[Code of Federal Regulations]
[Title 46, Volume 4]
[Revised as of October 1, 2002]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR98.25-15]

[Page 85]
 
                           TITLE 46--SHIPPING
 
    CHAPTER I--COAST GUARD, DEPARTMENT OF TRANSPORTATION (CONTINUED)
 
PART 98--SPECIAL CONSTRUCTION, ARRANGEMENT, AND OTHER PROVISIONS FOR CERTAIN DANGEROUS CARGOES IN BULK--Table of Contents
 
                Subpart 98.25--Anhydrous Ammonia in Bulk
 
Sec. 98.25-15  Markings.

    (a) Cargo tanks shall be marked in accordance with the requirements 
of Sec. 54.10-20 of subchapter F (Marine Engineering) of this chapter.
    (b) In addition to the markings required to be stamped on the tank, 
the legend, ``Anhydrous Ammonia'' shall be conspicuously and legibly 
marked upon the dome or upper portion of the tank in letters at least 4 
inches high.
    (c) All tank inlet and outlet connections, except safety relief 
valves, liquid level gaging devices and pressure gages shall be labeled 
to designate whether they terminate in the vapor or liquid space. Labels 
of noncorrosive material may be attached to valves.
    (d) All tank markings shall be permanently and legibly stamped in a 
readily visible position. If the tanks are lagged, the markings attached 
to the tank proper shall be duplicated on a corrosion resistant plate 
secured to the outside jacket of the lagging.

[CGFR 65-50, 30 FR 17022, Dec. 30, 1965, as amended by CGFR 68-82, 33 FR 
18902, Dec. 18, 1968]