[Code of Federal Regulations]
[Title 40, Volume 8]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR61.18]

[Page 38-39]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 61_NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS
--Table of Contents
 
                      Subpart A_General Provisions
 
Sec. 61.18  Incorporations by reference.

    The materials listed below are incorporated by reference in the 
corresponding sections noted. These incorporations by reference were 
approved by the Director of the Federal Register in accordance with 5 
U.S.C. 552(a) and 1 CFR part 51. These materials are incorporated as 
they exist on the date of the approval, and a notice of any change in 
these materials will be published in the Federal Register. The materials 
are available for inspection at the corresponding address noted below, 
and at U.S. EPA's Air Docket at 1200 Pennsylvania Avenue, NW, 
Washington, DC 20460, or at the National Archives and Records 
Administration (NARA). For information on the availability of this 
material at NARA, call 202-741-6030, or go to: http://www.archives.gov/
federal--register/code--of--federal--regulations/ibr--locations.html.
    (a) The following materials are available for purchase from at least 
one of the following addresses: American Society for Testing and 
Materials (ASTM) International, 100 Barr Harbor Drive, P.O. Box C700, 
West Conshohocken, PA, 19428-2959; or University Microfilms 
International, 300 North Zeeb Road, Ann Arbor, MI 48106.
    (1) ASTM D737-75, Standard Test Method for Air Permeability of 
Textile Fabrics, incorporation by reference (IBR) approved January 27, 
1983 for Sec. 61.23(a).
    (2) ASTM D835-85, Standard Specification for Refined Benzene-485, 
IBR approved September 14, 1989 for Sec. 61.270(a).
    (3) ASTM D836-84, Standard Specification for Industrial Grade 
Benzene, IBR approved September 14, 1989 for Sec. 61.270(a).
    (4) ASTM D1193-77, 91, Standard Specification for Reagent Water, IBR 
approved for appendix B: Method 101, Section 7.1.1; Method 101A, Section 
7.1.1; and Method 104, Section 7.1; Method 108, Section 7.1.3; Method 
108A, Section 7.1.1; Method 108B, Section 7.1.1; Method 108C, Section 
7.1.1; and Method 111, Section 7.3.
    (5) ASTM D2267-68, 78, 88, Standard Test Method for Aromatics in 
Light Naphthas and Aviation Gasoline by Gas Chromatography, IBR approved 
September 30, 1986, for Sec. 61.67(h)(1).
    (6) ASTM D2359-85a, 93, Standard Specification for Refined Benzene-
535, IBR approved September 14, 1989 for Sec. 61.270(a).
    (7) ASTM D2382-76, 88, Heat of Combustion of Hydrocarbon Fuels by 
Bomb Calorimeter (High-Precision Method), IBR approved June 6, 1984 for 
Sec. 61.245(e)(3).
    (8) ASTM D2504-67, 77, 88 (Reapproved 1993), Noncondensable Gases in 
C3 and Lighter Hydrocarbon Products by Gas Chromatography, 
IBR approved June 6, 1984 for Sec. 61.245(e)(3).
    (9) ASTM D2879-83, Standard Test Method for Vapor Pressure--
Temperature Relationship and Initial Decomposition Temperature of 
Liquids by Isoteniscope, IBR approved December 14, 2000 for Sec. 
61.241.
    (10) ASTM D2986-71, 78, 95a, Standard Method for Evaluation of Air, 
Assay Media by the Monodisperse DOP (Dioctyl Phthalate) Smoke Test, IBR 
approved for appendix B: Method 103, Section 6.1.3.
    (11) ASTM D4420-94, Standard Test Method for Determination of 
Aromatics in Finished Gasoline by Gas Chromatography, IBR approved for 
Sec. 61.67(h)(1).
    (12) ASTM D4734-87, 96, Standard Specification for Refined Benzene-
545, IBR approved September 14, 1989 for Sec. 61.270(a).
    (13) ASTM D4809-95, Standard Test Method for Heat of Combustion of 
Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method), IBR 
approved for Sec. 61.245(e)(3).
    (14) ASTM E50-82, 86, 90 (Reapproved 1995), Standard Practices for 
Apparatus Reagents, and Safety Precautions for Chemical Analysis of 
Metals, IBR approved for appendix B: Method 108C, Section 6.1.4.

[[Page 39]]

    (b) The following material is available from the U.S. EPA 
Environmental Monitoring and Support Laboratory, Cincinnati, Ohio 45268.
    (1) Method 601, Test Method for Purgeable Halocarbons, July 1982, 
IBR approved September 30, 1986, for Sec. 61.67(g)(2).
    (c) The following material is available for purchase from the 
American National Standards Institute, 25 West 43rd Street, 4th Floor, 
New York, New York 10036.
    (1) ANSI N13.1-1969, ``Guide to Sampling Airborne Radioactive 
Materials in Nuclear Facilities.'' IBR approved for 61.93(b)(2)(ii) and 
61.107(b)(2)(ii).
    (2) ANSI/HPS N13.1-1999 ``Sampling and Monitoring Releases of 
Airborne Radioactive Substances from the Stacks and Ducts of Nuclear 
Facilities,'' IBR approved October 9, 2002, for Sec. Sec. 61.93(c); 
61.107(d) and Method 114, paragraph 2.1 of Appendix B to 40 CFR part 61.
    (d) The following material is available from the Superintendent of 
Documents, U.S. Government Printing Office, Washington, DC 20402-9325, 
telephone (202) 512-1800 or outside of Washington, DC area: 1-866-512-
1800.
    (1) Test Methods for Evaluating Solid Waste, Physical/Chemical 
Methods, EPA Publication SW-846, Third Edition, November 1986, as 
amended by Revision I, December 1987, Order Number 955-001-00000-1:
    (i) Method 8020, Aromatic Volatile Organics, IBR approved March 7, 
1990, for Sec. 61.355(c)(2)(iv)(A).
    (ii) Method 8021, Volatile Organic Compounds in Water by Purge and 
Trap Capillary Column Gas Chromatography with Photoionization and 
Electrolytic Conductivity Detectors in Series, IBR approved March 7, 
1990, for Sec. 61.355(c)(2)(iv)(B).
    (iii) Method 8240, Gas Chromatography/Mass Spectrometry for Volatile 
Organics, IBR approved March 7, 1990, for Sec. 61.355(c)(2)(iv)(C).
    (iv) Method 8260, Gas Chromatography/Mass Spectrometry for Volatile 
Organics: Capillary Column Technique, IBR approved March 7, 1990, for 
Sec. 61.355(c)(2)(iv)(D).
    (e) The materials listed in this paragraph (e) are available for 
purchase from the American Petroleum Institute (API), 1220 L Street, 
NW., Washington, DC 20005.
    (1) API Publication 2517, Evaporative Loss from External Floating-
Roof Tanks, Third Edition. February 1989. IBR approved December 14, 2000 
for Sec. 61.241.
    (2) [Reserved]

[48 FR 3740, Jan. 27, 1983, as amended at 48 FR 55266, Dec. 9, 1983; 49 
FR 23520, June 6, 1984; 51 FR 34914, Sept. 30, 1986; 54 FR 38073, Sept. 
14, 1989; 54 FR 51704, Dec. 15, 1989; 55 FR 8341, Mar. 7, 1990; 55 FR 
18331, May 2, 1990; 55 FR 22027, May 31, 1990; 55 FR 32914, Aug. 13, 
1990; 65 FR 62150, Oct. 17, 2000; 65 FR 78280, Dec. 14, 2000; 67 FR 
57166, Sept. 9, 2002; 69 FR 18803, Apr. 9, 2004]