|
|
Class Numbers & Titles | Class Numbers Only | USPC Index | International | HELP |
You are viewing a USPC Schedule. |
Class 29 | METAL WORKING |
Click here for a printable version of this file |
2 | BATTERY-GRID MAKING |
2.1 | BIAS (I.E., HELICALLY) CUTTING OF TUBULAR STOCK |
2.11 | Including orbital cutter |
2.14 | Including means to inflate stock |
2.15 | With means to feed stock along support or mandrel |
2.2 | With means to rotate and store stock supply |
2.22 | With means for arcuate shift of mandrel |
2.23 | Including means to handle produced strip or web |
2.25 | Method |
3 | BUCKLE MAKING |
4 | BUTTON-FASTENER MAKING |
4.51 | SHREDDING METAL OR METAL WOOL ARTICLE MAKING |
4.6 | CORD HEDDLE MAKING |
5 | COTTER-PIN MAKING |
6.01 | CRANKSHAFT MAKING APPARATUS |
6.1 | EXPANDED METAL MAKING |
7 | EYEBOLT OR HOOK MAKING |
7.1 | FENCE BARB MAKING |
8 | FINGER-RING FORMING OR SIZING |
9 | FISHHOOK MAKING |
10 | GEM AND JEWEL SETTING |
11 | HINGE MAKING OR ASSEMBLING |
12 | LACING-STUD MAKING |
13 | PAPER-FASTENER MAKING |
14 | PLOW OR CULTIVATOR IRON MAKING |
15 | PUDDLERS` BALLS MAKING |
16 | RAILWAY-CHAIR MAKING |
17.1 | FOIL OR OTHER THIN SHEET-METAL MAKING OR TREATING |
17.2 | Method |
17.3 | Clad or other composite foil or thin metal making |
17.4 | With assembling or disassembling of a pack |
17.5 | Using transitory solid cover material |
17.6 | Including bond prevention treatment |
17.7 | Disassembling of a pack |
17.8 | By shaving or longitudinal cutting |
17.9 | Using transitory material |
18.1 | Means for opening or separating a pack |
20 | SPECTACLE-FRAME MAKING |
20.1 | SPIRAL CUTTING OF FLAT STOCK |
21 | STEREOTYPE-PLATE FINISHING |
21.1 | MEANS FOR FORMING CLENCH-TONGUE (E.G., FOR TIEBAND) |
22 | TIRE UPSETTING, WITH CUTTING, PUNCHING, ETC. |
23.1 | TOOTHED-CYLINDER MAKING APPARATUS (E.G., TEXTURE WORKING CYLINDER) |
23.51 | IMPELLER MAKING APPARATUS |
24 | TYPE FINISHING AND GROOVING |
24.5 | VENETIAN BLIND ASSEMBLING |
25 | UMBRELLA-FRAME MAKING |
25.01 | BARRIER LAYER OR SEMICONDUCTOR DEVICE MAKING |
25.35 | PIEZOELECTRIC DEVICE MAKING |
25.41 | ELECTRIC CONDENSER MAKING |
76.1 | FILING |
81.01 | SCALE REMOVER OR PREVENTOR |
81.02 | For hollow workpiece |
81.03 | Rolling deformation or deflection |
81.05 | With rotary head |
81.06 | Fluid impingement |
81.1 | Chainer |
81.11 | Scraper or scalper |
81.12 | Brush type |
81.13 | Mechanically powered operator |
81.17 | Hand tool |
89.5 | BURNING IN, WEARING IN, OR OIL BURNISHING |
90.01 | BURNISHING |
90.1 | Of water laid fibrous article (e.g., paper) |
90.5 | Continuous feed |
90.6 | Of gear article |
90.7 | By shot peening or blasting |
91 | UPHOLSTERED ARTICLE MAKING |
592 | METHOD OF MECHANICAL MANUFACTURE |
592.1 | Electrical device making |
593 | Including measuring or testing of device or component part |
594 | Acoustic transducer |
595 | Indicating transducer |
596 | Dynamoelectric machine |
599 | Superconductor |
600 | Antenna or wave energy "plumbing" making |
602.1 | Electromagnet, transformer or inductor |
603.01 | Magnetic recording reproducing transducer (e.g., tape head, core, etc.) |
603.02 | Including dissassembly step |
603.03 | Making disc drive |
603.04 | Mounting preformed head/core onto other structure |
603.07 | Fabricating head structure or component thereof |
603.08 | Treating to affect magnetic properties |
603.09 | Including measuring or testing |
603.1 | Using reference point/surface to facilitate measuring |
603.11 | With dual gap materials |
603.12 | With significant slider/housing shaping or treating |
603.13 | Depositing magnetic layer or coating |
603.16 | Machining magnetic material (e.g., grinding, etching, polishing) |
603.19 | Multitrack heads having integral holding means |
603.2 | With bond/laminating preformed parts, at least two magnetic |
603.23 | Providing winding |
603.27 | Specified diverse magnetic materials |
604 | Data storage inductor or core |
605 | By winding or coiling |
606 | By assembling coil and core |
