|
Concrete Laboratories
Manager: Richard Meininger
Purpose
The Concrete Laboratories provide support in the following areas: Investigating
the properties and performance of
portland cement concrete (PCC) and its component materials (cement,
aggregate, admixtures, etc.); evaluating and developing new or improved
equipment and procedures for assessing properties and performance of
PCC, and practices for materials selection, mixture proportioning, and
construction of PCC; mixing, casting, and testing of PCC test specimens
in support of other researchers at the Turner-Fairbank Highway Research
Center (TFHRC); specialized testing and forensic investigations on PCC
to assist State DOTs in research and troubleshooting problems with existing
pavements and structures.
Description
The Concrete Laboratories consist of several laboratories that are equipped with
standard laboratory equipment (ovens, scales, etc.), as well as specialized
equipment for concrete testing. The laboratories function as a unit to provide
facilities for research on PCC and its constituent materials.
- The Aggregate and Sample Preparation Laboratory provides facilities for
the preparation of aggregate samples for concrete and the preparation of
hardened cement paste, mortar, or concrete specimens for testing and analysis.
Equipment includes two rock crushers, a pulverizer, a vibrating screen, a Gilson
TestMaster, standard sieves, a Videograder (for automated sizing and shape
analysis of aggregate), two water-cooled saws, lapping wheels, a lathe for
profile grinding, and a muffle furnace.
-
The Concrete Curing/Maturity Laboratory provides facilities for curing of
concrete specimens under standard or other controlled conditions and assessment
of curing-related properties, such as degree of hydration, maturity, and
shrinkage. Equipment includes three heated curing tanks, two walk-in
environmental chambers (2.4-m [8 ft by 8 ft]), and a 189.3-l (50-gallon) water
bath.
-
The Concrete Durability Laboratory provides facilities for investigating the
effects of chemical and environmental exposure on concrete. The laboratory is
equipped to assess alkali-aggregate reaction; sulfate attack; chloride
penetration; freezing, thawing, and thermal effects. Equipment includes an
automated freeze-thaw, chamber with the capacity for 60 specimens, thermal
coefficient test frames (developed in-house) and bath, and computer-controlled
chloride penetration test equipment.
-
The Mechanical Properties Laboratory provides facilities for testing the
mechanical properties of concrete, steel, and composites. Equipment includes
three servo-controlled universal testing machines with capacities ranging from
267 kN to 1,780 kN (60,000 lbs. to 400,000 lbs.), a 4,448 kN (1,000,000-lb.)
compression testing machine, a compressometer/extensometer, and four creep
frames.
-
The Plastic Concrete Laboratory provides facilities for batching and mixing
cement paste, mortar, and concrete; and for performing tests on fresh (plastic)
cement paste, mortar, and concrete. Two drum mixers and a two-cubic-foot pan
mixer are available for mixing.
-
The Petrographic Laboratory provides facilities for preparing for and
conducting petrographic and microscopic investigations of aggregate, PCC, and
asphalt concrete. Equipment includes several types of microscopes (including an
epi-fluorescent polarizing microscope), a semi-automated air void analysis
system, image analysis hardware/ software, and thin-section preparation
equipment.
Petrographic Methods of Examining Hardened Concrete: A Petrographic Manual, FHWA-HRT-04-150, July 2006
Lab Value
TFHRC's Concrete Laboratories provide an FHWA-wide resource for concrete related
specialized testing, evaluation of new test methods, concrete materials
research, and concrete forensics. Since the Concrete laboratories are on site at
TFHRC, lab personnel have access to many disciplines of engineering to provide
innovative solutions to challenges faced by the FHWA community.
In more detail, the labs provide the following services:
-
Concrete related specialized testing: The investment made in equipment and
training in the Concrete Laboratories gives the lab the ability to evaluate
properties of concrete from materials selection, mixture design, plastic
properties related to placement, and long term durability. The holistic approach
from materials to long-term durability becomes more important as the demands
for a more durable, longer service life concrete has become the standard.
