Title 46--Shipping
CHAPTER I--COAST GUARD, DEPARTMENT OF TRANSPORTATION
PART 54--PRESSURE VESSELS
|
|
| 54.01-1 |
Incorporation by reference. |
|
| 54.01-2 |
Adoption of division 1 of section VIII of the ASME Code. |
|
| 54.01-5 |
Scope (modifies U-1 and U-2). |
|
| 54.01-10 |
Steam generating pressure vessels (modifies U-1(e)). |
|
| 54.01-15 |
Exemptions from shop inspection and plan approval (replaces U-1(c) (6) through (9)). |
|
| 54.01-17 |
Pressure vessel for human occupancy (PVHO). |
|
| 54.01-18 |
Plan approval. |
|
| 54.01-25 |
Miscellaneous pressure components (modifies UG-11). |
|
| 54.01-30 |
Loadings (modifies UG-22). |
|
| 54.01-35 |
Corrosion (modifies UG- 25).
|
|
| 54.01-40 |
External pressure (modifies UG-28). |
|
| 54.03-1 |
Scope. |
|
| 54.03-5 |
General. |
|
| 54.05-1 |
Scope (replaces UG-84). |
|
| 54.05-3 |
Tests required. |
|
| 54.05-5 |
Toughness test specimens. |
|
| 54.05-6 |
Toughness test temperatures. |
|
| 54.05-10 |
Certification of material toughness tests. |
|
| 54.05-15 |
Weldment toughness tests--procedure qualifications. |
|
| 54.05-16 |
Production toughness testing. |
|
| 54.05-17 |
Weld toughness test acceptance criteria. |
|
| 54.05-20 |
Impact test properties for service of 0 °F and below. |
|
| 54.05-30 |
Allowable stress values at low temperatures. |
|
| 54.10-1 |
Scope (modifies UG-90 through UG-103 and UG-115 through UG-120). |
|
| 54.10-3 |
Marine inspectors (replaces UG-90 and UG-91, and modifies UG-92 through UG-103). |
|
| 54.10-5 |
Maximum allowable working pressure (reproduces UG-98). |
|
| 54.10-10 |
Standard hydrostatic test (modifies UG-99). |
|
| 54.10-15 |
Pneumatic test (modifies UG-100). |
|
| 54.10-20 |
Marking and stamping. |
|
| 54.10-25 |
Manufacturers' data report forms (modifies UG-120). |
|
| 54.15-1 |
General (modifies UG-125 through UG-136). |
|
| 54.15-3 |
Definitions (modifies UA-60). |
|
| 54.15-5 |
Protective devices (modifies UG-125). |
|
| 54.15-10 |
Safety and relief valves (modifies UG-126). |
|
| 54.15-13 |
Rupture disks (modifies UG-127). |
|
| 54.15-15 |
Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126). |
|
| 54.15-25 |
Minimum relief capacities for cargo tanks containing compressed or liquefied gas. |
|
| 54.20-1 |
Scope (modifies UW-1 through UW-65). |
|
| 54.20-2 |
Fabrication for hazardous materials (replaces UW-2(a)). |
|
| 54.20-3 |
Design (modifies UW-9, UW-11(a), UW-13, and UW-16). |
|
| 54.20-5 |
Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48). |
|
| 54.23-1 |
Scope (modifies UB-1). |
|
| 54.25-1 |
Scope. |
|
| 54.25-3 |
Steel plates (modifies UCS-6). |
|
| 54.25-5 |
Corrosion allowance (replaces UCS-25). |
|
| 54.25-7 |
Requirement for postweld heat treatment (modifies UCS-56). |
|
| 54.25-8 |
Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57). |
|
| 54.25-10 |
Low temperature operation--ferritic steels (replaces UCS-65 through UCS-67). |
|
| 54.25-15 |
Low temperature operation--high alloy steels (modifies UHA-23(b) and UHA-51). |
|
| 54.25-20 |
Low temperature operation--ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), UHT-6, UHT-23, and UHT-82). |
|
| 54.25-25 |
Welding of quenched and tempered steels (modifies UHT-82). |
|
| 54.30-1 |
Scope. |
|
| 54.30-3 |
Introduction. |
|
| 54.30-5 |
Limitations and requirements. |
|
| 54.30-10 |
Method of performing mechanical stress relief. |
|
| 54.30-15 |
Requirement for analysis and computation. |