607 | Including permanent magnet or core |
609.1 | Acoustic transducer |
610.1 | Resistor making |
611 | Heater type |
612 | Thermally variable |
613 | With envelope or housing |
614 | Filling with powdered insulation |
616 | Powdering the insulation |
618 | With winding |
619 | Applying terminal |
620 | Coating resistive material on a base |
621 | Applying terminal |
621.1 | Strain gauge making |
622 | Switch making |
623 | Fuse making |
623.1 | Electric battery cell making |
623.2 | Including sealing |
623.3 | Including laminating of indefinite length material |
623.4 | Including adhesively bonding |
623.5 | Including coating or impregnating |
825 | Conductor or circuit manufacturing |
826 | Brush |
827 | Beam lead frame or beam lead device |
828 | Co-axial cable |
829 | On flat or curved insulated base, e.g., printed circuit, etc. |
830 | Assembling bases |
831 | Assembling formed circuit to base |
832 | Assembling to base an electrical component, e.g., capacitor, etc. |
833 | By utilizing optical sighting device |
834 | With component orienting |
837 | By inserting component lead or terminal into base aperture |
840 | By metal fusion |
841 | With encapsulating, e.g., potting, etc. |
842 | Assembling terminal to base |
846 | Manufacturing circuit on or in base |
854 | Assembling electrical component directly to terminal or elongated conductor |
857 | Assembling terminal to elongated conductor |
868 | Assembling elongated conductors, e.g., splicing, etc. |
874 | Contact or terminal manufacturing |
886 | Electret making |
887 | Insulator making |
888 | Prime mover or fluid pump making |
888.01 | I.C. (internal combustion) engine making |
888.02 | Fluid pump or compressor making |
888.021 | Repairing, converting, servicing or salvaging |
888.022 | Scroll or peristaltic type |
888.023 | Screw or gear type, e.g., Moineau type |
888.024 | Centrifugal type |
888.025 | Vane type or other rotary, e.g., fan |
888.03 | Valve lifter making |
888.04 | Piston making |
888.041 | Repairing, converting, servicing or salvaging |
888.042 | Multi-element piston making |
888.044 | With assembly or composite article making |
888.045 | With thermal barrier or heat flow provision |
888.046 | With fiber reinforced structure |
888.047 | By composite casting or molding |
888.048 | By coating or cladding |
888.049 | Ring groove forming or finishing |
888.05 | Gudgeon pin, wrist pin, piston pin, or boss therefor |
888.051 | With other attaching provision for connecting rod |
888.06 | Cylinder, cylinder head or engine valve sleeve making |
888.07 | Piston ring or piston packing making |
888.071 | Including forging or hammering |
888.072 | Including casting or molding |
888.073 | Including rolling or die forming, e.g., drawing, punching |
888.074 | Including coating or plating |
888.075 | Including grinding or honing |
888.076 | Including machining or angular cutting |
888.08 | Crankshaft making |
888.09 | Connecting rod making |
888.1 | Camshaft making |
888.2 | Push rod or rocker arm making |
888.3 | Seal or packing making |
888.4 | Poppet or I.C. engine valve or valve seat making |
889 | Impeller making |
889.1 | Repairing or disassembling |
889.2 | Turbomachine making |
889.21 | Assembling individual fluid flow interacting members, e.g., blades, vanes, buckets, on rotary support member |
889.22 | Assembling fluid flow directing devices, e.g., stators, diaphragms, nozzles |
889.23 | Shaping integrally bladed rotor |
889.3 | Axial blower or fan |
889.4 | Centrifugal blower or fan |
889.5 | Fluid coupling device |
889.6 | Propeller making |
889.7 | Blade making |
890 | Catalytic device making |
890.01 | Rocket or jet device making |
890.02 | Burner, torch or metallurgical lance making |
890.03 | Heat exchanger or boiler making |
890.031 | Repairing, converting, servicing or salvaging |
890.032 | Heat pipe device making |
890.033 | Solar energy device making |
890.034 | Regenerator or recuperator making |
890.035 | Cooling apparatus making, e.g., air conditioner, refrigerator |
