Building Standards

ASTM's building standards are instrumental in specifying, evaluating, and testing the dimensional, mechanical, rheological, and other performance requirements of the materials used in the manufacture of main and auxiliary building parts and components. These materials include construction sealants, structural members, insulation systems, and other facilities used in conjunction with the erection of the foundation, walls, roofs, ceilings, doors, and windows of both commercial and domestic building structures. These building standards are helpful in guiding manufacturers, construction companies, architectural firms, and other users of such parts and components in their proper fabrication and installation procedures, as well as the possible hazards involved during these processes.

Jump to:

Adhesion

Designation	Title
C719 - 93(2005)	Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C736 - 00(2006)e1	Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C794 - 06	Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C907 - 03(2008)	Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908 - 00(2006)	Standard Test Method for Yield Strength of Preformed Tape Sealants
C910 - 06	Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C961 - 06	Standard Test Method for Lap Shear Strength of Sealants
C1135 - 00(2005)	Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1216 - 03(2008)	Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1247 - 09	Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1265 - 94(2005)e1	Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1367 - 06	Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1382 - 05	Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1521 - 08a	Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1523 - 04	Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1635 - 06	Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

Aerosol Foam Sealants

Designation	Title
C1536 - 03	Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
C1620 - 05	Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1642 - 07	Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643 - 08	Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

Air Leakage and Ventilation Performance

Designation	Title
E241 - 08	Standard Guide for Limiting Water-Induced Damage to Buildings
E741 - 00(2006)	Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E779 - 03	Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E1186 - 03	Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1258 - 88(2008)	Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1465 - 08a	Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
E1554 - 07	Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
E1677 - 05	Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls
E1827 - 96(2007)	Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1998 - 02(2007)	Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2029 - 99(2004)	Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2121 - 08	Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2178 - 03	Standard Test Method for Air Permeance of Building Materials
E2342 - 03	Standard Test Method for Durability Testing of Duct Sealants
E2357 - 05	Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

Application of Acoustical Materials and Systems

Designation	Title
C367 - 05	Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C635 / C635M - 07	Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636 / C636M - 08	Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
E557 - 00(2006)	Standard Guide for The Installation of Operable Partitions
E580 / E580M - 08a	Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
E1042 - 02(2008)	Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
E1264 - 08	Standard Classification for Acoustical Ceiling Products
E1433 - 04	Standard Guide for Selection of Standards on Environmental Acoustics

Building Economics

Designation	Title
E833 - 08	Standard Terminology of Building Economics
E917 - 05e1	Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E964 - 06e1	Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E1057 - 06e1	Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074 - 06e2	Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1121 - 07e1	Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1185 - 07e1	Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1369 - 07e2	Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1557 - 05e1	Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
E1699 - 00(2005)	Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems
E1765 - 07e1	Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
E1804 - 07	Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1946 - 07	Standard Practice for Measuring Cost Risk of Buildings and Building Systems
E2013 - 06	Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2083 - 05	Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
E2103 - 06	Standard Classification for Bridge Elements and Related Approach Work
E2150 - 04	Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
E2166 - 07	Standard Practice for Organizing and Managing Building Data
E2168 - 06	Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
E2204 - 05e1	Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
E2506 - 06e1	Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
E2514 - 08	Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
E2516 - 06	Standard Classification for Cost Estimate Classification System
E2620 - 08	Standard Classification for Program and Project Estimate Summaries
E2637 - 08	Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E 2150

Building Preservation and Rehabilitation Technology

Designation	Title
E1368 - 05e1	Standard Practice for Visual Inspection of Asbestos Abatement Projects
E1857 - 97(2004)	Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E2167 - 01(2008)	Standard Guide for Selection and Use of Stone Consolidants
E2260 - 03	Standard Guide for Repointing (Tuckpointing) Historic Masonry
E2356 - 04e1	Standard Practice for Comprehensive Building Asbestos Surveys
E2394 - 04e1	Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products

Community Noise

Designation	Title
E1014 - 08	Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
E1503 - 06	Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
E1686 - 03	Standard Guide for Selection of Environmental Noise Measurements and Criteria
E1779 - 96a(2004)	Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
E1780 - 04	Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

Compression Seal and Lock Strip Gaskets

Designation	Title
C509 - 06	Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C542 - 05	Standard Specification for Lock-Strip Gaskets
C716 - 06	Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C864 - 05	Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C963 - 00(2007)	Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964 - 07	Standard Guide for Lock-Strip Gasket Glazing
C1083 - 06	Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1115 - 06	Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1166 - 06	Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
E2203 - 02(2008)	Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

Control Systems

Designation	Title
F1465 - 03	Standard Guide for Selection of Security Control Systems

