The FFIEC CRA Aggregate Reports web site was
developed to provide electronic access to CRA Aggregate Reports produced from
composite information submitted to the FFIEC. This web site is an example of
the FFIEC's continuing effort to reduce paper and use electronic means wherever
possible to provide information to the public.
Follow the steps listed below for instructions on how to retrieve a report.
1) From the main screen, to retrieve a report for an entire MSA or non-MSA
area, select "ALL" from the state list by single clicking on "ALL" (default
selection) OR to retrieve a report for a particular state's portion of an MSA
or non-MSA area, select the specific state by single clicking on the desired
state. Most MSAs and all non-MSAs reside in one state.
2) Single click on the "Retrieve by MSA" button.
3) The MSA and non-MSA areas displayed on the list will be filtered based
on the state selection. Therefore, if you selected a specific state, you will
only see the MSA and non-MSA areas located in that state. If you selected
"ALL" for your state selection, you will see all MSAs listed as well
as all the non-MSA portions of each state (these are located at the bottom of
the list).
Select the specific MSA or non-MSA area by single clicking on the desired MSA
or non-MSA area.
4) Click on the down arrow next to Table to get a list of aggregate tables.
Select the table you want to view by single clicking on the desired table.
5) Once you have selected the MSA and table, single click on the "Retrieve
Report" button.
Note: If you selected a specific state and decide you would like to view
the report at the county level, you may click on the "Get County List" button
to view the counties in the selected MSA. The counties displayed on the list
will be filtered based on your state/MSA selections. Single click on the
desired county and then click on the "Retrieve Report" button.
6) You will be taken into the Report screen with the selected report
displayed.
Use the navigation choices on the left-hand side of the screen to move around
the site. See Report Screen Navigation Choices for more information about these
items.
Follow the steps listed below for instructions on how to retrieve a report.
1) From the main screen, select the state that the county is located in by
single clicking on the state.
2) Single click on the "Retrieve by County" button.
3) The counties displayed on the list will be filtered based on the state
selection. Select the county you want the report to reflect by single clicking
on the desired county.
4) Click on the down arrow next to Table to get a list of aggregate tables.
Select the table you want to view by single clicking on the desired table.
5) Once you have selected the county and table, single click on the
"Retrieve Report" button.
Note: If the county you selected is a split county, the system will make
you select which MSA you want to view in the report. Select the desired MSA and
then click on the "Retrieve Report" button. Most counties are entirely within
one MSA or non-MSA area; however, there are 33 counties in New England that are
split either between MSAs or between MSA and non-MSA areas. These counties are
split into as many as four MSA/non-MSA areas.
6) You will be taken into the Report screen with the selected report
displayed.
Use the navigation choices on the left-hand side of the screen to move around
the site. See Report Screen Navigation Choices for more information about these
items.
The report screen is divided into two parts:
Report Display and Navigation Choices. The report display area (on the
right-hand side of the screen) is where the selected report will be viewed. A
scroll bar is available to page through the document. The navigation choices
area (on the left-hand side of the screen) allows you to navigate around the
web site. Detailed functions of each item are listed below:
Back to Main- Takes you to the FFIEC web site
Back to CRA Aggregate- Takes you to the main screen of the CRA
Aggregate Reports web site
Disclaimer- Displays the disclaimer for the CRA Aggregate
Reports web site
Next Table X-X- Displays the next table available for the
current selection criteria. For example, if you are viewing table 1-1, the next
table available would be table 1-2.
Table Notes- Displays the footnotes for the CRA Aggregate
Reports.
Aggr Info Sheet- Displays general information about the CRA
Aggregate Reports.
Follow the steps listed below for instructions on how to retrieve a report.
1) From the main screen, select "ALL" from the state list by single
clicking on "ALL" (default selection).
2) Single click on the "Retrieve by MSA" button.
3) Select the specific MSA by single clicking on the desired MSA.
4) Click on the drop down arrow next to Table to get a list of aggregate
tables. Select the table you want to view by single clicking on the desired
table.
5) Once you have selected the MSA and table, single click on the "Retrieve
Report" button.
6) You will be taken into the Report screen with the selected report
displayed.
Use the navigation choices on the left-hand side of the screen to move around
the site. See Report Screen Navigation Choices for more information about these
items.
How Do I Retrieve a Report for the non-MSA portion of a
state?
Follow the steps listed below for instructions on how to retrieve a report.
1) From the main screen, select the state for which you want to see the
non-MSA area.
2) Single click on the "Retrieve by MSA" button.
3) Select the non-MSA area from the MSA list (located at the bottom of the
list) by single clicking on the non-MSA area.
4) Click on the drop down arrow next to Table to get a list of aggregate
tables. Select the table you want to view by single clicking on the desired
table.
5) Once you have selected the non-MSA area and table, single click on the
"Retrieve Report" button.
6) You will be taken into the Report screen with the selected report
displayed.
Use the navigation choices on the left-hand side of the screen to move around
the site. See Report Screen Navigation Choices for more information about these
items.
Follow the steps listed below for instructions on how to retrieve a report.
1) From the main screen, select the state that the county is located in by
single clicking on the state.
2) Single click on the "Retrieve by County" button.
3) The counties displayed on the list will be filtered based on the state
selection. Select the county you want the report to reflect by single clicking
on the desired county.
4) Click on the down arrow next to Table to get a list of aggregate tables.
Select the table you want to view by single clicking on the desired table.
5) Once you have selected the county and table, single click on the
"Retrieve Report" button.
Note: If the county you selected is a split county, the system will make
you select which MSA you want to view in the report. Select the desired MSA and
then click on the "Retrieve Report" button. Most counties are entirely within
one MSA or non-MSA area; however, there are 33 counties in New England that are
split either between MSAs or between MSA and non-MSA areas. These counties are
split into as many as four MSA/non-MSA areas.
6) You will be taken into the Report screen with the selected report
displayed.
Use the navigation choices on the left-hand side of the screen to move around
the site. See Report Screen Navigation Choices for more information about these
items.
How Do I Retrieve a Report for a specific state's portion of
an MSA?
Follow the steps listed below for instructions on how to retrieve a report.
1) From the main screen, select the specific state by single clicking on
the desired state.
2) Single click on the "Retrieve by MSA" button.
3) The MSAs displayed on the list will be filtered based on the state
selection. Select the specific MSA by single clicking on the desired MSA.
4) Click on the drop down arrow next to Table to get a list of aggregate
tables. Select the table you want to view by single clicking on the desired
table.
5) Once you have selected the MSA and table, single click on the "Retrieve
Report" button.
6) You will be taken into the Report screen with the selected report
displayed.
Use the navigation choices on the left-hand side of the screen to move around
the site. See Report Screen Navigation Choices for more information about these
items.