890.036 | Tube inside tube |
890.037 | Tube wound about tube |
890.038 | Tube joined to flat sheet longitudinally, i.e., tube sheet |
890.039 | Sheet joined to sheet |
890.043 | Tube joint and tube plate structure |
890.045 | Tube with heat transfer means |
890.051 | Boiler making |
890.052 | Header or manifold making |
890.053 | Tube making or reforming |
890.054 | With metallurgical bonding |
890.06 | Accumulator making |
890.07 | Condenser, evaporator or vaporizer making |
890.08 | Muffler, manifold or exhaust pipe making |
890.09 | Fluidic or fluid actuated device making |
890.1 | Fluid pattern dispersing device making, e.g., ink jet |
890.11 | Tapping device making |
890.12 | Valve or choke making |
890.121 | Repairing, converting, servicing or salvaging |
890.122 | Valve seat forming |
890.123 | Valve stem or tire valve making |
890.124 | With assembly, disassembly or composite article making |
890.125 | Joining plural semi-circular components |
890.126 | With material shaping or cutting |
890.127 | Including molding or casting |
890.128 | Including machining or drilling |
890.129 | Including metallurgical bonding |
890.13 | Including metal deforming |
890.131 | Including metallurgical bonding |
890.132 | Including metal shaping and diverse operation |
890.14 | Gas and water specific plumbing component making |
890.141 | Plumbing fixture making |
890.142 | Nozzle making |
890.144 | Flexible conduit or fitting therefor |
890.145 | Flue connector device making |
890.146 | Trap making |
890.147 | Return connector device making |
890.148 | T-shaped fitting making |
890.149 | Elbow or L-shaped fitting making |
890.15 | Ferrule making or reforming |
891 | Agricultural device making |
892 | Pulley making |
892.1 | Assembly |
892.2 | Disc splitting to form pulley rim groove |
892.3 | Groove forming in sheet metal pulley rim |
893 | Gear making |
894 | Wheel making |
894.01 | Railway or trolley wheel making |
894.1 | Steering wheel |
894.2 | Material winding, e.g., reel, spool |
894.3 | Land wheel |
894.31 | Assembling tire to wheel body |
894.32 | Disc type wheel |
894.321 | Assembling wheel disc to rim and hub |
894.322 | Assembling wheel disc to rim |
894.324 | Integral rim and disc making |
894.325 | Disc shaping |
894.33 | Tensioned spoke type wheel making |
894.331 | Tensioning all spokes simultaneously |
894.332 | Tensioning spokes in series |
894.333 | Tensioning spokes individually |
894.34 | Compression, e.g., nontension, spoke type wheel making |
894.341 | Joining spokes to rim and hub |
894.342 | Joining spokes to rim |
894.343 | Joining spokes to hub |
894.344 | Making plural spokes from a single blank |
894.345 | Individual spoke making |
894.35 | Rim making |
894.36 | Hub making |
894.37 | Tire making |
894.38 | Wheel trim making, e.g., wheel cover, hubcap |
895 | Roller making |
895.1 | Repairing or servicing |
895.2 | Assembling preformed components |
895.21 | Work contacting surface element assembled to core |
895.211 | Work contacting surface wound about core |
895.212 | With prestressing of component by heat differential, e.g., shrink, fit |
895.213 | Work contacting surface having annular axial sections |
895.22 | Work contacting surface element assembled to end support members |
895.23 | Includes securing removable cover on roller |
895.3 | Fabricating and shaping roller work contacting surface element |
895.33 | One-piece roller making |
896.1 | Dental appliance making |
896.2 | Sound device making |
896.21 | Hearing aid component making |
896.22 | Musical instrument or tuning fork making |
896.23 | Including diaphragm or support therefor |
896.24 | Phonograph component making |
896.3 | Watch or clock making |
896.31 | Having arbor, pinion, or balance |
896.32 | Having indicia, face, or dial |
896.33 | Having case, cover, or back |
896.34 | Having crown, stem, or pendent |
896.4 | Jewelry or locket making |
896.41 | Human adornment device making |
896.42 | Latch, clasp, or fastener component making |