-
Evaluation of new test methods:
With equipment available on site and the resources of an on site Electronic
Laboratory and Machine Shop, the Concrete Laboratories have the ability
to evaluate and develop new test methods. Recognizing a need in the
design community, the labs developed the
Coefficient of Thermal Expansion of Concrete test method that is
now an American Association of State Highway and Transportation Officials
(AASHTO) Provisional Specification. The labs also act as an evaluator
of proposed test methods, making recommendations for test suitability
and forwarding results to the Mobile Concrete Laboratory (operated by
the Office of Pavement Technology) and to other appropriate teams.
-
Concrete materials research: The labs have the capabilities to perform
concrete materials research ranging from the micro scale to the macro scale,
from materials characterization to materials distress mitigation.
-
Concrete forensics: When problems
do occur and a decision must be made to determine the most life-cycle
cost-effective repair to the structure or pavement, understanding the
cause of the failure is an important decision-making tool. The Concrete
Laboratories have the capabilities needed to provide this service in
conjunction with other laboratories on site to find the cause of the
failure and to provide input on how to mitigate the problem.
Products and Services
-
An AASHTO provisional standard test method for measurement of the
coefficient of thermal expansion (CTE) of concrete.
-
An interactive Web-based program for optimizing concrete mixtures using
statistical methods.
-
Papers presented/published on thermal coefficient testing, alkali silica
reaction (ASR) testing, freeze-thaw durability, mixture optimization.
-
Assistance provided to Delaware, the District of Columbia, Missouri, Texas,
Pennsylvania, and Puerto Rico in research or in troubleshooting concrete
problems.
Lab Partners
The Concrete Laboratories have been, and are currently, involved in cooperative
efforts with various partners. The laboratories also provide assistance to
customers such as State DOTs and other Federal Highway Administration (FHWA)
researchers.
- Cooperative research with the National Institute of Standard and
Technology (NIST) on concrete mixture optimization and curing.
-
Assistance to Missouri DOT on a project involving image analysis of air
voids in concrete.
- Troubleshooting/forensic investigations of concrete problems for Delaware,
the District of Columbia, and Puerto Rico.
-
Participation in the field evaluation of a new test method for an FHWA
contract project on chloride penetration.
-
Materials testing for the Accelerated Load Facility (ALF)/Ultra-Thin
Whitetopping (UTW) project (sponsored by industry).
- Support for other FHWA research efforts at TFHRC involving concrete, such as
research projects on DEF and chloride assessment.
Current Projects
- Investigation of ASR test methods for concrete mixtures.
- Investigation of the durability of concrete with marginal air contents and
improved methods for characterizing damage in freeze-thaw tests.
- Evaluation of the US Army Corps of Engineers (USACE) workability device.
- Ongoing assistance to States and other researchers at TFHRC.
-
CTE testing in support of the Long Term Pavement Performance Program
(LTPP).
Expertise
The labs combine the expertise of the FHWA laboratory manager, a materials
engineer with wide ranging training and experience in the areas of concrete
making materials, concrete behavior and concrete testing. Particular expertise
is possessed in the analysis of air void systems in concrete as they relate to
concrete freeze-thaw durability; the Concrete Lab manager, a Materials engineer
with 18 years of civil engineering materials experience in a research and
development environment with focus on the durability of High Performance
Concrete for pavements and structures with specific interests in cracking and
shrinkage performance; the staff petrographer, a PhD in Civil Engineering with 2
years experience as a petrographer and several additional years of experience in
cement chemistry and admixture development; and three concrete technicians with
basic concrete testing skills. Technician training includes American Concrete
Institute (ACI) certification and attending the National Ready Mixed Concrete
Association (NRMCA) Short Course on concrete and aggregates. Additional
experience includes cement chemistry, geology, concrete corrosion, and
non-destructive test techniques.
Statistics
The Concrete Laboratories developed the Coefficient of Thermal Expansion of
Concrete test method that is now an AASHTO Provisional Standard. This property
is important to the performance of concrete in all types of structures,
including pavements and bridges. The 2002 AASHTO Pavement Design Guide,
currently under development, will utilize results from this test as one of the
inputs in order to determine the proper pavement design.
.............................................
Back to Laboratory List
|
|