits are still under development. Risks: OSHA's risk analysis is under development. Timetable:
Regulatory Flexibility Analysis Required: Undetermined Government Levels Affected: Undetermined Agency Contact: Steven F. Witt, Director, Directorate of Construction, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., Room N-3467, FP Building, Washington, DC 20210 Phone: 202 693-2020 Fax: 202 693-1678 RIN: 1218-AC01 1834. UPDATING OSHA STANDARDS BASED ON NATIONAL CONSENSUS STANDARDS Priority: Other Significant Legal Authority: 29 USC 655(b) CFR Citation: 29 CFR 1910; 29 CFR 1915; 29 CFR 1917 to 1918; 29 CFR 1926 Legal Deadline: None Abstract: Under section 6(a) of the OSH Act, during the first two years of the Act, the Agency was directed to adopt national consensus standards as OSHA standards. Some of these standards were adopted as regulatory text, while others were incorporated by reference. In the more than 30 years since these standards were adopted by OSHA, the organizations responsible for these consensus standards have issued updated versions of these standards. However, in most cases, OSHA has not revised its regulations to reflect later editions of the consensus standards. OSHA standards also continue to incorporate by reference various consensus standards that are now outdated and, in some cases, out of print. The Agency is undertaking a multi-year project to update these standards. A notice describing the project was published in the Federal Register on November 24, 2004 (69 FR 68283). The first final rule was published on September 13, 2005. Several additional sets of standards are in preparation. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC08 1835. EXPLOSIVES Priority: Other Significant Legal Authority: 29 USC 655(b) CFR Citation: 29 CFR 1910.109 Legal Deadline: None Abstract: OSHA is amending 29 CFR 1910.109 that addresses explosives and blasting agents. These OSHA regulations were published in 1974, and many of the provisions do not reflect technological and safety advances made by the industry since that time. Additionally, the standard contains outdated references and classifications. Two trade associations representing many of the employers subject to this rule have petitioned the Agency to consider revising it, and have recommended changes they believe address the concerns they are raising. Initially, OSHA planned to revise the pyrotechnics requirements in this NPRM. However, based on our work to date, it appears appropriate to reserve action on these requirements for a second phase of rulemaking. The agency therefore plans to propose revisions to 29 CFR 1910.109 without any changes to the existing pyrotechnics requirements, and at a future date will develop a proposed rule for pyrotechnics revision. Timetable:
Regulatory Flexibility Analysis Required: No Small Entities Affected: No Government Levels Affected: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC09 1836. STANDARDS IMPROVEMENT Priority: Other Significant Legal Authority: 29 USC 655(b) CFR Citation: Not Yet Determined Legal Deadline: None Abstract: OSHA is continuing its efforts to remove or revise duplicative, unnecessary, and inconsistent safety and health standards. This effort builds upon the success of the Standards Improvement Project (SIPs) Phase I published on June 18, 1998 (63 FR 33450) and Phase II published on January 5, 2005 (70 FR 1111). The Agency believes that such changes can reduce compliance costs and reduce the paperwork burden associated with a number of its standards. The Agency will only consider such changes if they do not diminish employee protections. To initiate the project, OSHA will be publishing an advance notice of proposed rulemaking (ANPRM) to solicit input from the public on rules that may be addressed in Phase III of SIPS. The Agency plans to include both safety and health topics in Phase III. Timetable:
Regulatory Flexibility Analysis Required: Undetermined Government Levels Affected: Undetermined Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC19 1837. HAZARD COMMUNICATION Priority: Other Significant Legal Authority: 29 USC 655(b); 29 USC 657 CFR Citation: 29 CFR 1910.1200; 29 CFR 1915.1200; 29 CFR 1917.28; 29 CFR 1918.90; 29 CFR 1926.59; 29 CFR 1928.21 Legal Deadline: None Abstract: OSHA's Hazard Communication Standard (HCS) requires chemical manufacturers and importers to evaluate the hazards of the chemicals they produce or import, and prepare labels and material safety data sheets to convey the hazards and associated protective measures to users of the chemicals. All employers with hazardous chemicals in their workplaces are required to have a hazard communication program, including labels on containers, material safety data sheets (MSDS), and training for employees. Within the United States (US), there are other Federal agencies that