896.43 | Ornamental stock making |
896.5 | Knob or knob shank making |
896.6 | Multiperforated metal article making |
896.7 | Turnbuckle making |
896.8 | Spring-head clip making |
896.9 | Spring making |
896.91 | For vehicle or clutch |
896.92 | For human comfort |
896.93 | Resilient shock or vibration absorber utility |
897 | Structural member making |
897.1 | Restoring existing member, e.g., reinforcing, repairing |
897.15 | Grille making |
897.2 | Vehicular structural member making |
897.3 | Static structure, e.g., a building component |
898 | Process for making bearing or component thereof |
898.01 | Repairing |
898.02 | Fluid bearing |
898.03 | Linear bearing |
898.04 | Rotary bearing |
898.041 | Thrust bearing |
898.042 | Plain bearing |
898.043 | Self-adjusting or self-aligning, including ball and socket type, bearing and component making |
898.044 | Deforming socket to secure ball |
898.047 | Having liner |
898.048 | Socket making |
898.052 | Ball making |
898.054 | Sleeve or bushing making |
898.06 | Anti-friction bearing or component thereof |
898.07 | Mounting |
898.08 | Demounting |
898.09 | Pre-usage process, e.g., preloading, aligning |
898.1 | Lubricating |
898.11 | Sealing |
898.12 | Coating or casting |
898.13 | Bearing surface treatment |
898.14 | Specific metallic composition |
898.15 | Nonmetallic bearing element |
899 | Ball making |
401.1 | Converting |
402.01 | Repairing |
402.02 | Seal or element thereof |
402.03 | With disassembling |
402.09 | By attaching repair preform, e.g., remaking, restoring, or patching |
402.11 | And removing damaged material |
402.12 | Mechanically attaching preform with separate fastener |
402.13 | Metallurgically attaching preform |
402.14 | Mechanically attaching preform by separate fastener |
402.16 | Metallurgically attaching preform |
402.17 | Screw threaded preform |
402.18 | By applying fluent material, e.g., coating, casting |
402.19 | By shaping, e.g., bending, extruding, turning, etc. |
403.1 | Scrap recovering or utilizing |
404 | During simulated operation or operating conditions |
406 | Center locating and shaping |
407.01 | With testing or indicating |
407.02 | Torquing threaded assemblage or determining torque herein |
407.04 | Using optical instrument (excludes mere human eyeballing) |
407.05 | Quantitative measuring or gauging |
407.06 | By radioactive tracing |
407.07 | By vibratory or oscillatory movement |
407.08 | Pressure, force, or weight determining |
407.09 | With aligning, guiding, or instruction |
408 | Of a slide fastener |
411 | Obtaining plural composite product pieces from preassembled workpieces |
412 | Obtaining plural product pieces from unitary workpiece |
413 | Breaking through weakened portion |
414 | Dividing through modified portion |
415 | Dividing on common outline |
416 | Coacting pieces |
417 | Dividing sequentially from leading end, e.g., by cutting or breaking |
418 | Providing transitory integral holding or handling portion |
419.1 | Shaping fiber or fibered material |
419.2 | Magnetically shaping |
421.1 | Shaping by direct application of fluent pressure |
422 | Shaping container end to encapsulate material |
423 | Utilizing transitory attached element or associated separate material |
425 | Shaping mating parts for reassembly in different positions |
426.1 | Disassembling |
426.2 | With other than ancillary treating or assembling |
426.3 | With conveying of work or disassembled work part |
426.4 | By altering or destroying work part or connector |
426.5 | By applying force |
428 | Assembling or joining |
429 | Progressively advancing of work assembly station or assembled portion of work |
432 | Punching, piercing or reaming part by surface of second part |
433 | By stringing |
434 | Retaining clearance for motion between assembled parts |
445 | Sizing mating parts during final positional association |
446 | With prestressing of part |
447 | By temperature differential (e.g., shrink fit) |
448 | Of skin on frame member |
450 | Elastic joining of parts |
