Basic Requirements for Fully Wrapped Carbon-Fiber Reinforced Aluminum Lined Cylinders | Used by OHM as the basis for evaluating fully wrapped carbon-fiber reinforced cylinders. | Mar 1, 2007 |
Chemical and Metallurgical Analysis of Ruptured DOT-3AL Specification Compressed Gas Cylinder | North Miami Beach, FL | Jun 1, 1994 |
Confirmation of Filling Densities | Listed in the United Nation (UN) Model Regulations, Volume I, Thirteenth revised edition. | Nov 1, 2002 |
DOT FRP-1 Standard, Basic Requirements For Fiber Reinforced Plastic Type 3FC Composite Cylinders | Used by OHM as the basis for evaluating Type 3FC Composite Cylinders. | Feb 17, 1987 |
DOT FRP-2 Standard, Basic Requirements For Fiber Reinforced Plastic Type 3HW Composite Cylinders | Used by OHM as the basis for evaluating Type 3HW Composite Cylinders. | Jan 14, 1987 |
Evaluation of Nondestructive Examination for Re-qualification Of Composite Gas | This R&D has been performed to evaluate several NDE methods based on their potential ability to detect common flaws such as impact damage in composite gas cylinders. | Sep 30, 2002 |
Evaluation of Ruptured DOT-E-7235 Cylinder | Coram, NY | Mar 13, 1993 |
Fire Investigation of DOT 3AL Cylinder Failure in Luraville, FL | This report is Evaluation / Analysis of the valve that was on an Oxygen DOT 3AL cylinder that was ruptured in Luraville, FL. | Sep 1, 2006 |
Fractographic and Microstructural Examination of a Ruptured DOT-3AL Specification Compressed Gas Cylinder | Wonderlake, IL | May 3, 1993 |
Guidance for Conducting Hazardous Materials Flow Surveys | Provides step-wise guidance for conducting commodity flow studies for hazardous materials moving by highway. | Jan 31, 1995 |
Hydraulic Pressure Cycling and Performance Evaluation of DOT-3AA Cylinder | Result of a fatigue and performance testing of DOT-3-AA Seamless Steel Cylinders. | Oct 23, 2007 |
Investigation of SCBA Cylinder Failure | Eureka, CA | Mar 4, 1996 |
Metallurgical Evaluation / Analysis Reports | Metallurgical Evaluation / Analysis Reports performed on DOT-3-AA Seamless Steel Cylinder. | Jun 20, 2007 |
Metallurgical Evaluation of Anhydrous Ammonia Cargo Tank (Nurse Tank) | The report is result of a failure analysis and metallurgical analysis of a cargo tank (commonly known as a Nurse Tank). | Jun 20, 2007 |
Metallurgical Evaluation of DOT-3AL-2015 Cylinder T-57003 | Allegan City/Kalamazoo, MI | Sep 9, 1997 |
Metallurgical Evaluation of DOT-3AL-3000 Cylinder J95119 | Key Largo, FL | Mar 17, 2000 |
Metallurgical Evaluation of DOT-3AL2015 Cylinder | Union City, GA | Jul 1, 1996 |
Metallurgical Evaluation of DOT-E-6498-2216 Aluminum Gas Cylinder - T119168 | Summerfield, NC | May 3, 1999 |
Metallurgical Evaluation of DOT-E-6498-2216 Cylinder | Roxbury/Morristown, NJ | Jul 1, 1996 |
Metallurgical Evaluation of DOT-E-7042-3000 Cylinder D-99604 | Riviera Beach, FL | Feb 4, 1998 |
Neck Threads Inspection: External | Basic guidelines for the inspection and evaluation of DOT/TC cylinder (tube) mounting threads with outside diameter greater than or equal 18" | Jul 31, 2007 |
Pneumatic Pressure Test: Key Largo Cylinder (DOT-3AL-3000 Cylinder J95119) | Key Largo, FL | Oct 4, 2000 |
Procedure for Removal of Nonconforming Hazardous Materials Packagings from Service | Used by OHM as the basis for removing nonconforming packagings from service. | Jul 31, 2007 |
Rupture Evaluation Tests for Mechanical strength and Fracture Toughness for DOT-3AL-6351 T6 Alloy Cylinder | North Miami Beach, FL | Jun 1, 1994 |
Technical Support Relating to Gas Cylinders Design, Operation and Re-qualification | in the UN Model Regulations, Volume I, Thirteenth revised edition. pertaining. | Nov 1, 2002 |