|
![]() |
|
![]() |
Authority:
Secs. 301, 304(b) and (c), 306(b), 307(b) and (c), Federal Water Pollution Control Act, as amended (33 U.S.C. 1251, 1311, 1314(b) and (c), 1316(b) and 1317(b) and (c), 86 Stat. 816 et. seq.; Pub. L. 92–500) (the Act). Source:
41 FR 20511, May 18, 1976, unless otherwise noted. The provisions of this subpart are applicable to discharges resulting from the production of char and charcoal briquets. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in part 401 of this chapter shall apply to this subpart. (b) The term “product” shall mean char and charcoal briquets. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of char and charcoal briquets by a point source subject to the provisions of this paragraph after application of the best practicable control technology currently available: There shall be no discharge of process wastewater pollutants to navigable waters. [41 FR 20511, May 18, 1976, as amended at 60 FR 33970, June 29, 1995] The provisions of this subpart are applicable to discharges resulting from the manufacture of gum rosin and turpentine. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean gum rosin and turpentine. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of gum rosin and turpentine by a point source subject to the provisions of this paragraph after application of the best practicable control technology currently available: [Metric units, kg/kkg of product; English units, lb/1,000 lb of product] 1Within the range 6.0 to 9.0. [41 FR 20511, May 18, 1976, as amended at 60 FR 33970, June 29, 1995] The provisions of this subpart are applicable to discharges resulting from the manufacture of wood rosin, turpentine and pine oil subcategory. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean products from wood rosin, turpentine and pine oil. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of wood rosin, turpentine and pine oil by a point source subject to the provisions of this paragraph after application of the best practicable control technology currently available: [Metric units, kg/kkg of product; English units, lb/1,000 lb of product] 1Within the range 6.0 to 9.0. [41 FR 20511, May 18, 1976, as amended at 60 FR 33970, June 29, 1995] The provisions of this subpart are applicable to discharges resulting from the manufacture of tall oil rosin, pitch and fatty acids. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean tall oil rosin, pitch and fatty acids. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of tall oil rosin, pitch and fatty acids by a point source subject to the provisions of this paragraph after application of the best practicable control technology currently available: [Metric units, kg/kkg of product; English units, lb/1,000 lb of product] 1Within the range 6.0 to 9.0. [41 FR 20511, May 18, 1976, as amended at 60 FR 33971, June 29, 1995] The provisions of this subpart are applicable to discharges resulting from the manufacture of essential oils. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean essential oils. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of essential oils by a point source subject to the provisions of this paragraph after application of the best practicable control technology currently available: [Metric units, kg/kkg of product; English units, lb/1,000 lb of product] 1Within the range 6.0 to 9.0. [41 FR 20511, May 18, 1976, as amended at 60 FR 33971, June 29, 1995] The provisions of this subpart are applicable to discharges resulting from the manufacture of rosin-based derivatives. For the purpose of this subpart: (a) Except as provided below, the general definitions, abbreviations and methods of analysis set forth in 40 CFR part 401 shall apply to this subpart. (b) The term “product” shall mean rosin-based derivatives. Except as provided in §§125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of rosin-based derivatives by a point source subject to the provisions of this paragraph after application of the best practicable control technology currently available: [Metric units, kg/kkg of product; English units, lb/1,000 lb of product] 1Within the range 6.0 to 9.0. [41 FR 20511, May 18, 1976, as amended at 60 FR 33971, June 29, 1995] August 1, 2007 -->
|