452 | Prestressing rod, filament or strand |
453 | By snap fit |
454 | Of flexible wall, expansible chamber devices (e.g., bellows) |
455.1 | Spaced wall tube or receptacle |
456 | Of separate helix (e.g., screw thread) |
457 | Ribbing |
458 | With coating before or during assembling |
460 | Subsequently coating |
461 | With spreading of cable strands |
462 | Joining plate edge perpendicularly to frame |
463 | Peripheral joining of opposed mirror image parts to form a hollow body |
464 | Associating parts by use of aligning means (e.g., use of a drift pin or a "fixture") |
465 | Registering mating opposed tool parts (e.g., registering a punch and a cooperating die) |
466 | By multiple cooperating aligning means |
467 | Sequentially associating parts on stationary aligning means |
468 | By manipulating aligning means |
469 | Assembling a subassembly, then assembling with a second subassembly |
469.5 | Metal deforming with nonmetallic bonding |
505 | Joining by deforming |
506 | Securing cup or tube between axially extending concentric annuli |
509 | Overedge assembling of seated part |
510 | By necking in cup or tube wall |
512 | By flaring inserted cup or tube end |
513 | By bending over projecting prongs |
514 | Of parallel side-by-side elongated members |
515 | Inward deformation of aperture or hollow body wall |
521 | Surface interlocking |
522.1 | Radially expanding part in cavity, aperture, or hollow body |
525 | By driven force fit |
525.01 | By applying separate fastener |
526.2 | With separating, localizing, or eliminating of as-cast defects from a metal casting (e.g., anti-pipe) |
527.1 | Combined manufacture including applying or shaping of fluent material |
557 | Shaping one-piece blank by removing material |
559 | Work holding |
560 | CONVERTIBLE METAL WORKING MACHINE |
33R | PLURAL DIVERSE MANUFACTURING APPARATUS INCLUDING MEANS FOR METAL SHAPING OR ASSEMBLING |
33.2 | Slide fastener or slide fastener element |
33.5 | Binding or covering and cutting |
Type of machine |
34R | Forging and bending, cutting or punching |
561 | With means to feed work during tool contact |
563 | With means to feed work intermittently from one tool station to another |
37R | Stock turret |
38R | Blank turret |
38A | Rotary work - vertical axis |
38B | Rotary work - horizontal axis |
38C | Stationary work |
38D | Belt drive |
38E | Crankshaft |
38F | Collapsible tube |
38.9 | Endless belt |
564 | Separate tool stations for selective or successive operation on work |
564.1 | Including assembling or disassembling station |
564.2 | And means to machine work part to fit cooperating work part |
564.3 | And means to sever work prior to disassembling |
564.5 | And means to stake electric wire to commutator or armature in assembling of electric motor or generator |
564.6 | And means to sever work from supply |
564.7 | And means to machine product |
565 | Common reciprocating support for spaced tools |
566 | Including composite tool |
35.5 | With turret mechanism |
36 | Multiple turret |
39 | Tool turret |
40 | Rotary tool holder |
41 | Sliding tool holder |
42 | Fluid operated |
Cam operated |
45 | Lever operated |
46 | Rack-and-pinion operated |
47 | Screw operated |
48.5R | Including rotating and/or locking means |
50 | Multiple-tool holder |
51 | Laterally movable stock holder |
52 | Axial tool and transversely movable slide rest |
54 | Longitudinally and transversely movable |
56 | Oscillating tool |
56.5 | Including machining means |
57 | Attachment |
64 | Speed controller |
65 | Carriage stop mechanism |
33A | Flash remover |
33B | Welding strip ends |
33C | Casting and working |
33D | Tube making |
33E | Covering |
33F | Wire working |
33G | Radiator making |
33H | Printing plate |
33J | Turret |
33K | Assembly |
33L | Armature |
33M | Electrical connector or terminal |
33N | Tire valve or spark plug |
33P | Multiple station with conveyor |
33Q | Multiple stations working strip material |
33S | Continuous strip |
33T | Work on tubes |