Definitions and Editorial

Designation	Title
C634 - 08a	Standard Terminology Relating to Building and Environmental Acoustics

Detention Hardware

Designation	Title
F1577 - 05	Standard Test Methods for Detention Locks for Swinging Doors
F1643 - 05	Standard Test Methods for Detention Sliding Door Locking Device Assembly
F1758 - 05	Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F2542 - 05	Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities

Durability Performance of Building Constructions

Designation	Title
E546 - 08	Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
E576 - 08	Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
E773 - 01	Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units
E2094 - 02	Standard Practice for Evaluating the Service Life of Chromogenic Glazings
E2141 - 06	Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2188 - 02	Standard Test Method for Insulating Glass Unit Performance
E2189 - 02	Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
E2190 - 08	Standard Specification for Insulating Glass Unit Performance and Evaluation
E2240 - 06	Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2241 - 06	Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2269 - 05	Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
E2323 - 04	Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer
E2354 - 04	Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
E2355 - 04	Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

Exterior Building Wall Systems

Designation	Title
E1825 - 06	Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E2099 - 00(2007)	Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2128 - 01a	Standard Guide for Evaluating Water Leakage of Building Walls
E2266 - 04	Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E2270 - 05	Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
E2505 - 07	Standard Practice for Industrial Rope Access

Exterior Insulation and Finish Systems (EIFS)

Designation	Title
E2098 - 00(2006)	Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2110 - 03	Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
E2134 - 01(2006)	Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
E2273 - 03	Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
E2321 - 03	Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
E2359 - 06	Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
E2430 - 05	Standard Specification For Expanded Polystyrene ("EPS") Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems ("EIFS")
E2485 - 06	Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
E2486 - 06	Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
E2568 - 07	Standard Specification for PB Exterior Insulation and Finish Systems
E2570 - 07	Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage

Furnishings and Equipment

Designation	Title
F1534 - 05	Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
F1550 - 05	Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
F1870 - 05	Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

General Test Methods

Designation	Title
C603 - 04(2008)	Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C639 - 01(2007)	Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C661 - 06	Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C679 - 03	Standard Test Method for Tack-Free Time of Elastomeric Sealants
C681 - 03	Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C711 - 03	Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 - 03	Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C731 - 00(2006)	Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C765 - 97(2007)	Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C771 - 03	Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772 - 03	Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C782 - 03	Standard Test Method for Softness of Preformed Tape Sealants
C792 - 04(2008)	Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C879 - 03	Standard Test Methods for Release Papers Used With Preformed Tape Sealants
C972 - 00(2006)	Standard Test Method for Compression-Recovery of Tape Sealant
C1016 - 02(2008)	Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1087 - 00(2006)	Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1183 - 04(2008)	Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1241 - 00(2005)	Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1246 - 00(2006)	Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1253 - 93(2005)	Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1266 - 02(2007)	Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1294 - 07	Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1681 - 09	Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
D2202 - 00(2006)	Standard Test Method for Slump of Sealants
D2203 - 01(2007)	Standard Test Method for Staining from Sealants
D2377 - 00(2008)	Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2452 - 03	Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453 - 03	Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

High Rise Building External Evacuation Devices

Designation	Title
E2484 - 08	Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
E2513 - 07	Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

Horizontal and Vertical Structures/Structural Performance of Completed Structures

Designation	Title
E72 - 05	Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73 - 83(2007)	Standard Practice for Static Load Testing of Truss Assemblies
E196 - 06	Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
E455 - 04	Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E529 - 04	Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E564 - 06	Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E575 - 05	Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E661 - 03	Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E695 - 03	Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E1803 - 06	Standard Test Methods for Determining Structural Capacities of Insulated Panels
E2126 - 08	Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
E2127 - 01a(2007)	Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
E2322 - 03	Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

Lead Hazards Associated with Buildings

Designation	Title
E1605 - 04	Standard Terminology Relating to Lead in Buildings
E1613 - 04	Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1644 - 04	Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645 - 01(2007)	Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1726 - 01	Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727 - 05	Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728 - 03	Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1729 - 05	Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1753 - 04	Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1775 - 07	Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1792 - 03	Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1795 - 04	Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796 - 03	Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797 - 04	Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1828 - 01	Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint
E1864 - 02	Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and around Buildings and Related Structures
E1908 - 03	Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1979 - 04	Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E2051 - 01	Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis
E2115 - 06	Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
E2239 - 04	Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2252 - 04	Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
E2255 - 04	Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
E2271 - 05a	Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities

Materials and Processes for Durable Rigidwall Relocatable Structures

Designation	Title
E864 - 08	Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
E865 - 08	Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866 - 05	Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E874 - 04	Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E990 - 04	Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E1091 - 08	Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1307 - 05	Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1555 - 08	Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556 - 08	Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1730 - 04	Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1749 - 05	Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1773 - 05	Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1793 - 05	Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794 - 08	Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
E1800 - 08	Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
E1801 - 03	Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1826 - 05	Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1851 - 04	Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1925 - 04	Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1974 - 06	Standard Specification for Shelter, Electrical Equipment S-250/G
E1975 - 06	Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976 - 05	Standard Specification for Shelter, Tactical, Nonexpandable
E1977 - 05	Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978 - 05	Standard Specification for Shelter, Tactical, Expandable, Two-Side
E2004 - 04	Standard Test Method for Facing Cleavage of Sandwich Panels
E2377 - 04	Standard Specification for Shelter, Electrical Equipment, Lightweight
E2462 - 05	Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
E2463 - 05	Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
E2517 - 06	Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/ 2 Ton Lightweight Medium Tactical Vehicle (LMTV)/M1082, 2 1/ 2 Ton LMTV Trailer)
E2518 - 06	Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)

Mechanical and Electrical System Noise

Designation	Title
E477 - 06a	Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E1124 - 97(2004)	Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
E1222 - 90(2002)	Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
E1265 - 04	Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
E1574 - 98(2006)	Standard Test Method for Measurement of Sound in Residential Spaces
E2202 - 02	Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
E2459 - 05	Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans

Open Plan Spaces

Designation	Title
E1110 - 06	Standard Classification for Determination of Articulation Class
E1111 - 07	Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
E1130 - 08	Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
E1179 - 07	Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
E1374 - 06	Standard Guide for Open Office Acoustics and Applicable ASTM Standards
E1573 - 02	Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels

Performance of Metal Roof Systems

Designation	Title
E1514 - 98(2003)	Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1592 - 05	Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1637 - 98(2003)	Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1646 - 95(2003)	Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1680 - 95(2003)	Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E2140 - 01	Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

Performance of Railing Systems and Glass for Floors and Stairs

Designation	Title
E894 - 88(2004)	Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E935 - 00(2006)	Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E985 - 00(2006)	Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
E1481 - 00a(2008)	Standard Terminology of Railing Systems and Rails for Buildings
E2353 - 06	Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2358 - 04	Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades

Performance of Windows, Doors, Skylights and Curtain Walls

Designation	Title
E283 - 04	Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E330 - 02	Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331 - 00(2009)	Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E405 - 04	Standard Test Methods for Wear Testing Rotary Operators for Windows
E547 - 00(2009)	Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E783 - 02	Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E987 - 88(2001)	Standard Test Methods for Deglazing Force of Fenestration Products
E997 - 01	Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E998 - 05	Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1105 - 00(2008)	Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1233 - 06	Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1300 - 07e1	Standard Practice for Determining Load Resistance of Glass in Buildings
E1423 - 06	Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424 - 91(2008)	Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425 - 07	Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
E1748 - 95(2001)	Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1886 - 05	Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1996 - 08e2	Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E2025 - 99(2006)	Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
E2068 - 00(2008)	Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2112 - 07	Standard Practice for Installation of Exterior Windows, Doors and Skylights
E2264 - 05	Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
E2268 - 04	Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
E2319 - 04	Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E2395 - 06	Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact.
E2431 - 06	Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
E2461 - 05	Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
F588 - 07	Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F842 - 04	Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

Physical Barriers

Designation	Title
A627 - 03	Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
F1450 - 05	Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities
F1592 - 05	Standard Test Methods for Detention Hollow Metal Vision Systems
F1915 - 05	Standard Test Methods for Glazing for Detention Facilities
F2322 - 03	Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

Serviceability

Designation	Title
E154 - 08a	Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E577 - 85(2002)	Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
E605 - 93(2006)	Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E713 - 88(2002)	Standard Guide for Selection of Scales for Metric Building Drawings
E736 - 00(2006)	Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E759 - 92(2005)	Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760 - 92(2005)	Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E761 - 92(2005)	Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E835 / E835M - 93(2002)	Standard Guide for Modular Coordination of Clay and Concrete Masonry Units
E859 - 93(2006)	Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E936 - 98(2004)	Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E937 - 93(2005)	Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E1155 - 96(2008)	Standard Test Method for Determining F_F Floor Flatness and F_L Floor Levelness Numbers
E1155M - 96(2008)	Standard Test Method for Determining F_F Floor Flatness and F_L Floor Levelness Numbers [Metric]
E1399 - 97(2005)	Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1486 - 98(2004)	Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M - 98(2004)	Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
E1494 - 92(2002)	Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
E1513 - 93(2005)e1	Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1612 - 94(2005)	Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1643 - 98(2005)	Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1745 - 97(2004)	Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1783 - 96(2005)	Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1993 - 98(2008)	Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E2174 - 04	Standard Practice for On-Site Inspection of Installed Fire Stops
E2393 - 04	Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
E2634 - 08	Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

Solid Fuel Burning Appliances

Designation	Title
E1509 - 04	Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1602 - 03	Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E2515 - 07	Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution tunnel
E2558 - 08	Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
E2618 - 08	Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances

Sound Absorption

Designation	Title
C384 - 04	Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C423 - 08a	Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C522 - 03	Standard Test Method for Airflow Resistance of Acoustical Materials
E795 - 05	Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E1050 - 08	Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
E2235 - 04e1	Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

Sound Transmission

Designation	Title
E90 - 04	Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E336 - 08	Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
E413 - 04	Classification for Rating Sound Insulation
E492 - 04	Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
E596 - 96(2002)e1	Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
E756 - 05	Standard Test Method for Measuring Vibration-Damping Properties of Materials
E966 - 04	Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
E989 - 06	Standard Classification for Determination of Impact Insulation Class (IIC)
E1007 - 04e1	Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
E1123 - 86(2003)	Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
E1289 - 08	Standard Specification for Reference Specimen for Sound Transmission Loss
E1332 - 90(2003)	Standard Classification for Determination of Outdoor-Indoor Transmission Class
E1414 - 06	Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
E1704 - 95(2002)	Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
E2179 - 03e2	Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
E2249 - 02(2008)	Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
E2638 - 08	Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

Specifications, Guides and Practices

Designation	Title
C834 - 05	Standard Specification for Latex Sealants
C919 - 08	Standard Practice for Use of Sealants in Acoustical Applications
C920 - 08	Standard Specification for Elastomeric Joint Sealants
C1021 - 08	Standard Practice for Laboratories Engaged in Testing of Building Sealants
C1184 - 05	Standard Specification for Structural Silicone Sealants
C1193 - 09	Standard Guide for Use of Joint Sealants
C1249 - 06a	Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1281 - 03	Standard Specification for Preformed Tape Sealants for Glazing Applications
C1299 - 03	Standard Guide for Use in Selection of Liquid-Applied Sealants
C1311 - 02	Standard Specification for Solvent Release Sealants
C1330 - 02(2007)	Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
C1369 - 07	Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1375 - 00(2005)	Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1392 - 00(2005)	Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1394 - 03(2008)	Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1401 - 07	Standard Guide for Structural Sealant Glazing
C1472 - 06	Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1481 - 00(2006)	Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1487 - 02(2007)	Standard Guide for Remedying Structural Silicone Glazing
C1518 - 04	Standard Specification for Precured Elastomeric Silicone Joint Sealants
C1520 - 02	Standard Guide for Paintability of Latex Sealants
C1564 - 04	Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

Structural Performance of Connections in Building Construction

Designation	Title
E488 - 96(2003)	Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements
E754 - 80(2006)	Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E1190 - 95(2007)	Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1512 - 01(2007)	Standard Test Methods for Testing Bond Performance of Bonded Anchors
E2265 - 08	Standard Terminology for Anchors and Fasteners in Concrete and Masonry

Terminology and Editorial

Designation	Title
E631 - 06	Standard Terminology of Building Constructions

Terminology of Building Seals and Sealants

Designation	Title
C717 - 09	Standard Terminology of Building Seals and Sealants

Weathering

Designation	Title
C510 - 05a	Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C732 - 06	Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734 - 06	Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C793 - 05	Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C1248 - 08	Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1257 - 06a	Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1442 - 06	Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1501 - 09	Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1519 - 04	Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1589 - 05	Standard Practice for Outdoor Weathering of Construction Seals and Sealants

Whole Buildings and Facilities

Designation	Title
E1334 - 95(2005)	Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
E1410 - 91(2005)	Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1464 - 92(2005)	Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1480 - 92(2004)	Standard Terminology of Facility Management (Building-Related)
E1660 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663 - 03	Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Cleanliness
E1679 - 95(2005)	Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1692 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693 - 95(2005)	Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694 - 95a(2005)	Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1700 - 95(2005)	Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701 - 95(2005)	Standard Classification for Serviceability of an Office Facility for Manageability
E1836 - 08	Standard Practice for Building Floor Area Measurements for Facility Management
E2026 - 07	Standard Guide for Seismic Risk Assessment of Buildings
E2136 - 04	Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
E2151 - 02	Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
E2156 - 04	Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
E2267 - 04	Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality
E2320 - 04	Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2351 - 04a	Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality
E2557 - 07	Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
E2619 - 08	Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

Building Standards

List of building standards developed by ASTM:

Other standards developed by ASTM committees: