[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR427.54] [Page 53] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 427_ASBESTOS MANUFACTURING POINT SOURCE CATEGORY --Table of Contents Subpart E_Asbestos Millboard Subcategory Sec. 427.54 Pretreatment standards for existing sources. Any existing source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403. In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a point source subject to the provisions of this subpart. ------------------------------------------------------------------------ Pollutant or pollutant property Pretreatment standard ------------------------------------------------------------------------ pH........................................ No limitation. TSS....................................... Do. ------------------------------------------------------------------------ [40 FR 6445, Feb. 11, 1975, as amended at 60 FR 33961, June 29, 1995]