650 | PLURAL DIVERSE MANUFACTURING APPARATUS |
700 | MEANS TO ASSEMBLE OR DISASSEMBLE |
701 | With means to regulate operation by use of templet, tape, card or other replaceable information supply |
705 | With means to test work or product |
706 | With randomly actuated stopping or disabling means |
707 | Responsive to condition of work or product |
708 | Responsive to operative (e.g., safety device, etc.) |
709 | With control means energized in response to activator stimulated by condition sensor |
710 | Including means to divert defective work part |
711 | Multiple station assembly or disassembly apparatus |
713 | Responsive to timer |
714 | Responsive to work or work-related machine element |
720 | With signal, scale, illuminator, or optical viewer |
722 | Including means to provide a controlled environment |
723 | Nuclear device |
724 | Roller or ball bearing |
726 | Heat exchanger |
728 | Means to place sheath on running-length core |
729 | Means to assemble electrical device |
730 | Storage cell or battery |
732 | Motor or generator |
733 | Means to assemble commutator |
734 | Means to position insulation |
735 | Means to stake wire to commutator or armature |
736 | Including deforming means |
737 | Magnetic memory device |
738 | Laminated device |
739 | Means to fasten electrical component to wiring board, base, or substrate |
742 | Multiple station assembly apparatus |
743 | Means to apply vacuum directly to position or hold work part |
744 | Means to apply magnetic force directly to position or hold work part |
745 | Conductor |
746 | Electrode |
747 | Terminal or connector |
755 | Multiple, independent conductors |
756 | Switch or fuse |
757 | Means to simultaneously fasten three or more parts |
758 | Means comprising hand-manipulatable implement |
759 | Means to align and advance work part |
760 | With work-holder for assembly |
761 | Means to fasten by deforming |
762 | Means to disassemble electrical device |
765 | Means to place traveler on ring or ring on bobbin of a textile machine |
766 | Slide fastener |
767 | Means to assemble stop onto stringer |
768 | Means to assemble slider onto stringer |
769 | Means to assemble teeth onto stringer |
770 | Disassembly means |
771 | Means to interrelatedly feed plural work parts from plural sources without manual intervention |
772 | Box or pallet assembly means |
773 | Means to assemble container |
774 | Handle to container |
775 | Label to container |
776 | Pressurized dispensing container |
777 | Hypodermic syringe |
778 | Including fluid component |
779 | Running-length work |
783 | Multiple station assembly apparatus |
784 | Including assembly pallet |
785 | Including turret-type conveyer |
786 | Including converging conveyers |
787 | And means to fasten work parts together |
791 | Multiple station assembly or disassembly apparatus |
792 | Including turret-type conveyer |
793 | Including converging conveyers |
795 | Means to fasten work parts together |
798 | Means to drive self-piercing work part |
799 | Including assembly pallet |
800 | Including provision to utilize thermal expansion of work |
801 | Means to assemble or disassemble container and fluid component |
802 | Vehicle wheel |
804 | Tumbler lock |
805 | Toy doll |
806 | Film or tape cartridge |
807 | Crystal to watch or clock |
808 | Means to insert or extract pen point |
809 | With magazine supply |
810 | And magnetic work-holder or positioner |
811.2 | Assembling means comprising hand-manipulatable implement |
812 | One work part comprising living tissue |
812.5 | Comprising driver for snap-off-mandrel fastener; e.g., Pop (TM) riveter |
813 | One work part comprising nut or screw |
814 | One work part comprising paper clip |
815 | Means to assemble tire stud into tire tread |
816 | Means to fasten by deforming |
818 | Means to fasten by deforming |
819 | Running-length work |
821 | Including means to vibrate work |
822 | Including work conveyer |
213.1 | Valve applying or removing |