also have requirements for classification and labeling of chemicals at different stages of the life cycle. Internationally, there are a number of countries that have developed similar laws that require information about chemicals to be prepared and transmitted to affected parties. These laws vary with regard to the scope of substances covered, definitions of hazards, the specificity of requirements (e.g., specification of a format for MSDSs), and the use of symbols and pictograms. The inconsistencies between the various laws are substantial enough that different labels and safety data sheets must often be used for the same product when it is marketed in different nations. The diverse and sometimes conflicting national and international requirements can create confusion among those who seek to use hazard information. Labels and safety data sheets may include symbols and hazard statements that are unfamiliar to readers or not well understood. Containers may be labeled with such a large volume of information that important statements are not easily recognized. Development of multiple sets of labels and safety data sheets is a major compliance burden for chemical manufacturers, distributors, and transporters involved in international trade. Small businesses may have particular difficulty in coping with the complexities and costs involved. As a result of this situation, and in recognition of the extensive international trade in chemicals, there has been a longstanding effort to harmonize these requirements and develop a system that can be used around the world. In 2003, the United Nations adopted the Globally Harmonized System of Classification and Labeling of Chemicals (GHS). Countries are now considering adoption of the GHS into their national regulatory systems. There is an international goal to have as many countries as possible implement the GHS by 2008. OSHA is considering modifying its HCS to make it consistent with the GHS. This would involve changing the criteria for classifying health and physical hazards, adopting standardized labeling requirements, and requiring a standardized order of information for safety data sheets. Statement of Need: Multiple sets of requirements for labels and safety data sheets present a compliance burden for U.S. manufacturers, distributors and transports involved in international trade. Adoption of the GHS would facilitate international trade in chemicals, reduce the burdens caused by having to comply with differing requirements for the same product, and allow companies that have not had the resources to deal with those burdens to be involved in international trade. This is particularly important for small producers who may be precluded currently from international trade because of the compliance resources required to address the extensive regulatory requirements for classification and labeling of chemicals. Thus every producer is likely to experience some benefits from domestic harmonization, in addition to the benefits that will accrue to producers involved in international trade. Additionally, comprehensibility of hazard information will be enhanced as the GHS will: (1) Provide consistent information and definitions for hazardous chemicals; (2) address stakeholder concerns regarding the need for a standardized format for material safety data sheets; and (3) increase understanding by using standardized pictograms and harmonized hazard statements. Several nations, as well as the European Union, are preparing proposals for adoption of the GHS. US manufacturers, employers, and employees will be at a disadvantage in the event that our system of hazard communication is not compliant with the GHS. Summary of Legal Basis: The Occupational Safety and Health Act of 1970 authorizes the Secretary of Labor to set mandatory occupational safety and health standards to assure safe and healthful working conditions for working men and women (29 U.S.C. 651). Alternatives: The alternative to the proposed rulemaking would be to take no regulatory action. Anticipated Cost and Benefits: The estimates of the costs and benefits are still under development. Risks: OSHA's risk analysis is under development. Timetable:
