[Code of Federal Regulations]
[Title 40, Volume 23]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR158.160]

[Page 101-102]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 158_DATA REQUIREMENTS FOR REGISTRATION--Table of Contents
 
              Subpart C_Product Chemistry Data Requirements
 
Sec. 158.160  Description of materials used to produce the product.

    The following information must be submitted on the materials used to 
produce the product:
    (a) Products not produced by an integrated system. (1) For each 
active ingredient that is derived from an EPA-registered product:
    (i) The name of the EPA-registered product.
    (ii) The EPA registration number of that product.
    (2) For each inert ingredient:
    (i) Each brand name, trade name, or other commercial designation of 
the ingredient.
    (ii) All information that the applicant knows (or that is reasonably 
available to him) concerning the composition (and, if requested by the 
Agency, chemical and physical properties) of the ingredient, including a 
copy of technical specifications, data sheets, or

[[Page 102]]

other documents describing the ingredient.
    (iii) If requested by the Agency, the name and address of the 
producer of the ingredient or, if that information is not known to the 
applicant, the name and address of the supplier of the ingredient.
    (b) Products produced by an integrated system. (1) The information 
required by paragraph (a)(1) of this section concerning each active 
ingredient that is derived from an EPA-registered product (if any).
    (2) The following information concerning each active ingredient that 
is not derived from an EPA-registered product:
    (i) The name and address of the producer of the ingredient (if 
different from the applicant).
    (ii) Information on each starting material used to produce the 
active ingredient, as follows:
    (A) Each brand name, trade name, or other commercial designation of 
the starting material.
    (B) The name and address of the person who produces the starting 
material or, if that information is not known to the applicant, the name 
and address of each person who supplies the starting material.
    (C) All information that the applicant knows (or that is reasonably 
available to him) concerning the composition (and if requested by the 
Agency, chemical or physical properties) of the starting material, 
including a copy of all technical specifications, data sheets, or other 
documents describing it.
    (3) The information required by paragraph (a)(2) of this section 
concerning each inert ingredient.
    (c) Additional information. On a case-by-case basis, the Agency may 
require additional information on substances used in the production of 
the product.