214 | Engine valve unit puller or applier |
215 | Engine valve spring compressor (only) |
221.5 | To or from wheel rim of resilient tire or tube |
221.6 | Removal tool |
222 | Piston ring inserter or remover |
225 | Spring applier or remover |
226 | Transmission spring |
227 | Helical spring |
228 | Flat spiral spring (e.g., watch or clock type) |
229 | Circular spring |
230 | Leaf spring |
231 | Means to stake watch or clock |
233 | Brake lining to brake shoe |
234 | Tube and coextensive core |
235 | To apply or remove a resilient article (e.g., tube, sleeve, etc.) |
237 | Coupling to conduit |
237.5 | Loose-leaf sheet binder |
238 | Compressing parts together face to face |
239 | Spreading parts apart or separating them from face to face engagement |
240 | By rotation of work part |
241 | Means to string |
242 | Tool handle and tool |
243 | Tool chuck and tool |
243.5 | Overedge assembling means |
243.51 | Belt-hook attacher |
243.517 | Annular work |
243.518 | With radially acting tool inside annular work |
243.519 | With second workpiece inside annular work one workpiece moved to shape the other |
243.521 | Comprising driver for snap-off-mandrel fastener; e.g., Pop (TM) riveter |
243.522 | Including near side fastener shaping tool |
243.523 | Pneumatic- or fluid-actuated tool |
243.526 | Having rotary drive mechanism |
243.527 | Having allochiral actuating handles |
243.528 | Having repositionable annulus engaging tool |
243.529 | Including near side fastener shaping tool |
243.53 | Riveter |
243.56 | Clip applier |
243.57 | Binding or covering |
244 | Puller or pusher means, contained force multiplying operator |
245 | Hubcap and hub |
246 | Battery post and terminal |
247 | Cotter pin and cooperating member |
249 | Valve stem pin or key and another member |
250 | Machine key and another member |
251 | Arbor-type press means |
252 | Having fluid operator |
253 | Having wedge operator |
254 | Having percussion or explosive operator |
256 | Having screw operator |
267 | Having lever operator |
269 | Means comprising piston ring group contractor or holder |
270 | Means comprising hand manipulatable tool |
271 | Aligner or center |
275 | Means comprising impact receiving tool |
278 | Hand gripper for direct push or pull |
281.1 | With work-holder for assembly |
281.2 | For assembling a luminescent mantle |
281.3 | And assembling press (e.g., truss assembling means, etc.) |
281.4 | Having means to permit support movement while work is thereon |
281.5 | Including means to relatively position plural work parts |
281.6 | Work-supported apparatus |
282 | Tube, sleeve or ferrule |
283 | Work gripper, anvil, or element |
283.5 | By deforming |
284 | MISCELLANEOUS APPARATUS |
CROSS-REFERENCE ART COLLECTIONS | ||
900 | METHODS AND APPARATUS FOR ASSEMBLY BY ELECTROSTATIC ATTRACTION |
901 | BALANCING METHOD |
902 | FILTER MAKING |
903 | FIREARM BOLT MAKING |
904 | LAMINATED METAL ARTICLE MAKING |
905 | MAKING COIL WOUND WALL SCREEN |
906 | NUCLEAR DEVICE MAKING |
FOREIGN ART COLLECTIONS | ||
FOR000 | CLASS-RELATED FOREIGN DOCUMENTS |
DIGESTS | ||
DIG1 | METHOD OR APPARATUS INVOLVING ADHESIVE |
DIG2 | METHOD OR APPARATUS USING ALUMINUM |
DIG3 | METHOD OR APPARATUS WITH BENDING |
DIG4 | METHOD OR APPARATUS WITH BRAZING |
DIG5 | METHOD OR APPARATUS WITH CASTING |
DIG6 | METHOD OR APPARATUS WITH CENTRIFUGAL CASTING |
DIG7 | METHOD OR APPARATUS WITH CLEANING |
DIG8 | METHOD OR APPARATUS WITH COMPOSITE CASTING |
DIG9 | METHOD OR APPARATUS WITH CUP FORMED AND BOTTOM REMOVED |
DIG10 | METHOD OR APPARATUS WITH DIE CASTING |
DIG11 | METHOD OR APPARATUS WITH DRAWING |
DIG12 | METHOD OR APPARATUS WITH ELECTROPLATING |
DIG13 | METHOD OR APPARATUS WITH ELECTRIC HEATING |
DIG14 | METHOD OR APPARATUS WITH ENAMELING |
DIG15 | FORMING ARTICLE ON END OF LONG STOCK AND THEN CUTTING OFF |
DIG16 | METHOD OR APPARATUS WITH ETCHING |
DIG17 | METHOD OR APPARATUS WITH MAKING FLOW LINES; CRYSTALS |
DIG18 | METHOD OR APPARATUS WITH FORGING |
DIG19 | METHOD OR APPARATUS WITH GRINDING |
DIG20 | METHOD OR APPARATUS FOR DOUBLE BLANK |
DIG21 | METHOD OR APPARATUS FOR HEATING |
DIG22 | METHOD OR APPARATUS USING INDIUM |
DIG23 | METHOD OR APPARATUS WITH KNURLING |
DIG24 | METHOD OR APPARATUS WITH LOCAL HEATING |
DIG25 | METHOD OR APPARATUS WITH PARTICULAR MATERIAL |
DIG26 | METHOD OR APPARATUS WITH MACHINING |
DIG27 | METHOD OR APPARATUS USING MAGNESIUM |
DIG28 | MAGNETIC RECORDING DIGEST |
DIG29 | MOLDING WITH OTHER STEP |
DIG30 | ORNAMENTING WITH OTHER STEP |
DIG31 | PRESSING POWDER WITH OTHER STEP |
DIG32 | ROLLING WITH OTHER STEP |
DIG33 | SCORING WITH OTHER STEP |
DIG34 | SCALING WITH OTHER STEP |
DIG35 | SHRINK FITTING WITH OTHER STEP |
DIG36 | SHOT BLASTING WITH OTHER STEP |
DIG37 | STAMPING WITH OTHER STEP |
DIG38 | SPOT WELDING WITH OTHER STEP |
DIG39 | SPRAYING WITH OTHER STEP |
DIG40 | STRIPS OF REPEATED ARTICLES - CUT UP LATER |
DIG41 | TAPER TUBE MAKING |
DIG42 | TENSION APPLIED DURING WORKING |
DIG43 | UPSETTING AND FLANGING TUBE END |
DIG44 | VACUUM |
DIG45 | TITANIUM |
DIG46 | VIBRATION |
DIG47 | EXTRUDING WITH OTHER STEP |
DIG48 | WELDING WITH OTHER STEP |
DIG49 | WORK HARDENING WITH OTHER STEP |
DIG50 | CUTTING FLUID APPLICATION AND DEBRIS CONTROL |
DIG51 | POWER STOP CONTROL FOR MOVABLE ELEMENT |
DIG52 | CHIP BREAKER |
DIG53 | WORKPIECE AND DEBRIS SEPARATOR |
DIG54 | FLUID CONTROL INTERRELATED WITH MACHINE TOOL MECHANISM |
DIG55 | WITH CUTTER DRIVE |
DIG56 | WITH SHIELD OR HOOD MOVEMENTS |
DIG57 | WITH CUTTER FEED |
DIG59 | HOOD ACTUATED BY TOOL OR WORK APPROACH |
DIG60 | PROGRESSIVE DISPLACEMENT OF HOOD |
DIG61 | PLURAL-TYPE DEBRIS REMOVERS |
DIG62 | RUBBING TRANSFER OF SOLID COATING TO ROTATING ELEMENT |
DIG63 | FLUID CONVEYOR OR APPLICATOR |
DIG64 | AMBULATORY CUTTER WITH FLUENT CONDUIT |
DIG65 | CUTTER CONTAINED SUPPLY RESERVOIR |
DIG66 | FLUID FLOW TO CHANNELED CUTTER |
DIG67 | ROTATING CUTTER |
DIG68 | HOLLOW SPINDLE CONTAINS |
DIG69 | FLUID SPREADER CONTACTS CUTTER |
DIG70 | ROTARY OR OSCILLATING FLUID APPLICATOR |
DIG71 | COMPLETE IMMERSION OF CUTTER |
DIG72 | DIP OR SPLASH SUPPLY |
DIG73 | CHAIN OR BELT CONVEYOR |
DIG74 | PARTIAL IMMERSION OF CUTTER |
DIG75 | ADJUSTABLE LIQUID LEVEL |
DIG76 | MOVABLE LIQUID-CARRYING TROUGH |
DIG77 | WITH SEPARATOR OR FILTER |
DIG78 | AIR BLAST AND/OR VACUUM CONVEYOR |
DIG79 | REMOVABLE DEBRIS RECEPTACLE |
DIG81 | GAS AS A CONVEYOR |
DIG82 | AIR CURRENT GENERATED BY CUTTER |
DIG83 | FAN COAXIAL WITH CUTTER |
DIG84 | VACUUM EXHAUST TYPE |
DIG85 | WITH FLUID CONTROL VALVE |
DIG86 | HOOD ENCASED CUTTER |
DIG87 | MULTIPLE FLUID PATHS |
DIG88 | BY PROJECTING, SQUIRTING OR DRIPPING |
DIG89 | GAS ENTRAINED LIQUID SUPPLY |
DIG90 | ELEVATED TANK SUPPLY |
DIG91 | PLURAL DISCHARGE OPENINGS |
DIG92 | FLUID CHANNEL IN CUTTER |
DIG93 | PLURAL DISCHARGE LOCI |
DIG94 | DEBRIS REMOVER, CATCHER, OR DEFLECTOR |
DIG95 | MAGNETIC OR ELECTROSTATIC |
DIG96 | MECHANICAL REMOVAL ASSISTANT |
DIG97 | CUTTER ENGAGING CLEANER |
DIG98 | ROTATING, RECIPROCATING OR OSCILLATING CLEANER |
DIG99 | FLEXIBLE CONVEYOR |
DIG100 | SCREW OR CAM CONVEYOR |
DIG101 | PAN, BED, OR TABLE |
DIG102 | DEBRIS CHUTE |
DIG104 | TOOL OR WORK ATTACHED |
DIG105 | ASSEMBLY, MAGNETIC, OR INDICIA TOOL |
This page is produced by the Office of Classification Support (Office of Patent Classification) for the Reference Tools Project.
Please send questions and comments to usptoinfo@uspto.gov .
Note: The Patent and Trademark Depository Library Program (PTDLP) administers a nationwide network of public, state and academic libraries designated as Patent and Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate Patent and Trademark Information Support Diverse Intellectual Property Needs of the Public. PTDL Contact Information
Note: For information/comments on electronic information products, such as purchasing USPTO data, or to discuss system requirements for magnetic tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
Contact Information
Or, browse
their on-line catalog.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|