Criticality Safety
Nuclear Safety Basis
The Office of Nuclear and Facility Safety establishes and maintains the DOE requirements
for nuclear criticality safety. The DOE detailed requirements
for criticality safety are contained in Section 4.3 of
the DOE Order 420.1, Facility Safety. Criticality safety
requirements are based on the documented safety analysis
required by 10 CFR 830, Subpart B. Additionally, guidance
for satisfying the DOE requirements is found in the Implementation
Guide for the 830 rule and in DOE Standard 3009-94, chapter
six. DOE-G-421-1 also provides detailed program guidance
to criticality practitioners and reviewers.
Criticality Safety Contacts: Dick Englehart or Burt Rothleder
Links:
The following orders, policies, and guides may be found at The Department of Energy's Directives Web Site.
- DOE Order 420.1A, Facility Safety
- DOE G 421.1-2; DOE G 423.1-1; DOE G 424.1-1, Implementation Guides for 10 CFR 830
- DOE-G-421.1-1, DOE Good Practices Guide
The following technical standards may be found at The Department of Energy's Technical Standards Web Site.
- DOE STD 3009-94, Preparation Guide for US DOE Nonreactor Nuclear Facility Safety Analysis Reports
- DOE-STD-3007-93, Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities
- DOE-STD-1135-99, Guidance for Nuclear Criticality Safety Engineer Training and Qualification
This page was last updated on March 11, 2009
|
|