Required: Undetermined Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC20 1838. NATIONALLY RECOGNIZED TESTING LABORATORIES FEE SCHEDULE - REVISED APPROACH Priority: Info./Admin./Other. Major status under 5 USC 801 is undetermined. Legal Authority: 31 USC 9701; 29 USC 653; 29 USC 655; 29 USC 657 CFR Citation: Not Yet Determined Legal Deadline: None Abstract: The Occupational Safety and Health Administration is proposing to adjust the fees that the Agency charges Nationally Recognized Testing Laboratories (NRTLs). A number of OSHA standards require that certain products and equipment used in the workplace be tested and certified by an organization that has been recognized by OSHA. OSHA requires NRTL applicants to provide detailed and comprehensive information about their programs, processes, and procedures in writing when they apply. OSHA reviews the written information and conducts an on-site assessment to determine whether the organization meets the requirements of 29 CFR 1910.7. OSHA uses a similar process when an NRTL applies for expansion or renewal of its recognition. In addition, the Agency conducts annual audits to ensure that the recognized laboratories maintain their programs and continue to meet the recognition requirements. In 2000, OSHA began charging NRTLs for the services it provides them. The services are processing of NRTL applications and audits of NRTL operations, and they define the fundamental functions of the NRTL Program. OSHA has determined that its current NRTL fee schedule does not recoup the full costs of the services performed because it does not recover certain indirect costs of those services. These indirect costs stem from attendant activities and accrue to the benefit of those services. OSHA's proposed fee schedule would account for these indirect costs. In determining the revised fee structure, OSHA will follow the guidelines established by the Office of Management and Budget in Circular Number A-25. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: None Agency Contact: Ruth McCully, Director, Directorate of Science, Technology, and Medicine, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., Room N3653, FP Building, Washington, DC 20210 Phone: 202 693-2300 Fax: 202 693-1644 Email: mccully.ruth@dol.gov RIN: 1218-AC27
1839. LONGSHORING AND MARINE TERMINALS (PARTS 1917 AND 1918) - REOPENING OF THE RECORD (VERTICAL TANDEM LIFTS (VTLS)) Priority: Substantive, Nonsignificant. Major status under 5 USC 801 is undetermined. Legal Authority: 29 USC 655(b); 33 USC 941 CFR Citation: 29 CFR 1918.11; 29 CFR 1918.85 Legal Deadline: None Abstract: OSHA issued a final rule on Longshoring on July 25, 1997 (62 FR 40142). However, in that rule, the Agency reserved provisions related to vertical tandem lifts. Vertical tandem lifts (VTLs) involve the lifting of two or more empty intermodal containers, secured together with twist locks, at the same time. OSHA has continued to work with national and international organizations to gather additional information on the safety of VTLs. The Agency has published an NPRM to address safety issues related to VTLs. The extended comment period concluded February 13, 2004, and an informal public hearing was held on July 29 to 30, 2004. The rulemaking record was open through November 30, 2004. Subsequently, new information was submitted to the docket. The Administrative Law Judge gave hearing participants 45 days to review this information and comment on it. Comments were due June 27, 2005. The Agency is analyzing the information and comments received to prepare the final action. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AA56 1840. ELECTRIC POWER TRANSMISSION AND DISTRIBUTION; ELECTRICAL PROTECTIVE EQUIPMENT Priority: Economically Significant. Major under 5 USC 801. Legal Authority: 29 USC 655(b); 40 USC 333 CFR Citation: 29 CFR 1910.136; 29 CFR 1910.137; 29 CFR 1910.269; 29 CFR 1926 subpart V; 29 CFR 1926.97 Legal Deadline: None Abstract: Electrical hazards are a major cause of occupational death in the United States. The annual fatality rate for power line workers is about 50 deaths per 100,000 employees. The construction industry standard addressing the safety of these workers during the construction of electric power transmission and distribution lines is over 30 years old. OSHA has developed a revision of this standard that will prevent many of these fatalities, add flexibility to the standard, and update and streamline the standard. OSHA also intends to amend the corresponding standard for general industry so that requirements for work performed during the maintenance of electric power transmission and distribution installations are the same as those for similar work in construction. In addition, OSHA will be revising a few requirements primarily affecting electric transmission and distribution work, including provisions on electrical protective equipment and foot protection. This rulemaking also addresses fall protection in aerial lifts for power generation, transmission and distribution work. OSHA published an NPRM on June 15, 2005. A public hearing was held March 6 to 14, 2006. Timetable:
