Abstract

This design manual is an in-depth presentation of the steps required to design and operate a water treatment plant for removal of excess arsenic from drinking water using the adsorptive media process. This treatment process is very reliable, simple, and cost effective. Several adsorptive media products currently on the market have successfully demonstrated their capability to remove arsenic from drinking water to levels well below the revised maximum contaminant level of 0.010 milligrams per liter. Other new products continue to be developed. The adsorptive media products are preferred for the removal of arsenic over other competing ions. Therefore, unless a water system requires treatment capability for removal of other suspended or dissolved contaminants, the adsorptive media treatment method merits evaluation.

The adsorptive media process is implemented with operational options that vary with the product selected. For water systems that are primarily concerned with financial feasibility, and capital and operating costs, each operational option should be evaluated along with each available adsorptive media product. This design manual provides the methods for competently performing each evaluation.

The arsenic removal capacity of some adsorptive media products, such as activated alumina, are very sensitive to the pH of the water passing through treatment. Others, such as iron-based products, are not. Treatment processes incorporating pH adjustment capability require careful handling and storage of corrosive chemicals.

Some adsorptive media products, such as activated alumina, are capable of being chemically regenerated for repetition of treatment cycles using the same corrosive chemicals as those used for pH adjustment in the treatment process. Regeneration is not recommended for other adsorptive media products. Whether or not the pH of water being treated is adjusted, the adsorptive media can be replaced upon exhaustion of arsenic capacity.

This design manual presents the information necessary to design and operate treatment systems for any combination of operational options and for any adsorptive media. It also discusses the capital and operating costs, including the many variables that can raise or lower costs for identical treatment systems.

Contact

Thomas Sorg

See Also

Arsenic Research

You will need Adobe Reader to view some of the files on this page.
See EPA's PDF page to learn more.