January 16, 1998 SEDDISCH - Version 1.2 1998/01/16 DISDATA - Version 1.3 1998/01/16 Computation of fluvial sediment discharge For assistance, enhancement requests, or bug reports contact the Hydrologic Analysis Software Support Team via email at h2osoft@usgs.gov. See the file doc/seddisch.txt for descriptions, references, and additional contacts for this software. Instructions for installation, execution, and testing are provided below. TABLE OF CONTENTS A. DISTRIBUTION PACKAGES B. EXTRACTING FILES C. COMPILING D. INSTALLING E. RUNNING THE SOFTWARE F. TESTING A. DISTRIBUTION PACKAGES SEDDISCH is distributed as a package that contains the computation program (seddisch) software, the input data processor program (disdata), data sets, and information files. The software is available either uncompiled (source code), or compiled for one of two operating systems (contains the executable files, but not the source code). The following distribution packages are currently available for UNIX systems: seddisch.1_2.DGUX.tar.gz - Compiled for Data General AViiON under DG/UX 5.4 seddisch.1_2.Solaris.tar.gz - Compiled for Sun UltraSPARC 2 under Solaris 2.5 seddisch.1_2.source.tar.gz - Source code B. EXTRACTING FILES The compressed tar file, named seddisch.1_2.OS.tar.gz, contains all the files needed to install and test SEDDISCH on a computer with a particular operating system, where OS is a string indicating the operating system the distribution is intended for. For either type of distribution, the directory seddisch.1_2 is created (or overwritten) when the files are extracted from the tar file. If the seddisch.1_2 directory already exists, you may want to delete or rename it before extracting the files. The following are the steps to extract the files from a distribution tar file. 1. If the tar file is not already in the directory under which you want the distribution installed, move it there. For example: mv seddisch.1_2.____.tar.gz /usr/opt/wrdapp 2. If you are not in the directory where the tar file is located, go there. For example: cd /usr/opt/wrdapp 3. Uncompress the distribution file. For example: gunzip seddisch.1_2.____.tar.gz 4. Extract the distribution files from the tar file. For example: tar -xpof seddisch.1_2.___.tar This creates the following directory structure (the contents of each directory are shown to the right): seddisch.1_2 ; copy of this README file `-----bin ; compiled executable `-----doc ; documentation files `-----src ; Makefile `-----test ; scripts to run verification tests `-----data ; standard data sets used in verification tests Notes: a) The bin directory is not included in the seddisch.1_2.source.tar.gz distribution (it is created during compilation). b) Source code is included only with the seddisch.1_2.source.tar.gz distribution. c) It is recommended that no user files are kept in the seddisch.1_2 directory structure. If you do plan to put files in the seddisch.1_2 directory structure, do so only by creating subdirectories of seddisch.1_2. C. COMPILING If a compiled version of the software is not available for your computer, or if you want to build the executables yourself, follow the instructions in this section. If you have retrieved a pre-compiled distribution of the software, skip to the Installing section below. The source code is provided in the seddisch.1_2.source.tar.gz distribution so that users can generate the executables themselves. No support can be provided for users generating their own versions of the software. In general, the requirements are a Fortran compiler, and a minimal level of knowledge of the compiler and the UNIX operating system. As provided, the Makefile and source code are set up for use on Data General AViiON workstations running the DG/UX operating system. To generate new executables, do the following: 1. Change directory to the source directory: cd seddisch.1_2/src 2. Modify the beginning of the file named Makefile to correctly specify system-dependent variables: F77 Fortran compiler name FFLAGS Fortran compiler flags 3. Use the make program to initiate compilation of the source code and installation of the software: make [BINDIR=directory_for_links] See the Installing instructions below for an explanation of BINDIR. The make will: a. create the directories seddisch.1_2/bin and BINDIR if they do not already exist, b. compile the source code, c. place the executables (seddisch and disdata) in seddisch.1_2/bin, and d. place links to the executables in BINDIR if specified. D. INSTALLING To make the executables (seddisch and disdata) easy to use, they should be installed in a directory included in the user's search path. The Makefile (input instructions to the UNIX make program--located in seddisch.1_2/src) contains instructions to optionally place a link in a specified directory to the executables contained in seddisch.1_2/bin. Use the following two commands to do this: cd seddisch.1_2/src make install [BINDIR=directory_for_links] If BINDIR is specified, a link to the executable is placed in the specified directory. For example, if your search path consists of: /usr/bin:/usr/opt/bin:/usr/local/bin use the command: make install BINDIR=/usr/local/bin to make the executable accessible from any directory without requiring the full pathname of the software's location. Notes: a) Brackets "[xxx]" are used to indicate optional arguments to commands. b) To create and delete a link to the SEDDISCH executable file, the installer must have sufficient rights in the directory that BINDIR is set to. E. RUNNING THE SOFTWARE After SEDDISCH is properly installed in a directory that is included in your PATH, the program is initiated using the command: seddisch. SEDDISCH prompts for the input data file name (default name=DISDATA.INP) and then for the output file name. The input data file is a direct-access file that must be created using the mepdata program. DISDATA prompts in a conversational fashion for all required data. F. TESTING Test data sets are provided to verify that the program is correctly installed and running on the system. The tests may also be looked at as examples of how to use the program. The directory "seddisch.1_2/test" contains the scripts to run the tests. The directory "seddisch.1_2/data" contains the input data and expected results for each test. Tests are usually run in the directory "seddisch.1_2/test", but they can be run in any user directory if the installation procedure was completed (make install performed). Run the tests using any of the commands in the table below. To test the installation, change to the seddisch.1_2/test directory and type the command: ./test.sh [m [n]] If running from another directory, specify the full path to the script; for example: /usr/opt/wrdapp/seddisch.1_2/test/test.sh [m [n]] where: m = the number of the first test to perform, default=1 n = the number of the last test to perform, default=4 For example: command what happens ------------------ ------------------------------------ ./test.sh runs all of the tests ./test.sh n runs test 'n' through the last test ./test.sh n m runs test 'n' through 'm' After the tests are completed, the results are compared to the expected results. If all goes well, the only differences will be due to different processing times or pathnames. To clean up after the tests, type the command: ./clean.sh NOTE: the standard data sets were created on a Data General AViiON workstation. You may notice slight numeric differences in the results on other computers. These are generally due to different round-off algorithms and the different architecture of the central processing unit chip. The tests are described in the table below. Test is the test number, program is the program used to run the test, and the usage column indicates how a file is used, with i for input, o for output, and i/o for both input and output. test program description of test and files file name & usage ---- ------- --------------------------------- ----------------- 1 seddisch Rio Grande River near Bernalillo, NM disdata DISDATA input data disdata1.dat i DISDATA output file disdata1.out i/o SEDDISCH ouptut file sedisch1.out o 2 seddisch Rio Grande River near Bernalillo, NM DISDATA output file disdata1.out i/o SEDDISCH ouptut file sedisch2.out o 3 seddisch Niobrara River near Cody, NE disdata DISDATA input data disdata3.dat i DISDATA output file disdata3.out i/o SEDDISCH ouptut file sedisch3.out o * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Good Luck! * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *