Traffic Flow/Control
|
Without adequate signs and postings that warn workers of potential
hazards, collisions and other vehicle accidents are likely to
happen. OSHA requires that hazardous crossings be plainly posted and
appropriate traffic control devices be used.
|
|
|
|
Hazards/Solutions:
Workers may suffer from a collision with
traffic vehicles or equipment if traffic control devices are not
in place. Lumber packages or piles may become unstable and injure
workers if overhead and side clearance is inadequate or not marked
plainly.
Railroad tracks
and other hazardous crossings must be plainly posted and
appropriate traffic control devices need to be utilized. 1910.265(c)(31)(i)
All
areas of restricted side or overhead clearance must be plainly
marked. 1910.265(c)(31)(ii)
Pickup
and unloading points and paths for lumber packages on conveyors
and transfers and other areas where accurate spotting is required,
must be plainly marked and wheel stops provided where necessary. 1910.265(c)(31)(iii)
Aisles,
passageways, and roadways must be wide enough to provide safe side
clearance. One-way aisles may be used for two-way traffic if
suitable turnouts are provided. 1910.265(c)(31)(iv)
|
|
|
|
| Home
| Log Handling
| Log Breakdown
| Dry
Kilns
| Lumber Storage
|
| Plant-Wide Hazards
| Definitions
| Additional
References
| User
Guide
| Credits
|
|
|