[Code of Federal Regulations]
[Title 14, Volume 2]
[Revised as of January 1, 2008]
From the U.S. Government Printing Office via GPO Access
[CITE: 14CFR125.157]

[Page 993]
 
                     TITLE 14--AERONAUTICS AND SPACE
 
CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION 
                               (CONTINUED)
 
 PART 125_CERTIFICATION AND OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 
 
              Subpart E_Special Airworthiness Requirements
 
Sec. 125.157  Lines and fittings.

    (a) Each line, and its fittings, that is located in a designated 
fire zone, if it carries flammable fluids or gases under pressure, or is 
attached directly to the engine, or is subject to relative motion 
between components (except lines and fittings forming an integral part 
of the engine), must be flexible and fire-resistant with fire-resistant, 
factory-fixed, detachable, or other approved fire-resistant ends.
    (b) Lines and fittings that are not subject to pressure or to 
relative motion between components must be of fire-resistant materials.