Regulatory Flexibility Analysis Required: Yes Small Entities Affected: Businesses Government Levels Affected: Local Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB67 1841. EMPLOYER PAYMENT FOR PERSONAL PROTECTIVE EQUIPMENT Priority: Other Significant Legal Authority: 29 USC 655(b); 29 USC 657; 33 USC 941; 40 USC 333 CFR Citation: 29 CFR 1910.132; 29 CFR 1915.152; 29 CFR 1917.96; 29 CFR 1918.106; 29 CFR 1926.95 Legal Deadline: None Abstract: Generally, OSHA standards require that protective equipment (including personal protective equipment (PPE)) be provided and used when necessary to protect employees from hazards that can cause them injury, illness, or physical harm. In this discussion, OSHA uses the abbreviation PPE to cover both personal protective equipment and other protective equipment. In 1999, OSHA proposed to require employers to pay for PPE, with a few exceptions. The Agency continues to consider how to address this issue, and re-opened the record on July 8, 2004, to get input on issues related to PPE considered to be a "tool of the trade." The comment period ended August 23, 2004. Timetable:
Regulatory Flexibility Analysis Required: No Small Entities Affected: Businesses Government Levels Affected: Federal, Local, State Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693–1950 Fax: 202 693–1678 Email: dougherty.dorothy@dol.gov RIN: 1218–AB77 1842. PROCEDURES FOR HANDLING DISCRIMINATION COMPLAINTS UNDER FEDERAL EMPLOYEE PROTECTION STATUTES Priority: Other Significant Legal Authority: 42 USC 300j-9(i); 33 USC 1367; 15 USC 2622; 42 USC 6971; 42 USC 7622; 42 USC 9610; 42 USC 5851; CFR Citation: 29 CFR 24 Legal Deadline: None Abstract: Section 629, the employee protection provision of the Energy Policy Act of 2005 amended the Energy Reorganization Act of 1978, 42 U.S.C. section 5851. The amendments add Department of Energy and Nuclear Regulatory Commission employees to the employees covered under the Act, as are contractors and subcontractors of the Commission. In addition, Congress added a "kick-out" provision allowing the complainant to remove the complaint to District Court if the Secretary of Labor has not issued a final decision within a year of the filing of the complaint. These are significant changes to the ERA, necessitating immediate revision of the regulations, 29 CFR part 24, Procedures for the Handling of Discrimination Complaints under Federal Employee Protection Statutes, which governs whistleblower investigations under the Energy Reorganization Act of 1978 as well as under the six EPA statutes. Timetable:
Regulatory Flexibility Analysis Required: No Small Entities Affected: No Government Levels Affected: None Agency Contact: Nilgun Tolek, Director, Office of Investigative Assistance, Department of Labor, Occupational Safety and Health Administration, FP Building N3610, 200 Constitution Avenue NW., Washington, DC 20210 Phone: 202 693-2531 Fax: 202 693-2369 RIN: 1218-AC25
1843. WALKING WORKING SURFACES AND PERSONAL FALL PROTECTION SYSTEMS (1910) (SLIPS, TRIPS, AND FALL PREVENTION) Priority: Other Significant. Major status under 5 USC 801 is undetermined. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b) CFR Citation: 29 CFR 1910 subparts D and I Legal Deadline: None Abstract: In 1990, OSHA proposed a rule (55 FR 13360) addressing slip, trip, and fall hazards and establishing requirements for personal fall protection systems. Since that time, new technologies and procedures have become available to protect employees from these hazards. The Agency has been working to update these rules to reflect current technology. OSHA published a notice to re-open the rulemaking for comment on a number of issues raised in the record for the NPRM. As a result of the comments received on that notice, OSHA has determined that the rule proposed in 1990 is out-of-date and does not reflect current industry practice or technology. The Agency will develop a new proposal, modified to reflect current information, as well as re-assess the impact. Timetable:
Regulatory Flexibility Analysis Required: Undetermined Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB80 1844. HEARING CONSERVATION PROGRAM FOR CONSTRUCTION WORKERS Priority: Economically Significant. Major status under 5 USC 801 is undetermined. Unfunded Mandates: Undetermined Legal Authority: 29 USC 655(b); 40 USC 333 CFR Citation: 29 CFR 1926.52 Legal Deadline: None Abstract: OSHA issued a section 6(b)(5) health standard mandating a comprehensive hearing conservation program for noise-exposed workers in general industry in 1983. However, no rule was promulgated to cover workers in the construction industry. A number of recent studies have shown that many construction workers experience workrelated hearing loss. In addition, the use of engineering, administrative and personal protective equipment to reduce exposures to noise is not extensive in this industry. OSHA published an advance notice of proposed rulemaking to gather information on the extent of noiseinduced hearing loss among workers in different trades in this industry, current practices to reduce this loss, and additional approaches and protections that could be used to prevent such loss in the future. Work continues on collecting and analyzing information to determine technological and economic feasibility of possible approaches. Timetable:
Required: Undetermined Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB89
1845. REVISION AND UPDATE OF SUBPART S - ELECTRICAL STANDARDS Priority: Other Significant Legal Authority: 29 USC 655(b) CFR Citation: 29 CFR 1910 Legal Deadline: None Abstract: The Occupational Safety and Health Administration (OSHA) proposed to revise and update its 29 CFR 1910 subpart S - Electrical Standards. OSHA relied heavily on the National Fire Protection Association's (NFPA's) 70 E standard for Electrical Safety Requirements for Employee Workplaces. This revision will provide the first update of the General Industry - Electrical Standard since it was originally published in 1981. OSHA intends to complete this project in several stages. An NPRM was published on April 5, 2004. The first stage covers design safety standards for electrical systems, while the second stage will cover safety-related maintenance and work practice requirements and safety requirements for special equipment. It will thus allow the latest technological developments to be considered. Several of these state-of-the-art safety developments will be addressed by OSHA for the first time. OSHA has evaluated public comment received in response to the NPRM, and a final action is being prepared. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AB95 1846. EXCAVATIONS (SECTION 610 REVIEW) Priority: Substantive, Nonsignificant Legal Authority: 29 USC 651 et seq; 5 USC 610 CFR Citation: 29 CFR 1926.650 to 1926.652 Legal Deadline: None Abstract: OSHA has undertaken a review of the Agency's Excavations Standard (29 CFR 1926.650 to 1926.652) in accordance with the requirements of the Regulatory Flexibility Act and section 5 of Executive Order 12866. The review is considering the continued need for the rule, the impacts of the rule, public comments on the rule, the complexity of the rule, and whether the rule overlaps, duplicates, or conflicts with other regulations. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC02 1847. NFPA STANDARDS IN SHIPYARD FIRE PROTECTION Priority: Substantive, Nonsignificant Legal Authority: 29 USC 655(b); 29 USC 657 CFR Citation: 29 CFR 1915.4; 29 CFR 1915.505; 29 CFR 1915.507 Legal Deadline: None Abstract: In this rulemaking, OSHA is updating National Fire Protection Association (NFPA) standards incorporated by reference in the OSHA 29 CFR part 1915 subpart P fire protection standards. OSHA published a final rule for subpart P in 2004 that included nine NFPA standards that have been updated since the rule was proposed. OSHA plans to issue a direct final rulemaking, along with a notice of proposed rulemaking, to update the NFPA standards. Timetable:
Regulatory Flexibility Analysis Required: No Government Levels Affected: None Agency Contact: Dorothy Dougherty, Director, Directorate of Standards and Guidance, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., FP Building, Room N 3718, Washington, DC 20210 Phone: 202 693-1950 Fax: 202 693-1678 Email: dougherty.dorothy@dol.gov RIN: 1218-AC16 1848. NOTICE ON SUPPLIER'S DECLARATION OF CONFORMITY (SDOC) Priority: Info./Admin./Other Legal Authority: 29 USC 655(b) CFR Citation: 29 CFR 1910 Legal Deadline: None Abstract: OSHA requested information and comments on a specific proposal submitted to OSHA to permit the use of a Supplier's Declaration of Conformity (SDoC) as part of, or as an alternative to, the Nationally Recognized Testing Laboratories (NRTLs) product approval process. NTRLs are third-party (i.e., independent) organizations, and many of OSHA's workplace standards require that certain types of equipment be approved by an NRTL. Under SDoC, manufacturers self-approve their products. Based upon the review and analysis of the information gathered during the RFI process, OSHA has confirmed that its third-party approval requirements are effective in safeguarding product safety in the workplace. OSHA has decided to take no further action on the proposal and to withdraw this agenda item from the Regulatory Agenda. Timetable:
Regulatory Flexibility Analysis Required: No Small Entities Affected: No Government Levels Affected: None Agency Contact: Ruth McCully, Director, Directorate of Science, Technology, and Medicine, Department of Labor, Occupational Safety and Health Administration, 200 Constitution Avenue NW., Room N3653, FP Building, Washington, DC 20210 Phone: 202 693-2300 Fax: 202 693-1644 Email: mccully.ruth@dol.gov RIN: 1218-AC21 |
![]() |
![]() |
www.osha.gov | www.dol.gov |
Contact Us | Freedom of Information Act | Customer Survey Privacy and Security Statement | Disclaimers |
||
Occupational Safety & Health Administration 200 Constitution Avenue, NW Washington, DC 20210 |